In the Linux kernel, the following vulnerability has been resolved: drm/mediatek: Init `ddp_comp` with devm_kcalloc() In the case where `conn_routes` is true we allocate an extra slot in the `ddp_comp` array but mtk_drm_crtc_create() never seemed to initialize it in the test case I ran. For me, this caused a later crash when we looped through the array in mtk_drm_crtc_mode_valid(). This showed up for me when I booted with `slub_debug=FZPUA` which poisons the memory initially. Without `slub_debug` I couldn't reproduce, presumably because the later code handles the value being NULL and in most cases (not guaranteed in all cases) the memory the allocator returned started out as 0. It really doesn't hurt to initialize the array with devm_kcalloc() since the array is small and the overhead of initting a handful of elements to 0 is small. In general initting memory to zero is a safer practice and usually it's suggested to only use the non-initting alloc functions if you really need to. Let's switch the function to use an allocation function that zeros the memory. For me, this avoids the crash.

In the Linux kernel, the following vulnerability has been resolved: net: hns3: fix kernel crash when devlink reload during initialization The devlink reload process will access the hardware resources, but the register operation is done before the hardware is initialized. So, processing the devlink reload during initialization may lead to kernel crash. This patch fixes this by registering the devlink after hardware initialization.

In the Linux kernel, the following vulnerability has been resolved: ipv6: Fix potential uninit-value access in __ip6_make_skb() As it was done in commit fc1092f51567 ("ipv4: Fix uninit-value access in __ip_make_skb()") for IPv4, check FLOWI_FLAG_KNOWN_NH on fl6->flowi6_flags instead of testing HDRINCL on the socket to avoid a race condition which causes uninit-value access.

In the Linux kernel, the following vulnerability has been resolved: nsh: Restore skb->{protocol,data,mac_header} for outer header in nsh_gso_segment(). syzbot triggered various splats (see [0] and links) by a crafted GSO packet of VIRTIO_NET_HDR_GSO_UDP layering the following protocols: ETH_P_8021AD + ETH_P_NSH + ETH_P_IPV6 + IPPROTO_UDP NSH can encapsulate IPv4, IPv6, Ethernet, NSH, and MPLS. As the inner protocol can be Ethernet, NSH GSO handler, nsh_gso_segment(), calls skb_mac_gso_segment() to invoke inner protocol GSO handlers. nsh_gso_segment() does the following for the original skb before calling skb_mac_gso_segment() 1. reset skb->network_header 2. save the original skb->{mac_heaeder,mac_len} in a local variable 3. pull the NSH header 4. resets skb->mac_header 5. set up skb->mac_len and skb->protocol for the inner protocol. and does the following for the segmented skb 6. set ntohs(ETH_P_NSH) to skb->protocol 7. push the NSH header 8. restore skb->mac_header 9. set skb->mac_header + mac_len to skb->network_header 10. restore skb->mac_len There are two problems in 6-7 and 8-9. (a) After 6 & 7, skb->data points to the NSH header, so the outer header (ETH_P_8021AD in this case) is stripped when skb is sent out of netdev. Also, if NSH is encapsulated by NSH + Ethernet (so NSH-Ethernet-NSH), skb_pull() in the first nsh_gso_segment() will make skb->data point to the middle of the outer NSH or Ethernet header because the Ethernet header is not pulled by the second nsh_gso_segment(). (b) While restoring skb->{mac_header,network_header} in 8 & 9, nsh_gso_segment() does not assume that the data in the linear buffer is shifted. However, udp6_ufo_fragment() could shift the data and change skb->mac_header accordingly as demonstrated by syzbot. If this happens, even the restored skb->mac_header points to the middle of the outer header. It seems nsh_gso_segment() has never worked with outer headers so far. At the end of nsh_gso_segment(), the outer header must be restored for the segmented skb, instead of the NSH header. To do that, let's calculate the outer header position relatively from the inner header and set skb->{data,mac_header,protocol} properly. [0]: BUG: KMSAN: uninit-value in ipvlan_process_outbound drivers/net/ipvlan/ipvlan_core.c:524 [inline] BUG: KMSAN: uninit-value in ipvlan_xmit_mode_l3 drivers/net/ipvlan/ipvlan_core.c:602 [inline] BUG: KMSAN: uninit-value in ipvlan_queue_xmit+0xf44/0x16b0 drivers/net/ipvlan/ipvlan_core.c:668 ipvlan_process_outbound drivers/net/ipvlan/ipvlan_core.c:524 [inline] ipvlan_xmit_mode_l3 drivers/net/ipvlan/ipvlan_core.c:602 [inline] ipvlan_queue_xmit+0xf44/0x16b0 drivers/net/ipvlan/ipvlan_core.c:668 ipvlan_start_xmit+0x5c/0x1a0 drivers/net/ipvlan/ipvlan_main.c:222 __netdev_start_xmit include/linux/netdevice.h:4989 [inline] netdev_start_xmit include/linux/netdevice.h:5003 [inline] xmit_one net/core/dev.c:3547 [inline] dev_hard_start_xmit+0x244/0xa10 net/core/dev.c:3563 __dev_queue_xmit+0x33ed/0x51c0 net/core/dev.c:4351 dev_queue_xmit include/linux/netdevice.h:3171 [inline] packet_xmit+0x9c/0x6b0 net/packet/af_packet.c:276 packet_snd net/packet/af_packet.c:3081 [inline] packet_sendmsg+0x8aef/0x9f10 net/packet/af_packet.c:3113 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg net/socket.c:745 [inline] __sys_sendto+0x735/0xa10 net/socket.c:2191 __do_sys_sendto net/socket.c:2203 [inline] __se_sys_sendto net/socket.c:2199 [inline] __x64_sys_sendto+0x125/0x1c0 net/socket.c:2199 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b Uninit was created at: slab_post_alloc_hook mm/slub.c:3819 [inline] slab_alloc_node mm/slub.c:3860 [inline] __do_kmalloc_node mm/slub.c:3980 [inline] __kmalloc_node_track_caller+0x705/0x1000 mm/slub.c:4001 kmalloc_reserve+0x249/0x4a0 net/core/skbuff.c:582 __ ---truncated---

In the Linux kernel, the following vulnerability has been resolved: net/sched: act_skbmod: prevent kernel-infoleak syzbot found that tcf_skbmod_dump() was copying four bytes from kernel stack to user space [1]. The issue here is that 'struct tc_skbmod' has a four bytes hole. We need to clear the structure before filling fields. [1] BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:114 [inline] BUG: KMSAN: kernel-infoleak in copy_to_user_iter lib/iov_iter.c:24 [inline] BUG: KMSAN: kernel-infoleak in iterate_ubuf include/linux/iov_iter.h:29 [inline] BUG: KMSAN: kernel-infoleak in iterate_and_advance2 include/linux/iov_iter.h:245 [inline] BUG: KMSAN: kernel-infoleak in iterate_and_advance include/linux/iov_iter.h:271 [inline] BUG: KMSAN: kernel-infoleak in _copy_to_iter+0x366/0x2520 lib/iov_iter.c:185 instrument_copy_to_user include/linux/instrumented.h:114 [inline] copy_to_user_iter lib/iov_iter.c:24 [inline] iterate_ubuf include/linux/iov_iter.h:29 [inline] iterate_and_advance2 include/linux/iov_iter.h:245 [inline] iterate_and_advance include/linux/iov_iter.h:271 [inline] _copy_to_iter+0x366/0x2520 lib/iov_iter.c:185 copy_to_iter include/linux/uio.h:196 [inline] simple_copy_to_iter net/core/datagram.c:532 [inline] __skb_datagram_iter+0x185/0x1000 net/core/datagram.c:420 skb_copy_datagram_iter+0x5c/0x200 net/core/datagram.c:546 skb_copy_datagram_msg include/linux/skbuff.h:4050 [inline] netlink_recvmsg+0x432/0x1610 net/netlink/af_netlink.c:1962 sock_recvmsg_nosec net/socket.c:1046 [inline] sock_recvmsg+0x2c4/0x340 net/socket.c:1068 __sys_recvfrom+0x35a/0x5f0 net/socket.c:2242 __do_sys_recvfrom net/socket.c:2260 [inline] __se_sys_recvfrom net/socket.c:2256 [inline] __x64_sys_recvfrom+0x126/0x1d0 net/socket.c:2256 do_syscall_64+0xd5/0x1f0 entry_SYSCALL_64_after_hwframe+0x6d/0x75 Uninit was stored to memory at: pskb_expand_head+0x30f/0x19d0 net/core/skbuff.c:2253 netlink_trim+0x2c2/0x330 net/netlink/af_netlink.c:1317 netlink_unicast+0x9f/0x1260 net/netlink/af_netlink.c:1351 nlmsg_unicast include/net/netlink.h:1144 [inline] nlmsg_notify+0x21d/0x2f0 net/netlink/af_netlink.c:2610 rtnetlink_send+0x73/0x90 net/core/rtnetlink.c:741 rtnetlink_maybe_send include/linux/rtnetlink.h:17 [inline] tcf_add_notify net/sched/act_api.c:2048 [inline] tcf_action_add net/sched/act_api.c:2071 [inline] tc_ctl_action+0x146e/0x19d0 net/sched/act_api.c:2119 rtnetlink_rcv_msg+0x1737/0x1900 net/core/rtnetlink.c:6595 netlink_rcv_skb+0x375/0x650 net/netlink/af_netlink.c:2559 rtnetlink_rcv+0x34/0x40 net/core/rtnetlink.c:6613 netlink_unicast_kernel net/netlink/af_netlink.c:1335 [inline] netlink_unicast+0xf4c/0x1260 net/netlink/af_netlink.c:1361 netlink_sendmsg+0x10df/0x11f0 net/netlink/af_netlink.c:1905 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:745 ____sys_sendmsg+0x877/0xb60 net/socket.c:2584 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2638 __sys_sendmsg net/socket.c:2667 [inline] __do_sys_sendmsg net/socket.c:2676 [inline] __se_sys_sendmsg net/socket.c:2674 [inline] __x64_sys_sendmsg+0x307/0x4a0 net/socket.c:2674 do_syscall_64+0xd5/0x1f0 entry_SYSCALL_64_after_hwframe+0x6d/0x75 Uninit was stored to memory at: __nla_put lib/nlattr.c:1041 [inline] nla_put+0x1c6/0x230 lib/nlattr.c:1099 tcf_skbmod_dump+0x23f/0xc20 net/sched/act_skbmod.c:256 tcf_action_dump_old net/sched/act_api.c:1191 [inline] tcf_action_dump_1+0x85e/0x970 net/sched/act_api.c:1227 tcf_action_dump+0x1fd/0x460 net/sched/act_api.c:1251 tca_get_fill+0x519/0x7a0 net/sched/act_api.c:1628 tcf_add_notify_msg net/sched/act_api.c:2023 [inline] tcf_add_notify net/sched/act_api.c:2042 [inline] tcf_action_add net/sched/act_api.c:2071 [inline] tc_ctl_action+0x1365/0x19d0 net/sched/act_api.c:2119 rtnetlink_rcv_msg+0x1737/0x1900 net/core/rtnetlink.c:6595 netlink_rcv_skb+0x375/0x650 net/netlink/af_netli ---truncated---

