In the Linux kernel, the following vulnerability has been resolved: scsi: ses: Fix possible desc_ptr out-of-bounds accesses Sanitize possible desc_ptr out-of-bounds accesses in ses_enclosure_data_process().

In the Linux kernel, the following vulnerability has been resolved: i3c: mipi-i3c-hci: Fix out of bounds access in hci_dma_irq_handler Do not loop over ring headers in hci_dma_irq_handler() that are not allocated and enabled in hci_dma_init(). Otherwise out of bounds access will occur from rings->headers[i] access when i >= number of allocated ring headers.

In the Linux kernel, the following vulnerability has been resolved: ntb_hw_switchtec: Fix shift-out-of-bounds in switchtec_ntb_mw_set_trans There is a kernel API ntb_mw_clear_trans() would pass 0 to both addr and size. This would make xlate_pos negative. [ 23.734156] switchtec switchtec0: MW 0: part 0 addr 0x0000000000000000 size 0x0000000000000000 [ 23.734158] ================================================================================ [ 23.734172] UBSAN: shift-out-of-bounds in drivers/ntb/hw/mscc/ntb_hw_switchtec.c:293:7 [ 23.734418] shift exponent -1 is negative Ensuring xlate_pos is a positive or zero before BIT.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: HCI: Fix global-out-of-bounds To loop a variable-length array, hci_init_stage_sync(stage) considers that stage[i] is valid as long as stage[i-1].func is valid. Thus, the last element of stage[].func should be intentionally invalid as hci_init0[], le_init2[], and others did. However, amp_init1[] and amp_init2[] have no invalid element, letting hci_init_stage_sync() keep accessing amp_init1[] over its valid range. This patch fixes this by adding {} in the last of amp_init1[] and amp_init2[]. ================================================================== BUG: KASAN: global-out-of-bounds in hci_dev_open_sync ( /v6.2-bzimage/net/bluetooth/hci_sync.c:3154 /v6.2-bzimage/net/bluetooth/hci_sync.c:3343 /v6.2-bzimage/net/bluetooth/hci_sync.c:4418 /v6.2-bzimage/net/bluetooth/hci_sync.c:4609 /v6.2-bzimage/net/bluetooth/hci_sync.c:4689) Read of size 8 at addr ffffffffaed1ab70 by task kworker/u5:0/1032 CPU: 0 PID: 1032 Comm: kworker/u5:0 Not tainted 6.2.0 #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04 Workqueue: hci1 hci_power_on Call Trace: <TASK> dump_stack_lvl (/v6.2-bzimage/lib/dump_stack.c:107 (discriminator 1)) print_report (/v6.2-bzimage/mm/kasan/report.c:307 /v6.2-bzimage/mm/kasan/report.c:417) ? hci_dev_open_sync (/v6.2-bzimage/net/bluetooth/hci_sync.c:3154 /v6.2-bzimage/net/bluetooth/hci_sync.c:3343 /v6.2-bzimage/net/bluetooth/hci_sync.c:4418 /v6.2-bzimage/net/bluetooth/hci_sync.c:4609 /v6.2-bzimage/net/bluetooth/hci_sync.c:4689) kasan_report (/v6.2-bzimage/mm/kasan/report.c:184 /v6.2-bzimage/mm/kasan/report.c:519) ? hci_dev_open_sync (/v6.2-bzimage/net/bluetooth/hci_sync.c:3154 /v6.2-bzimage/net/bluetooth/hci_sync.c:3343 /v6.2-bzimage/net/bluetooth/hci_sync.c:4418 /v6.2-bzimage/net/bluetooth/hci_sync.c:4609 /v6.2-bzimage/net/bluetooth/hci_sync.c:4689) hci_dev_open_sync (/v6.2-bzimage/net/bluetooth/hci_sync.c:3154 /v6.2-bzimage/net/bluetooth/hci_sync.c:3343 /v6.2-bzimage/net/bluetooth/hci_sync.c:4418 /v6.2-bzimage/net/bluetooth/hci_sync.c:4609 /v6.2-bzimage/net/bluetooth/hci_sync.c:4689) ? __pfx_hci_dev_open_sync (/v6.2-bzimage/net/bluetooth/hci_sync.c:4635) ? mutex_lock (/v6.2-bzimage/./arch/x86/include/asm/atomic64_64.h:190 /v6.2-bzimage/./include/linux/atomic/atomic-long.h:443 /v6.2-bzimage/./include/linux/atomic/atomic-instrumented.h:1781 /v6.2-bzimage/kernel/locking/mutex.c:171 /v6.2-bzimage/kernel/locking/mutex.c:285) ? __pfx_mutex_lock (/v6.2-bzimage/kernel/locking/mutex.c:282) hci_power_on (/v6.2-bzimage/net/bluetooth/hci_core.c:485 /v6.2-bzimage/net/bluetooth/hci_core.c:984) ? __pfx_hci_power_on (/v6.2-bzimage/net/bluetooth/hci_core.c:969) ? read_word_at_a_time (/v6.2-bzimage/./include/asm-generic/rwonce.h:85) ? strscpy (/v6.2-bzimage/./arch/x86/include/asm/word-at-a-time.h:62 /v6.2-bzimage/lib/string.c:161) process_one_work (/v6.2-bzimage/kernel/workqueue.c:2294) worker_thread (/v6.2-bzimage/./include/linux/list.h:292 /v6.2-bzimage/kernel/workqueue.c:2437) ? __pfx_worker_thread (/v6.2-bzimage/kernel/workqueue.c:2379) kthread (/v6.2-bzimage/kernel/kthread.c:376) ? __pfx_kthread (/v6.2-bzimage/kernel/kthread.c:331) ret_from_fork (/v6.2-bzimage/arch/x86/entry/entry_64.S:314) </TASK> The buggy address belongs to the variable: amp_init1+0x30/0x60 The buggy address belongs to the physical page: page:000000003a157ec6 refcount:1 mapcount:0 mapping:0000000000000000 ia flags: 0x200000000001000(reserved|node=0|zone=2) raw: 0200000000001000 ffffea0005054688 ffffea0005054688 000000000000000 raw: 0000000000000000 0000000000000000 00000001ffffffff 000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffffffffaed1aa00: f9 f9 f9 f9 00 00 00 00 f9 f9 f9 f9 00 00 00 00 ffffffffaed1aa80: 00 00 00 00 f9 f9 f9 f9 00 00 00 00 00 00 00 00 >ffffffffaed1ab00: 00 f9 f9 f9 f9 f9 f9 f9 00 00 00 00 00 00 f9 f9 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: platform/chrome: cros_ec_chardev: fix kernel data leak from ioctl It is possible to peep kernel page's data by providing larger `insize` in struct cros_ec_command[1] when invoking EC host commands. Fix it by using zeroed memory. [1]: https://elixir.bootlin.com/linux/v6.2/source/include/linux/platform_data/cros_ec_proto.h#L74

