A vulnerability in the web-based user interface (web UI) of Cisco IOS XE Software could allow an authenticated, remote attacker with read-only privileges to inject IOS commands to an affected device. The injected commands should require a higher privilege level in order to be executed. The vulnerability is due to insufficient input validation of specific HTTP requests. An attacker could exploit this vulnerability by sending crafted HTTP requests to a specific web UI endpoint on an affected device. A successful exploit could allow the attacker to inject IOS commands to the affected device, which could allow the attacker to alter the configuration of the device or cause a denial of service (DoS) condition.

An issue was discovered in EyesOfNetwork 5.3 through 5.3-8. An authenticated web user with sufficient privileges could abuse the AutoDiscovery module to run arbitrary OS commands via the nmap_binary parameter to lilac/autodiscovery.php.

OS Command Injection vulnerability in Ruijie RG-EW1800GX B11P226_EW1800GX_10223121 allowing attackers to execute arbitrary commands via a crafted POST request to the module_get in file /usr/local/lua/dev_sta/networkConnect.lua.

An issue was discovered in SolarWinds N-Central 12.3.0.670. The sudo configuration has incorrect access control because the nable web user account is effectively able to run arbitrary OS commands as root (i.e., the use of root privileges is not limited to specific programs listed in the sudoers file).

OS Command Injection vulnerability in Ruijie RG-EW1800GX B11P226_EW1800GX_10223121 allowing attackers to execute arbitrary commands via a crafted POST request to the module_set in file /usr/local/lua/dev_config/config_retain.lua.

Ruckus through 1.5.1.0.21 is affected by remote command injection. An authenticated user can submit a query to the API (/service/v1/createUser endpoint), injecting arbitrary commands that will be executed as root user via web.py.

OS Command Injection vulnerability in Ruijie RG-BCR RG-BCR600W allowing attackers to execute arbitrary commands via a crafted POST request to the get_wanobj in file /usr/lib/lua/luci/controller/admin/common.lua.

Maxum Rumpus 8.2.13 and 8.2.14 is affected by a command injection vulnerability. The web administration contains functionality in which administrators are able to manage users. The edit users form contains a parameter vulnerable to command injection due to insufficient validation.

OS Command Injection vulnerability in Ruijie RG-BCR RG-BCR860 allowing attackers to execute arbitrary commands via a crafted POST request to the action_wireless in file /usr/lib/lua/luci/control/admin/wireless.lua.

OS Command Injection vulnerability in Ruijie M18 EW_3.0(1)B11P226_M18_10223116 allowing attackers to execute arbitrary commands via a crafted POST request to the module_get in file /usr/local/lua/dev_sta/networkConnect.lua.

In systeminformation (npm package) before version 4.31.1 there is a command injection vulnerability. The problem was fixed in version 4.31.1 with a shell string sanitation fix.

MailGates and MailAudit products contain Command Injection flaw, which can be used to inject and execute system commands from the cgi parameter after attackers obtain the user’s access token.

XStream before version 1.4.14 is vulnerable to Remote Code Execution.The vulnerability may allow a remote attacker to run arbitrary shell commands only by manipulating the processed input stream. Only users who rely on blocklists are affected. Anyone using XStream's Security Framework allowlist is not affected. The linked advisory provides code workarounds for users who cannot upgrade. The issue is fixed in version 1.4.14.

FreePBX is an open-source web-based graphical user interface. From 17.0.19.11 to before 17.0.21, authenticated users of the Administrator Control Panel (ACP) can run arbitrary shell commands by maliciously changing languages of the framework module. This vulnerability is fixed in 17.0.21.

An issue was discovered on Enphase Envoy R3.x and D4.x (and other current) devices. The upgrade_start function in /installer/upgrade_start allows remote authenticated users to execute arbitrary commands via the force parameter.

OS Command Injection vulnerability in Ruijie RG-BCR RG-BCR860 allowing attackers to execute arbitrary commands via a crafted POST request to the action_diagnosis in file /usr/lib/lua/luci/controller/admin/diagnosis.lua.

