An issue in the AsDB service of HI-SCAN 6040i Hitrax HX-03-19-I allows attackers to enumerate user credentials via crafted GIOP protocol requests.

When responding to new h2c connection requests, Apache Tomcat versions 10.0.0-M1 to 10.0.0, 9.0.0.M1 to 9.0.41 and 8.5.0 to 8.5.61 could duplicate request headers and a limited amount of request body from one request to another meaning user A and user B could both see the results of user A's request.

Improper component protection vulnerability in SmsViewerActivity of Samsung Message prior to SMR July-2021 Release 1 allows untrusted applications to access Message files.

Adobe ColdFusion versions July 12 release (2018.0.0.310739), Update 6 and earlier, and Update 14 and earlier have a use of a component with a known vulnerability vulnerability. Successful exploitation could lead to information disclosure.

Exposure of Sensitive Information to an Unauthorized Actor vulnerability in EFM-Networks, Inc. IpTIME T5008, EFM-Networks, Inc. IpTIME AX2004M, EFM-Networks, Inc. IpTIME AX3000Q, EFM-Networks, Inc. IpTIME AX6000M allows Authentication Bypass.This issue affects ipTIME T5008: through 15.26.8; ipTIME AX2004M: through 15.26.8; ipTIME AX3000Q: through 15.26.8; ipTIME AX6000M: through 15.26.8.

A vulnerability has been identified in LOGO! 8 BM (incl. SIPLUS variants) (All versions < V1.81.2). An attacker with network access to the integrated web server on port 80/tcp could obtain the session ID of an active user session. A user must be logged in to the web interface. Siemens recommends to use the integrated webserver on port 80/tcp only in trusted networks.

ManageWiki is an extension to the MediaWiki project. The 'wikiconfig' API leaked the value of private configuration variables set through the ManageWiki variable to all users. This has been patched by https://github.com/miraheze/ManageWiki/compare/99f3b2c8af18...befb83c66f5b.patch. If you are unable to patch set `$wgAPIListModules['wikiconfig'] = 'ApiQueryDisabled';` or remove private config as a workaround.

IBM SAN Volume Controller, IBM Storwize, IBM Spectrum Virtualize and IBM FlashSystem products ( 6.1, 6.2, 6.3, 6.4, 7.1, 7.2, 7.3, 7.4, 7.5, 7.6, 7.6.1, 7.7, 7.7.1, 7.8, 7.8.1, 8.1, and 8.1.1) web handler /DownloadFile does not require authentication to read arbitrary files from the system. IBM X-Force ID: 139473.

Sensitive Information Disclosure vulnerability discovered by Quiz And Survey Master plugin <= 7.3.10 on WordPress.

An issue was discovered in Browserify-HMR. Attackers are able to steal developer's code because the origin of requests is not checked by the WebSocket server, which is used for HMR (Hot Module Replacement). Anyone can receive the HMR message sent by the WebSocket server via a ws://127.0.0.1:3123/ connection from any origin.

A vulnerability has been identified in Mendix Applications using Mendix 7 (All versions < V7.23.31), Mendix Applications using Mendix 8 (All versions < V8.18.18), Mendix Applications using Mendix 9 (All versions < V9.11), Mendix Applications using Mendix 9 (V9.6) (All versions < V9.6.12). Applications built with an affected system publicly expose the internal project structure. This could allow an unauthenticated remote attacker to read confidential information.

The Easy Appointments plugin for WordPress is vulnerable to Sensitive Information Exposure in all versions up to, and including, 3.12.21 via the `/wp-json/wp/v2/eablocks/ea_appointments/` REST API endpoint. This is due to the endpoint being registered with `'permission_callback' => '__return_true'`, which allows access without any authentication or authorization checks. This makes it possible for unauthenticated attackers to extract sensitive customer appointment data including full names, email addresses, phone numbers, IP addresses, appointment descriptions, and pricing information.

A vulnerability in the directory permissions of Cisco Desk Phone 9800 Series, Cisco IP Phone 7800 and 8800 Series, and Cisco Video Phone 8875 could allow an unauthenticated, remote attacker to access sensitive information on an affected device. This vulnerability exists because the product exposes sensitive information to an actor that is not explicitly authorized to have access to that information. An attacker could exploit this vulnerability by sending a crafted packet to the IP address of a device that has Web Access enabled. A successful exploit could allow the attacker to access sensitive information from the device. Note: To exploit this vulnerability, Web Access must be enabled on the phone. Web Access is disabled by default.