In the Linux kernel, the following vulnerability has been resolved: drm/edid: fix info leak when failing to get panel id Make sure to clear the transfer buffer before fetching the EDID to avoid leaking slab data to the logs on errors that leave the buffer unchanged.

In the Linux kernel, the following vulnerability has been resolved: fs: prevent out-of-bounds array speculation when closing a file descriptor Google-Bug-Id: 114199369

In the Linux kernel, the following vulnerability has been resolved: af_unix: fix struct pid leaks in OOB support syzbot reported struct pid leak [1]. Issue is that queue_oob() calls maybe_add_creds() which potentially holds a reference on a pid. But skb->destructor is not set (either directly or by calling unix_scm_to_skb()) This means that subsequent kfree_skb() or consume_skb() would leak this reference. In this fix, I chose to fully support scm even for the OOB message. [1] BUG: memory leak unreferenced object 0xffff8881053e7f80 (size 128): comm "syz-executor242", pid 5066, jiffies 4294946079 (age 13.220s) hex dump (first 32 bytes): 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff812ae26a>] alloc_pid+0x6a/0x560 kernel/pid.c:180 [<ffffffff812718df>] copy_process+0x169f/0x26c0 kernel/fork.c:2285 [<ffffffff81272b37>] kernel_clone+0xf7/0x610 kernel/fork.c:2684 [<ffffffff812730cc>] __do_sys_clone+0x7c/0xb0 kernel/fork.c:2825 [<ffffffff849ad699>] do_syscall_x64 arch/x86/entry/common.c:50 [inline] [<ffffffff849ad699>] do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80 [<ffffffff84a0008b>] entry_SYSCALL_64_after_hwframe+0x63/0xcd

In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: slab-out-of-bounds read in brcmf_get_assoc_ies() Fix a slab-out-of-bounds read that occurs in kmemdup() called from brcmf_get_assoc_ies(). The bug could occur when assoc_info->req_len, data from a URB provided by a USB device, is bigger than the size of buffer which is defined as WL_EXTRA_BUF_MAX. Add the size check for req_len/resp_len of assoc_info. Found by a modified version of syzkaller. [ 46.592467][ T7] ================================================================== [ 46.594687][ T7] BUG: KASAN: slab-out-of-bounds in kmemdup+0x3e/0x50 [ 46.596572][ T7] Read of size 3014656 at addr ffff888019442000 by task kworker/0:1/7 [ 46.598575][ T7] [ 46.599157][ T7] CPU: 0 PID: 7 Comm: kworker/0:1 Tainted: G O 5.14.0+ #145 [ 46.601333][ T7] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 [ 46.604360][ T7] Workqueue: events brcmf_fweh_event_worker [ 46.605943][ T7] Call Trace: [ 46.606584][ T7] dump_stack_lvl+0x8e/0xd1 [ 46.607446][ T7] print_address_description.constprop.0.cold+0x93/0x334 [ 46.608610][ T7] ? kmemdup+0x3e/0x50 [ 46.609341][ T7] kasan_report.cold+0x79/0xd5 [ 46.610151][ T7] ? kmemdup+0x3e/0x50 [ 46.610796][ T7] kasan_check_range+0x14e/0x1b0 [ 46.611691][ T7] memcpy+0x20/0x60 [ 46.612323][ T7] kmemdup+0x3e/0x50 [ 46.612987][ T7] brcmf_get_assoc_ies+0x967/0xf60 [ 46.613904][ T7] ? brcmf_notify_vif_event+0x3d0/0x3d0 [ 46.614831][ T7] ? lock_chain_count+0x20/0x20 [ 46.615683][ T7] ? mark_lock.part.0+0xfc/0x2770 [ 46.616552][ T7] ? lock_chain_count+0x20/0x20 [ 46.617409][ T7] ? mark_lock.part.0+0xfc/0x2770 [ 46.618244][ T7] ? lock_chain_count+0x20/0x20 [ 46.619024][ T7] brcmf_bss_connect_done.constprop.0+0x241/0x2e0 [ 46.620019][ T7] ? brcmf_parse_configure_security.isra.0+0x2a0/0x2a0 [ 46.620818][ T7] ? __lock_acquire+0x181f/0x5790 [ 46.621462][ T7] brcmf_notify_connect_status+0x448/0x1950 [ 46.622134][ T7] ? rcu_read_lock_bh_held+0xb0/0xb0 [ 46.622736][ T7] ? brcmf_cfg80211_join_ibss+0x7b0/0x7b0 [ 46.623390][ T7] ? find_held_lock+0x2d/0x110 [ 46.623962][ T7] ? brcmf_fweh_event_worker+0x19f/0xc60 [ 46.624603][ T7] ? mark_held_locks+0x9f/0xe0 [ 46.625145][ T7] ? lockdep_hardirqs_on_prepare+0x3e0/0x3e0 [ 46.625871][ T7] ? brcmf_cfg80211_join_ibss+0x7b0/0x7b0 [ 46.626545][ T7] brcmf_fweh_call_event_handler.isra.0+0x90/0x100 [ 46.627338][ T7] brcmf_fweh_event_worker+0x557/0xc60 [ 46.627962][ T7] ? brcmf_fweh_call_event_handler.isra.0+0x100/0x100 [ 46.628736][ T7] ? rcu_read_lock_sched_held+0xa1/0xd0 [ 46.629396][ T7] ? rcu_read_lock_bh_held+0xb0/0xb0 [ 46.629970][ T7] ? lockdep_hardirqs_on_prepare+0x273/0x3e0 [ 46.630649][ T7] process_one_work+0x92b/0x1460 [ 46.631205][ T7] ? pwq_dec_nr_in_flight+0x330/0x330 [ 46.631821][ T7] ? rwlock_bug.part.0+0x90/0x90 [ 46.632347][ T7] worker_thread+0x95/0xe00 [ 46.632832][ T7] ? __kthread_parkme+0x115/0x1e0 [ 46.633393][ T7] ? process_one_work+0x1460/0x1460 [ 46.633957][ T7] kthread+0x3a1/0x480 [ 46.634369][ T7] ? set_kthread_struct+0x120/0x120 [ 46.634933][ T7] ret_from_fork+0x1f/0x30 [ 46.635431][ T7] [ 46.635687][ T7] Allocated by task 7: [ 46.636151][ T7] kasan_save_stack+0x1b/0x40 [ 46.636628][ T7] __kasan_kmalloc+0x7c/0x90 [ 46.637108][ T7] kmem_cache_alloc_trace+0x19e/0x330 [ 46.637696][ T7] brcmf_cfg80211_attach+0x4a0/0x4040 [ 46.638275][ T7] brcmf_attach+0x389/0xd40 [ 46.638739][ T7] brcmf_usb_probe+0x12de/0x1690 [ 46.639279][ T7] usb_probe_interface+0x2aa/0x760 [ 46.639820][ T7] really_probe+0x205/0xb70 [ 46.640342][ T7] __driver_probe_device+0 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: jfs: jfs_dmap: Validate db_l2nbperpage while mounting In jfs_dmap.c at line 381, BLKTODMAP is used to get a logical block number inside dbFree(). db_l2nbperpage, which is the log2 number of blocks per page, is passed as an argument to BLKTODMAP which uses it for shifting. Syzbot reported a shift out-of-bounds crash because db_l2nbperpage is too big. This happens because the large value is set without any validation in dbMount() at line 181. Thus, make sure that db_l2nbperpage is correct while mounting. Max number of blocks per page = Page size / Min block size => log2(Max num_block per page) = log2(Page size / Min block size) = log2(Page size) - log2(Min block size) => Max db_l2nbperpage = L2PSIZE - L2MINBLOCKSIZE

