In DRM service, there is a possible system crash due to null pointer dereference. This could lead to local denial of service with System execution privileges needed.

In DRM service, there is a possible out of bounds write due to a missing bounds check. This could lead to local denial of service with System execution privileges needed.

In faceid servive, there is a possible out of bounds write due to a missing bounds check. This could lead to local denial of service with no additional execution privileges needed

In the Linux kernel, the following vulnerability has been resolved: workqueue: Fix selection of wake_cpu in kick_pool() With cpu_possible_mask=0-63 and cpu_online_mask=0-7 the following kernel oops was observed: smp: Bringing up secondary CPUs ... smp: Brought up 1 node, 8 CPUs Unable to handle kernel pointer dereference in virtual kernel address space Failing address: 0000000000000000 TEID: 0000000000000803 [..] Call Trace: arch_vcpu_is_preempted+0x12/0x80 select_idle_sibling+0x42/0x560 select_task_rq_fair+0x29a/0x3b0 try_to_wake_up+0x38e/0x6e0 kick_pool+0xa4/0x198 __queue_work.part.0+0x2bc/0x3a8 call_timer_fn+0x36/0x160 __run_timers+0x1e2/0x328 __run_timer_base+0x5a/0x88 run_timer_softirq+0x40/0x78 __do_softirq+0x118/0x388 irq_exit_rcu+0xc0/0xd8 do_ext_irq+0xae/0x168 ext_int_handler+0xbe/0xf0 psw_idle_exit+0x0/0xc default_idle_call+0x3c/0x110 do_idle+0xd4/0x158 cpu_startup_entry+0x40/0x48 rest_init+0xc6/0xc8 start_kernel+0x3c4/0x5e0 startup_continue+0x3c/0x50 The crash is caused by calling arch_vcpu_is_preempted() for an offline CPU. To avoid this, select the cpu with cpumask_any_and_distribute() to mask __pod_cpumask with cpu_online_mask. In case no cpu is left in the pool, skip the assignment. tj: This doesn't fully fix the bug as CPUs can still go down between picking the target CPU and the wake call. Fixing that likely requires adding cpu_online() test to either the sched or s390 arch code. However, regardless of how that is fixed, workqueue shouldn't be picking a CPU which isn't online as that would result in unpredictable and worse behavior.

The application does not detect or guard against cyclic PDF object references while handling JavaScript in PDF. When pages and annotations are crafted that reference each other in a loop, passing the document to APIs (e.g., SOAP) that perform deep traversal can cause uncontrolled recursion, stack exhaustion, and application crashes.

CAI Content Credentials versions c2pa-web@0.7.0, c2pa-v0.78.2 and earlier are affected by an Integer Underflow (Wrap or Wraparound) vulnerability that could result in an application denial-of-service. An attacker could exploit this vulnerability to crash the application, leading to a denial-of-service condition. Exploitation of this issue does not require user interaction.

CAI Content Credentials versions c2pa-web@0.7.0, c2pa-v0.78.2 and earlier are affected by an Uncontrolled Resource Consumption vulnerability that could lead to application denial-of-service. An attacker could exploit this vulnerability to exhaust system resources, resulting in an application denial-of-service condition. Exploitation of this issue does not require user interaction.

CAI Content Credentials versions c2pa-web@0.7.0, c2pa-v0.78.2 and earlier are affected by an Uncontrolled Resource Consumption vulnerability that could lead to application denial-of-service. An attacker could exploit this vulnerability to exhaust system resources, resulting in an application denial-of-service condition. Exploitation of this issue does not require user interaction.

CAI Content Credentials versions c2pa-web@0.7.0, c2pa-v0.78.2 and earlier are affected by an Improper Input Validation vulnerability that could result in an application denial-of-service. An attacker could exploit this vulnerability to crash the application, leading to a denial-of-service condition. Exploitation of this issue does not require user interaction.

