Cloudflare quiche was discovered to be vulnerable to unbounded storage of information related to connection ID retirement, which could lead to excessive resource consumption. Each QUIC connection possesses a set of connection Identifiers (IDs); see RFC 9000 Section 5.1 https://datatracker.ietf.org/doc/html/rfc9000#section-5.1 . Endpoints declare the number of active connection IDs they are willing to support using the active_connection_id_limit transport parameter. The peer can create new IDs using a NEW_CONNECTION_ID frame but must stay within the active ID limit. This is done by retirement of old IDs, the endpoint sends NEW_CONNECTION_ID includes a value in the retire_prior_to field, which elicits a RETIRE_CONNECTION_ID frame as confirmation. An unauthenticated remote attacker can exploit the vulnerability by sending NEW_CONNECTION_ID frames and manipulating the connection (e.g. by restricting the peer's congestion window size) so that RETIRE_CONNECTION_ID frames can only be sent at a slower rate than they are received, leading to storage of information related to connection IDs in an unbounded queue. Quiche versions 0.19.2 and 0.20.1 are the earliest to address this problem. There is no workaround for affected versions.

ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 6.9.13-47 and 7.1.2-22, because of a missing check in the MNG coder it would be possible to read more images than the list limit policy would allow resulting in excessive resource use. This issue has been patched in versions 6.9.13-47 and 7.1.2-22.

An issue was discovered in Prosody before 0.12.6 and 1.0.0 through 13.0.0 before 13.0.5. A Denial of Service can occur via memory exhaustion caused by memory leaks from unauthenticated connections.

Python-Multipart is a streaming multipart parser for Python. Versions prior to 0.0.26 have a denial of service vulnerability when parsing crafted `multipart/form-data` requests with large preamble or epilogue sections. Upgrade to version 0.0.26 or later, which skips ahead to the next boundary candidate when processing leading CR/LF data and immediately discards epilogue data after the closing boundary.

A vulnerability in ICMP Version 6 (ICMPv6) processing in Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a slow system memory leak, which over time could lead to a denial of service (DoS) condition. This vulnerability is due to improper error handling when an IPv6-configured interface receives a specific type of ICMPv6 packet. An attacker could exploit this vulnerability by sending a sustained rate of crafted ICMPv6 packets to a local IPv6 address on a targeted device. A successful exploit could allow the attacker to cause a system memory leak in the ICMPv6 process on the device. As a result, the ICMPv6 process could run out of system memory and stop processing traffic. The device could then drop all ICMPv6 packets, causing traffic instability on the device. Restoring device functionality would require a device reboot.

ws is an open source WebSocket client and server library for Node.js. A specially crafted value of the `Sec-Websocket-Protocol` header can be used to significantly slow down a ws server. The vulnerability has been fixed in ws@7.4.6 (https://github.com/websockets/ws/commit/00c425ec77993773d823f018f64a5c44e17023ff). In vulnerable versions of ws, the issue can be mitigated by reducing the maximum allowed length of the request headers using the [`--max-http-header-size=size`](https://nodejs.org/api/cli.html#cli_max_http_header_size_size) and/or the [`maxHeaderSize`](https://nodejs.org/api/http.html#http_http_createserver_options_requestlistener) options.

pypdf is a free and open-source pure-python PDF library. Prior to version 6.7.4, an attacker who uses this vulnerability can craft a PDF which leads to large memory usage. This requires parsing the content stream using the RunLengthDecode filter. This has been fixed in pypdf 6.7.4. As a workaround, consider applying the changes from PR #3664.

JPA Server in HAPI FHIR before 5.4.0 allows a user to deny service (e.g., disable access to the database after the attack stops) via history requests. This occurs because of a SELECT COUNT statement that requires a full index scan, with an accompanying large amount of server resources if there are many simultaneous history requests.

A mail message containing excessive amount of RFC 2231 MIME parameters causes LMTP to use too much CPU. A suitably formatted mail message causes mail delivery process to consume large amounts of CPU time. Use MTA capabilities to limit RFC 2231 MIME parameters in mail messages, or upgrade to fixed version where the processing is limited. No publicly available exploits are known.

ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to version 7.1.2-15, a memory leak in the ASHLAR image writer allows an attacker to exhaust process memory by providing a crafted image that results in small objects that are allocated but never freed. Version 7.1.2-15 contains a patch.

ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 7.1.2-15 and 6.9.13-40, memory leak exists in `coders/msl.c`. In the `WriteMSLImage` function of the `msl.c` file, resources are allocated. But the function returns early without releasing these allocated resources. Versions 7.1.2-15 and 6.9.13-40 contain a patch.

ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 7.1.2-15 and 6.9.13-40, in `ReadSTEGANOImage()` (`coders/stegano.c`), the `watermark` Image object is not freed on three early-return paths, resulting in a definite memory leak (~13.5KB+ per invocation) that can be exploited for denial of service. Versions 7.1.2-15 and 6.9.13-40 contain a patch.

ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to version 7.1.2-15, a memory leak exists in `coders/ashlar.c`. The `WriteASHLARImage` allocates a structure. However, when an exception is thrown, the allocated memory is not properly released, resulting in a potential memory leak. Version 7.1.2-15 contains a patch.

ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 7.1.2-15 and 6.9.13-40, sometimes msl.c fails to update the stack index, so an image is stored in the wrong slot and never freed on error, causing leaks. Versions 7.1.2-15 and 6.9.13-40 contain a patch.

ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 7.1.2-15 and 6.9.13-40, Magick fails to check for multi-layer nested mvg conversions to svg, leading to DoS. Versions 7.1.2-15 and 6.9.13-40 contain a patch.

CryptoLib provides a software-only solution using the CCSDS Space Data Link Security Protocol - Extended Procedures (SDLS-EP) to secure communications between a spacecraft running the core Flight System (cFS) and a ground station. Prior to version 1.4.3, the cryptography_encrypt() function allocates multiple buffers for HTTP requests and JSON parsing that are never freed on any code path. Each call leaks approximately 400 bytes of memory. Sustained traffic can gradually exhaust available memory. This issue has been patched in version 1.4.3.

A vulnerability in the Remote Access SSL VPN, HTTP management and MUS functionality, of Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to exhaust device memory resulting in a denial of service (DoS) condition requiring a manual reboot. This vulnerability is due to trusting user input without validation. An attacker could exploit this vulnerability by sending crafted packets to the Remote Access SSL VPN server. A successful exploit could allow the attacker to cause the device to stop responding, resulting in a DoS condition.

webtransport-go is an implementation of the WebTransport protocol. Prior to v0.10.0, an attacker can cause a denial of service in webtransport-go by preventing or indefinitely delaying WebTransport session closure. A malicious peer can withhold QUIC flow control credit on the CONNECT stream, blocking transmission of the WT_CLOSE_SESSION capsule and causing the close operation to hang. This vulnerability is fixed in v0.10.0.

webtransport-go is an implementation of the WebTransport protocol. Prior to 0.10.0, an attacker can cause unbounded memory consumption repeatedly creating and closing many WebTransport streams. Closed streams were not removed from an internal session map, preventing garbage collection of their resources. This vulnerability is fixed in v0.10.0.

A vulnerability was determined in birkir prime up to 0.4.0.beta.0. This affects an unknown function of the file /graphql of the component GraphQL Alias Handler. This manipulation causes resource consumption. The attack is possible to be carried out remotely. The exploit has been publicly disclosed and may be utilized. The project was informed of the problem early through an issue report but has not responded yet.

OpenTelemetry.Exporter.Zipkin is the .NET Zipkin exporter for OpenTelemetry. In versions 1.15.2 and earlier, the Zipkin exporter remote endpoint cache accepts unbounded key growth derived from span attributes. In high-cardinality scenarios, a process using Zipkin export for client or producer spans could experience avoidable memory growth under sustained unique remote endpoint values, increasing process memory usage over time and degrading availability. This issue is fixed in version 1.15.3, which introduces a bounded, thread-safe LRU cache for remote endpoints with a fixed maximum size.

A flaw has been found in warmcat libwebsockets up to 4.5.8. This issue affects the function lws_ssh_parse_plaintext of the file plugins/protocol_lws_ssh_base/sshd.c of the component SSH Protocol Handler. Executing a manipulation of the argument msg_len can lead to resource consumption. The attack may be launched remotely. The exploit has been published and may be used. This patch is called 3f9f0c6ecaf0e6f3f219d30632c5d1f2479d7498. A patch should be applied to remediate this issue.