In the Linux kernel, the following vulnerability has been resolved: cacheinfo: Fix shared_cpu_map to handle shared caches at different levels The cacheinfo sets up the shared_cpu_map by checking whether the caches with the same index are shared between CPUs. However, this will trigger slab-out-of-bounds access if the CPUs do not have the same cache hierarchy. Another problem is the mismatched shared_cpu_map when the shared cache does not have the same index between CPUs. CPU0 I D L3 index 0 1 2 x ^ ^ ^ ^ index 0 1 2 3 CPU1 I D L2 L3 This patch checks each cache is shared with all caches on other CPUs.

In the Linux kernel, the following vulnerability has been resolved: VMCI: check context->notify_page after call to get_user_pages_fast() to avoid GPF The call to get_user_pages_fast() in vmci_host_setup_notify() can return NULL context->notify_page causing a GPF. To avoid GPF check if context->notify_page == NULL and return error if so. general protection fault, probably for non-canonical address 0xe0009d1000000060: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: maybe wild-memory-access in range [0x0005088000000300- 0x0005088000000307] CPU: 2 PID: 26180 Comm: repro_34802241 Not tainted 6.1.0-rc4 #1 Hardware name: Red Hat KVM, BIOS 1.15.0-2.module+el8.6.0 04/01/2014 RIP: 0010:vmci_ctx_check_signal_notify+0x91/0xe0 Call Trace: <TASK> vmci_host_unlocked_ioctl+0x362/0x1f40 __x64_sys_ioctl+0x1a1/0x230 do_syscall_64+0x3a/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix kernel crash due to null io->bio We should return when io->bio is null before doing anything. Otherwise, panic. BUG: kernel NULL pointer dereference, address: 0000000000000010 RIP: 0010:__submit_merged_write_cond+0x164/0x240 [f2fs] Call Trace: <TASK> f2fs_submit_merged_write+0x1d/0x30 [f2fs] commit_checkpoint+0x110/0x1e0 [f2fs] f2fs_write_checkpoint+0x9f7/0xf00 [f2fs] ? __pfx_issue_checkpoint_thread+0x10/0x10 [f2fs] __checkpoint_and_complete_reqs+0x84/0x190 [f2fs] ? preempt_count_add+0x82/0xc0 ? __pfx_issue_checkpoint_thread+0x10/0x10 [f2fs] issue_checkpoint_thread+0x4c/0xf0 [f2fs] ? __pfx_autoremove_wake_function+0x10/0x10 kthread+0xff/0x130 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2c/0x50 </TASK>

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211_hwsim: drop short frames While technically some control frames like ACK are shorter and end after Address 1, such frames shouldn't be forwarded through wmediumd or similar userspace, so require the full 3-address header to avoid accessing invalid memory if shorter frames are passed in.

In the Linux kernel, the following vulnerability has been resolved: scsi: mpi3mr: Use number of bits to manage bitmap sizes To allocate bitmaps, the mpi3mr driver calculates sizes of bitmaps using byte as unit. However, bitmap helper functions assume that bitmaps are allocated using unsigned long as unit. This gap causes memory access beyond the bitmap sizes and results in "BUG: KASAN: slab-out-of-bounds". The BUG was observed at firmware download to eHBA-9600. Call trace indicated that the out-of-bounds access happened in find_first_zero_bit() called from mpi3mr_send_event_ack() for miroc->evtack_cmds_bitmap. To fix the BUG, do not use bytes to manage bitmap sizes. Instead, use number of bits, and call bitmap helper functions which take number of bits as arguments. For memory allocation, call bitmap_zalloc() instead of kzalloc() and krealloc(). For memory free, call bitmap_free() instead of kfree(). For zero clear, call bitmap_clear() instead of memset(). Remove three fields for bitmap byte sizes in struct scmd_priv which are no longer required. Replace the field dev_handle_bitmap_sz with dev_handle_bitmap_bits to keep number of bits of removepend_bitmap across resize.