In the Linux kernel, the following vulnerability has been resolved: geneve: fix header validation in geneve[6]_xmit_skb syzbot is able to trigger an uninit-value in geneve_xmit() [1] Problem : While most ip tunnel helpers (like ip_tunnel_get_dsfield()) uses skb_protocol(skb, true), pskb_inet_may_pull() is only using skb->protocol. If anything else than ETH_P_IPV6 or ETH_P_IP is found in skb->protocol, pskb_inet_may_pull() does nothing at all. If a vlan tag was provided by the caller (af_packet in the syzbot case), the network header might not point to the correct location, and skb linear part could be smaller than expected. Add skb_vlan_inet_prepare() to perform a complete mac validation. Use this in geneve for the moment, I suspect we need to adopt this more broadly. v4 - Jakub reported v3 broke l2_tos_ttl_inherit.sh selftest - Only call __vlan_get_protocol() for vlan types. v2,v3 - Addressed Sabrina comments on v1 and v2 [1] BUG: KMSAN: uninit-value in geneve_xmit_skb drivers/net/geneve.c:910 [inline] BUG: KMSAN: uninit-value in geneve_xmit+0x302d/0x5420 drivers/net/geneve.c:1030 geneve_xmit_skb drivers/net/geneve.c:910 [inline] geneve_xmit+0x302d/0x5420 drivers/net/geneve.c:1030 __netdev_start_xmit include/linux/netdevice.h:4903 [inline] netdev_start_xmit include/linux/netdevice.h:4917 [inline] xmit_one net/core/dev.c:3531 [inline] dev_hard_start_xmit+0x247/0xa20 net/core/dev.c:3547 __dev_queue_xmit+0x348d/0x52c0 net/core/dev.c:4335 dev_queue_xmit include/linux/netdevice.h:3091 [inline] packet_xmit+0x9c/0x6c0 net/packet/af_packet.c:276 packet_snd net/packet/af_packet.c:3081 [inline] packet_sendmsg+0x8bb0/0x9ef0 net/packet/af_packet.c:3113 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:745 __sys_sendto+0x685/0x830 net/socket.c:2191 __do_sys_sendto net/socket.c:2203 [inline] __se_sys_sendto net/socket.c:2199 [inline] __x64_sys_sendto+0x125/0x1d0 net/socket.c:2199 do_syscall_64+0xd5/0x1f0 entry_SYSCALL_64_after_hwframe+0x6d/0x75 Uninit was created at: slab_post_alloc_hook mm/slub.c:3804 [inline] slab_alloc_node mm/slub.c:3845 [inline] kmem_cache_alloc_node+0x613/0xc50 mm/slub.c:3888 kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:577 __alloc_skb+0x35b/0x7a0 net/core/skbuff.c:668 alloc_skb include/linux/skbuff.h:1318 [inline] alloc_skb_with_frags+0xc8/0xbf0 net/core/skbuff.c:6504 sock_alloc_send_pskb+0xa81/0xbf0 net/core/sock.c:2795 packet_alloc_skb net/packet/af_packet.c:2930 [inline] packet_snd net/packet/af_packet.c:3024 [inline] packet_sendmsg+0x722d/0x9ef0 net/packet/af_packet.c:3113 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:745 __sys_sendto+0x685/0x830 net/socket.c:2191 __do_sys_sendto net/socket.c:2203 [inline] __se_sys_sendto net/socket.c:2199 [inline] __x64_sys_sendto+0x125/0x1d0 net/socket.c:2199 do_syscall_64+0xd5/0x1f0 entry_SYSCALL_64_after_hwframe+0x6d/0x75 CPU: 0 PID: 5033 Comm: syz-executor346 Not tainted 6.9.0-rc1-syzkaller-00005-g928a87efa423 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/29/2024

In the Linux kernel, the following vulnerability has been resolved: cpumap: Zero-initialise xdp_rxq_info struct before running XDP program When running an XDP program that is attached to a cpumap entry, we don't initialise the xdp_rxq_info data structure being used in the xdp_buff that backs the XDP program invocation. Tobias noticed that this leads to random values being returned as the xdp_md->rx_queue_index value for XDP programs running in a cpumap. This means we're basically returning the contents of the uninitialised memory, which is bad. Fix this by zero-initialising the rxq data structure before running the XDP program.

In the Linux kernel, the following vulnerability has been resolved: btrfs: don't abort filesystem when attempting to snapshot deleted subvolume If the source file descriptor to the snapshot ioctl refers to a deleted subvolume, we get the following abort: BTRFS: Transaction aborted (error -2) WARNING: CPU: 0 PID: 833 at fs/btrfs/transaction.c:1875 create_pending_snapshot+0x1040/0x1190 [btrfs] Modules linked in: pata_acpi btrfs ata_piix libata scsi_mod virtio_net blake2b_generic xor net_failover virtio_rng failover scsi_common rng_core raid6_pq libcrc32c CPU: 0 PID: 833 Comm: t_snapshot_dele Not tainted 6.7.0-rc6 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-1.fc39 04/01/2014 RIP: 0010:create_pending_snapshot+0x1040/0x1190 [btrfs] RSP: 0018:ffffa09c01337af8 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff9982053e7c78 RCX: 0000000000000027 RDX: ffff99827dc20848 RSI: 0000000000000001 RDI: ffff99827dc20840 RBP: ffffa09c01337c00 R08: 0000000000000000 R09: ffffa09c01337998 R10: 0000000000000003 R11: ffffffffb96da248 R12: fffffffffffffffe R13: ffff99820535bb28 R14: ffff99820b7bd000 R15: ffff99820381ea80 FS: 00007fe20aadabc0(0000) GS:ffff99827dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000559a120b502f CR3: 00000000055b6000 CR4: 00000000000006f0 Call Trace: <TASK> ? create_pending_snapshot+0x1040/0x1190 [btrfs] ? __warn+0x81/0x130 ? create_pending_snapshot+0x1040/0x1190 [btrfs] ? report_bug+0x171/0x1a0 ? handle_bug+0x3a/0x70 ? exc_invalid_op+0x17/0x70 ? asm_exc_invalid_op+0x1a/0x20 ? create_pending_snapshot+0x1040/0x1190 [btrfs] ? create_pending_snapshot+0x1040/0x1190 [btrfs] create_pending_snapshots+0x92/0xc0 [btrfs] btrfs_commit_transaction+0x66b/0xf40 [btrfs] btrfs_mksubvol+0x301/0x4d0 [btrfs] btrfs_mksnapshot+0x80/0xb0 [btrfs] __btrfs_ioctl_snap_create+0x1c2/0x1d0 [btrfs] btrfs_ioctl_snap_create_v2+0xc4/0x150 [btrfs] btrfs_ioctl+0x8a6/0x2650 [btrfs] ? kmem_cache_free+0x22/0x340 ? do_sys_openat2+0x97/0xe0 __x64_sys_ioctl+0x97/0xd0 do_syscall_64+0x46/0xf0 entry_SYSCALL_64_after_hwframe+0x6e/0x76 RIP: 0033:0x7fe20abe83af RSP: 002b:00007ffe6eff1360 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 00007fe20abe83af RDX: 00007ffe6eff23c0 RSI: 0000000050009417 RDI: 0000000000000003 RBP: 0000000000000003 R08: 0000000000000000 R09: 00007fe20ad16cd0 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007ffe6eff13c0 R14: 00007fe20ad45000 R15: 0000559a120b6d58 </TASK> ---[ end trace 0000000000000000 ]--- BTRFS: error (device vdc: state A) in create_pending_snapshot:1875: errno=-2 No such entry BTRFS info (device vdc: state EA): forced readonly BTRFS warning (device vdc: state EA): Skipping commit of aborted transaction. BTRFS: error (device vdc: state EA) in cleanup_transaction:2055: errno=-2 No such entry This happens because create_pending_snapshot() initializes the new root item as a copy of the source root item. This includes the refs field, which is 0 for a deleted subvolume. The call to btrfs_insert_root() therefore inserts a root with refs == 0. btrfs_get_new_fs_root() then finds the root and returns -ENOENT if refs == 0, which causes create_pending_snapshot() to abort. Fix it by checking the source root's refs before attempting the snapshot, but after locking subvol_sem to avoid racing with deletion.

In the Linux kernel, the following vulnerability has been resolved: do_sys_name_to_handle(): use kzalloc() to fix kernel-infoleak syzbot identified a kernel information leak vulnerability in do_sys_name_to_handle() and issued the following report [1]. [1] "BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:114 [inline] BUG: KMSAN: kernel-infoleak in _copy_to_user+0xbc/0x100 lib/usercopy.c:40 instrument_copy_to_user include/linux/instrumented.h:114 [inline] _copy_to_user+0xbc/0x100 lib/usercopy.c:40 copy_to_user include/linux/uaccess.h:191 [inline] do_sys_name_to_handle fs/fhandle.c:73 [inline] __do_sys_name_to_handle_at fs/fhandle.c:112 [inline] __se_sys_name_to_handle_at+0x949/0xb10 fs/fhandle.c:94 __x64_sys_name_to_handle_at+0xe4/0x140 fs/fhandle.c:94 ... Uninit was created at: slab_post_alloc_hook+0x129/0xa70 mm/slab.h:768 slab_alloc_node mm/slub.c:3478 [inline] __kmem_cache_alloc_node+0x5c9/0x970 mm/slub.c:3517 __do_kmalloc_node mm/slab_common.c:1006 [inline] __kmalloc+0x121/0x3c0 mm/slab_common.c:1020 kmalloc include/linux/slab.h:604 [inline] do_sys_name_to_handle fs/fhandle.c:39 [inline] __do_sys_name_to_handle_at fs/fhandle.c:112 [inline] __se_sys_name_to_handle_at+0x441/0xb10 fs/fhandle.c:94 __x64_sys_name_to_handle_at+0xe4/0x140 fs/fhandle.c:94 ... Bytes 18-19 of 20 are uninitialized Memory access of size 20 starts at ffff888128a46380 Data copied to user address 0000000020000240" Per Chuck Lever's suggestion, use kzalloc() instead of kmalloc() to solve the problem.

In the Linux kernel, the following vulnerability has been resolved: iio: adc: ad4130: zero-initialize clock init data The clk_init_data struct does not have all its members initialized, causing issues when trying to expose the internal clock on the CLK pin. Fix this by zero-initializing the clk_init_data struct.

In the Linux kernel, the following vulnerability has been resolved: ip6_tunnel: make sure to pull inner header in __ip6_tnl_rcv() syzbot found __ip6_tnl_rcv() could access unitiliazed data [1]. Call pskb_inet_may_pull() to fix this, and initialize ipv6h variable after this call as it can change skb->head. [1] BUG: KMSAN: uninit-value in __INET_ECN_decapsulate include/net/inet_ecn.h:253 [inline] BUG: KMSAN: uninit-value in INET_ECN_decapsulate include/net/inet_ecn.h:275 [inline] BUG: KMSAN: uninit-value in IP6_ECN_decapsulate+0x7df/0x1e50 include/net/inet_ecn.h:321 __INET_ECN_decapsulate include/net/inet_ecn.h:253 [inline] INET_ECN_decapsulate include/net/inet_ecn.h:275 [inline] IP6_ECN_decapsulate+0x7df/0x1e50 include/net/inet_ecn.h:321 ip6ip6_dscp_ecn_decapsulate+0x178/0x1b0 net/ipv6/ip6_tunnel.c:727 __ip6_tnl_rcv+0xd4e/0x1590 net/ipv6/ip6_tunnel.c:845 ip6_tnl_rcv+0xce/0x100 net/ipv6/ip6_tunnel.c:888 gre_rcv+0x143f/0x1870 ip6_protocol_deliver_rcu+0xda6/0x2a60 net/ipv6/ip6_input.c:438 ip6_input_finish net/ipv6/ip6_input.c:483 [inline] NF_HOOK include/linux/netfilter.h:314 [inline] ip6_input+0x15d/0x430 net/ipv6/ip6_input.c:492 ip6_mc_input+0xa7e/0xc80 net/ipv6/ip6_input.c:586 dst_input include/net/dst.h:461 [inline] ip6_rcv_finish+0x5db/0x870 net/ipv6/ip6_input.c:79 NF_HOOK include/linux/netfilter.h:314 [inline] ipv6_rcv+0xda/0x390 net/ipv6/ip6_input.c:310 __netif_receive_skb_one_core net/core/dev.c:5532 [inline] __netif_receive_skb+0x1a6/0x5a0 net/core/dev.c:5646 netif_receive_skb_internal net/core/dev.c:5732 [inline] netif_receive_skb+0x58/0x660 net/core/dev.c:5791 tun_rx_batched+0x3ee/0x980 drivers/net/tun.c:1555 tun_get_user+0x53af/0x66d0 drivers/net/tun.c:2002 tun_chr_write_iter+0x3af/0x5d0 drivers/net/tun.c:2048 call_write_iter include/linux/fs.h:2084 [inline] new_sync_write fs/read_write.c:497 [inline] vfs_write+0x786/0x1200 fs/read_write.c:590 ksys_write+0x20f/0x4c0 fs/read_write.c:643 __do_sys_write fs/read_write.c:655 [inline] __se_sys_write fs/read_write.c:652 [inline] __x64_sys_write+0x93/0xd0 fs/read_write.c:652 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x6d/0x140 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b Uninit was created at: slab_post_alloc_hook+0x129/0xa70 mm/slab.h:768 slab_alloc_node mm/slub.c:3478 [inline] kmem_cache_alloc_node+0x5e9/0xb10 mm/slub.c:3523 kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:560 __alloc_skb+0x318/0x740 net/core/skbuff.c:651 alloc_skb include/linux/skbuff.h:1286 [inline] alloc_skb_with_frags+0xc8/0xbd0 net/core/skbuff.c:6334 sock_alloc_send_pskb+0xa80/0xbf0 net/core/sock.c:2787 tun_alloc_skb drivers/net/tun.c:1531 [inline] tun_get_user+0x1e8a/0x66d0 drivers/net/tun.c:1846 tun_chr_write_iter+0x3af/0x5d0 drivers/net/tun.c:2048 call_write_iter include/linux/fs.h:2084 [inline] new_sync_write fs/read_write.c:497 [inline] vfs_write+0x786/0x1200 fs/read_write.c:590 ksys_write+0x20f/0x4c0 fs/read_write.c:643 __do_sys_write fs/read_write.c:655 [inline] __se_sys_write fs/read_write.c:652 [inline] __x64_sys_write+0x93/0xd0 fs/read_write.c:652 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x6d/0x140 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b CPU: 0 PID: 5034 Comm: syz-executor331 Not tainted 6.7.0-syzkaller-00562-g9f8413c4a66f #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/17/2023