A security flaw has been discovered in mixmark-io turndown up to 7.2.1. This affects an unknown function of the file src/commonmark-rules.js. Performing manipulation results in inefficient regular expression complexity. It is possible to initiate the attack remotely. The exploit has been released to the public and may be exploited.

Rack is a modular Ruby web server interface. Prior to versions 2.2.23, 3.1.21, and 3.2.6, Rack::Utils.get_byte_ranges parses the HTTP Range header without limiting the number of individual byte ranges. Although the existing fix for CVE-2024-26141 rejects ranges whose total byte coverage exceeds the file size, it does not restrict the count of ranges. An attacker can supply many small overlapping ranges such as 0-0,0-0,0-0,... to trigger disproportionate CPU, memory, I/O, and bandwidth consumption per request. This results in a denial of service condition in Rack file-serving paths that process multipart byte range responses. This issue has been patched in versions 2.2.23, 3.1.21, and 3.2.6.

Rack is a modular Ruby web server interface. Prior to versions 2.2.23, 3.1.21, and 3.2.6, Rack::Utils.select_best_encoding processes Accept-Encoding values with quadratic time complexity when the header contains many wildcard (*) entries. Because this method is used by Rack::Deflater to choose a response encoding, an unauthenticated attacker can send a single request with a crafted Accept-Encoding header and cause disproportionate CPU consumption on the compression middleware path. This results in a denial of service condition for applications using Rack::Deflater. This issue has been patched in versions 2.2.23, 3.1.21, and 3.2.6.

LiquidJS is a Shopify / GitHub Pages compatible template engine in pure JavaScript. Prior to 10.25.3, the replace filter in LiquidJS incorrectly accounts for memory usage when the memoryLimit option is enabled. It charges str.length + pattern.length + replacement.length bytes to the memory limiter, but the actual output from str.split(pattern).join(replacement) can be quadratically larger when the pattern occurs many times in the input string. This allows an attacker who controls template content to bypass the memoryLimit DoS protection with approximately 2,500x amplification, potentially causing out-of-memory conditions. This vulnerability is fixed in 10.25.3.

The Calculated Fields Form plugin for WordPress is vulnerable to Denial of Service in all versions up to, and including, 5.2.63. This is due to unlimited height and width parameters for CAPTCHA images. This makes it possible for unauthenticated attackers to send multiple requests with large values, resulting in slowing server resources if the server does not mitigate Denial of Service attacks.

Active Support is a toolkit of support libraries and Ruby core extensions extracted from the Rails framework. `NumberToDelimitedConverter` uses a lookahead-based regular expression with `gsub!` to insert thousands delimiters. Prior to versions 8.1.2.1, 8.0.4.1, and 7.2.3.1, the interaction between the repeated lookahead group and `gsub!` can produce quadratic time complexity on long digit strings. Versions 8.1.2.1, 8.0.4.1, and 7.2.3.1 contain a patch.

An uncontrolled resource consumption vulnerability in the web server of Zyxel DX3301-T0 firmware version 5.50(ABVY.6.3)C0 and earlier could allow an attacker to perform Slowloris‑style denial‑of‑service (DoS) attacks. Such attacks may temporarily block legitimate HTTP requests and partially disrupt access to the web management interface, while other networking services remain unaffected.

A weakness has been identified in CodeMirror up to 5.65.20. Affected is an unknown function of the file mode/markdown/markdown.js of the component Markdown Mode. This manipulation causes inefficient regular expression complexity. It is possible to initiate the attack remotely. The exploit has been made available to the public and could be exploited. Upgrading to version 6.0 is able to address this issue. You should upgrade the affected component. Not all code samples mentioned in the GitHub issue can be found. The repository mentions, that "CodeMirror 6 exists, and is [...] much more actively maintained."

CISA Thorium does not rate limit requests to send account verification email messages. A remote unauthenticated attacker can send unlimited messages to a user who is pending verification. Fixed in 1.1.1 by adding a rate limit set by default to 10 minutes.