In the Linux kernel, the following vulnerability has been resolved: HID: intel-ish-hid: Fix kernel panic during warm reset During warm reset device->fw_client is set to NULL. If a bus driver is registered after this NULL setting and before new firmware clients are enumerated by ISHTP, kernel panic will result in the function ishtp_cl_bus_match(). This is because of reference to device->fw_client->props.protocol_name. ISH firmware after getting successfully loaded, sends a warm reset notification to remove all clients from the bus and sets device->fw_client to NULL. Until kernel v5.15, all enabled ISHTP kernel module drivers were loaded right after any of the first ISHTP device was registered, regardless of whether it was a matched or an unmatched device. This resulted in all drivers getting registered much before the warm reset notification from ISH. Starting kernel v5.16, this issue got exposed after the change was introduced to load only bus drivers for the respective matching devices. In this scenario, cros_ec_ishtp device and cros_ec_ishtp driver are registered after the warm reset device fw_client NULL setting. cros_ec_ishtp driver_register() triggers the callback to ishtp_cl_bus_match() to match ISHTP driver to the device and causes kernel panic in guid_equal() when dereferencing fw_client NULL pointer to get protocol_name.

In the Linux kernel, the following vulnerability has been resolved: ntfs: Fix panic about slab-out-of-bounds caused by ntfs_listxattr() Here is a BUG report from syzbot: BUG: KASAN: slab-out-of-bounds in ntfs_list_ea fs/ntfs3/xattr.c:191 [inline] BUG: KASAN: slab-out-of-bounds in ntfs_listxattr+0x401/0x570 fs/ntfs3/xattr.c:710 Read of size 1 at addr ffff888021acaf3d by task syz-executor128/3632 Call Trace: ntfs_list_ea fs/ntfs3/xattr.c:191 [inline] ntfs_listxattr+0x401/0x570 fs/ntfs3/xattr.c:710 vfs_listxattr fs/xattr.c:457 [inline] listxattr+0x293/0x2d0 fs/xattr.c:804 Fix the logic of ea_all iteration. When the ea->name_len is 0, return immediately, or Add2Ptr() would visit invalid memory in the next loop. [almaz.alexandrovich@paragon-software.com: lines of the patch have changed]

In the Linux kernel, the following vulnerability has been resolved: soundwire: qcom: fix storing port config out-of-bounds The 'qcom_swrm_ctrl->pconfig' has size of QCOM_SDW_MAX_PORTS (14), however we index it starting from 1, not 0, to match real port numbers. This can lead to writing port config past 'pconfig' bounds and overwriting next member of 'qcom_swrm_ctrl' struct. Reported also by smatch: drivers/soundwire/qcom.c:1269 qcom_swrm_get_port_config() error: buffer overflow 'ctrl->pconfig' 14 <= 14

In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Fix oob in ntfs_listxattr The length of name cannot exceed the space occupied by ea.

In the Linux kernel, the following vulnerability has been resolved: s390/ptrace: handle setting of fpc register correctly If the content of the floating point control (fpc) register of a traced process is modified with the ptrace interface the new value is tested for validity by temporarily loading it into the fpc register. This may lead to corruption of the fpc register of the tracing process: if an interrupt happens while the value is temporarily loaded into the fpc register, and within interrupt context floating point or vector registers are used, the current fp/vx registers are saved with save_fpu_regs() assuming they belong to user space and will be loaded into fp/vx registers when returning to user space. test_fp_ctl() restores the original user space fpc register value, however it will be discarded, when returning to user space. In result the tracer will incorrectly continue to run with the value that was supposed to be used for the traced process. Fix this by saving fpu register contents with save_fpu_regs() before using test_fp_ctl().

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix operation precedence bug in port timestamping napi_poll context Indirection (*) is of lower precedence than postfix increment (++). Logic in napi_poll context would cause an out-of-bound read by first increment the pointer address by byte address space and then dereference the value. Rather, the intended logic was to dereference first and then increment the underlying value.

In the Linux kernel, the following vulnerability has been resolved: x86/alternatives: Disable KASAN in apply_alternatives() Fei has reported that KASAN triggers during apply_alternatives() on a 5-level paging machine: BUG: KASAN: out-of-bounds in rcu_is_watching() Read of size 4 at addr ff110003ee6419a0 by task swapper/0/0 ... __asan_load4() rcu_is_watching() trace_hardirqs_on() text_poke_early() apply_alternatives() ... On machines with 5-level paging, cpu_feature_enabled(X86_FEATURE_LA57) gets patched. It includes KASAN code, where KASAN_SHADOW_START depends on __VIRTUAL_MASK_SHIFT, which is defined with cpu_feature_enabled(). KASAN gets confused when apply_alternatives() patches the KASAN_SHADOW_START users. A test patch that makes KASAN_SHADOW_START static, by replacing __VIRTUAL_MASK_SHIFT with 56, works around the issue. Fix it for real by disabling KASAN while the kernel is patching alternatives. [ mingo: updated the changelog ]

In the Linux kernel, the following vulnerability has been resolved: media: uvcvideo: Fix OOB read If the index provided by the user is bigger than the mask size, we might do an out of bound read.

In the Linux kernel, the following vulnerability has been resolved: HID: intel-ish-hid: ipc: Disable and reenable ACPI GPE bit The EHL (Elkhart Lake) based platforms provide a OOB (Out of band) service, which allows to wakup device when the system is in S5 (Soft-Off state). This OOB service can be enabled/disabled from BIOS settings. When enabled, the ISH device gets PME wake capability. To enable PME wakeup, driver also needs to enable ACPI GPE bit. On resume, BIOS will clear the wakeup bit. So driver need to re-enable it in resume function to keep the next wakeup capability. But this BIOS clearing of wakeup bit doesn't decrement internal OS GPE reference count, so this reenabling on every resume will cause reference count to overflow. So first disable and reenable ACPI GPE bit using acpi_disable_gpe().

