Stack-based Buffer Overflow vulnerability in Erlang OTP erts (inet_drv) allows an unauthenticated remote attacker to crash the BEAM VM by sending a crafted SCTP ERROR chunk. The sctp_parse_error_chunk function in erts/emulator/drivers/common/inet_drv.c parses SCTP ERROR chunks and writes cause codes into a fixed-size stack-allocated ErlDrvTermData spec[] array without checking bounds. A remote attacker who has established an SCTP association to a listening port can send a single crafted SCTP ERROR chunk containing enough cause codes to overflow the stack buffer, crashing the VM. The attacker can only write 16-bit values interleaved with a fixed tag, so the overflow does not provide a controlled return address, limiting exploitation to Denial of Service. A crafted SCTP ERROR chunk may also leak bits and pieces of Erlang VM memory into the received error packet observed by the Erlang process. Such data is already readable by the user running the Erlang VM, so the disclosure scope is limited. This issue affects OTP from OTP 17.0 before 27.3.4.13, 28.5.0.2 and 29.0.2, corresponding to erts from 6.0 before 15.2.7.9, 16.4.0.2 and 17.0.2.

In face detect driver, there is a possible out of bounds write due to a missing bounds check. This could lead to local denial of service in kernel.

In sprd_sysdump driver, there is a possible out of bounds write due to a missing bounds check. This could lead to local denial of service in kernel.

A vulnerability, which was classified as problematic, has been found in code-projects Police FIR Record Management System 1.0. This issue affects some unknown processing of the component Add Record Handler. The manipulation leads to stack-based buffer overflow. Local access is required to approach this attack. The exploit has been disclosed to the public and may be used.

In face detect driver, there is a possible out of bounds write due to a missing bounds check. This could lead to local denial of service in kernel.

A vulnerability was found in Microword eScan Antivirus 7.0.32 on Linux. It has been rated as problematic. Affected by this issue is the function removeExtraSlashes of the file /opt/MicroWorld/sbin/rtscanner of the component Folder Watch List Handler. The manipulation leads to stack-based buffer overflow. The attack needs to be approached locally. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A “CWE-121: Stack-based Buffer Overflow” in the wd210std.dll dynamic library packaged with the ThermoscanIP installer allows a local attacker to possibly trigger a Denial-of-Service (DoS) condition on the target component.

SonicWall Capture Client version 3.7.10, NetExtender client version 10.2.337 and earlier versions are installed with sfpmonitor.sys driver. The driver has been found to be vulnerable to Denial-of-Service (DoS) caused by Stack-based Buffer Overflow vulnerability.

NVClient 5.0 contains a stack buffer overflow vulnerability in the user configuration contact field that allows attackers to crash the application. Attackers can overwrite 846 bytes of memory by pasting a crafted payload into the contact box, causing a denial of service condition.

jq is a command-line JSON processor. Version 1.7 is vulnerable to stack-based buffer overflow in builds using decNumber. Version 1.7.1 contains a patch for this issue.

A Stack-based Buffer Overflow vulnerability in the CLI command of Juniper Networks Junos and Junos EVO allows a low privileged attacker to execute a specific CLI commands leading to Denial of Service. Repeated actions by the attacker will create a sustained Denial of Service (DoS) condition. This issue affects Juniper Networks: Junos OS: * All versions prior to 19.1R3-S10; * 19.2 versions prior to 19.2R3-S7; * 19.3 versions prior to 19.3R3-S8; * 19.4 versions prior to 19.4R3-S12; * 20.2 versions prior to 20.2R3-S8; * 20.4 versions prior to 20.4R3-S8; * 21.2 versions prior to 21.2R3-S6; * 21.3 versions prior to 21.3R3-S5; * 21.4 versions prior to 21.4R3-S4; * 22.1 versions prior to 22.1R3-S3; * 22.2 versions prior to 22.2R3-S1; * 22.3 versions prior to 22.3R3; * 22.4 versions prior to 22.4R2. Junos OS Evolved: * All versions prior to 20.4R3-S8-EVO; * 21.2 versions prior to 21.2R3-S6-EVO; * 21.3 versions prior to 21.3R3-S5-EVO; * 21.4 versions prior to 21.4R3-S4-EVO; * 22.1 versions prior to 22.1R3-S3-EVO; * 22.2 versions prior to 22.2R3-S1-EVO; * 22.3 versions prior to 22.3R3-EVO; * 22.4 versions prior to 22.4R2-EVO.

Several versions of ALEOS, including ALEOS 4.16.0, include an opensource third-party component which can be exploited from the local area network, resulting in a Denial of Service condition for the captive portal.

A vulnerability was found in the Linux kernel's nft_set_desc_concat_parse() function .This flaw allows an attacker to trigger a buffer overflow via nft_set_desc_concat_parse() , causing a denial of service and possibly to run code.

A vulnerability was reported in the Open vSwitch sub-component in the Linux Kernel. The flaw occurs when a recursive operation of code push recursively calls into the code block. The OVS module does not validate the stack depth, pushing too many frames and causing a stack overflow. As a result, this can lead to a crash or other related issues.

CVE-2026-33452 is a buffer overflow vulnerability in the Secure Access Windows client prior to 14.50. Attackers with local control of the Windows client can use it to ‘blue screen’ the system.

A vulnerability has been found in wren-lang wren up to 0.4.0. This impacts the function printError of the file src/vm/wren_compiler.c of the component Error Message Handler. Such manipulation leads to stack-based buffer overflow. An attack has to be approached locally. The exploit has been disclosed to the public and may be used. The project was informed of the problem early through an issue report but has not responded yet.