In the Linux kernel, the following vulnerability has been resolved: geneve: make sure to pull inner header in geneve_rx() syzbot triggered a bug in geneve_rx() [1] Issue is similar to the one I fixed in commit 8d975c15c0cd ("ip6_tunnel: make sure to pull inner header in __ip6_tnl_rcv()") We have to save skb->network_header in a temporary variable in order to be able to recompute the network_header pointer after a pskb_inet_may_pull() call. pskb_inet_may_pull() makes sure the needed headers are in skb->head. [1] BUG: KMSAN: uninit-value in IP_ECN_decapsulate include/net/inet_ecn.h:302 [inline] BUG: KMSAN: uninit-value in geneve_rx drivers/net/geneve.c:279 [inline] BUG: KMSAN: uninit-value in geneve_udp_encap_recv+0x36f9/0x3c10 drivers/net/geneve.c:391 IP_ECN_decapsulate include/net/inet_ecn.h:302 [inline] geneve_rx drivers/net/geneve.c:279 [inline] geneve_udp_encap_recv+0x36f9/0x3c10 drivers/net/geneve.c:391 udp_queue_rcv_one_skb+0x1d39/0x1f20 net/ipv4/udp.c:2108 udp_queue_rcv_skb+0x6ae/0x6e0 net/ipv4/udp.c:2186 udp_unicast_rcv_skb+0x184/0x4b0 net/ipv4/udp.c:2346 __udp4_lib_rcv+0x1c6b/0x3010 net/ipv4/udp.c:2422 udp_rcv+0x7d/0xa0 net/ipv4/udp.c:2604 ip_protocol_deliver_rcu+0x264/0x1300 net/ipv4/ip_input.c:205 ip_local_deliver_finish+0x2b8/0x440 net/ipv4/ip_input.c:233 NF_HOOK include/linux/netfilter.h:314 [inline] ip_local_deliver+0x21f/0x490 net/ipv4/ip_input.c:254 dst_input include/net/dst.h:461 [inline] ip_rcv_finish net/ipv4/ip_input.c:449 [inline] NF_HOOK include/linux/netfilter.h:314 [inline] ip_rcv+0x46f/0x760 net/ipv4/ip_input.c:569 __netif_receive_skb_one_core net/core/dev.c:5534 [inline] __netif_receive_skb+0x1a6/0x5a0 net/core/dev.c:5648 process_backlog+0x480/0x8b0 net/core/dev.c:5976 __napi_poll+0xe3/0x980 net/core/dev.c:6576 napi_poll net/core/dev.c:6645 [inline] net_rx_action+0x8b8/0x1870 net/core/dev.c:6778 __do_softirq+0x1b7/0x7c5 kernel/softirq.c:553 do_softirq+0x9a/0xf0 kernel/softirq.c:454 __local_bh_enable_ip+0x9b/0xa0 kernel/softirq.c:381 local_bh_enable include/linux/bottom_half.h:33 [inline] rcu_read_unlock_bh include/linux/rcupdate.h:820 [inline] __dev_queue_xmit+0x2768/0x51c0 net/core/dev.c:4378 dev_queue_xmit include/linux/netdevice.h:3171 [inline] packet_xmit+0x9c/0x6b0 net/packet/af_packet.c:276 packet_snd net/packet/af_packet.c:3081 [inline] packet_sendmsg+0x8aef/0x9f10 net/packet/af_packet.c:3113 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg net/socket.c:745 [inline] __sys_sendto+0x735/0xa10 net/socket.c:2191 __do_sys_sendto net/socket.c:2203 [inline] __se_sys_sendto net/socket.c:2199 [inline] __x64_sys_sendto+0x125/0x1c0 net/socket.c:2199 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b Uninit was created at: slab_post_alloc_hook mm/slub.c:3819 [inline] slab_alloc_node mm/slub.c:3860 [inline] kmem_cache_alloc_node+0x5cb/0xbc0 mm/slub.c:3903 kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:560 __alloc_skb+0x352/0x790 net/core/skbuff.c:651 alloc_skb include/linux/skbuff.h:1296 [inline] alloc_skb_with_frags+0xc8/0xbd0 net/core/skbuff.c:6394 sock_alloc_send_pskb+0xa80/0xbf0 net/core/sock.c:2783 packet_alloc_skb net/packet/af_packet.c:2930 [inline] packet_snd net/packet/af_packet.c:3024 [inline] packet_sendmsg+0x70c2/0x9f10 net/packet/af_packet.c:3113 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg net/socket.c:745 [inline] __sys_sendto+0x735/0xa10 net/socket.c:2191 __do_sys_sendto net/socket.c:2203 [inline] __se_sys_sendto net/socket.c:2199 [inline] __x64_sys_sendto+0x125/0x1c0 net/socket.c:2199 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b

In the Linux kernel, the following vulnerability has been resolved: fat: fix uninitialized field in nostale filehandles When fat_encode_fh_nostale() encodes file handle without a parent it stores only first 10 bytes of the file handle. However the length of the file handle must be a multiple of 4 so the file handle is actually 12 bytes long and the last two bytes remain uninitialized. This is not great at we potentially leak uninitialized information with the handle to userspace. Properly initialize the full handle length.

In the Linux kernel, the following vulnerability has been resolved: netlink: Fix kernel-infoleak-after-free in __skb_datagram_iter syzbot reported the following uninit-value access issue [1]: netlink_to_full_skb() creates a new `skb` and puts the `skb->data` passed as a 1st arg of netlink_to_full_skb() onto new `skb`. The data size is specified as `len` and passed to skb_put_data(). This `len` is based on `skb->end` that is not data offset but buffer offset. The `skb->end` contains data and tailroom. Since the tailroom is not initialized when the new `skb` created, KMSAN detects uninitialized memory area when copying the data. This patch resolved this issue by correct the len from `skb->end` to `skb->len`, which is the actual data offset. BUG: KMSAN: kernel-infoleak-after-free in instrument_copy_to_user include/linux/instrumented.h:114 [inline] BUG: KMSAN: kernel-infoleak-after-free in copy_to_user_iter lib/iov_iter.c:24 [inline] BUG: KMSAN: kernel-infoleak-after-free in iterate_ubuf include/linux/iov_iter.h:29 [inline] BUG: KMSAN: kernel-infoleak-after-free in iterate_and_advance2 include/linux/iov_iter.h:245 [inline] BUG: KMSAN: kernel-infoleak-after-free in iterate_and_advance include/linux/iov_iter.h:271 [inline] BUG: KMSAN: kernel-infoleak-after-free in _copy_to_iter+0x364/0x2520 lib/iov_iter.c:186 instrument_copy_to_user include/linux/instrumented.h:114 [inline] copy_to_user_iter lib/iov_iter.c:24 [inline] iterate_ubuf include/linux/iov_iter.h:29 [inline] iterate_and_advance2 include/linux/iov_iter.h:245 [inline] iterate_and_advance include/linux/iov_iter.h:271 [inline] _copy_to_iter+0x364/0x2520 lib/iov_iter.c:186 copy_to_iter include/linux/uio.h:197 [inline] simple_copy_to_iter+0x68/0xa0 net/core/datagram.c:532 __skb_datagram_iter+0x123/0xdc0 net/core/datagram.c:420 skb_copy_datagram_iter+0x5c/0x200 net/core/datagram.c:546 skb_copy_datagram_msg include/linux/skbuff.h:3960 [inline] packet_recvmsg+0xd9c/0x2000 net/packet/af_packet.c:3482 sock_recvmsg_nosec net/socket.c:1044 [inline] sock_recvmsg net/socket.c:1066 [inline] sock_read_iter+0x467/0x580 net/socket.c:1136 call_read_iter include/linux/fs.h:2014 [inline] new_sync_read fs/read_write.c:389 [inline] vfs_read+0x8f6/0xe00 fs/read_write.c:470 ksys_read+0x20f/0x4c0 fs/read_write.c:613 __do_sys_read fs/read_write.c:623 [inline] __se_sys_read fs/read_write.c:621 [inline] __x64_sys_read+0x93/0xd0 fs/read_write.c:621 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x44/0x110 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b Uninit was stored to memory at: skb_put_data include/linux/skbuff.h:2622 [inline] netlink_to_full_skb net/netlink/af_netlink.c:181 [inline] __netlink_deliver_tap_skb net/netlink/af_netlink.c:298 [inline] __netlink_deliver_tap+0x5be/0xc90 net/netlink/af_netlink.c:325 netlink_deliver_tap net/netlink/af_netlink.c:338 [inline] netlink_deliver_tap_kernel net/netlink/af_netlink.c:347 [inline] netlink_unicast_kernel net/netlink/af_netlink.c:1341 [inline] netlink_unicast+0x10f1/0x1250 net/netlink/af_netlink.c:1368 netlink_sendmsg+0x1238/0x13d0 net/netlink/af_netlink.c:1910 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg net/socket.c:745 [inline] ____sys_sendmsg+0x9c2/0xd60 net/socket.c:2584 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2638 __sys_sendmsg net/socket.c:2667 [inline] __do_sys_sendmsg net/socket.c:2676 [inline] __se_sys_sendmsg net/socket.c:2674 [inline] __x64_sys_sendmsg+0x307/0x490 net/socket.c:2674 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x44/0x110 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b Uninit was created at: free_pages_prepare mm/page_alloc.c:1087 [inline] free_unref_page_prepare+0xb0/0xa40 mm/page_alloc.c:2347 free_unref_page_list+0xeb/0x1100 mm/page_alloc.c:2533 release_pages+0x23d3/0x2410 mm/swap.c:1042 free_pages_and_swap_cache+0xd9/0xf0 mm/swap_state.c:316 tlb_batch_pages ---truncated---

In the Linux kernel, the following vulnerability has been resolved: iio: accel: sca3300: fix uninitialized iio scan data Fix potential leak of uninitialized stack data to userspace by ensuring that the `channels` array is zeroed before use.