In the Linux kernel, the following vulnerability has been resolved: nfc: nci: assert requested protocol is valid The protocol is used in a bit mask to determine if the protocol is supported. Assert the provided protocol is less than the maximum defined so it doesn't potentially perform a shift-out-of-bounds and provide a clearer error for undefined protocols vs unsupported ones.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix uaf in smb20_oplock_break_ack drop reference after use opinfo.

In the Linux kernel, the following vulnerability has been resolved: media: imx-jpeg: fix a bug of accessing array out of bounds When error occurs in parsing jpeg, the slot isn't acquired yet, it may be the default value MXC_MAX_SLOTS. If the driver access the slot using the incorrect slot number, it will access array out of bounds. The result is the driver will change num_domains, which follows slot_data in struct mxc_jpeg_dev. Then the driver won't detach the pm domain at rmmod, which will lead to kernel panic when trying to insmod again.

In the Linux kernel, the following vulnerability has been resolved: net: fix information leakage in /proc/net/ptype In one net namespace, after creating a packet socket without binding it to a device, users in other net namespaces can observe the new `packet_type` added by this packet socket by reading `/proc/net/ptype` file. This is minor information leakage as packet socket is namespace aware. Add a net pointer in `packet_type` to keep the net namespace of of corresponding packet socket. In `ptype_seq_show`, this net pointer must be checked when it is not NULL.

In the Linux kernel, the following vulnerability has been resolved: tracing: Limit access to parser->buffer when trace_get_user failed When the length of the string written to set_ftrace_filter exceeds FTRACE_BUFF_MAX, the following KASAN alarm will be triggered: BUG: KASAN: slab-out-of-bounds in strsep+0x18c/0x1b0 Read of size 1 at addr ffff0000d00bd5ba by task ash/165 CPU: 1 UID: 0 PID: 165 Comm: ash Not tainted 6.16.0-g6bcdbd62bd56-dirty Hardware name: linux,dummy-virt (DT) Call trace: show_stack+0x34/0x50 (C) dump_stack_lvl+0xa0/0x158 print_address_description.constprop.0+0x88/0x398 print_report+0xb0/0x280 kasan_report+0xa4/0xf0 __asan_report_load1_noabort+0x20/0x30 strsep+0x18c/0x1b0 ftrace_process_regex.isra.0+0x100/0x2d8 ftrace_regex_release+0x484/0x618 __fput+0x364/0xa58 ____fput+0x28/0x40 task_work_run+0x154/0x278 do_notify_resume+0x1f0/0x220 el0_svc+0xec/0xf0 el0t_64_sync_handler+0xa0/0xe8 el0t_64_sync+0x1ac/0x1b0 The reason is that trace_get_user will fail when processing a string longer than FTRACE_BUFF_MAX, but not set the end of parser->buffer to 0. Then an OOB access will be triggered in ftrace_regex_release-> ftrace_process_regex->strsep->strpbrk. We can solve this problem by limiting access to parser->buffer when trace_get_user failed.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix out of bounds read in smb2_sess_setup ksmbd does not consider the case of that smb2 session setup is in compound request. If this is the second payload of the compound, OOB read issue occurs while processing the first payload in the smb2_sess_setup().

In the Linux kernel, the following vulnerability has been resolved: net: qualcomm: rmnet: fix global oob in rmnet_policy The variable rmnet_link_ops assign a *bigger* maxtype which leads to a global out-of-bounds read when parsing the netlink attributes. See bug trace below: ================================================================== BUG: KASAN: global-out-of-bounds in validate_nla lib/nlattr.c:386 [inline] BUG: KASAN: global-out-of-bounds in __nla_validate_parse+0x24af/0x2750 lib/nlattr.c:600 Read of size 1 at addr ffffffff92c438d0 by task syz-executor.6/84207 CPU: 0 PID: 84207 Comm: syz-executor.6 Tainted: G N 6.1.0 #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x8b/0xb3 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:284 [inline] print_report+0x172/0x475 mm/kasan/report.c:395 kasan_report+0xbb/0x1c0 mm/kasan/report.c:495 validate_nla lib/nlattr.c:386 [inline] __nla_validate_parse+0x24af/0x2750 lib/nlattr.c:600 __nla_parse+0x3e/0x50 lib/nlattr.c:697 nla_parse_nested_deprecated include/net/netlink.h:1248 [inline] __rtnl_newlink+0x50a/0x1880 net/core/rtnetlink.c:3485 rtnl_newlink+0x64/0xa0 net/core/rtnetlink.c:3594 rtnetlink_rcv_msg+0x43c/0xd70 net/core/rtnetlink.c:6091 netlink_rcv_skb+0x14f/0x410 net/netlink/af_netlink.c:2540 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0x54e/0x800 net/netlink/af_netlink.c:1345 netlink_sendmsg+0x930/0xe50 net/netlink/af_netlink.c:1921 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg+0x154/0x190 net/socket.c:734 ____sys_sendmsg+0x6df/0x840 net/socket.c:2482 ___sys_sendmsg+0x110/0x1b0 net/socket.c:2536 __sys_sendmsg+0xf3/0x1c0 net/socket.c:2565 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7fdcf2072359 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 f1 19 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fdcf13e3168 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007fdcf219ff80 RCX: 00007fdcf2072359 RDX: 0000000000000000 RSI: 0000000020000200 RDI: 0000000000000003 RBP: 00007fdcf20bd493 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007fffbb8d7bdf R14: 00007fdcf13e3300 R15: 0000000000022000 </TASK> The buggy address belongs to the variable: rmnet_policy+0x30/0xe0 The buggy address belongs to the physical page: page:0000000065bdeb3c refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x155243 flags: 0x200000000001000(reserved|node=0|zone=2) raw: 0200000000001000 ffffea00055490c8 ffffea00055490c8 0000000000000000 raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffffffff92c43780: f9 f9 f9 f9 00 00 00 02 f9 f9 f9 f9 00 00 00 07 ffffffff92c43800: f9 f9 f9 f9 00 00 00 05 f9 f9 f9 f9 06 f9 f9 f9 >ffffffff92c43880: f9 f9 f9 f9 00 00 00 00 00 00 f9 f9 f9 f9 f9 f9 ^ ffffffff92c43900: 00 00 00 00 00 00 00 00 07 f9 f9 f9 f9 f9 f9 f9 ffffffff92c43980: 00 00 00 07 f9 f9 f9 f9 00 00 00 05 f9 f9 f9 f9 According to the comment of `nla_parse_nested_deprecated`, the maxtype should be len(destination array) - 1. Hence use `IFLA_RMNET_MAX` here.