In multiple functions of ShortcutService.java, there is a possible persistent DOS due to resource exhaustion. This could lead to local denial of service with no additional execution privileges needed. User interaction is not needed for exploitation.

CAI Content Credentials versions c2pa-web@0.7.0, c2pa-v0.78.2 and earlier are affected by an Improper Input Validation vulnerability that could result in an application denial-of-service. An attacker could exploit this vulnerability to crash the application, leading to a denial-of-service condition. Exploitation of this issue does not require user interaction.

CAI Content Credentials versions c2pa-web@0.7.0, c2pa-v0.78.2 and earlier are affected by an Improper Input Validation vulnerability that could result in an application denial-of-service. An attacker could exploit this vulnerability to crash the application, leading to a denial-of-service condition. Exploitation of this issue does not require user interaction.

CAI Content Credentials versions c2pa-web@0.7.0, c2pa-v0.78.2 and earlier are affected by an Uncontrolled Resource Consumption vulnerability that could lead to application denial-of-service. An attacker could exploit this vulnerability to exhaust system resources, resulting in an application denial-of-service condition. Exploitation of this issue does not require user interaction.

CAI Content Credentials versions c2pa-web@0.7.0, c2pa-v0.78.2 and earlier are affected by an Improper Input Validation vulnerability that could result in an application denial-of-service. An attacker could exploit this vulnerability to crash the application, leading to a denial-of-service condition. Exploitation of this issue does not require user interaction.

CAI Content Credentials versions c2pa-web@0.7.0, c2pa-v0.78.2 and earlier are affected by an Improper Input Validation vulnerability that could result in an application denial-of-service. An attacker could exploit this vulnerability to crash the application, leading to a denial-of-service condition. Exploitation of this issue does not require user interaction.

CAI Content Credentials versions c2pa-web@0.7.0, c2pa-v0.78.2 and earlier are affected by an Improper Input Validation vulnerability that could result in an application denial-of-service. An attacker could exploit this vulnerability to crash the application, leading to a denial-of-service condition. Exploitation of this issue does not require user interaction.

CAI Content Credentials versions c2pa-web@0.7.0, c2pa-v0.78.2 and earlier are affected by an Integer Underflow (Wrap or Wraparound) vulnerability that could result in an application denial-of-service. An attacker could exploit this vulnerability to crash the application, leading to a denial-of-service condition. Exploitation of this issue does not require user interaction.

Windows Hyper-V Denial of Service Vulnerability

In the Linux kernel, the following vulnerability has been resolved: ASoC: qcom: Fix uninitialized pointer dmactl In the case where __lpass_get_dmactl_handle is called and the driver id dai_id is invalid the pointer dmactl is not being assigned a value, and dmactl contains a garbage value since it has not been initialized and so the null check may not work. Fix this to initialize dmactl to NULL. One could argue that modern compilers will set this to zero, but it is useful to keep this initialized as per the same way in functions __lpass_platform_codec_intf_init and lpass_cdc_dma_daiops_hw_params. Cleans up clang scan build warning: sound/soc/qcom/lpass-cdc-dma.c:275:7: warning: Branch condition evaluates to a garbage value [core.uninitialized.Branch]