In the Linux kernel, the following vulnerability has been resolved: ipvs: fix uninit-value for saddr in do_output_route4 syzbot reports for uninit-value for the saddr argument [1]. commit 4754957f04f5 ("ipvs: do not use random local source address for tunnels") already implies that the input value of saddr should be ignored but the code is still reading it which can prevent to connect the route. Fix it by changing the argument to ret_saddr. [1] BUG: KMSAN: uninit-value in do_output_route4+0x42c/0x4d0 net/netfilter/ipvs/ip_vs_xmit.c:147 do_output_route4+0x42c/0x4d0 net/netfilter/ipvs/ip_vs_xmit.c:147 __ip_vs_get_out_rt+0x403/0x21d0 net/netfilter/ipvs/ip_vs_xmit.c:330 ip_vs_tunnel_xmit+0x205/0x2380 net/netfilter/ipvs/ip_vs_xmit.c:1136 ip_vs_in_hook+0x1aa5/0x35b0 net/netfilter/ipvs/ip_vs_core.c:2063 nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline] nf_hook_slow+0xf7/0x400 net/netfilter/core.c:626 nf_hook include/linux/netfilter.h:269 [inline] __ip_local_out+0x758/0x7e0 net/ipv4/ip_output.c:118 ip_local_out net/ipv4/ip_output.c:127 [inline] ip_send_skb+0x6a/0x3c0 net/ipv4/ip_output.c:1501 udp_send_skb+0xfda/0x1b70 net/ipv4/udp.c:1195 udp_sendmsg+0x2fe3/0x33c0 net/ipv4/udp.c:1483 inet_sendmsg+0x1fc/0x280 net/ipv4/af_inet.c:851 sock_sendmsg_nosec net/socket.c:712 [inline] __sock_sendmsg+0x267/0x380 net/socket.c:727 ____sys_sendmsg+0x91b/0xda0 net/socket.c:2566 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2620 __sys_sendmmsg+0x41d/0x880 net/socket.c:2702 __compat_sys_sendmmsg net/compat.c:360 [inline] __do_compat_sys_sendmmsg net/compat.c:367 [inline] __se_compat_sys_sendmmsg net/compat.c:364 [inline] __ia32_compat_sys_sendmmsg+0xc8/0x140 net/compat.c:364 ia32_sys_call+0x3ffa/0x41f0 arch/x86/include/generated/asm/syscalls_32.h:346 do_syscall_32_irqs_on arch/x86/entry/syscall_32.c:83 [inline] __do_fast_syscall_32+0xb0/0x110 arch/x86/entry/syscall_32.c:306 do_fast_syscall_32+0x38/0x80 arch/x86/entry/syscall_32.c:331 do_SYSENTER_32+0x1f/0x30 arch/x86/entry/syscall_32.c:369 entry_SYSENTER_compat_after_hwframe+0x84/0x8e Uninit was created at: slab_post_alloc_hook mm/slub.c:4167 [inline] slab_alloc_node mm/slub.c:4210 [inline] __kmalloc_cache_noprof+0x8fa/0xe00 mm/slub.c:4367 kmalloc_noprof include/linux/slab.h:905 [inline] ip_vs_dest_dst_alloc net/netfilter/ipvs/ip_vs_xmit.c:61 [inline] __ip_vs_get_out_rt+0x35d/0x21d0 net/netfilter/ipvs/ip_vs_xmit.c:323 ip_vs_tunnel_xmit+0x205/0x2380 net/netfilter/ipvs/ip_vs_xmit.c:1136 ip_vs_in_hook+0x1aa5/0x35b0 net/netfilter/ipvs/ip_vs_core.c:2063 nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline] nf_hook_slow+0xf7/0x400 net/netfilter/core.c:626 nf_hook include/linux/netfilter.h:269 [inline] __ip_local_out+0x758/0x7e0 net/ipv4/ip_output.c:118 ip_local_out net/ipv4/ip_output.c:127 [inline] ip_send_skb+0x6a/0x3c0 net/ipv4/ip_output.c:1501 udp_send_skb+0xfda/0x1b70 net/ipv4/udp.c:1195 udp_sendmsg+0x2fe3/0x33c0 net/ipv4/udp.c:1483 inet_sendmsg+0x1fc/0x280 net/ipv4/af_inet.c:851 sock_sendmsg_nosec net/socket.c:712 [inline] __sock_sendmsg+0x267/0x380 net/socket.c:727 ____sys_sendmsg+0x91b/0xda0 net/socket.c:2566 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2620 __sys_sendmmsg+0x41d/0x880 net/socket.c:2702 __compat_sys_sendmmsg net/compat.c:360 [inline] __do_compat_sys_sendmmsg net/compat.c:367 [inline] __se_compat_sys_sendmmsg net/compat.c:364 [inline] __ia32_compat_sys_sendmmsg+0xc8/0x140 net/compat.c:364 ia32_sys_call+0x3ffa/0x41f0 arch/x86/include/generated/asm/syscalls_32.h:346 do_syscall_32_irqs_on arch/x86/entry/syscall_32.c:83 [inline] __do_fast_syscall_32+0xb0/0x110 arch/x86/entry/syscall_32.c:306 do_fast_syscall_32+0x38/0x80 arch/x86/entry/syscall_32.c:331 do_SYSENTER_32+0x1f/0x30 arch/x86/entry/syscall_32.c:369 entry_SYSENTER_compat_after_hwframe+0x84/0x8e CPU: 0 UID: 0 PID: 22408 Comm: syz.4.5165 Not tainted 6.15.0-rc3-syzkaller-00019-gbc3372351d0c #0 PREEMPT(undef) Hardware name: Google Google Compute Engi ---truncated---

In the Linux kernel, the following vulnerability has been resolved: of/fdt: run soc memory setup when early_init_dt_scan_memory fails If memory has been found early_init_dt_scan_memory now returns 1. If it hasn't found any memory it will return 0, allowing other memory setup mechanisms to carry on. Previously early_init_dt_scan_memory always returned 0 without distinguishing between any kind of memory setup being done or not. Any code path after the early_init_dt_scan memory call in the ramips plat_mem_setup code wouldn't be executed anymore. Making early_init_dt_scan_memory the only way to initialize the memory. Some boards, including my mt7621 based Cudy X6 board, depend on memory initialization being done via the soc_info.mem_detect function pointer. Those wouldn't be able to obtain memory and panic the kernel during early bootup with the message "early_init_dt_alloc_memory_arch: Failed to allocate 12416 bytes align=0x40".

In the Linux kernel, the following vulnerability has been resolved: drm/sched: Check scheduler work queue before calling timeout handling During an IGT GPU reset test we see again oops despite of commit 0c8c901aaaebc9 (drm/sched: Check scheduler ready before calling timeout handling). It uses ready condition whether to call drm_sched_fault which unwind the TDR leads to GPU reset. However it looks the ready condition is overloaded with other meanings, for example, for the following stack is related GPU reset : 0 gfx_v9_0_cp_gfx_start 1 gfx_v9_0_cp_gfx_resume 2 gfx_v9_0_cp_resume 3 gfx_v9_0_hw_init 4 gfx_v9_0_resume 5 amdgpu_device_ip_resume_phase2 does the following: /* start the ring */ gfx_v9_0_cp_gfx_start(adev); ring->sched.ready = true; The same approach is for other ASICs as well : gfx_v8_0_cp_gfx_resume gfx_v10_0_kiq_resume, etc... As a result, our GPU reset test causes GPU fault which calls unconditionally gfx_v9_0_fault and then drm_sched_fault. However now it depends on whether the interrupt service routine drm_sched_fault is executed after gfx_v9_0_cp_gfx_start is completed which sets the ready field of the scheduler to true even for uninitialized schedulers and causes oops vs no fault or when ISR drm_sched_fault is completed prior gfx_v9_0_cp_gfx_start and NULL pointer dereference does not occur. Use the field timeout_wq to prevent oops for uninitialized schedulers. The field could be initialized by the work queue of resetting the domain. v1: Corrections to commit message (Luben)

In the Linux kernel, the following vulnerability has been resolved: mm/damon/core: initialize damo_filter->list from damos_new_filter() damos_new_filter() is not initializing the list field of newly allocated filter object. However, DAMON sysfs interface and DAMON_RECLAIM are not initializing it after calling damos_new_filter(). As a result, accessing uninitialized memory is possible. Actually, adding multiple DAMOS filters via DAMON sysfs interface caused NULL pointer dereferencing. Initialize the field just after the allocation from damos_new_filter().

In the Linux kernel, the following vulnerability has been resolved: hsr: Fix uninit-value access in fill_frame_info() Syzbot reports the following uninit-value access problem. ===================================================== BUG: KMSAN: uninit-value in fill_frame_info net/hsr/hsr_forward.c:601 [inline] BUG: KMSAN: uninit-value in hsr_forward_skb+0x9bd/0x30f0 net/hsr/hsr_forward.c:616 fill_frame_info net/hsr/hsr_forward.c:601 [inline] hsr_forward_skb+0x9bd/0x30f0 net/hsr/hsr_forward.c:616 hsr_dev_xmit+0x192/0x330 net/hsr/hsr_device.c:223 __netdev_start_xmit include/linux/netdevice.h:4889 [inline] netdev_start_xmit include/linux/netdevice.h:4903 [inline] xmit_one net/core/dev.c:3544 [inline] dev_hard_start_xmit+0x247/0xa10 net/core/dev.c:3560 __dev_queue_xmit+0x34d0/0x52a0 net/core/dev.c:4340 dev_queue_xmit include/linux/netdevice.h:3082 [inline] packet_xmit+0x9c/0x6b0 net/packet/af_packet.c:276 packet_snd net/packet/af_packet.c:3087 [inline] packet_sendmsg+0x8b1d/0x9f30 net/packet/af_packet.c:3119 sock_sendmsg_nosec net/socket.c:730 [inline] sock_sendmsg net/socket.c:753 [inline] __sys_sendto+0x781/0xa30 net/socket.c:2176 __do_sys_sendto net/socket.c:2188 [inline] __se_sys_sendto net/socket.c:2184 [inline] __ia32_sys_sendto+0x11f/0x1c0 net/socket.c:2184 do_syscall_32_irqs_on arch/x86/entry/common.c:112 [inline] __do_fast_syscall_32+0xa2/0x100 arch/x86/entry/common.c:178 do_fast_syscall_32+0x37/0x80 arch/x86/entry/common.c:203 do_SYSENTER_32+0x1f/0x30 arch/x86/entry/common.c:246 entry_SYSENTER_compat_after_hwframe+0x70/0x82 Uninit was created at: slab_post_alloc_hook+0x12f/0xb70 mm/slab.h:767 slab_alloc_node mm/slub.c:3478 [inline] kmem_cache_alloc_node+0x577/0xa80 mm/slub.c:3523 kmalloc_reserve+0x148/0x470 net/core/skbuff.c:559 __alloc_skb+0x318/0x740 net/core/skbuff.c:644 alloc_skb include/linux/skbuff.h:1286 [inline] alloc_skb_with_frags+0xc8/0xbd0 net/core/skbuff.c:6299 sock_alloc_send_pskb+0xa80/0xbf0 net/core/sock.c:2794 packet_alloc_skb net/packet/af_packet.c:2936 [inline] packet_snd net/packet/af_packet.c:3030 [inline] packet_sendmsg+0x70e8/0x9f30 net/packet/af_packet.c:3119 sock_sendmsg_nosec net/socket.c:730 [inline] sock_sendmsg net/socket.c:753 [inline] __sys_sendto+0x781/0xa30 net/socket.c:2176 __do_sys_sendto net/socket.c:2188 [inline] __se_sys_sendto net/socket.c:2184 [inline] __ia32_sys_sendto+0x11f/0x1c0 net/socket.c:2184 do_syscall_32_irqs_on arch/x86/entry/common.c:112 [inline] __do_fast_syscall_32+0xa2/0x100 arch/x86/entry/common.c:178 do_fast_syscall_32+0x37/0x80 arch/x86/entry/common.c:203 do_SYSENTER_32+0x1f/0x30 arch/x86/entry/common.c:246 entry_SYSENTER_compat_after_hwframe+0x70/0x82 It is because VLAN not yet supported in hsr driver. Return error when protocol is ETH_P_8021Q in fill_frame_info() now to fix it.