In freeradius, the EAP-PWD function compute_password_element() leaks information about the password which allows an attacker to substantially reduce the size of an offline dictionary attack.

Reliable Controls MACH-ProWebCom 7.80 devices allow remote attackers to obtain sensitive information via a direct request for the data/fileinfo.xml or job/job.json file, as demonstrated the Master Password field.

An issue was discovered in Sitecore Experience Platform (XP), Experience Manager (XM), and Experience Commerce (XC) 8.0 Initial Release through 10.4 Initial Release. An unauthenticated attacker can read arbitrary files.

Information disclosure in Netwave IP camera at get_status.cgi (via HTTP on port 8000) allows an unauthenticated attacker to exfiltrate sensitive information from the device.

IBM Maximo Asset Management 7.6.1.2 and 7.6.1.3 could allow a remote attacker to obtain sensitive information when a detailed technical error message is returned in the browser. This information could be used in further attacks against the system. IBM X-Force ID: 237587.

Exposure of sensitive information to an unauthorized actor in Microsoft Office Outlook allows an unauthorized attacker to perform spoofing over a network.

The vulnerability exists in BLUVOYIX due to an improper password storage implementation and subsequent exposure via unauthenticated APIs. An unauthenticated remote attacker could exploit this vulnerability by sending specially crafted HTTP requests to the vulnerable users API to retrieve the plaintext passwords of all user users. Successful exploitation of this vulnerability could allow the attacker to gain full access to customers' data and completely compromise the targeted platform by logging in using an exposed admin email address and password.

Vulnerability in the Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition product of Oracle Java SE (component: JAXP). Supported versions that are affected are Oracle Java SE: 8u481, 8u481-b50, 8u481-perf, 11.0.30, 17.0.18, 21.0.10, 25.0.2, 26; Oracle GraalVM for JDK: 17.0.18 and 21.0.10; Oracle GraalVM Enterprise Edition: 21.3.17. Easily exploitable vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition accessible data. Note: This vulnerability can be exploited by using APIs in the specified Component, e.g., through a web service which supplies data to the APIs. This vulnerability also applies to Java deployments, typically in clients running sandboxed Java Web Start applications or sandboxed Java applets, that load and run untrusted code (e.g., code that comes from the internet) and rely on the Java sandbox for security. CVSS 3.1 Base Score 7.5 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N).

A flaw was found in the way dic_unserialize function of glusterfs does not handle negative key length values. An attacker could use this flaw to read memory from other locations into the stored dict value.

Vite is a frontend tooling framework for JavaScript. Prior to 8.0.16, 7.3.5, and 6.4.3, the contents of files that are specified by server.fs.deny can be returned to the browser on Windows. Vite’s dev server denies direct access to sensitive files through server.fs.deny, including entries such as .env, .env.*, and *.{crt,pem}. However, on Windows, the deny logic does not correctly normalize NTFS ADS path forms before access checks are applied. Because of this, requests such as /.env::$DATA?raw are treated as allowed paths, while Windows resolves them to the original file's default data stream. Similar to that, Windows allows accessing a file using a different name with the 8.3 short name compatibility feature. Vite did not reject accessing files via them. This vulnerability is fixed in 8.0.16, 7.3.5, and 6.4.3.

This vulnerability exists in Tacitine Firewall, all versions of EN6200-PRIME QUAD-35 and EN6200-PRIME QUAD-100 between 19.1.1 to 22.20.1 (inclusive), due to insecure design in the Tacitine Firewall web-based management interface. An unauthenticated remote attacker could exploit this vulnerability by sending a specially crafted http request on the targeted device. Successful exploitation of this vulnerability could allow an unauthenticated remote attacker to view sensitive information on the targeted device.

Capgo before 12.128.2 contains an information disclosure vulnerability in the /functions/v1/channel_self endpoint that allows unauthenticated attackers to enumerate non-public channel names and determine app existence and subscription status. Remote attackers can send GET requests with arbitrary app_id parameters to disclose internal rollout channels, enumerate valid applications across tenants, and leak billing status without authentication or device binding.

lms version <= LMS_011123 contains a Local File Disclosure vulnerability in File reading functionality in LMS module that can result in Possible to read files on the server. This attack appear to be exploitable via GET parameter. This vulnerability appears to have been fixed in after commit 254765e.