In the Linux kernel, the following vulnerability has been resolved: powerpc/pseries/iommu: LPAR panics during boot up with a frozen PE At the time of LPAR boot up, partition firmware provides Open Firmware property ibm,dma-window for the PE. This property is provided on the PCI bus the PE is attached to. There are execptions where the partition firmware might not provide this property for the PE at the time of LPAR boot up. One of the scenario is where the firmware has frozen the PE due to some error condition. This PE is frozen for 24 hours or unless the whole system is reinitialized. Within this time frame, if the LPAR is booted, the frozen PE will be presented to the LPAR but ibm,dma-window property could be missing. Today, under these circumstances, the LPAR oopses with NULL pointer dereference, when configuring the PCI bus the PE is attached to. BUG: Kernel NULL pointer dereference on read at 0x000000c8 Faulting instruction address: 0xc0000000001024c0 Oops: Kernel access of bad area, sig: 7 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries Modules linked in: Supported: Yes CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.4.0-150600.9-default #1 Hardware name: IBM,9043-MRX POWER10 (raw) 0x800200 0xf000006 of:IBM,FW1060.00 (NM1060_023) hv:phyp pSeries NIP: c0000000001024c0 LR: c0000000001024b0 CTR: c000000000102450 REGS: c0000000037db5c0 TRAP: 0300 Not tainted (6.4.0-150600.9-default) MSR: 8000000002009033 <SF,VEC,EE,ME,IR,DR,RI,LE> CR: 28000822 XER: 00000000 CFAR: c00000000010254c DAR: 00000000000000c8 DSISR: 00080000 IRQMASK: 0 ... NIP [c0000000001024c0] pci_dma_bus_setup_pSeriesLP+0x70/0x2a0 LR [c0000000001024b0] pci_dma_bus_setup_pSeriesLP+0x60/0x2a0 Call Trace: pci_dma_bus_setup_pSeriesLP+0x60/0x2a0 (unreliable) pcibios_setup_bus_self+0x1c0/0x370 __of_scan_bus+0x2f8/0x330 pcibios_scan_phb+0x280/0x3d0 pcibios_init+0x88/0x12c do_one_initcall+0x60/0x320 kernel_init_freeable+0x344/0x3e4 kernel_init+0x34/0x1d0 ret_from_kernel_user_thread+0x14/0x1c

A buffer overflow was addressed with improved size validation. This issue is fixed in macOS Tahoe 26.4. A buffer overflow may result in memory corruption and unexpected app termination.

The issue was addressed with improved memory handling. This issue is fixed in macOS Sonoma 14.4. Processing a file may lead to a denial-of-service or potentially disclose memory contents.

A buffer overflow was addressed with improved input validation. This issue is fixed in iOS 18.7.9 and iPadOS 18.7.9, iOS 26.5 and iPadOS 26.5, macOS Sequoia 15.7.7, macOS Sonoma 14.8.7, macOS Tahoe 26.5, tvOS 26.5, visionOS 26.5, watchOS 26.5. A local user may be able to cause unexpected system termination or read kernel memory.

A type confusion issue was addressed with improved memory handling. This issue is fixed in iOS 26.4 and iPadOS 26.4, macOS Sequoia 15.7.5, macOS Sonoma 14.8.5, macOS Tahoe 26.4, tvOS 26.4, visionOS 26.4, watchOS 26.4. An attacker may be able to cause unexpected app termination.

The issue was addressed with improved bounds checks. This issue is fixed in iOS 18.7.9 and iPadOS 18.7.9, iOS 26.5 and iPadOS 26.5, macOS Sequoia 15.7.7, macOS Sonoma 14.8.7, macOS Tahoe 26.5, tvOS 26.5, visionOS 26.5, watchOS 26.5. Processing a maliciously crafted file may lead to unexpected app termination.

A permissions issue was addressed with additional restrictions. This issue is fixed in iOS 17.3 and iPadOS 17.3, macOS Monterey 12.7.4, macOS Sonoma 14.3, macOS Ventura 13.6.5, tvOS 17.3, watchOS 10.3. An app may be able to cause a denial-of-service.

Divide by zero in Microsoft Graphics Component allows an unauthorized attacker to deny service locally.

Null pointer dereference in Microsoft Graphics Component allows an unauthorized attacker to deny service locally.

A flaw was found in the subsequent get_user_pages_fast in the Linux kernel’s interface for symmetric key cipher algorithms in the skcipher_recvmsg of crypto/algif_skcipher.c function. This flaw allows a local user to crash the system.