In the Linux kernel, the following vulnerability has been resolved: llc: verify mac len before reading mac header LLC reads the mac header with eth_hdr without verifying that the skb has an Ethernet header. Syzbot was able to enter llc_rcv on a tun device. Tun can insert packets without mac len and with user configurable skb->protocol (passing a tun_pi header when not configuring IFF_NO_PI). BUG: KMSAN: uninit-value in llc_station_ac_send_test_r net/llc/llc_station.c:81 [inline] BUG: KMSAN: uninit-value in llc_station_rcv+0x6fb/0x1290 net/llc/llc_station.c:111 llc_station_ac_send_test_r net/llc/llc_station.c:81 [inline] llc_station_rcv+0x6fb/0x1290 net/llc/llc_station.c:111 llc_rcv+0xc5d/0x14a0 net/llc/llc_input.c:218 __netif_receive_skb_one_core net/core/dev.c:5523 [inline] __netif_receive_skb+0x1a6/0x5a0 net/core/dev.c:5637 netif_receive_skb_internal net/core/dev.c:5723 [inline] netif_receive_skb+0x58/0x660 net/core/dev.c:5782 tun_rx_batched+0x3ee/0x980 drivers/net/tun.c:1555 tun_get_user+0x54c5/0x69c0 drivers/net/tun.c:2002 Add a mac_len test before all three eth_hdr(skb) calls under net/llc. There are further uses in include/net/llc_pdu.h. All these are protected by a test skb->protocol == ETH_P_802_2. Which does not protect against this tun scenario. But the mac_len test added in this patch in llc_fixup_skb will indirectly protect those too. That is called from llc_rcv before any other LLC code. It is tempting to just add a blanket mac_len check in llc_rcv, but not sure whether that could break valid LLC paths that do not assume an Ethernet header. 802.2 LLC may be used on top of non-802.3 protocols in principle. The below referenced commit shows that used to, on top of Token Ring. At least one of the three eth_hdr uses goes back to before the start of git history. But the one that syzbot exercises is introduced in this commit. That commit is old enough (2008), that effectively all stable kernels should receive this.

In the Linux kernel, the following vulnerability has been resolved: nfc: pn533: initialize struct pn533_out_arg properly struct pn533_out_arg used as a temporary context for out_urb is not initialized properly. Its uninitialized 'phy' field can be dereferenced in error cases inside pn533_out_complete() callback function. It causes the following failure: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 6.2.0-rc3-next-20230110-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022 RIP: 0010:pn533_out_complete.cold+0x15/0x44 drivers/nfc/pn533/usb.c:441 Call Trace: <IRQ> __usb_hcd_giveback_urb+0x2b6/0x5c0 drivers/usb/core/hcd.c:1671 usb_hcd_giveback_urb+0x384/0x430 drivers/usb/core/hcd.c:1754 dummy_timer+0x1203/0x32d0 drivers/usb/gadget/udc/dummy_hcd.c:1988 call_timer_fn+0x1da/0x800 kernel/time/timer.c:1700 expire_timers+0x234/0x330 kernel/time/timer.c:1751 __run_timers kernel/time/timer.c:2022 [inline] __run_timers kernel/time/timer.c:1995 [inline] run_timer_softirq+0x326/0x910 kernel/time/timer.c:2035 __do_softirq+0x1fb/0xaf6 kernel/softirq.c:571 invoke_softirq kernel/softirq.c:445 [inline] __irq_exit_rcu+0x123/0x180 kernel/softirq.c:650 irq_exit_rcu+0x9/0x20 kernel/softirq.c:662 sysvec_apic_timer_interrupt+0x97/0xc0 arch/x86/kernel/apic/apic.c:1107 Initialize the field with the pn533_usb_phy currently used. Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

In the Linux kernel, the following vulnerability has been resolved: udf: Fix uninitialized array access for some pathnames For filenames that begin with . and are between 2 and 5 characters long, UDF charset conversion code would read uninitialized memory in the output buffer. The only practical impact is that the name may be prepended a "unification hash" when it is not actually needed but still it is good to fix this.

In the Linux kernel, the following vulnerability has been resolved: net/usb: kalmia: Don't pass act_len in usb_bulk_msg error path syzbot reported that act_len in kalmia_send_init_packet() is uninitialized when passing it to the first usb_bulk_msg error path. Jiri Pirko noted that it's pointless to pass it in the error path, and that the value that would be printed in the second error path would be the value of act_len from the first call to usb_bulk_msg.[1] With this in mind, let's just not pass act_len to the usb_bulk_msg error paths. 1: https://lore.kernel.org/lkml/Y9pY61y1nwTuzMOa@nanopsycho/

In the Linux kernel, the following vulnerability has been resolved: cxl/region: Do not try to cleanup after cxl_region_setup_targets() fails Commit 5e42bcbc3fef ("cxl/region: decrement ->nr_targets on error in cxl_region_attach()") tried to avoid 'eiw' initialization errors when ->nr_targets exceeded 16, by just decrementing ->nr_targets when cxl_region_setup_targets() failed. Commit 86987c766276 ("cxl/region: Cleanup target list on attach error") extended that cleanup to also clear cxled->pos and p->targets[pos]. The initialization error was incidentally fixed separately by: Commit 8d4285425714 ("cxl/region: Fix port setup uninitialized variable warnings") which was merged a few days after 5e42bcbc3fef. But now the original cleanup when cxl_region_setup_targets() fails prevents endpoint and switch decoder resources from being reused: 1) the cleanup does not set the decoder's region to NULL, which results in future dpa_size_store() calls returning -EBUSY 2) the decoder is not properly freed, which results in future commit errors associated with the upstream switch Now that the initialization errors were fixed separately, the proper cleanup for this case is to just return immediately. Then the resources associated with this target get cleanup up as normal when the failed region is deleted. The ->nr_targets decrement in the error case also helped prevent a p->targets[] array overflow, so add a new check to prevent against that overflow. Tested by trying to create an invalid region for a 2 switch * 2 endpoint topology, and then following up with creating a valid region.

In the Linux kernel, the following vulnerability has been resolved: net: rtnetlink: zero ifla_vf_broadcast to avoid stack infoleak in rtnl_fill_vfinfo rtnl_fill_vfinfo() declares struct ifla_vf_broadcast on the stack without initialisation: struct ifla_vf_broadcast vf_broadcast; The struct contains a single fixed 32-byte field: /* include/uapi/linux/if_link.h */ struct ifla_vf_broadcast { __u8 broadcast[32]; }; The function then copies dev->broadcast into it using dev->addr_len as the length: memcpy(vf_broadcast.broadcast, dev->broadcast, dev->addr_len); On Ethernet devices (the overwhelming majority of SR-IOV NICs) dev->addr_len is 6, so only the first 6 bytes of broadcast[] are written. The remaining 26 bytes retain whatever was previously on the kernel stack. The full struct is then handed to userspace via: nla_put(skb, IFLA_VF_BROADCAST, sizeof(vf_broadcast), &vf_broadcast) leaking up to 26 bytes of uninitialised kernel stack per VF per RTM_GETLINK request, repeatable. The other vf_* structs in the same function are explicitly zeroed for exactly this reason - see the memset() calls for ivi, vf_vlan_info, node_guid and port_guid a few lines above. vf_broadcast was simply missed when it was added. Reachability: any unprivileged local process can open AF_NETLINK / NETLINK_ROUTE without capabilities and send RTM_GETLINK with an IFLA_EXT_MASK attribute carrying RTEXT_FILTER_VF. The kernel walks each VF and emits IFLA_VF_BROADCAST, leaking 26 bytes of stack per VF per request. Stack residue at this call site can include return addresses and transient sensitive data; KASAN with stack instrumentation, or KMSAN, will flag the nla_put() when reproduced. Zero the on-stack struct before the partial memcpy, matching the existing pattern used for the other vf_* structs in the same function.

In the Linux kernel, the following vulnerability has been resolved: smb: client: use kzalloc to zero-initialize security descriptor buffer Commit 62e7dd0a39c2d ("smb: common: change the data type of num_aces to le16") split struct smb_acl's __le32 num_aces field into __le16 num_aces and __le16 reserved. The reserved field corresponds to Sbz2 in the MS-DTYP ACL wire format, which must be zero [1]. When building an ACL descriptor in build_sec_desc(), we are using a kmalloc()'ed descriptor buffer and writing the fields explicitly using le16() writes now. This never writes to the 2 byte reserved field, leaving it as uninitialized heap data. When the reserved field happens to contain non-zero slab garbage, Samba rejects the security descriptor with "ndr_pull_security_descriptor failed: Range Error", causing chmod to fail with EINVAL. Change kmalloc() to kzalloc() to ensure the entire buffer is zero-initialized. [1] https://learn.microsoft.com/en-us/openspecs/windows_protocols/ms-dtyp/20233ed8-a6c6-4097-aafa-dd545ed24428

In the Linux kernel, the following vulnerability has been resolved: usb: usblp: fix uninitialized heap leak via LPGETSTATUS ioctl Just like in a previous problem in this driver, usblp_ctrl_msg() will collapse the usb_control_msg() return value to 0/-errno, discarding the actual number of bytes transferred. Ideally that short command should be detected and error out, but many printers are known to send "incorrect" responses back so we can't just do that. statusbuf is kmalloc(8) at probe time and never filled before the first LPGETSTATUS ioctl. usblp_read_status() requests 1 byte. If a malicious printer responds with zero bytes, *statusbuf is one byte of stale kmalloc heap, sign-extended into the local int status, which the LPGETSTATUS path then copy_to_user()s directly to the ioctl caller. Fix this all by just zapping out the memory buffer when allocated at probe time. If a later call does a short read, the data will be identical to what the device sent it the last time, so there is no "leak" of information happening.

In the Linux kernel, the following vulnerability has been resolved: hfsplus: fix uninit-value by validating catalog record size Syzbot reported a KMSAN uninit-value issue in hfsplus_strcasecmp(). The root cause is that hfs_brec_read() doesn't validate that the on-disk record size matches the expected size for the record type being read. When mounting a corrupted filesystem, hfs_brec_read() may read less data than expected. For example, when reading a catalog thread record, the debug output showed: HFSPLUS_BREC_READ: rec_len=520, fd->entrylength=26 HFSPLUS_BREC_READ: WARNING - entrylength (26) < rec_len (520) - PARTIAL READ! hfs_brec_read() only validates that entrylength is not greater than the buffer size, but doesn't check if it's less than expected. It successfully reads 26 bytes into a 520-byte structure and returns success, leaving 494 bytes uninitialized. This uninitialized data in tmp.thread.nodeName then gets copied by hfsplus_cat_build_key_uni() and used by hfsplus_strcasecmp(), triggering the KMSAN warning when the uninitialized bytes are used as array indices in case_fold(). Fix by introducing hfsplus_brec_read_cat() wrapper that: 1. Calls hfs_brec_read() to read the data 2. Validates the record size based on the type field: - Fixed size for folder and file records - Variable size for thread records (depends on string length) 3. Returns -EIO if size doesn't match expected For thread records, check against HFSPLUS_MIN_THREAD_SZ before reading nodeName.length to avoid reading uninitialized data at call sites that don't zero-initialize the entry structure. Also initialize the tmp variable in hfsplus_find_cat() as defensive programming to ensure no uninitialized data even if validation is bypassed.