Lemmy is a link aggregator and forum for the fediverse. Starting in version 0.17.0 and prior to version 0.19.1, users can report private messages, even when they're neither sender nor recipient of the message. The API response to creating a private message report contains the private message itself, which means any user can just iterate over message ids to (loudly) obtain all private messages of an instance. A user with instance admin privileges can also abuse this if the private message is removed from the response, as they're able to see the resulting reports. Creating a private message report by POSTing to `/api/v3/private_message/report` does not validate whether the reporter is the recipient of the message. lemmy-ui does not allow the sender to report the message; the API method should likely be restricted to accessible to recipients only. The API response when creating a report contains the `private_message_report_view` with all the details of the report, including the private message that has been reported: Any authenticated user can obtain arbitrary (untargeted) private message contents. Privileges required depend on the instance configuration; when registrations are enabled without application system, the privileges required are practically none. When registration applications are required, privileges required could be considered low, but this assessment heavily varies by instance. Version 0.19.1 contains a patch for this issue. A workaround is available. If an update to a fixed Lemmy version is not immediately possible, the API route can be blocked in the reverse proxy. This will prevent anyone from reporting private messages, but it will also prevent exploitation before the update has been applied.

A vulnerability in the Control and Provisioning of Wireless Access Points (CAPWAP) protocol component of Cisco Wireless LAN Controller (WLC) Software could allow an unauthenticated, remote attacker to retrieve memory contents, which could lead to the disclosure of confidential information. The vulnerability is due to insufficient condition checks in the part of the code that handles CAPWAP keepalive requests. An attacker could exploit this vulnerability by sending a crafted CAPWAP keepalive packet to a vulnerable Cisco WLC device. A successful exploit could allow the attacker to retrieve the contents of device memory, which could lead to the disclosure of confidential information.

A vulnerability in Cisco Catalyst SD-WAN Software could allow an unauthenticated, remote attacker to view sensitive information on an affected system. This vulnerability is due to insufficient file system restrictions. An authenticated attacker with netadmin privileges could exploit this vulnerability by accessing the vshell of an affected system. A successful exploit could allow the attacker to read sensitive information on the underlying operating system.

Exposure of Sensitive Information to an Unauthorized Actor, Insecure Storage of Sensitive Information vulnerability in Maven Archetype Plugin. This issue affects Maven Archetype Plugin: from 3.2.1 before 3.3.0. Users are recommended to upgrade to version 3.3.0, which fixes the issue. Archetype integration testing creates a file called ./target/classes/archetype-it/archetype-settings.xml This file contains all the content from the users ~/.m2/settings.xml file, which often contains information they do not want to publish. We expect that on many developer machines, this also contains credentials. When the user runs mvn verify again (without a mvn clean), this file becomes part of the final artifact. If a developer were to publish this into Maven Central or any other remote repository (whether as a release or a snapshot) their credentials would be published without them knowing.

Capgo before 12.128.2 contains an unauthenticated security definer RPC function get_identity_apikey_only that returns the owning user_id for supplied API keys, creating an API key validity oracle and user identity disclosure primitive. Attackers can call this endpoint with valid or invalid API keys to confirm key validity and map keys to user identifiers, then chain results into other exposed RPCs like get_orgs_v6 to retrieve organization membership and management email PII.

Arbitrary file read in the model loading mechanism (HDF5 integration) in Keras versions 3.0.0 through 3.13.1 on all supported platforms allows a remote attacker to read local files and disclose sensitive information via a crafted .keras model file utilizing HDF5 external dataset references.

The Comcast firmware on Cisco DPC3939 (firmware version dpc3939-P20-18-v303r20421733-160420a-CMCST); Cisco DPC3939 (firmware version dpc3939-P20-18-v303r20421746-170221a-CMCST); Cisco DPC3939B (firmware version dpc3939b-v303r204217-150321a-CMCST); Cisco DPC3941T (firmware version DPC3941_2.5s3_PROD_sey); and Arris TG1682G (eMTA&DOCSIS version 10.0.132.SIP.PC20.CT, software version TG1682_2.2p7s2_PROD_sey) devices does not include the HTTPOnly flag in a Set-Cookie header for administration applications, which makes it easier for remote attackers to obtain potentially sensitive information via script access to cookies.

Couchbase Server before 7.2.4 has a private key leak in goxdcr.log.

A security flaw has been discovered in D-Link DIR-605L and DIR-619L 2.06B01/2.13B01. Impacted is an unknown function of the component Wifi Setting Handler. Performing a manipulation results in information disclosure. The attack may be initiated remotely. The exploit has been released to the public and may be used for attacks. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was identified in birkir prime up to 0.4.0.beta.0. This impacts an unknown function of the file /graphql of the component GraphQL Directive Handler. Such manipulation leads to information exposure through error message. The attack may be performed from remote. The exploit is publicly available and might be used. The project was informed of the problem early through an issue report but has not responded yet.