In the Linux kernel, the following vulnerability has been resolved: net: ks8851: Queue RX packets in IRQ handler instead of disabling BHs Currently the driver uses local_bh_disable()/local_bh_enable() in its IRQ handler to avoid triggering net_rx_action() softirq on exit from netif_rx(). The net_rx_action() could trigger this driver .start_xmit callback, which is protected by the same lock as the IRQ handler, so calling the .start_xmit from netif_rx() from the IRQ handler critical section protected by the lock could lead to an attempt to claim the already claimed lock, and a hang. The local_bh_disable()/local_bh_enable() approach works only in case the IRQ handler is protected by a spinlock, but does not work if the IRQ handler is protected by mutex, i.e. this works for KS8851 with Parallel bus interface, but not for KS8851 with SPI bus interface. Remove the BH manipulation and instead of calling netif_rx() inside the IRQ handler code protected by the lock, queue all the received SKBs in the IRQ handler into a queue first, and once the IRQ handler exits the critical section protected by the lock, dequeue all the queued SKBs and push them all into netif_rx(). At this point, it is safe to trigger the net_rx_action() softirq, since the netif_rx() call is outside of the lock that protects the IRQ handler.

Null pointer dereference in Windows Remote Access Connection Manager allows an unauthorized attacker to deny service locally.

A use after free issue was addressed with improved memory management. This issue is fixed in iOS 18.7.7 and iPadOS 18.7.7, iOS 26.3 and iPadOS 26.3, macOS Sequoia 15.7.5, macOS Sonoma 14.8.5, macOS Tahoe 26.3, tvOS 26.3, visionOS 26.3, watchOS 26.3. An app may be able to cause unexpected system termination.

In the Linux kernel, the following vulnerability has been resolved: uio_hv_generic: Don't free decrypted memory In CoCo VMs it is possible for the untrusted host to cause set_memory_encrypted() or set_memory_decrypted() to fail such that an error is returned and the resulting memory is shared. Callers need to take care to handle these errors to avoid returning decrypted (shared) memory to the page allocator, which could lead to functional or security issues. The VMBus device UIO driver could free decrypted/shared pages if set_memory_decrypted() fails. Check the decrypted field in the gpadl to decide whether to free the memory.

In setListening of AppOpsControllerImpl.java, there is a possible way to hide the microphone privacy indicator when restarting systemUI due to a missing check for active recordings. This could lead to local denial of service with no additional execution privileges needed. User interaction is needed for exploitation.

A Null pointer dereference problem was found in ida_free in lib/idr.c in the Linux Kernel. This issue may allow an attacker using this library to cause a denial of service problem due to a missing check at a function return.

In the Linux kernel, the following vulnerability has been resolved: clk: mediatek: clk-mt7629: Add check for mtk_alloc_clk_data Add the check for the return value of mtk_alloc_clk_data() in order to avoid NULL pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: don't fail inserts if duplicate has expired nftables selftests fail: run-tests.sh testcases/sets/0044interval_overlap_0 Expected: 0-2 . 0-3, got: W: [FAILED] ./testcases/sets/0044interval_overlap_0: got 1 Insertion must ignore duplicate but expired entries. Moreover, there is a strange asymmetry in nft_pipapo_activate: It refetches the current element, whereas the other ->activate callbacks (bitmap, hash, rhash, rbtree) use elem->priv. Same for .remove: other set implementations take elem->priv, nft_pipapo_remove fetches elem->priv, then does a relookup, remove this. I suspect this was the reason for the change that prompted the removal of the expired check in pipapo_get() in the first place, but skipping exired elements there makes no sense to me, this helper is used for normal get requests, insertions (duplicate check) and deactivate callback. In first two cases expired elements must be skipped. For ->deactivate(), this gets called for DELSETELEM, so it seems to me that expired elements should be skipped as well, i.e. delete request should fail with -ENOENT error.

In the Linux kernel, the following vulnerability has been resolved: drm: bridge: it66121: Fix invalid connector dereference Fix the NULL pointer dereference when no monitor is connected, and the sound card is opened from userspace. Instead return an empty buffer (of zeroes) as the EDID information to the sound framework if there is no connector attached.