In the Linux kernel, the following vulnerability has been resolved: clocksource/drivers/timer-sp804: Fix an Oops when read_current_timer is called on ARM32 platforms where the SP804 is not registered as the sched_clock. On SP804, the delay timer shares the same clkevt instance with sched_clock. On some platforms, when sp804_clocksource_and_sched_clock_init is called with use_sched_clock not set to 1, sched_clkevt is not properly initialized. However, sp804_register_delay_timer is invoked unconditionally, and read_current_timer() subsequently calls sp804_read on an uninitialized sched_clkevt, leading to a kernel Oops when accessing sched_clkevt->value. Declare a dedicated clkevt instance exclusively for delay timer, instead of sharing the same clkevt with sched_clock. This ensures that read_current_timer continues to work correctly regardless of whether SP804 is selected as the sched_clock.

In the Linux kernel, the following vulnerability has been resolved: ext4: move ext4_percpu_param_init() before ext4_mb_init() When running `kvm-xfstests -c ext4/1k -C 1 generic/383` with the `DOUBLE_CHECK` macro defined, the following panic is triggered: ================================================================== EXT4-fs error (device vdc): ext4_validate_block_bitmap:423: comm mount: bg 0: bad block bitmap checksum BUG: unable to handle page fault for address: ff110000fa2cc000 PGD 3e01067 P4D 3e02067 PUD 0 Oops: Oops: 0000 [#1] SMP NOPTI CPU: 0 UID: 0 PID: 2386 Comm: mount Tainted: G W 6.18.0-gba65a4e7120a-dirty #1152 PREEMPT(none) RIP: 0010:percpu_counter_add_batch+0x13/0xa0 Call Trace: <TASK> ext4_mark_group_bitmap_corrupted+0xcb/0xe0 ext4_validate_block_bitmap+0x2a1/0x2f0 ext4_read_block_bitmap+0x33/0x50 mb_group_bb_bitmap_alloc+0x33/0x80 ext4_mb_add_groupinfo+0x190/0x250 ext4_mb_init_backend+0x87/0x290 ext4_mb_init+0x456/0x640 __ext4_fill_super+0x1072/0x1680 ext4_fill_super+0xd3/0x280 get_tree_bdev_flags+0x132/0x1d0 vfs_get_tree+0x29/0xd0 vfs_cmd_create+0x59/0xe0 __do_sys_fsconfig+0x4f6/0x6b0 do_syscall_64+0x50/0x1f0 entry_SYSCALL_64_after_hwframe+0x76/0x7e ================================================================== This issue can be reproduced using the following commands: mkfs.ext4 -F -q -b 1024 /dev/sda 5G tune2fs -O quota,project /dev/sda mount /dev/sda /tmp/test With DOUBLE_CHECK defined, mb_group_bb_bitmap_alloc() reads and validates the block bitmap. When the validation fails, ext4_mark_group_bitmap_corrupted() attempts to update sbi->s_freeclusters_counter. However, this percpu_counter has not been initialized yet at this point, which leads to the panic described above. Fix this by moving the execution of ext4_percpu_param_init() to occur before ext4_mb_init(), ensuring the per-CPU counters are initialized before they are used.

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix bpf_xdp_store_bytes proto for read-only arg While making some maps in Cilium read-only from the BPF side, we noticed that the bpf_xdp_store_bytes proto is incorrect. In particular, the verifier was throwing the following error: ; ret = ctx_store_bytes(ctx, l3_off + offsetof(struct iphdr, saddr), &nat->address, 4, 0); 635: (79) r1 = *(u64 *)(r10 -144) ; R1=ctx() R10=fp0 fp-144=ctx() 636: (b4) w2 = 26 ; R2=26 637: (b4) w4 = 4 ; R4=4 638: (b4) w5 = 0 ; R5=0 639: (85) call bpf_xdp_store_bytes#190 write into map forbidden, value_size=6 off=0 size=4 nat comes from a BPF_F_RDONLY_PROG map, so R3 is a PTR_TO_MAP_VALUE. The verifier checks the helper's memory access to R3 in check_mem_size_reg, as it reaches ARG_CONST_SIZE argument. The third argument has expected type ARG_PTR_TO_UNINIT_MEM, which includes the MEM_WRITE flag. The verifier thus checks for a BPF_WRITE access on R3. Given R3 points to a read-only map, the check fails. Conversely, ARG_PTR_TO_UNINIT_MEM can also lead to the helper reading from uninitialized memory. This patch simply fixes the expected argument type to match that of bpf_skb_store_bytes.

In the Linux kernel, the following vulnerability has been resolved: unshare: fix unshare_fs() handling There's an unpleasant corner case in unshare(2), when we have a CLONE_NEWNS in flags and current->fs hadn't been shared at all; in that case copy_mnt_ns() gets passed current->fs instead of a private copy, which causes interesting warts in proof of correctness] > I guess if private means fs->users == 1, the condition could still be true. Unfortunately, it's worse than just a convoluted proof of correctness. Consider the case when we have CLONE_NEWCGROUP in addition to CLONE_NEWNS (and current->fs->users == 1). We pass current->fs to copy_mnt_ns(), all right. Suppose it succeeds and flips current->fs->{pwd,root} to corresponding locations in the new namespace. Now we proceed to copy_cgroup_ns(), which fails (e.g. with -ENOMEM). We call put_mnt_ns() on the namespace created by copy_mnt_ns(), it's destroyed and its mount tree is dissolved, but... current->fs->root and current->fs->pwd are both left pointing to now detached mounts. They are pinning those, so it's not a UAF, but it leaves the calling process with unshare(2) failing with -ENOMEM _and_ leaving it with pwd and root on detached isolated mounts. The last part is clearly a bug. There is other fun related to that mess (races with pivot_root(), including the one between pivot_root() and fork(), of all things), but this one is easy to isolate and fix - treat CLONE_NEWNS as "allocate a new fs_struct even if it hadn't been shared in the first place". Sure, we could go for something like "if both CLONE_NEWNS *and* one of the things that might end up failing after copy_mnt_ns() call in create_new_namespaces() are set, force allocation of new fs_struct", but let's keep it simple - the cost of copy_fs_struct() is trivial. Another benefit is that copy_mnt_ns() with CLONE_NEWNS *always* gets a freshly allocated fs_struct, yet to be attached to anything. That seriously simplifies the analysis... FWIW, that bug had been there since the introduction of unshare(2) ;-/

In the Linux kernel, the following vulnerability has been resolved: fs: init flags_valid before calling vfs_fileattr_get syzbot reported a uninit-value bug in [1]. Similar to the "*get" context where the kernel's internal file_kattr structure is initialized before calling vfs_fileattr_get(), we should use the same mechanism when using fa. [1] BUG: KMSAN: uninit-value in fuse_fileattr_get+0xeb4/0x1450 fs/fuse/ioctl.c:517 fuse_fileattr_get+0xeb4/0x1450 fs/fuse/ioctl.c:517 vfs_fileattr_get fs/file_attr.c:94 [inline] __do_sys_file_getattr fs/file_attr.c:416 [inline] Local variable fa.i created at: __do_sys_file_getattr fs/file_attr.c:380 [inline] __se_sys_file_getattr+0x8c/0xbd0 fs/file_attr.c:372

In the Linux kernel, the following vulnerability has been resolved: net: sched: cls_api: fix tc_chain_fill_node to initialize tcm_info to zero to prevent an info-leak When building netlink messages, tc_chain_fill_node() never initializes the tcm_info field of struct tcmsg. Since the allocation is not zeroed, kernel heap memory is leaked to userspace through this 4-byte field. The fix simply zeroes tcm_info alongside the other fields that are already initialized.

In the Linux kernel, the following vulnerability has been resolved: net: use skb_header_pointer() for TCPv4 GSO frag_off check Syzbot reported a KMSAN uninit-value warning in gso_features_check() called from netif_skb_features() [1]. gso_features_check() reads iph->frag_off to decide whether to clear mangleid_features. Accessing the IPv4 header via ip_hdr()/inner_ip_hdr() can rely on skb header offsets that are not always safe for direct dereference on packets injected from PF_PACKET paths. Use skb_header_pointer() for the TCPv4 frag_off check so the header read is robust whether data is already linear or needs copying. [1] https://syzkaller.appspot.com/bug?extid=1543a7d954d9c6d00407

In the Linux kernel, the following vulnerability has been resolved: mfd: macsmc: Initialize mutex Initialize struct apple_smc's mutex in apple_smc_probe(). Using the mutex uninitialized surprisingly resulted only in occasional NULL pointer dereferences in apple_smc_read() calls from the probe() functions of sub devices.

In the Linux kernel, the following vulnerability has been resolved: ipmi: ipmb: initialise event handler read bytes IPMB doesn't use i2c reads, but the handler needs to set a value. Otherwise an i2c read will return an uninitialised value from the bus driver.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nfnetlink_queue: Initialize ctx to avoid memory allocation error It is possible that ctx in nfqnl_build_packet_message() could be used before it is properly initialize, which is only initialized by nfqnl_get_sk_secctx(). This patch corrects this problem by initializing the lsmctx to a safe value when it is declared. This is similar to the commit 35fcac7a7c25 ("audit: Initialize lsmctx to avoid memory allocation error").

In the Linux kernel, the following vulnerability has been resolved: net: zero-initialize tc skb extension on allocation Function skb_ext_add() doesn't initialize created skb extension with any value and leaves it up to the user. However, since extension of type TC_SKB_EXT originally contained only single value tc_skb_ext->chain its users used to just assign the chain value without setting whole extension memory to zero first. This assumption changed when TC_SKB_EXT extension was extended with additional fields but not all users were updated to initialize the new fields which leads to use of uninitialized memory afterwards. UBSAN log: [ 778.299821] UBSAN: invalid-load in net/openvswitch/flow.c:899:28 [ 778.301495] load of value 107 is not a valid value for type '_Bool' [ 778.303215] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.12.0-rc7+ #2 [ 778.304933] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 778.307901] Call Trace: [ 778.308680] <IRQ> [ 778.309358] dump_stack+0xbb/0x107 [ 778.310307] ubsan_epilogue+0x5/0x40 [ 778.311167] __ubsan_handle_load_invalid_value.cold+0x43/0x48 [ 778.312454] ? memset+0x20/0x40 [ 778.313230] ovs_flow_key_extract.cold+0xf/0x14 [openvswitch] [ 778.314532] ovs_vport_receive+0x19e/0x2e0 [openvswitch] [ 778.315749] ? ovs_vport_find_upcall_portid+0x330/0x330 [openvswitch] [ 778.317188] ? create_prof_cpu_mask+0x20/0x20 [ 778.318220] ? arch_stack_walk+0x82/0xf0 [ 778.319153] ? secondary_startup_64_no_verify+0xb0/0xbb [ 778.320399] ? stack_trace_save+0x91/0xc0 [ 778.321362] ? stack_trace_consume_entry+0x160/0x160 [ 778.322517] ? lock_release+0x52e/0x760 [ 778.323444] netdev_frame_hook+0x323/0x610 [openvswitch] [ 778.324668] ? ovs_netdev_get_vport+0xe0/0xe0 [openvswitch] [ 778.325950] __netif_receive_skb_core+0x771/0x2db0 [ 778.327067] ? lock_downgrade+0x6e0/0x6f0 [ 778.328021] ? lock_acquire+0x565/0x720 [ 778.328940] ? generic_xdp_tx+0x4f0/0x4f0 [ 778.329902] ? inet_gro_receive+0x2a7/0x10a0 [ 778.330914] ? lock_downgrade+0x6f0/0x6f0 [ 778.331867] ? udp4_gro_receive+0x4c4/0x13e0 [ 778.332876] ? lock_release+0x52e/0x760 [ 778.333808] ? dev_gro_receive+0xcc8/0x2380 [ 778.334810] ? lock_downgrade+0x6f0/0x6f0 [ 778.335769] __netif_receive_skb_list_core+0x295/0x820 [ 778.336955] ? process_backlog+0x780/0x780 [ 778.337941] ? mlx5e_rep_tc_netdevice_event_unregister+0x20/0x20 [mlx5_core] [ 778.339613] ? seqcount_lockdep_reader_access.constprop.0+0xa7/0xc0 [ 778.341033] ? kvm_clock_get_cycles+0x14/0x20 [ 778.342072] netif_receive_skb_list_internal+0x5f5/0xcb0 [ 778.343288] ? __kasan_kmalloc+0x7a/0x90 [ 778.344234] ? mlx5e_handle_rx_cqe_mpwrq+0x9e0/0x9e0 [mlx5_core] [ 778.345676] ? mlx5e_xmit_xdp_frame_mpwqe+0x14d0/0x14d0 [mlx5_core] [ 778.347140] ? __netif_receive_skb_list_core+0x820/0x820 [ 778.348351] ? mlx5e_post_rx_mpwqes+0xa6/0x25d0 [mlx5_core] [ 778.349688] ? napi_gro_flush+0x26c/0x3c0 [ 778.350641] napi_complete_done+0x188/0x6b0 [ 778.351627] mlx5e_napi_poll+0x373/0x1b80 [mlx5_core] [ 778.352853] __napi_poll+0x9f/0x510 [ 778.353704] ? mlx5_flow_namespace_set_mode+0x260/0x260 [mlx5_core] [ 778.355158] net_rx_action+0x34c/0xa40 [ 778.356060] ? napi_threaded_poll+0x3d0/0x3d0 [ 778.357083] ? sched_clock_cpu+0x18/0x190 [ 778.358041] ? __common_interrupt+0x8e/0x1a0 [ 778.359045] __do_softirq+0x1ce/0x984 [ 778.359938] __irq_exit_rcu+0x137/0x1d0 [ 778.360865] irq_exit_rcu+0xa/0x20 [ 778.361708] common_interrupt+0x80/0xa0 [ 778.362640] </IRQ> [ 778.363212] asm_common_interrupt+0x1e/0x40 [ 778.364204] RIP: 0010:native_safe_halt+0xe/0x10 [ 778.365273] Code: 4f ff ff ff 4c 89 e7 e8 50 3f 40 fe e9 dc fe ff ff 48 89 df e8 43 3f 40 fe eb 90 cc e9 07 00 00 00 0f 00 2d 74 05 62 00 fb f4 <c3> 90 e9 07 00 00 00 0f 00 2d 64 05 62 00 f4 c3 cc cc 0f 1f 44 00 [ 778.369355] RSP: 0018:ffffffff84407e48 EFLAGS: 00000246 [ 778.370570] RAX ---truncated---