An issue in Hostbill v.2025-11-24 and 2025-12-01 allows a remote attacker to cause a denial of service via the Checkout Authentication Flow component

The multiScan and picoScan are vulnerable to a denial-of-service (DoS) attack. A remote attacker can exploit this vulnerability by conducting a Slowloris-type attack, causing the web page to become unresponsive.

A vulnerability of Uncontrolled Resource Consumption has been identified in STARDOM provided by Yokogawa Electric Corporation. This vulnerability may allow to a remote attacker to cause a denial-of-service condition to the FCN/FCJ controller by sending a crafted packet. While sending the packet, the maintenance homepage of the controller could not be accessed. Therefore, functions of the maintenance homepage, changing configuration, viewing logs, etc. are not available. But the controller’s operation is not stopped by the condition. The affected products and versions are as follows: STARDOM FCN/FCJ R1.01 to R4.31.

Dell PowerScale InsightIQ, version 5.2, contains an uncontrolled resource consumption vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to denial of service.

A vulnerability was found in zhangyd-c OneBlog up to 2.3.9. It has been classified as problematic. Affected is an unknown function of the component HTTP Header Handler. The manipulation of the argument X-Forwarded-For leads to inefficient regular expression complexity. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability, which was classified as problematic, has been found in Tongda OA 2017 up to 11.7. This issue affects some unknown processing of the file /inc/package_static_resources.php. The manipulation leads to resource consumption. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.

Wazuh is a free and open source platform used for threat prevention, detection, and response. Starting in version 4.3.0 and prior to version 4.14.3, a Denial of Service (DoS) vulnerability exists in the Wazuh API authentication middleware (`middlewares.py`). The application uses an asynchronous event loop (Starlette/Asyncio) to call a synchronous function (`generate_keypair`) that performs blocking disk I/O on every request containing a Bearer token. An unauthenticated remote attacker can exploit this by flooding the API with requests containing invalid Bearer tokens. This forces the single-threaded event loop to pause for file read operations repeatedly, starving the application of CPU resources and potentially preventing it from accepting or processing legitimate connections. Version 4.14.3 fixes the issue.

Vulnerability in the Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition product of Oracle Java SE (component: JSSE). Supported versions that are affected are Oracle Java SE: 8u481, 8u481-b50, 8u481-perf, 11.0.30, 17.0.18, 21.0.10, 25.0.2, 26; Oracle GraalVM for JDK: 17.0.18 and 21.0.10; Oracle GraalVM Enterprise Edition: 21.3.17. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTPS to compromise Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition. Successful attacks of this vulnerability can result in unauthorized ability to cause a partial denial of service (partial DOS) of Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition. Note: This vulnerability can be exploited by using APIs in the specified Component, e.g., through a web service which supplies data to the APIs. This vulnerability also applies to Java deployments, typically in clients running sandboxed Java Web Start applications or sandboxed Java applets, that load and run untrusted code (e.g., code that comes from the internet) and rely on the Java sandbox for security. CVSS 3.1 Base Score 5.3 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:L).

pypdf is a free and open-source pure-python PDF library. Prior to version 6.6.0, pypdf has possible long runtimes for malformed startxref. An attacker who uses this vulnerability can craft a PDF which leads to possibly long runtimes for invalid startxref entries. When rebuilding the cross-reference table, PDF files with lots of whitespace characters become problematic. Only the non-strict reading mode is affected. Only the non-strict reading mode is affected. This issue has been patched in version 6.6.0.

pypdf is a free and open-source pure-python PDF library. Prior to version 6.6.0, pypdf has possible long runtimes for missing /Root object with large /Size values. An attacker who uses this vulnerability can craft a PDF which leads to possibly long runtimes for actually invalid files. This can be achieved by omitting the /Root entry in the trailer, while using a rather large /Size value. Only the non-strict reading mode is affected. This issue has been patched in version 6.6.0.

Synapse is a Matrix reference homeserver written in python (pypi package matrix-synapse). Matrix is an ecosystem for open federated Instant Messaging and VoIP. In Synapse before version 1.33.2 "Push rules" can specify conditions under which they will match, including `event_match`, which matches event content against a pattern including wildcards. Certain patterns can cause very poor performance in the matching engine, leading to a denial-of-service when processing moderate length events. The issue is patched in version 1.33.2. A potential workaround might be to prevent users from making custom push rules, by blocking such requests at a reverse-proxy.