In the Linux kernel, the following vulnerability has been resolved: mfd: qcom-spmi-pmic: Fix revid implementation The Qualcomm SPMI PMIC revid implementation is broken in multiple ways. First, it assumes that just because the sibling base device has been registered that means that it is also bound to a driver, which may not be the case (e.g. due to probe deferral or asynchronous probe). This could trigger a NULL-pointer dereference when attempting to access the driver data of the unbound device. Second, it accesses driver data of a sibling device directly and without any locking, which means that the driver data may be freed while it is being accessed (e.g. on driver unbind). Third, it leaks a struct device reference to the sibling device which is looked up using the spmi_device_from_of() every time a function (child) device is calling the revid function (e.g. on probe). Fix this mess by reimplementing the revid lookup so that it is done only at probe of the PMIC device; the base device fetches the revid info from the hardware, while any secondary SPMI device fetches the information from the base device and caches it so that it can be accessed safely from its children. If the base device has not been probed yet then probe of a secondary device is deferred.

In isPackageNullOrSystem of AppOpsService.java, there is a possible persistent denial of service due to improper input validation. This could lead to local denial of service with no additional execution privileges needed. User interaction is not needed for exploitation.

In multiple locations of AppOpsService.java, there is a possible persistent denial of service due to improper input validation. This could lead to local denial of service with no additional execution privileges needed. User interaction is not needed for exploitation.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Prevent crash when disable stream [Why] Disabling stream encoder invokes a function that no longer exists. [How] Check if the function declaration is NULL in disable stream encoder.

In onHeaderDecoded of LocalImageResolver.java, there is a possible persistent denial of service due to resource exhaustion. This could lead to local denial of service with no additional execution privileges needed. User interaction is not needed for exploitation.

In the Linux kernel, the following vulnerability has been resolved: PCI: Fix active state requirement in PME polling The commit noted in fixes added a bogus requirement that runtime PM managed devices need to be in the RPM_ACTIVE state for PME polling. In fact, only devices in low power states should be polled. However there's still a requirement that the device config space must be accessible, which has implications for both the current state of the polled device and the parent bridge, when present. It's not sufficient to assume the bridge remains in D0 and cases have been observed where the bridge passes the D0 test, but the PM state indicates RPM_SUSPENDING and config space of the polled device becomes inaccessible during pci_pme_wakeup(). Therefore, since the bridge is already effectively required to be in the RPM_ACTIVE state, formalize this in the code and elevate the PM usage count to maintain the state while polling the subordinate device. This resolves a regression reported in the bugzilla below where a Thunderbolt/USB4 hierarchy fails to scan for an attached NVMe endpoint downstream of a bridge in a D3hot power state.

In the Linux kernel, the following vulnerability has been resolved: x86/ioremap: Map EFI-reserved memory as encrypted for SEV Some drivers require memory that is marked as EFI boot services data. In order for this memory to not be re-used by the kernel after ExitBootServices(), efi_mem_reserve() is used to preserve it by inserting a new EFI memory descriptor and marking it with the EFI_MEMORY_RUNTIME attribute. Under SEV, memory marked with the EFI_MEMORY_RUNTIME attribute needs to be mapped encrypted by Linux, otherwise the kernel might crash at boot like below: EFI Variables Facility v0.08 2004-May-17 general protection fault, probably for non-canonical address 0x3597688770a868b2: 0000 [#1] SMP NOPTI CPU: 13 PID: 1 Comm: swapper/0 Not tainted 5.12.4-2-default #1 openSUSE Tumbleweed Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:efi_mokvar_entry_next [...] Call Trace: efi_mokvar_sysfs_init ? efi_mokvar_table_init do_one_initcall ? __kmalloc kernel_init_freeable ? rest_init kernel_init ret_from_fork Expand the __ioremap_check_other() function to additionally check for this other type of boot data reserved at runtime and indicate that it should be mapped encrypted for an SEV guest. [ bp: Massage commit message. ]

In the Linux kernel, the following vulnerability has been resolved: mptcp: Fix out of bounds when parsing TCP options The TCP option parser in mptcp (mptcp_get_options) could read one byte out of bounds. When the length is 1, the execution flow gets into the loop, reads one byte of the opcode, and if the opcode is neither TCPOPT_EOL nor TCPOPT_NOP, it reads one more byte, which exceeds the length of 1. This fix is inspired by commit 9609dad263f8 ("ipv4: tcp_input: fix stack out of bounds when parsing TCP options.").