In the Linux kernel, the following vulnerability has been resolved: drm/radeon: fix uninitialized size issue in radeon_vce_cs_parse() On the off chance that command stream passed from userspace via ioctl() call to radeon_vce_cs_parse() is weirdly crafted and first command to execute is to encode (case 0x03000001), the function in question will attempt to call radeon_vce_cs_reloc() with size argument that has not been properly initialized. Specifically, 'size' will point to 'tmp' variable before the latter had a chance to be assigned any value. Play it safe and init 'tmp' with 0, thus ensuring that radeon_vce_cs_reloc() will catch an early error in cases like these. Found by Linux Verification Center (linuxtesting.org) with static analysis tool SVACE. (cherry picked from commit 2d52de55f9ee7aaee0e09ac443f77855989c6b68)

In the Linux kernel, the following vulnerability has been resolved: mptcp: consolidate suboption status MPTCP maintains the received sub-options status is the bitmask carrying the received suboptions and in several bitfields carrying per suboption additional info. Zeroing the bitmask before parsing is not enough to ensure a consistent status, and the MPTCP code has to additionally clear some bitfiled depending on the actually parsed suboption. The above schema is fragile, and syzbot managed to trigger a path where a relevant bitfield is not cleared/initialized: BUG: KMSAN: uninit-value in __mptcp_expand_seq net/mptcp/options.c:1030 [inline] BUG: KMSAN: uninit-value in mptcp_expand_seq net/mptcp/protocol.h:864 [inline] BUG: KMSAN: uninit-value in ack_update_msk net/mptcp/options.c:1060 [inline] BUG: KMSAN: uninit-value in mptcp_incoming_options+0x2036/0x3d30 net/mptcp/options.c:1209 __mptcp_expand_seq net/mptcp/options.c:1030 [inline] mptcp_expand_seq net/mptcp/protocol.h:864 [inline] ack_update_msk net/mptcp/options.c:1060 [inline] mptcp_incoming_options+0x2036/0x3d30 net/mptcp/options.c:1209 tcp_data_queue+0xb4/0x7be0 net/ipv4/tcp_input.c:5233 tcp_rcv_established+0x1061/0x2510 net/ipv4/tcp_input.c:6264 tcp_v4_do_rcv+0x7f3/0x11a0 net/ipv4/tcp_ipv4.c:1916 tcp_v4_rcv+0x51df/0x5750 net/ipv4/tcp_ipv4.c:2351 ip_protocol_deliver_rcu+0x2a3/0x13d0 net/ipv4/ip_input.c:205 ip_local_deliver_finish+0x336/0x500 net/ipv4/ip_input.c:233 NF_HOOK include/linux/netfilter.h:314 [inline] ip_local_deliver+0x21f/0x490 net/ipv4/ip_input.c:254 dst_input include/net/dst.h:460 [inline] ip_rcv_finish+0x4a2/0x520 net/ipv4/ip_input.c:447 NF_HOOK include/linux/netfilter.h:314 [inline] ip_rcv+0xcd/0x380 net/ipv4/ip_input.c:567 __netif_receive_skb_one_core net/core/dev.c:5704 [inline] __netif_receive_skb+0x319/0xa00 net/core/dev.c:5817 process_backlog+0x4ad/0xa50 net/core/dev.c:6149 __napi_poll+0xe7/0x980 net/core/dev.c:6902 napi_poll net/core/dev.c:6971 [inline] net_rx_action+0xa5a/0x19b0 net/core/dev.c:7093 handle_softirqs+0x1a0/0x7c0 kernel/softirq.c:561 __do_softirq+0x14/0x1a kernel/softirq.c:595 do_softirq+0x9a/0x100 kernel/softirq.c:462 __local_bh_enable_ip+0x9f/0xb0 kernel/softirq.c:389 local_bh_enable include/linux/bottom_half.h:33 [inline] rcu_read_unlock_bh include/linux/rcupdate.h:919 [inline] __dev_queue_xmit+0x2758/0x57d0 net/core/dev.c:4493 dev_queue_xmit include/linux/netdevice.h:3168 [inline] neigh_hh_output include/net/neighbour.h:523 [inline] neigh_output include/net/neighbour.h:537 [inline] ip_finish_output2+0x187c/0x1b70 net/ipv4/ip_output.c:236 __ip_finish_output+0x287/0x810 ip_finish_output+0x4b/0x600 net/ipv4/ip_output.c:324 NF_HOOK_COND include/linux/netfilter.h:303 [inline] ip_output+0x15f/0x3f0 net/ipv4/ip_output.c:434 dst_output include/net/dst.h:450 [inline] ip_local_out net/ipv4/ip_output.c:130 [inline] __ip_queue_xmit+0x1f2a/0x20d0 net/ipv4/ip_output.c:536 ip_queue_xmit+0x60/0x80 net/ipv4/ip_output.c:550 __tcp_transmit_skb+0x3cea/0x4900 net/ipv4/tcp_output.c:1468 tcp_transmit_skb net/ipv4/tcp_output.c:1486 [inline] tcp_write_xmit+0x3b90/0x9070 net/ipv4/tcp_output.c:2829 __tcp_push_pending_frames+0xc4/0x380 net/ipv4/tcp_output.c:3012 tcp_send_fin+0x9f6/0xf50 net/ipv4/tcp_output.c:3618 __tcp_close+0x140c/0x1550 net/ipv4/tcp.c:3130 __mptcp_close_ssk+0x74e/0x16f0 net/mptcp/protocol.c:2496 mptcp_close_ssk+0x26b/0x2c0 net/mptcp/protocol.c:2550 mptcp_pm_nl_rm_addr_or_subflow+0x635/0xd10 net/mptcp/pm_netlink.c:889 mptcp_pm_nl_rm_subflow_received net/mptcp/pm_netlink.c:924 [inline] mptcp_pm_flush_addrs_and_subflows net/mptcp/pm_netlink.c:1688 [inline] mptcp_nl_flush_addrs_list net/mptcp/pm_netlink.c:1709 [inline] mptcp_pm_nl_flush_addrs_doit+0xe10/0x1630 net/mptcp/pm_netlink.c:1750 genl_family_rcv_msg_doit net/netlink/genetlink.c:1115 [inline] ---truncated---

In the Linux kernel, the following vulnerability has been resolved: powerpc/fadump: Move fadump_cma_init to setup_arch() after initmem_init() During early init CMA_MIN_ALIGNMENT_BYTES can be PAGE_SIZE, since pageblock_order is still zero and it gets initialized later during initmem_init() e.g. setup_arch() -> initmem_init() -> sparse_init() -> set_pageblock_order() One such use case where this causes issue is - early_setup() -> early_init_devtree() -> fadump_reserve_mem() -> fadump_cma_init() This causes CMA memory alignment check to be bypassed in cma_init_reserved_mem(). Then later cma_activate_area() can hit a VM_BUG_ON_PAGE(pfn & ((1 << order) - 1)) if the reserved memory area was not pageblock_order aligned. Fix it by moving the fadump_cma_init() after initmem_init(), where other such cma reservations also gets called. <stack trace> ============== page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x10010 flags: 0x13ffff800000000(node=1|zone=0|lastcpupid=0x7ffff) CMA raw: 013ffff800000000 5deadbeef0000100 5deadbeef0000122 0000000000000000 raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: VM_BUG_ON_PAGE(pfn & ((1 << order) - 1)) ------------[ cut here ]------------ kernel BUG at mm/page_alloc.c:778! Call Trace: __free_one_page+0x57c/0x7b0 (unreliable) free_pcppages_bulk+0x1a8/0x2c8 free_unref_page_commit+0x3d4/0x4e4 free_unref_page+0x458/0x6d0 init_cma_reserved_pageblock+0x114/0x198 cma_init_reserved_areas+0x270/0x3e0 do_one_initcall+0x80/0x2f8 kernel_init_freeable+0x33c/0x530 kernel_init+0x34/0x26c ret_from_kernel_user_thread+0x14/0x1c

