Nokogiri is an open source XML and HTML library for the Ruby programming language. Prior to 1.19.4, Nokogiri::XML::Document#root= validated only that the new root was a Nokogiri::XML::Node, allowing a DTD node to be set as the document root. The result is a heap use-after-free during garbage collection or finalization, leading to an invalid memory read or potentially a segfault. This vulnerability is fixed in 1.19.4.

Nokogiri is an open source XML and HTML library for the Ruby programming language. Prior to 1.19.4, calling Document#encoding= with an invalid encoding (e.g., a non-string, or a string containing a null byte) raises an exception, but only after freeing the document's current encoding string without replacing it. The document is left referencing freed memory, so the next call to Document#encoding reads invalid memory, which can cause a segfault or leak freed bytes into a Ruby String. Affects the CRuby (libxml2) implementation only; JRuby is not affected. This vulnerability is fixed in 1.19.4.

Nokogiri is an open source XML and HTML library for the Ruby programming language. Prior to 1.19.4, Nokogiri’s CRuby native extension could leave a Ruby wrapper pointing to freed memory when replacing the value of an XML attribute. If Ruby code had already accessed an attribute child node, Nokogiri::XML::Attr#value= could free the underlying native child node while the wrapper remained reachable through the document node cache. A later use of the freed child node or a Ruby GC mark could dereference an invalid pointer, causing an invalid read and a possible segfault. This vulnerability is fixed in 1.19.4.

Nokogiri is an open source XML and HTML library for the Ruby programming language. Prior to 1.19.4, XInclude substitution performed by Nokogiri::XML::Node#do_xinclude replaced each <xi:include> in place, freeing the include node along with its children (such as <xi:fallback> and its descendants) and any namespaces declared on them. If an application had already exposed one of those nodes or namespaces to Ruby, the corresponding Ruby object was left pointing at freed memory. Using the object could result in invalid reads or writes to memory. This vulnerability is fixed in 1.19.4.

Temporary disruption of the ADM license service. The impact of this includes preventing new licenses from being issued or renewed by Citrix ADM.

In the Linux kernel, the following vulnerability has been resolved: net: ip_tunnel: prevent perpetual headroom growth syzkaller triggered following kasan splat: BUG: KASAN: use-after-free in __skb_flow_dissect+0x19d1/0x7a50 net/core/flow_dissector.c:1170 Read of size 1 at addr ffff88812fb4000e by task syz-executor183/5191 [..] kasan_report+0xda/0x110 mm/kasan/report.c:588 __skb_flow_dissect+0x19d1/0x7a50 net/core/flow_dissector.c:1170 skb_flow_dissect_flow_keys include/linux/skbuff.h:1514 [inline] ___skb_get_hash net/core/flow_dissector.c:1791 [inline] __skb_get_hash+0xc7/0x540 net/core/flow_dissector.c:1856 skb_get_hash include/linux/skbuff.h:1556 [inline] ip_tunnel_xmit+0x1855/0x33c0 net/ipv4/ip_tunnel.c:748 ipip_tunnel_xmit+0x3cc/0x4e0 net/ipv4/ipip.c:308 __netdev_start_xmit include/linux/netdevice.h:4940 [inline] netdev_start_xmit include/linux/netdevice.h:4954 [inline] xmit_one net/core/dev.c:3548 [inline] dev_hard_start_xmit+0x13d/0x6d0 net/core/dev.c:3564 __dev_queue_xmit+0x7c1/0x3d60 net/core/dev.c:4349 dev_queue_xmit include/linux/netdevice.h:3134 [inline] neigh_connected_output+0x42c/0x5d0 net/core/neighbour.c:1592 ... ip_finish_output2+0x833/0x2550 net/ipv4/ip_output.c:235 ip_finish_output+0x31/0x310 net/ipv4/ip_output.c:323 .. iptunnel_xmit+0x5b4/0x9b0 net/ipv4/ip_tunnel_core.c:82 ip_tunnel_xmit+0x1dbc/0x33c0 net/ipv4/ip_tunnel.c:831 ipgre_xmit+0x4a1/0x980 net/ipv4/ip_gre.c:665 __netdev_start_xmit include/linux/netdevice.h:4940 [inline] netdev_start_xmit include/linux/netdevice.h:4954 [inline] xmit_one net/core/dev.c:3548 [inline] dev_hard_start_xmit+0x13d/0x6d0 net/core/dev.c:3564 ... The splat occurs because skb->data points past skb->head allocated area. This is because neigh layer does: __skb_pull(skb, skb_network_offset(skb)); ... but skb_network_offset() returns a negative offset and __skb_pull() arg is unsigned. IOW, we skb->data gets "adjusted" by a huge value. The negative value is returned because skb->head and skb->data distance is more than 64k and skb->network_header (u16) has wrapped around. The bug is in the ip_tunnel infrastructure, which can cause dev->needed_headroom to increment ad infinitum. The syzkaller reproducer consists of packets getting routed via a gre tunnel, and route of gre encapsulated packets pointing at another (ipip) tunnel. The ipip encapsulation finds gre0 as next output device. This results in the following pattern: 1). First packet is to be sent out via gre0. Route lookup found an output device, ipip0. 2). ip_tunnel_xmit for gre0 bumps gre0->needed_headroom based on the future output device, rt.dev->needed_headroom (ipip0). 3). ip output / start_xmit moves skb on to ipip0. which runs the same code path again (xmit recursion). 4). Routing step for the post-gre0-encap packet finds gre0 as output device to use for ipip0 encapsulated packet. tunl0->needed_headroom is then incremented based on the (already bumped) gre0 device headroom. This repeats for every future packet: gre0->needed_headroom gets inflated because previous packets' ipip0 step incremented rt->dev (gre0) headroom, and ipip0 incremented because gre0 needed_headroom was increased. For each subsequent packet, gre/ipip0->needed_headroom grows until post-expand-head reallocations result in a skb->head/data distance of more than 64k. Once that happens, skb->network_header (u16) wraps around when pskb_expand_head tries to make sure that skb_network_offset() is unchanged after the headroom expansion/reallocation. After this skb_network_offset(skb) returns a different (and negative) result post headroom expansion. The next trip to neigh layer (or anything else that would __skb_pull the network header) makes skb->data point to a memory location outside skb->head area. v2: Cap the needed_headroom update to an arbitarily chosen upperlimit to prevent perpetual increase instead of dropping the headroom increment completely.