OS Command Injection vulnerability in Ruijie RG-EW1800GX PRO B11P226_EW1800GX-PRO_10223117 allowing attackers to execute arbitrary commands via a crafted POST request to the module_get in file /usr/local/lua/dev_sta/networkConnect.lua.

An issue was discovered on D-Link DSR-250 3.17 devices. Certain functionality in the Unified Services Router web interface could allow an authenticated attacker to execute arbitrary commands, due to a lack of validation of inputs provided in multipart HTTP POST requests.

Multiple OS command injection vulnerabilities exist in the swctrl functionality of Planet WGR-500 v1.3411b190912. A specially crafted network request can lead to arbitrary command execution. An attacker can send a network request to trigger these vulnerabilities.This command injection is related to the `new_device_name` request parameter.

D-Link DAP-1360U before 3.0.1 devices allow remote authenticated users to execute arbitrary commands via shell metacharacters in the IP JSON value for ping (aka res_config_action=3&res_config_id=18).

TOTOLINK A3002RU-V2.0.0 B20190814.1034 allows authenticated remote users to modify the system's 'Run Command'. An attacker can use this functionality to execute arbitrary OS commands on the router.

Autolab is a course management service, initially developed by a team of students at Carnegie Mellon University, that enables instructors to offer autograded programming assignments to their students over the Web. A remote code execution vulnerability was discovered in Autolab's MOSS functionality, whereby an instructor with access to the feature might be able to execute code on the server hosting Autolab. This vulnerability has been patched in version 2.10.0. As a workaround, disable the MOSS feature if it is unneeded by replacing the body of `run_moss` in `app/controllers/courses_controller.rb` with `render(plain: "Feature disabled", status: :bad_request) && return`.

This command injection vulnerability allows attackers to execute arbitrary commands in a compromised application. QNAP have already fixed this vulnerability in the following versions of QTS and QuTS hero.

A vulnerability has been discovered in BigTree CMS 4.4.10 and earlier which allows an authenticated attacker to execute arbitrary commands through a crafted request sent to the server via the 'Create a New Setting' function.

A remote code execution vulnerability is identified in FruityWifi through 2.4. Due to improperly escaped shell metacharacters obtained from the POST request at the page_config_adv.php page, it is possible to perform remote code execution by an authenticated attacker. This is similar to CVE-2018-17317.

An issue was discovered in RiteCMS 2.2.1. An authenticated user can directly execute system commands by uploading a php web shell in the "Filemanager" section.

Nagios XI 5.7.2 is affected by a remote code execution (RCE) vulnerability. An authenticated user can inject additional commands into normal webapp query.

httpd on TP-Link TL-WPA4220 devices (versions 2 through 4) allows remote authenticated users to execute arbitrary OS commands by sending crafted POST requests to the endpoint /admin/powerline. Fixed version: TL-WPA4220(EU)_V4_201023

An issue was discovered on Gemtek WRTM-127ACN 01.01.02.141 and WRTM-127x9 01.01.02.127 devices. The Monitor Diagnostic network page allows an authenticated attacker to execute a command directly on the target machine. Commands are executed as the root user (uid 0). (Even if a login is required, most routers are left with default credentials.)

An issue was discovered in includes/webconsole.php in RaspAP 2.5. With authenticated access, an attacker can use a misconfigured (and virtually unrestricted) web console to attack the underlying OS (Raspberry Pi) running this software, and execute commands on the system (including ones for uploading of files and execution of code).

Zyxel VMG5313-B30B router on firmware 5.13(ABCJ.6)b3_1127, and possibly older versions of firmware are affected by shell injection.

The management website of the Verint S5120FD Verint_FW_0_42 unit features a CGI endpoint ('ipfilter.cgi') that allows the user to manage network filtering on the unit. This endpoint is vulnerable to a command injection. An authenticated attacker can leverage this issue to execute arbitrary commands as 'root'.