In the Linux kernel, the following vulnerability has been resolved: rust: arm64: set uwtable llvm module flag for CONFIG_UNWIND_TABLES Due to a rustc bug [1] the -Cforce-unwind-tables=y flag only emits the uwtable annotation for functions, but not for the module. This means that compiler-generated functions such as 'asan.module_ctor' do not receive the uwtable annotation. When CONFIG_UNWIND_PATCH_PAC_INTO_SCS is enabled, this leads to boot failures because the dwarf information emitted for the kasan constructors is wrong, which causes the SCS boot patching code to patch the constructor in an illegal manner. Specifically, the paciasp instruction is patched, but the autiasp instruction is not. This mismatch leads to a crash when the constructor is called during boot. ================================================================== BUG: KASAN: global-out-of-bounds in do_basic_setup+0x4c/0x90 Read of size 8 at addr ffffffe3cc7eb488 by task swapper/0/1 Specifically the faulting instruction is the (*fn)() to invoke the constructor in do_ctors() of the init/main.c file. Once the fix lands in rustc, this flag can be made conditional on the rustc version. Note that passing the flag on a rustc with the fix present has no effect. [ The fix [1] has landed for Rust 1.98.0 (expected release on 2026-08-20). Thus add a version check as discussed. - Miguel ] [ Adjusted link and comment. - Miguel ]

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix out-of-bounds read in dp_get_eq_aux_rd_interval() [Why & How] The aux_rd_interval array in struct dc_lttpr_caps is declared with MAX_REPEATER_CNT - 1 (7) elements, indexed 0..6. However, the offset parameter passed to dp_get_eq_aux_rd_interval() can be as large as MAX_REPEATER_CNT (8) when a sink reports 8 LTTPR repeaters via DPCD. This leads to an out-of-bounds read of aux_rd_interval[7] when offset is 8. Fix this by growing aux_rd_interval to MAX_REPEATER_CNT elements to accommodate the full range of valid repeater counts defined by the DP spec. (cherry picked from commit a55a458a8df37a65ffda5cf721d554a8f74f6b04)

In the Linux kernel, the following vulnerability has been resolved: HID: uclogic: Fix user-memory-access bug in uclogic_params_ugee_v2_init_event_hooks() When CONFIG_HID_UCLOGIC=y and CONFIG_KUNIT_ALL_TESTS=y, launch kernel and then the below user-memory-access bug occurs. In hid_test_uclogic_params_cleanup_event_hooks(),it call uclogic_params_ugee_v2_init_event_hooks() with the first arg=NULL, so when it calls uclogic_params_ugee_v2_has_battery(), the hid_get_drvdata() will access hdev->dev with hdev=NULL, which will cause below user-memory-access. So add a fake_device with quirks member and call hid_set_drvdata() to assign hdev->dev->driver_data which avoids the null-ptr-def bug for drvdata->quirks in uclogic_params_ugee_v2_has_battery(). After applying this patch, the below user-memory-access bug never occurs. general protection fault, probably for non-canonical address 0xdffffc0000000329: 0000 [#1] PREEMPT SMP KASAN KASAN: probably user-memory-access in range [0x0000000000001948-0x000000000000194f] CPU: 5 PID: 2189 Comm: kunit_try_catch Tainted: G B W N 6.6.0-rc2+ #30 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 RIP: 0010:uclogic_params_ugee_v2_init_event_hooks+0x87/0x600 Code: f3 f3 65 48 8b 14 25 28 00 00 00 48 89 54 24 60 31 d2 48 89 fa c7 44 24 30 00 00 00 00 48 c7 44 24 28 02 f8 02 01 48 c1 ea 03 <80> 3c 02 00 0f 85 2c 04 00 00 48 8b 9d 48 19 00 00 48 b8 00 00 00 RSP: 0000:ffff88810679fc88 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 0000000000000004 RCX: 0000000000000000 RDX: 0000000000000329 RSI: ffff88810679fd88 RDI: 0000000000001948 RBP: 0000000000000000 R08: 0000000000000000 R09: ffffed1020f639f0 R10: ffff888107b1cf87 R11: 0000000000000400 R12: 1ffff11020cf3f92 R13: ffff88810679fd88 R14: ffff888100b97b08 R15: ffff8881030bb080 FS: 0000000000000000(0000) GS:ffff888119e80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000005286001 CR4: 0000000000770ee0 DR0: ffffffff8fdd6cf4 DR1: ffffffff8fdd6cf5 DR2: ffffffff8fdd6cf6 DR3: ffffffff8fdd6cf7 DR6: 00000000fffe0ff0 DR7: 0000000000000600 PKRU: 55555554 Call Trace: <TASK> ? die_addr+0x3d/0xa0 ? exc_general_protection+0x144/0x220 ? asm_exc_general_protection+0x22/0x30 ? uclogic_params_ugee_v2_init_event_hooks+0x87/0x600 ? sched_clock_cpu+0x69/0x550 ? uclogic_parse_ugee_v2_desc_gen_params+0x70/0x70 ? load_balance+0x2950/0x2950 ? rcu_trc_cmpxchg_need_qs+0x67/0xa0 hid_test_uclogic_params_cleanup_event_hooks+0x9e/0x1a0 ? uclogic_params_ugee_v2_init_event_hooks+0x600/0x600 ? __switch_to+0x5cf/0xe60 ? migrate_enable+0x260/0x260 ? __kthread_parkme+0x83/0x150 ? kunit_try_run_case_cleanup+0xe0/0xe0 kunit_generic_run_threadfn_adapter+0x4a/0x90 ? kunit_try_catch_throw+0x80/0x80 kthread+0x2b5/0x380 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x2d/0x70 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork_asm+0x11/0x20 </TASK> Modules linked in: Dumping ftrace buffer: (ftrace buffer empty) ---[ end trace 0000000000000000 ]--- RIP: 0010:uclogic_params_ugee_v2_init_event_hooks+0x87/0x600 Code: f3 f3 65 48 8b 14 25 28 00 00 00 48 89 54 24 60 31 d2 48 89 fa c7 44 24 30 00 00 00 00 48 c7 44 24 28 02 f8 02 01 48 c1 ea 03 <80> 3c 02 00 0f 85 2c 04 00 00 48 8b 9d 48 19 00 00 48 b8 00 00 00 RSP: 0000:ffff88810679fc88 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 0000000000000004 RCX: 0000000000000000 RDX: 0000000000000329 RSI: ffff88810679fd88 RDI: 0000000000001948 RBP: 0000000000000000 R08: 0000000000000000 R09: ffffed1020f639f0 R10: ffff888107b1cf87 R11: 0000000000000400 R12: 1ffff11020cf3f92 R13: ffff88810679fd88 R14: ffff888100b97b08 R15: ffff8881030bb080 FS: 0000000000000000(0000) GS:ffff888119e80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000005286001 CR4: 0000000000770ee0 DR0: ffffffff8fdd6cf4 DR1: ---truncated---