A use after free vulnerability [CWE-416] in FortiOS version 7.2.0 through 7.2.4 and version 7.0.0 through 7.0.10 and FortiProxy version 7.2.0 through 7.2.2 and version 7.0.0 through 7.0.8 may allow an unauthenticated remote attacker to crash the WAD process via multiple crafted packets reaching proxy policies or firewall policies with proxy mode alongside SSL deep packet inspection.

A flaw was found in libsoup, a library for handling HTTP requests. This vulnerability, known as a Use-After-Free, occurs in the HTTP/2 server implementation. A remote attacker can exploit this by sending specially crafted HTTP/2 requests that cause authentication failures. This can lead to the application attempting to access memory that has already been freed, potentially causing application instability or crashes, resulting in a Denial of Service (DoS).

OpenPrinting CUPS is a standards-based, open source printing system for Linux and other Unix-like operating systems. Starting in version 2.0.0 and prior to version 2.4.6, CUPS logs data of free memory to the logging service AFTER the connection has been closed, when it should have logged the data right before. This is a use-after-free bug that impacts the entire cupsd process. The exact cause of this issue is the function `httpClose(con->http)` being called in `scheduler/client.c`. The problem is that httpClose always, provided its argument is not null, frees the pointer at the end of the call, only for cupsdLogClient to pass the pointer to httpGetHostname. This issue happens in function `cupsdAcceptClient` if LogLevel is warn or higher and in two scenarios: there is a double-lookup for the IP Address (HostNameLookups Double is set in `cupsd.conf`) which fails to resolve, or if CUPS is compiled with TCP wrappers and the connection is refused by rules from `/etc/hosts.allow` and `/etc/hosts.deny`. Version 2.4.6 has a patch for this issue.

A heap use after free issue was found in Opensc before version 0.22.0 in sc_file_valid.

ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 7.1.2-16 and 6.9.13-41, a heap use-after-free vulnerability in ImageMagick's MSL decoder allows an attacker to trigger access to freed memory by crafting an MSL file. This vulnerability is fixed in 7.1.2-16 and 6.9.13-41.

ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 7.1.2-16 and 6.9.13-41, a heap-use-after-free vulnerability exists in the MSL encoder, where a cloned image is destroyed twice. The MSL coder does not support writing MSL so the write capability has been removed. This vulnerability is fixed in 7.1.2-16 and 6.9.13-41.

ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 7.1.2-15 and 6.9.13-40, the MSL interpreter crashes when processing a invalid `<map>` element that causes it to use an image after it has been freed. Versions 7.1.2-15 and 6.9.13-40 contain a patch.

ImageMagick is free and open-source software used for editing and manipulating digital images. Prior to versions 7.1.2-15 and 6.9.13-40, a crafted MSL script triggers a heap-use-after-free. The operation element handler replaces and frees the image while the parser continues reading from it, leading to a UAF in ReadBlobString during further parsing. Versions 7.1.2-15 and 6.9.13-40 contain a patch.

FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to 3.22.0, A capture thread sends sample responses using a freed channel callback after a device channel close, leading to a use after free in ecam_channel_write. This vulnerability is fixed in 3.22.0.

Irssi 1.3.x and 1.4.x before 1.4.4 has a use-after-free because of use of a stale special collector reference. This occurs when printing of a non-formatted line is concurrent with printing of a formatted line.

Memory safety bug fixed in Thunderbird ESR 140.12. This vulnerability was fixed in Firefox ESR 140.12 and Thunderbird 140.12.

Use After Free vulnerability in Arm Ltd Bifrost GPU Kernel Driver, Arm Ltd Valhall GPU Kernel Driver, Arm Ltd Arm 5th Gen GPU Architecture Kernel Driver allows a local non-privileged user process to perform valid GPU memory processing operations to gain access to already freed memory.This issue affects Bifrost GPU Kernel Driver: from r41p0 through r49p4, from r50p0 through r51p0; Valhall GPU Kernel Driver: from r41p0 through r49p4, from r50p0 through r54p0; Arm 5th Gen GPU Architecture Kernel Driver: from r41p0 through r49p4, from r50p0 through r54p0.

There is a use-after-free vulnerability in a Huawei product. A module cannot deal with specific operations in special scenarios. Attackers can exploit this vulnerability by performing malicious operations. This can cause memory use-after-free, compromising normal service. Affected product include some versions of NIP6300, NIP6600, NIP6800, S1700, S2700, S5700, S6700 , S7700, S9700, Secospace USG6300, Secospace USG6500, Secospace USG6600 and USG9500.

In Dovecot before 2.3.10.1, a crafted SMTP/LMTP message triggers an unauthenticated use-after-free bug in submission-login, submission, or lmtp, and can lead to a crash under circumstances involving many newlines after a command.

Use-after-free vulnerability in the fz_subsample_pixmap function in fitz/pixmap.c in Artifex MuPDF 1.10a allows remote attackers to cause a denial of service (application crash) or possibly have unspecified other impact via a crafted document.