The Yale WIPC-303W 2.21 through 2.31 camera is vulnerable to remote command execution (RCE) through command injection via the HTTP API. NOTE: This may be a duplicate of CVE-2020-10176

UCOPIA Wi-Fi appliances 6.0.5 allow authenticated remote attackers to escape the restricted administration shell CLI, and access a shell with admin user rights, via an unprotected less command.

reNgine before 2.1.2 allows OS Command Injection if an adversary has a valid session ID. The attack places shell metacharacters in an api/tools/waf_detector/?url= string. The commands are executed as root via subprocess.check_output.

Linksys AX3200 1.1.00 is vulnerable to OS command injection by authenticated users via shell metacharacters to the diagnostics traceroute page.

ShopXO v1.8.1 has a command execution vulnerability. Attackers can use this vulnerability to execute arbitrary commands and gain control of the server.

iWT Ltd FaceSentry Access Control System 6.4.8 suffers from an authenticated OS command injection vulnerability using default credentials. This can be exploited to inject and execute arbitrary shell commands as the root user via the 'strInIP' POST parameter in pingTest PHP script.

A improper neutralization of special elements used in an os command ('os command injection') vulnerability in Fortinet FortiManager Cloud 7.6.0 through 7.6.1, FortiManager Cloud 7.4.0 through 7.4.4, FortiManager Cloud 7.2.2 through 7.2.7, FortiManager 7.6.0 through 7.6.1, FortiManager 7.4.0 through 7.4.5, FortiManager 7.2.1 through 7.2.8 may allow an authenticated remote attacker to execute unauthorized code via FGFM crafted requests.

Jenkins Selection tasks Plugin 1.0 and earlier executes a user-specified program on the Jenkins controller, allowing attackers with Job/Configure permission to execute an arbitrary system command on the Jenkins controller as the OS user that the Jenkins process is running as.

Jenkins Play Framework Plugin 1.0.2 and earlier lets users specify the path to the `play` command on the Jenkins master for a form validation endpoint, resulting in an OS command injection vulnerability exploitable by users able to store such a file on the Jenkins master.

Unibox U-50 2.4 and UniBox Enterprise Series 2.4 and UniBox Campus Series 2.4 contain a OS command injection vulnerability in /tools/ping, which can leads to complete device takeover.

Jenkins Perfecto Plugin 1.17 and earlier executes a command on the Jenkins controller, allowing attackers with Job/Configure permission to run arbitrary commands on the Jenkins controller

/graphStatus/displayServiceStatus.php in Centreon 19.10.8 allows remote attackers to execute arbitrary OS commands via shell metacharacters in the RRDdatabase_path parameter.

Jenkins CryptoMove Plugin 0.1.33 and earlier allows attackers with Job/Configure access to execute arbitrary OS commands on the Jenkins master as the OS user account running Jenkins.

Inim Electronics SmartLiving SmartLAN/G/SI <=6.x suffers from an authenticated remote command injection vulnerability. The issue exist due to the 'par' POST parameter not being sanitized when called with the 'testemail' module through web.cgi binary. The vulnerable CGI binary (ELF 32-bit LSB executable, ARM) is calling the 'sh' executable via the system() function to issue a command using the mailx service and its vulnerable string format parameter allowing for OS command injection with root privileges. An attacker can remotely execute system commands as the root user using default credentials and bypass access controls in place.

FPT G-97RG6M R4.2.98.035 and G-97RG3 R4.2.43.078 are vulnerable to Remote Command Execution in the ping function.

An OS Command Injection vulnerability in PAN-OS management server allows authenticated users to inject and execute arbitrary shell commands with root privileges. This issue affects: All versions of PAN-OS 7.1 and 8.0; PAN-OS 8.1 versions earlier than 8.1.14; PAN-OS 9.0 versions earlier than 9.0.7.

A command injection vulnerability exists in the IOCTL that manages OTA updates. A specially crafted command can lead to command execution as the root user. An attacker can make authenticated requests to trigger this vulnerability.