A Stack-based Buffer Overflow vulnerability in the CLI command of Juniper Networks Junos OS allows a low privileged attacker to execute a specific CLI commands leading to Denial of Service. Repeated actions by the attacker will create a sustained Denial of Service (DoS) condition. This issue affects Juniper Networks: Junos OS * All versions prior to 19.1R3-S10; * 19.2 versions prior to 19.2R3-S7; * 19.3 versions prior to 19.3R3-S8; * 19.4 versions prior to 19.4R3-S12; * 20.2 versions prior to 20.2R3-S8; * 20.4 versions prior to 20.4R3-S8; * 21.2 versions prior to 21.2R3-S6; * 21.3 versions prior to 21.3R3-S5; * 21.4 versions prior to 21.4R3-S5; * 22.1 versions prior to 22.1R3-S3; * 22.2 versions prior to 22.2R3-S2; * 22.3 versions prior to 22.3R3-S1; * 22.4 versions prior to 22.4R2-S1; * 23.2 versions prior to 23.2R2.

zsh through version 5.4.2 is vulnerable to a stack-based buffer overflow in the exec.c:hashcmd() function. A local attacker could exploit this to cause a denial of service.

The egg-mkfont utility in Panda3D versions up to and including 1.10.16 contains a stack-based buffer overflow vulnerability due to use of an unbounded sprintf() call with attacker-controlled input. When constructing glyph filenames, egg-mkfont formats a user-supplied glyph pattern (-gp) into a fixed-size stack buffer without length validation. Supplying an excessively long glyph pattern string can overflow the stack buffer, resulting in memory corruption and a deterministic crash. Depending on build configuration and execution environment, the overflow may also be exploitable for arbitrary code execution.

A Stack-based Buffer Overflow vulnerability in the CLI command of Juniper Networks Junos OS allows a low privileged attacker to execute a specific CLI commands leading to Denial of Service. Repeated actions by the attacker will create a sustained Denial of Service (DoS) condition. This issue affects Juniper Networks: Junos OS: * All versions prior to 20.4R3-S8; * 21.2 versions prior to 21.2R3-S6; * 21.3 versions prior to 21.3R3-S5; * 22.1 versions prior to 22.1R3-S3; * 22.3 versions prior to 22.3R3; * 22.4 versions prior to 22.4R3.

In sensor driver, there is a possible out of bounds write due to a missing bounds check. This could lead to local denial of service in kernel.

Artifex Ghostscript through 10.05.1 has a stack-based buffer overflow in pdfmark_coerce_dest in devices/vector/gdevpdfm.c via a large size value.

Artifex Ghostscript through 10.05.1 has a stack-based buffer overflow in pdf_write_cmap in devices/vector/gdevpdtw.c.

rofl0r/proxychains-ng versions up to and including 4.17 and prior to commit cc005b7 contain a stack-based buffer overflow vulnerability in the function proxy_from_string() located in src/libproxychains.c. When parsing crafted proxy configuration entries containing overly long username or password fields, the application may write beyond the bounds of fixed-size stack buffers, leading to memory corruption or crashes. This vulnerability may allow denial of service and, under certain conditions, could be leveraged for further exploitation depending on the execution environment and applied mitigations.

A vulnerability was found in code-projects Train Ticket Reservation System 1.0. It has been declared as critical. Affected by this vulnerability is the function Reservation of the component Ticket Reservation. The manipulation of the argument Name leads to stack-based buffer overflow. Attacking locally is a requirement. The exploit has been disclosed to the public and may be used.

merbanan/rtl_433 versions up to and including 25.02 and prior to commit 25e47f8 contain a stack-based buffer overflow vulnerability in the function parse_rfraw() located in src/rfraw.c. When processing crafted or excessively large raw RF input data, the application may write beyond the bounds of a stack buffer, resulting in memory corruption or a crash. This vulnerability can be exploited to cause a denial of service and, under certain conditions, may be leveraged for further exploitation depending on the execution environment and available mitigations.

A vulnerability, which was classified as critical, was found in Open Asset Import Library Assimp 5.4.3. Affected is the function Assimp::MD2Importer::InternReadFile in the library code/AssetLib/MD2/MD2Loader.cpp of the component Malformed File Handler. The manipulation of the argument Name leads to stack-based buffer overflow. The attack needs to be approached locally. The exploit has been disclosed to the public and may be used. It is recommended to upgrade the affected component.

In wlan driver, there is a possible missing params check. This could lead to local denial of service in wlan services.

Dnsmasq-utils 2.79-1 contains a buffer overflow vulnerability in the dhcp_release utility that allows attackers to cause a denial of service by supplying excessive input. Attackers can trigger a core dump and terminate the dhcp_release process by sending a crafted input string longer than 16 characters.

UltraVNC Launcher 1.2.4.0 contains a denial of service vulnerability in its password configuration properties that allows local attackers to crash the application. Attackers can paste an overly long 300-character string into the password field to trigger an application crash and prevent normal launcher functionality.

A security vulnerability has been detected in DCMTK up to 3.6.5. The affected element is the function parseQuota of the component dcmqrscp. The manipulation of the argument StorageQuota leads to stack-based buffer overflow. Local access is required to approach this attack. The exploit has been disclosed publicly and may be used. Upgrading to version 3.6.6 is sufficient to fix this issue. The identifier of the patch is 0fef9f02e. It is recommended to upgrade the affected component.

Product Key Explorer 4.2.0.0 contains a denial of service vulnerability that allows local attackers to crash the application by overflowing the registration name input field. Attackers can create a specially crafted text file with repeated characters to trigger a buffer overflow when pasted into the registration name field, causing the application to crash.