In the Linux kernel, the following vulnerability has been resolved: dm-verity-fec: fix reading parity bytes split across blocks (take 3) fec_decode_bufs() assumes that the parity bytes of the first RS codeword it decodes are never split across parity blocks. This assumption is false. Consider v->fec->block_size == 4096 && v->fec->roots == 17 && fio->nbufs == 1, for example. In that case, each call to fec_decode_bufs() consumes v->fec->roots * (fio->nbufs << DM_VERITY_FEC_BUF_RS_BITS) = 272 parity bytes. Considering that the parity data for each message block starts on a block boundary, the byte alignment in the parity data will iterate through 272*i mod 4096 until the 3 parity blocks have been consumed. On the 16th call (i=15), the alignment will be 4080 bytes into the first block. Only 16 bytes remain in that block, but 17 parity bytes will be needed. The code reads out-of-bounds from the parity block buffer. Fortunately this doesn't normally happen, since it can occur only for certain non-default values of fec_roots *and* when the maximum number of buffers couldn't be allocated due to low memory. For example with block_size=4096 only the following cases are affected: fec_roots=17: nbufs in [1, 3, 5, 15] fec_roots=19: nbufs in [1, 229] fec_roots=21: nbufs in [1, 3, 5, 13, 15, 39, 65, 195] fec_roots=23: nbufs in [1, 89] Regardless, fix it by refactoring how the parity blocks are read.

In the Linux kernel, the following vulnerability has been resolved: net: guard timestamp cmsgs to real error queue skbs skb_is_err_queue() treats PACKET_OUTGOING as the sole marker for an skb from sk_error_queue. That assumption is not true for AF_PACKET sockets: outgoing packet taps are also delivered to packet sockets with skb->pkt_type == PACKET_OUTGOING, but their skb->cb is owned by AF_PACKET instead of struct sock_exterr_skb. If such an skb is received with timestamping enabled, the generic timestamp cmsg path can read AF_PACKET control-buffer state as sock_exterr_skb::opt_stats. With SO_RXQ_OVFL enabled, the packet drop counter overlaps opt_stats. An odd drop count makes the path emit SCM_TIMESTAMPING_OPT_STATS with skb->len and skb->data. For non-linear skbs this copies past the linear head and can trigger hardened usercopy or disclose adjacent heap contents. Keep skb_is_err_queue() local to net/socket.c, but make it verify that the PACKET_OUTGOING marker is paired with the sock_rmem_free destructor installed by sock_queue_err_skb(). AF_PACKET receive skbs use normal receive ownership and no longer pass as error-queue skbs, while legitimate sk_error_queue entries keep the PACKET_OUTGOING marker and sock_rmem_free ownership.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Bound VBIOS record-chain walk loops [Why & How] All record-chain walk loops in bios_parser.c and bios_parser2.c use for(;;) and only terminate on a 0xFF record_type sentinel or zero record_size. A malformed VBIOS image missing the terminator record causes unbounded iteration at probe time, potentially hundreds of thousands of iterations with record_size=1. In the final iterations near the BIOS image boundary, struct casts beyond the 2-byte header validated by GET_IMAGE can also read out of bounds. Cap all 14 record-chain walk loops to BIOS_MAX_NUM_RECORD (256) iterations. The atombios.h defines up to 22 distinct record types and atomfirmware.h has 13. Assuming an average of less than 10 records per type (which is reasonable since most are connector- based) 256 is a generous upper bound. (cherry picked from commit 95700a3d660287ed657d6892f7be9ffc0e294a93)

In the Linux kernel, the following vulnerability has been resolved: drm/komeda: fix integer overflow in AFBC framebuffer size check The AFBC framebuffer size validation calculates the minimum required buffer size by adding the AFBC payload size to the framebuffer offset. This addition is performed without checking for integer overflow. If the addition oveflows, the size check may incorrectly succed and allow userspace to provide an undersized drm_gem_object, potentially leading to out-of-bounds memory access. Add usage of check_add_overflow() to safely compute the minimum required size and reject the framebuffer if an overflow is detected. This makes the AFBC size validation more robust against malformed. Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: soc/tegra: cbb: Fix incorrect ARRAY_SIZE in fabric lookup tables Fix incorrect ARRAY_SIZE usage in fabric lookup tables which could cause out-of-bounds access during target timeout lookup.