In the Linux kernel, the following vulnerability has been resolved: net: hsr: avoid potential out-of-bound access in fill_frame_info() syzbot is able to feed a packet with 14 bytes, pretending it is a vlan one. Since fill_frame_info() is relying on skb->mac_len already, extend the check to cover this case. BUG: KMSAN: uninit-value in fill_frame_info net/hsr/hsr_forward.c:709 [inline] BUG: KMSAN: uninit-value in hsr_forward_skb+0x9ee/0x3b10 net/hsr/hsr_forward.c:724 fill_frame_info net/hsr/hsr_forward.c:709 [inline] hsr_forward_skb+0x9ee/0x3b10 net/hsr/hsr_forward.c:724 hsr_dev_xmit+0x2f0/0x350 net/hsr/hsr_device.c:235 __netdev_start_xmit include/linux/netdevice.h:5002 [inline] netdev_start_xmit include/linux/netdevice.h:5011 [inline] xmit_one net/core/dev.c:3590 [inline] dev_hard_start_xmit+0x247/0xa20 net/core/dev.c:3606 __dev_queue_xmit+0x366a/0x57d0 net/core/dev.c:4434 dev_queue_xmit include/linux/netdevice.h:3168 [inline] packet_xmit+0x9c/0x6c0 net/packet/af_packet.c:276 packet_snd net/packet/af_packet.c:3146 [inline] packet_sendmsg+0x91ae/0xa6f0 net/packet/af_packet.c:3178 sock_sendmsg_nosec net/socket.c:711 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:726 __sys_sendto+0x594/0x750 net/socket.c:2197 __do_sys_sendto net/socket.c:2204 [inline] __se_sys_sendto net/socket.c:2200 [inline] __x64_sys_sendto+0x125/0x1d0 net/socket.c:2200 x64_sys_call+0x346a/0x3c30 arch/x86/include/generated/asm/syscalls_64.h:45 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Uninit was created at: slab_post_alloc_hook mm/slub.c:4091 [inline] slab_alloc_node mm/slub.c:4134 [inline] kmem_cache_alloc_node_noprof+0x6bf/0xb80 mm/slub.c:4186 kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:587 __alloc_skb+0x363/0x7b0 net/core/skbuff.c:678 alloc_skb include/linux/skbuff.h:1323 [inline] alloc_skb_with_frags+0xc8/0xd00 net/core/skbuff.c:6612 sock_alloc_send_pskb+0xa81/0xbf0 net/core/sock.c:2881 packet_alloc_skb net/packet/af_packet.c:2995 [inline] packet_snd net/packet/af_packet.c:3089 [inline] packet_sendmsg+0x74c6/0xa6f0 net/packet/af_packet.c:3178 sock_sendmsg_nosec net/socket.c:711 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:726 __sys_sendto+0x594/0x750 net/socket.c:2197 __do_sys_sendto net/socket.c:2204 [inline] __se_sys_sendto net/socket.c:2200 [inline] __x64_sys_sendto+0x125/0x1d0 net/socket.c:2200 x64_sys_call+0x346a/0x3c30 arch/x86/include/generated/asm/syscalls_64.h:45 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f

In the Linux kernel, the following vulnerability has been resolved: gpu: host1x: Fix a use of uninitialized mutex commit c8347f915e67 ("gpu: host1x: Fix boot regression for Tegra") caused a use of uninitialized mutex leading to below warning when CONFIG_DEBUG_MUTEXES and CONFIG_DEBUG_LOCK_ALLOC are enabled. [ 41.662843] ------------[ cut here ]------------ [ 41.663012] DEBUG_LOCKS_WARN_ON(lock->magic != lock) [ 41.663035] WARNING: CPU: 4 PID: 794 at kernel/locking/mutex.c:587 __mutex_lock+0x670/0x878 [ 41.663458] Modules linked in: rtw88_8822c(+) bluetooth(+) rtw88_pci rtw88_core mac80211 aquantia libarc4 crc_itu_t cfg80211 tegra194_cpufreq dwmac_tegra(+) arm_dsu_pmu stmmac_platform stmmac pcs_xpcs rfkill at24 host1x(+) tegra_bpmp_thermal ramoops reed_solomon fuse loop nfnetlink xfs mmc_block rpmb_core ucsi_ccg ina3221 crct10dif_ce xhci_tegra ghash_ce lm90 sha2_ce sha256_arm64 sha1_ce sdhci_tegra pwm_fan sdhci_pltfm sdhci gpio_keys rtc_tegra cqhci mmc_core phy_tegra_xusb i2c_tegra tegra186_gpc_dma i2c_tegra_bpmp spi_tegra114 dm_mirror dm_region_hash dm_log dm_mod [ 41.665078] CPU: 4 UID: 0 PID: 794 Comm: (udev-worker) Not tainted 6.11.0-29.31_1538613708.el10.aarch64+debug #1 [ 41.665838] Hardware name: NVIDIA NVIDIA Jetson AGX Orin Developer Kit/Jetson, BIOS 36.3.0-gcid-35594366 02/26/2024 [ 41.672555] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 41.679636] pc : __mutex_lock+0x670/0x878 [ 41.683834] lr : __mutex_lock+0x670/0x878 [ 41.688035] sp : ffff800084b77090 [ 41.691446] x29: ffff800084b77160 x28: ffffdd4bebf7b000 x27: ffffdd4be96b1000 [ 41.698799] x26: 1fffe0002308361c x25: 1ffff0001096ee18 x24: 0000000000000000 [ 41.706149] x23: 0000000000000000 x22: 0000000000000002 x21: ffffdd4be6e3c7a0 [ 41.713500] x20: ffff800084b770f0 x19: ffff00011841b1e8 x18: 0000000000000000 [ 41.720675] x17: 0000000000000000 x16: 0000000000000000 x15: 0720072007200720 [ 41.728023] x14: 0000000000000000 x13: 0000000000000001 x12: ffff6001a96eaab3 [ 41.735375] x11: 1fffe001a96eaab2 x10: ffff6001a96eaab2 x9 : ffffdd4be4838bbc [ 41.742723] x8 : 00009ffe5691554e x7 : ffff000d4b755593 x6 : 0000000000000001 [ 41.749985] x5 : ffff000d4b755590 x4 : 1fffe0001d88f001 x3 : dfff800000000000 [ 41.756988] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff0000ec478000 [ 41.764251] Call trace: [ 41.766695] __mutex_lock+0x670/0x878 [ 41.770373] mutex_lock_nested+0x2c/0x40 [ 41.774134] host1x_intr_start+0x54/0xf8 [host1x] [ 41.778863] host1x_runtime_resume+0x150/0x228 [host1x] [ 41.783935] pm_generic_runtime_resume+0x84/0xc8 [ 41.788485] __rpm_callback+0xa0/0x478 [ 41.792422] rpm_callback+0x15c/0x1a8 [ 41.795922] rpm_resume+0x698/0xc08 [ 41.799597] __pm_runtime_resume+0xa8/0x140 [ 41.803621] host1x_probe+0x810/0xbc0 [host1x] [ 41.807909] platform_probe+0xcc/0x1a8 [ 41.811845] really_probe+0x188/0x800 [ 41.815347] __driver_probe_device+0x164/0x360 [ 41.819810] driver_probe_device+0x64/0x1a8 [ 41.823834] __driver_attach+0x180/0x490 [ 41.827773] bus_for_each_dev+0x104/0x1a0 [ 41.831797] driver_attach+0x44/0x68 [ 41.835296] bus_add_driver+0x23c/0x4e8 [ 41.839235] driver_register+0x15c/0x3a8 [ 41.843170] __platform_register_drivers+0xa4/0x208 [ 41.848159] tegra_host1x_init+0x4c/0xff8 [host1x] [ 41.853147] do_one_initcall+0xd4/0x380 [ 41.856997] do_init_module+0x1dc/0x698 [ 41.860758] load_module+0xc70/0x1300 [ 41.864435] __do_sys_init_module+0x1a8/0x1d0 [ 41.868721] __arm64_sys_init_module+0x74/0xb0 [ 41.873183] invoke_syscall.constprop.0+0xdc/0x1e8 [ 41.877997] do_el0_svc+0x154/0x1d0 [ 41.881671] el0_svc+0x54/0x140 [ 41.884820] el0t_64_sync_handler+0x120/0x130 [ 41.889285] el0t_64_sync+0x1a4/0x1a8 [ 41.892960] irq event stamp: 69737 [ 41.896370] hardirqs last enabled at (69737): [<ffffdd4be6d7768c>] _raw_spin_unlock_irqrestore+0x44/0xe8 [ 41.905739] hardirqs last disabled at (69736): ---truncated---

In the Linux kernel, the following vulnerability has been resolved: usb: typec: qcom-pmic: init value of hdr_len/txbuf_len earlier If the read of USB_PDPHY_RX_ACKNOWLEDGE_REG failed, then hdr_len and txbuf_len are uninitialized. This commit stops to print uninitialized value and misleading/false data.

A NULL pointer dereference flaw was found in the Linux kernel's BPF subsystem in the way a user triggers the map_get_next_key function of the BPF bloom filter. This flaw allows a local user to crash the system. This flaw affects Linux kernel versions prior to 5.17-rc1.

In the Linux kernel, the following vulnerability has been resolved: drm/msm/a4xx: fix error handling in a4xx_gpu_init() This code returns 1 on error instead of a negative error. It leads to an Oops in the caller. A second problem is that the check for "if (ret != -ENODATA)" cannot be true because "ret" is set to 1.

In the Linux kernel, the following vulnerability has been resolved: media: v4l2-core: explicitly clear ioctl input data As seen from a recent syzbot bug report, mistakes in the compat ioctl implementation can lead to uninitialized kernel stack data getting used as input for driver ioctl handlers. The reported bug is now fixed, but it's possible that other related bugs are still present or get added in the future. As the drivers need to check user input already, the possible impact is fairly low, but it might still cause an information leak. To be on the safe side, always clear the entire ioctl buffer before calling the conversion handler functions that are meant to initialize them.

In the Linux kernel, the following vulnerability has been resolved: mm/mempolicy: do not allow illegal MPOL_F_NUMA_BALANCING | MPOL_LOCAL in mbind() syzbot reported access to unitialized memory in mbind() [1] Issue came with commit bda420b98505 ("numa balancing: migrate on fault among multiple bound nodes") This commit added a new bit in MPOL_MODE_FLAGS, but only checked valid combination (MPOL_F_NUMA_BALANCING can only be used with MPOL_BIND) in do_set_mempolicy() This patch moves the check in sanitize_mpol_flags() so that it is also used by mbind() [1] BUG: KMSAN: uninit-value in __mpol_equal+0x567/0x590 mm/mempolicy.c:2260 __mpol_equal+0x567/0x590 mm/mempolicy.c:2260 mpol_equal include/linux/mempolicy.h:105 [inline] vma_merge+0x4a1/0x1e60 mm/mmap.c:1190 mbind_range+0xcc8/0x1e80 mm/mempolicy.c:811 do_mbind+0xf42/0x15f0 mm/mempolicy.c:1333 kernel_mbind mm/mempolicy.c:1483 [inline] __do_sys_mbind mm/mempolicy.c:1490 [inline] __se_sys_mbind+0x437/0xb80 mm/mempolicy.c:1486 __x64_sys_mbind+0x19d/0x200 mm/mempolicy.c:1486 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x44/0xae Uninit was created at: slab_alloc_node mm/slub.c:3221 [inline] slab_alloc mm/slub.c:3230 [inline] kmem_cache_alloc+0x751/0xff0 mm/slub.c:3235 mpol_new mm/mempolicy.c:293 [inline] do_mbind+0x912/0x15f0 mm/mempolicy.c:1289 kernel_mbind mm/mempolicy.c:1483 [inline] __do_sys_mbind mm/mempolicy.c:1490 [inline] __se_sys_mbind+0x437/0xb80 mm/mempolicy.c:1486 __x64_sys_mbind+0x19d/0x200 mm/mempolicy.c:1486 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x44/0xae ===================================================== Kernel panic - not syncing: panic_on_kmsan set ... CPU: 0 PID: 15049 Comm: syz-executor.0 Tainted: G B 5.15.0-rc2-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1ff/0x28e lib/dump_stack.c:106 dump_stack+0x25/0x28 lib/dump_stack.c:113 panic+0x44f/0xdeb kernel/panic.c:232 kmsan_report+0x2ee/0x300 mm/kmsan/report.c:186 __msan_warning+0xd7/0x150 mm/kmsan/instrumentation.c:208 __mpol_equal+0x567/0x590 mm/mempolicy.c:2260 mpol_equal include/linux/mempolicy.h:105 [inline] vma_merge+0x4a1/0x1e60 mm/mmap.c:1190 mbind_range+0xcc8/0x1e80 mm/mempolicy.c:811 do_mbind+0xf42/0x15f0 mm/mempolicy.c:1333 kernel_mbind mm/mempolicy.c:1483 [inline] __do_sys_mbind mm/mempolicy.c:1490 [inline] __se_sys_mbind+0x437/0xb80 mm/mempolicy.c:1486 __x64_sys_mbind+0x19d/0x200 mm/mempolicy.c:1486 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x44/0xae