In the Linux kernel, the following vulnerability has been resolved: scsi: pm80xx: Do not call scsi_remove_host() in pm8001_alloc() Calling scsi_remove_host() before scsi_add_host() results in a crash: BUG: kernel NULL pointer dereference, address: 0000000000000108 RIP: 0010:device_del+0x63/0x440 Call Trace: device_unregister+0x17/0x60 scsi_remove_host+0xee/0x2a0 pm8001_pci_probe+0x6ef/0x1b90 [pm80xx] local_pci_probe+0x3f/0x90 We cannot call scsi_remove_host() in pm8001_alloc() because scsi_add_host() has not been called yet at that point in time. Function call tree: pm8001_pci_probe() | `- pm8001_pci_alloc() | | | `- pm8001_alloc() | | | `- scsi_remove_host() | `- scsi_add_host()

In the Linux kernel, the following vulnerability has been resolved: net: ll_temac: Make sure to free skb when it is completely used With the skb pointer piggy-backed on the TX BD, we have a simple and efficient way to free the skb buffer when the frame has been transmitted. But in order to avoid freeing the skb while there are still fragments from the skb in use, we need to piggy-back on the TX BD of the skb, not the first. Without this, we are doing use-after-free on the DMA side, when the first BD of a multi TX BD packet is seen as completed in xmit_done, and the remaining BDs are still being processed.

In the Linux kernel, the following vulnerability has been resolved: drm/msm/a6xx: Allocate enough space for GMU registers In commit 142639a52a01 ("drm/msm/a6xx: fix crashstate capture for A650") we changed a6xx_get_gmu_registers() to read 3 sets of registers. Unfortunately, we didn't change the memory allocation for the array. That leads to a KASAN warning (this was on the chromeos-5.4 kernel, which has the problematic commit backported to it): BUG: KASAN: slab-out-of-bounds in _a6xx_get_gmu_registers+0x144/0x430 Write of size 8 at addr ffffff80c89432b0 by task A618-worker/209 CPU: 5 PID: 209 Comm: A618-worker Tainted: G W 5.4.156-lockdep #22 Hardware name: Google Lazor Limozeen without Touchscreen (rev5 - rev8) (DT) Call trace: dump_backtrace+0x0/0x248 show_stack+0x20/0x2c dump_stack+0x128/0x1ec print_address_description+0x88/0x4a0 __kasan_report+0xfc/0x120 kasan_report+0x10/0x18 __asan_report_store8_noabort+0x1c/0x24 _a6xx_get_gmu_registers+0x144/0x430 a6xx_gpu_state_get+0x330/0x25d4 msm_gpu_crashstate_capture+0xa0/0x84c recover_worker+0x328/0x838 kthread_worker_fn+0x32c/0x574 kthread+0x2dc/0x39c ret_from_fork+0x10/0x18 Allocated by task 209: __kasan_kmalloc+0xfc/0x1c4 kasan_kmalloc+0xc/0x14 kmem_cache_alloc_trace+0x1f0/0x2a0 a6xx_gpu_state_get+0x164/0x25d4 msm_gpu_crashstate_capture+0xa0/0x84c recover_worker+0x328/0x838 kthread_worker_fn+0x32c/0x574 kthread+0x2dc/0x39c ret_from_fork+0x10/0x18

In the Linux kernel, the following vulnerability has been resolved: ptp: ocp: Fix a resource leak in an error handling path If an error occurs after a successful 'pci_ioremap_bar()' call, it must be undone by a corresponding 'pci_iounmap()' call, as already done in the remove function.