In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Bound root directory content to block size __tb_property_parse_dir() does not check that content_offset + content_len fits within block_len for the root directory case. When rootdir->length equals or exceeds block_len - 2, the entry loop reads past the allocated property block. Add a bounds check after computing content_offset and content_len to reject directories whose content extends past the block.

In the Linux kernel, the following vulnerability has been resolved: sctp: diag: reject stale associations in dump_one path The SCTP exact sock_diag lookup can hold a transport reference, block on lock_sock(sk), and then resume after sctp_association_free() has marked the association dead and freed its bind address list. When that happens, inet_assoc_attr_size() and inet_diag_msg_sctpasoc_fill() can still dereference association state that is no longer valid for reporting. In particular, inet_diag_msg_sctpasoc_fill() may read an empty bind-address list as a real sctp_sockaddr_entry and trigger an out-of-bounds read from unrelated association memory. Reject the association after taking the socket lock if it has been reaped or detached from the endpoint, and report the lookup as stale. This keeps the exact dump-one path from formatting torn association state.

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix OOB in pcpu_init_value An out-of-bounds read occurs when copying element from a BPF_MAP_TYPE_CGROUP_STORAGE map to another pcpu map with the same value_size that is not rounded up to 8 bytes. The issue happens when: 1. A CGROUP_STORAGE map is created with value_size not aligned to 8 bytes (e.g., 4 bytes) 2. A pcpu map is created with the same value_size (e.g., 4 bytes) 3. Update element in 2 with data in 1 pcpu_init_value assumes that all sources are rounded up to 8 bytes, and invokes copy_map_value_long to make a data copy, However, the assumption doesn't stand since there are some cases where the source may not be rounded up to 8 bytes, e.g., CGROUP_STORAGE, skb->data. the verifier verifies exactly the size that the source claims, not the size rounded up to 8 bytes by kernel, an OOB happens when the source has only 4 bytes while the copy size(4) is rounded up to 8.

In the Linux kernel, the following vulnerability has been resolved: KVM: s390: pci: fix GAIT table indexing due to double-scaling pointer arithmetic kvm_s390_pci_aif_enable(), kvm_s390_pci_aif_disable(), and aen_host_forward() index the GAIT by manually multiplying the index with sizeof(struct zpci_gaite). Since aift->gait is already a struct zpci_gaite pointer, this double-scales the offset, accessing element aisb*16 instead of aisb. This causes out-of-bounds accesses when aisb >= 32 (with ZPCI_NR_DEVICES=512) Fix by removing the erroneous sizeof multiplication.

In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix listxattr handling when the buffer is full [BUG] If an OCFS2 inode has both inline and block-based xattrs, listxattr() can return a size larger than the caller's buffer when the inline names consume that buffer exactly. kernel BUG at mm/usercopy.c:102! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI RIP: 0010:usercopy_abort+0xb7/0xd0 mm/usercopy.c:102 Call Trace: __check_heap_object+0xe3/0x120 mm/slub.c:8243 check_heap_object mm/usercopy.c:196 [inline] __check_object_size mm/usercopy.c:250 [inline] __check_object_size+0x5c5/0x780 mm/usercopy.c:215 check_object_size include/linux/ucopysize.h:22 [inline] check_copy_size include/linux/ucopysize.h:59 [inline] copy_to_user include/linux/uaccess.h:219 [inline] listxattr+0xb0/0x170 fs/xattr.c:926 filename_listxattr fs/xattr.c:958 [inline] path_listxattrat+0x137/0x320 fs/xattr.c:988 __do_sys_listxattr fs/xattr.c:1001 [inline] __se_sys_listxattr fs/xattr.c:998 [inline] __x64_sys_listxattr+0x7f/0xd0 fs/xattr.c:998 ... [CAUSE] Commit 936b8834366e ("ocfs2: Refactor xattr list and remove ocfs2_xattr_handler().") replaced the old per-handler list accounting with ocfs2_xattr_list_entry(), but it kept using size == 0 to detect probe mode. That assumption stops being true once ocfs2_listxattr() finishes the inline-xattr pass. If the inline names fill the caller buffer exactly, the block-xattr pass runs with a non-NULL buffer and a remaining size of zero. ocfs2_xattr_list_entry() then skips the bounds check, keeps counting block names, and returns a positive size larger than the supplied buffer. [FIX] Detect probe mode by testing whether the destination buffer pointer is NULL instead of whether the remaining size is zero. That restores the pre-refactor behavior and matches the OCFS2 getxattr helpers. Once the remaining buffer reaches zero while more names are left, the block-xattr pass now returns -ERANGE instead of reporting a size larger than the allocated list buffer.

In the Linux kernel, the following vulnerability has been resolved: accel/ivpu: Add bounds checks for firmware log indices Add validation that read and write indices in the firmware log buffer are within valid bounds (< data_size) before using them. If out-of-bounds indices are encountered (from firmware), clamp them to safe values instead of proceeding with invalid offsets. This prevents potential out-of-bounds buffer access when firmware supplies invalid log indices.

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to tag gcing flag on page during block migration It needs to add missing gcing flag on page during block migration, in order to garantee migrated data be persisted during checkpoint, otherwise out-of-order persistency between data and node may cause data corruption after SPOR. Similar issue was fixed by commit 2d1fe8a86bf5 ("f2fs: fix to tag gcing flag on page during file defragment").

In the Linux kernel, the following vulnerability has been resolved: spi: cadence-quadspi: fix unclocked access on unbind Make sure that the controller is runtime resumed before disabling it during driver unbind to avoid an unclocked register access. This issue was flagged by Sashiko when reviewing a controller deregistration fix.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Add bounds checking to ib_{get,set}_value The uvd/vce/vcn code accesses the IB at predefined offsets without checking that the IB is large enough. Check the bounds here. The caller is responsible for making sure it can handle arbitrary return values. Also make the idx a uint32_t to prevent overflows causing the condition to fail.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/vcn4: Prevent OOB reads when parsing dec msg Check bounds against the end of the BO whenever we access the msg.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/vcn4: Prevent OOB reads when parsing IB Rewrite the IB parsing to use amdgpu_ib_get_value() which handles the bounds checks.