A security flaw has been discovered in MineAdmin 1.x/2.x. This affects an unknown function of the component Swagger. The manipulation results in information disclosure. The attack may be performed from remote. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.

The Syncee WordPress plugin before 1.0.10 leaks the administrator token that can be used to take over the administrator's account.

An information disclosure vulnerability has been identified in the Lenovo App Store which may allow some applications to gain unauthorized access to sensitive user data used by other unrelated applications.

Nextcloud server is an open source personal cloud product. Affected versions of this package are vulnerable to Information Exposure which fails to strip the Authorization header on HTTP downgrade. This can lead to account access exposure and compromise. It is recommended that the Nextcloud Server is upgraded to 23.0.7 or 24.0.3. It is recommended that the Nextcloud Enterprise Server is upgraded to 22.2.11, 23.0.7 or 24.0.3. There are no known workarounds for this issue.

An exposure of sensitive information to an unauthorized actor vulnerabiltiy [CWE-200] in FortiOS SSL-VPN versions 7.2.0, versions 7.0.0 through 7.0.6 and versions 6.4.0 through 6.4.9 may allow a remote unauthenticated attacker to gain information about LDAP and SAML settings configured in FortiOS.

Microsoft SQL Server Analysis Services in Microsoft SQL Server 2012, Microsoft SQL Server 2014, and Microsoft SQL Server 2016 allows an information disclosure vulnerability when it improperly enforces permissions, aka "Microsoft SQL Server Analysis Services Information Disclosure Vulnerability".

OneDev is a Git server with CI/CD, kanban, and packages. A vulnerability in versions prior to 11.0.9 allows unauthenticated users to read arbitrary files accessible by the OneDev server process. This issue has been fixed in version 11.0.9.

Permission control vulnerability in the software update module. Impact: Successful exploitation of this vulnerability may affect service confidentiality.

The W3 Total Cache plugin for WordPress is vulnerable to information exposure in all versions up to, and including, 2.9.3. This is due to the plugin bypassing its entire output buffering and processing pipeline when the request's User-Agent header contains "W3 Total Cache", which causes raw mfunc/mclude dynamic fragment HTML comments — including the W3TC_DYNAMIC_SECURITY security token — to be rendered in the page source. This makes it possible for unauthenticated attackers to discover the value of the W3TC_DYNAMIC_SECURITY constant by sending a crafted User-Agent header to any page that contains developer-placed dynamic fragment tags, granted the site has the fragment caching feature enabled. With the leaked W3TC_DYNAMIC_SECURITY token, an attacker can craft valid mfunc tags to execute arbitrary PHP code on the server, achieving remote code execution.

IBM InfoSphere Information Server 11.7 could allow a remote attacker to obtain sensitive information when a detailed technical error message is returned in a stack trace. This information could be used in further attacks against the system. IBM X-Force ID: 231202.

Hoverfly is a lightweight service virtualization/ API simulation / API mocking tool for developers and testers. The `/api/v2/simulation` POST handler allows users to create new simulation views from the contents of a user-specified file. This feature can be abused by an attacker to read arbitrary files from the Hoverfly server. Note that, although the code prevents absolute paths from being specified, an attacker can escape out of the `hf.Cfg.ResponsesBodyFilesPath` base path by using `../` segments and reach any arbitrary files. This issue was found using the Uncontrolled data used in path expression CodeQL query for python. Users are advised to make sure the final path (`filepath.Join(hf.Cfg.ResponsesBodyFilesPath, filePath)`) is contained within the expected base path (`filepath.Join(hf.Cfg.ResponsesBodyFilesPath, "/")`). This issue is also tracked as GHSL-2023-274.

In affected versions of Octopus Deploy it is possible for certain types of sensitive variables to inadvertently become unmasked when viewed in variable preview.

An issue was discovered in the Cloud Controller API in Cloud Foundry Foundation CAPI-release versions after v1.6.0 and prior to v1.35.0 and cf-release versions after v244 and prior to v268. A carefully crafted CAPI request from a Space Developer can allow them to gain access to files on the Cloud Controller VM for that installation.

The user and password data base is exposed by an unprotected web server resource. Passwords are hashed with a weak hashing algorithm and therefore allow an attacker to determine the password by using rainbow tables.