Spring MVC and WebFlux applications are vulnerable to Denial of Service attacks when resolving static resources. More precisely, an application can be vulnerable when all the following are true: * the application is using Spring MVC or Spring WebFlux * the application is serving static resources from the file system * the application is running on a Windows platform When all the conditions above are met, the attacker can send malicious requests that are slow to resolve and that can keep HTTP connections in use. This can cause a Denial of Service on the application.

A vulnerability was found in JWCrypto. This flaw allows an attacker to cause a denial of service (DoS) attack and possible password brute-force and dictionary attacks to be more resource-intensive. This issue can result in a large amount of computational consumption, causing a denial of service attack.

quiche v. 0.15.0 through 0.19.0 was discovered to be vulnerable to unbounded queuing of path validation messages, which could lead to excessive resource consumption. QUIC path validation (RFC 9000 Section 8.2) requires that the recipient of a PATH_CHALLENGE frame responds by sending a PATH_RESPONSE. An unauthenticated remote attacker can exploit the vulnerability by sending PATH_CHALLENGE frames and manipulating the connection (e.g. by restricting the peer's congestion window size) so that PATH_RESPONSE frames can only be sent at the slower rate than they are received; leading to storage of path validation data in an unbounded queue. Quiche versions greater than 0.19.0 address this problem.

Mattermost fails to properly sanitize the request to /api/v4/redirect_location allowing an attacker, sending a specially crafted request to /api/v4/redirect_location, to fill up the memory due to caching large items.

For certain systems running EOS, a Precision Time Protocol (PTP) packet of a management/signaling message with an invalid Type-Length-Value (TLV) causes the PTP agent to restart. Repeated restarts of the service will make the service unavailable.

A regression was introduced in the Red Hat build of python-eventlet due to a change in the patch application strategy, resulting in a patch for CVE-2021-21419 not being applied for all builds of all products.

CometBFT is a Byzantine Fault Tolerant (BFT) middleware that takes a state transition machine and replicates it on many machines. An internal modification made in versions 0.34.28 and 0.37.1 to the way struct `PeerState` is serialized to JSON introduced a deadlock when new function MarshallJSON is called. This function can be called from two places. The first is via logs, setting the `consensus` logging module to "debug" level (should not happen in production), and setting the log output format to JSON. The second is via RPC `dump_consensus_state`. Case 1, which should not be hit in production, will eventually hit the deadlock in most goroutines, effectively halting the node. In case 2, only the data structures related to the first peer will be deadlocked, together with the thread(s) dealing with the RPC request(s). This means that only one of the channels of communication to the node's peers will be blocked. Eventually the peer will timeout and excluded from the list (typically after 2 minutes). The goroutines involved in the deadlock will not be garbage collected, but they will not interfere with the system after the peer is excluded. The theoretical worst case for case 2, is a network with only two validator nodes. In this case, each of the nodes only has one `PeerState` struct. If `dump_consensus_state` is called in either node (or both), the chain will halt until the peer connections time out, after which the nodes will reconnect (with different `PeerState` structs) and the chain will progress again. Then, the same process can be repeated. As the number of nodes in a network increases, and thus, the number of peer struct each node maintains, the possibility of reproducing the perturbation visible with two nodes decreases. Only the first `PeerState` struct will deadlock, and not the others (RPC `dump_consensus_state` accesses them in a for loop, so the deadlock at the first iteration causes the rest of the iterations of that "for" loop to never be reached). This regression was fixed in versions 0.34.29 and 0.37.2. Some workarounds are available. For case 1 (hitting the deadlock via logs), either don't set the log output to "json", leave at "plain", or don't set the consensus logging module to "debug", leave it at "info" or higher. For case 2 (hitting the deadlock via RPC `dump_consensus_state`), do not expose `dump_consensus_state` RPC endpoint to the public internet (e.g., via rules in one's nginx setup).

A security flaw has been discovered in Open5GS up to 2.7.5. This issue affects some unknown processing of the component Timer Handler. The manipulation results in resource consumption. The attack may be performed from remote. The exploit has been released to the public and may be used for attacks. The patch is identified as c7c131f8d2cb1195ada5e0e691b6868ebcd8a845. It is best practice to apply a patch to resolve this issue.