In the Linux kernel, the following vulnerability has been resolved: NFS: Don't corrupt the value of pg_bytes_written in nfs_do_recoalesce() The value of mirror->pg_bytes_written should only be updated after a successful attempt to flush out the requests on the list.

In the Linux kernel, the following vulnerability has been resolved: media: v4l2-core: explicitly clear ioctl input data As seen from a recent syzbot bug report, mistakes in the compat ioctl implementation can lead to uninitialized kernel stack data getting used as input for driver ioctl handlers. The reported bug is now fixed, but it's possible that other related bugs are still present or get added in the future. As the drivers need to check user input already, the possible impact is fairly low, but it might still cause an information leak. To be on the safe side, always clear the entire ioctl buffer before calling the conversion handler functions that are meant to initialize them.

In the Linux kernel, the following vulnerability has been resolved: iwlwifi: Fix memory leaks in error handling path Should an error occur (invalid TLV len or memory allocation failure), the memory already allocated in 'reduce_power_data' should be freed before returning, otherwise it is leaking.

In the Linux kernel, the following vulnerability has been resolved: crypto: qat - ADF_STATUS_PF_RUNNING should be set after adf_dev_init ADF_STATUS_PF_RUNNING is (only) used and checked by adf_vf2pf_shutdown() before calling adf_iov_putmsg()->mutex_lock(vf2pf_lock), however the vf2pf_lock is initialized in adf_dev_init(), which can fail and when it fail, the vf2pf_lock is either not initialized or destroyed, a subsequent use of vf2pf_lock will cause issue. To fix this issue, only set this flag if adf_dev_init() returns 0. [ 7.178404] BUG: KASAN: user-memory-access in __mutex_lock.isra.0+0x1ac/0x7c0 [ 7.180345] Call Trace: [ 7.182576] mutex_lock+0xc9/0xd0 [ 7.183257] adf_iov_putmsg+0x118/0x1a0 [intel_qat] [ 7.183541] adf_vf2pf_shutdown+0x4d/0x7b [intel_qat] [ 7.183834] adf_dev_shutdown+0x172/0x2b0 [intel_qat] [ 7.184127] adf_probe+0x5e9/0x600 [qat_dh895xccvf]

In the Linux kernel, the following vulnerability has been resolved: net: zero-initialize tc skb extension on allocation Function skb_ext_add() doesn't initialize created skb extension with any value and leaves it up to the user. However, since extension of type TC_SKB_EXT originally contained only single value tc_skb_ext->chain its users used to just assign the chain value without setting whole extension memory to zero first. This assumption changed when TC_SKB_EXT extension was extended with additional fields but not all users were updated to initialize the new fields which leads to use of uninitialized memory afterwards. UBSAN log: [ 778.299821] UBSAN: invalid-load in net/openvswitch/flow.c:899:28 [ 778.301495] load of value 107 is not a valid value for type '_Bool' [ 778.303215] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.12.0-rc7+ #2 [ 778.304933] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 778.307901] Call Trace: [ 778.308680] <IRQ> [ 778.309358] dump_stack+0xbb/0x107 [ 778.310307] ubsan_epilogue+0x5/0x40 [ 778.311167] __ubsan_handle_load_invalid_value.cold+0x43/0x48 [ 778.312454] ? memset+0x20/0x40 [ 778.313230] ovs_flow_key_extract.cold+0xf/0x14 [openvswitch] [ 778.314532] ovs_vport_receive+0x19e/0x2e0 [openvswitch] [ 778.315749] ? ovs_vport_find_upcall_portid+0x330/0x330 [openvswitch] [ 778.317188] ? create_prof_cpu_mask+0x20/0x20 [ 778.318220] ? arch_stack_walk+0x82/0xf0 [ 778.319153] ? secondary_startup_64_no_verify+0xb0/0xbb [ 778.320399] ? stack_trace_save+0x91/0xc0 [ 778.321362] ? stack_trace_consume_entry+0x160/0x160 [ 778.322517] ? lock_release+0x52e/0x760 [ 778.323444] netdev_frame_hook+0x323/0x610 [openvswitch] [ 778.324668] ? ovs_netdev_get_vport+0xe0/0xe0 [openvswitch] [ 778.325950] __netif_receive_skb_core+0x771/0x2db0 [ 778.327067] ? lock_downgrade+0x6e0/0x6f0 [ 778.328021] ? lock_acquire+0x565/0x720 [ 778.328940] ? generic_xdp_tx+0x4f0/0x4f0 [ 778.329902] ? inet_gro_receive+0x2a7/0x10a0 [ 778.330914] ? lock_downgrade+0x6f0/0x6f0 [ 778.331867] ? udp4_gro_receive+0x4c4/0x13e0 [ 778.332876] ? lock_release+0x52e/0x760 [ 778.333808] ? dev_gro_receive+0xcc8/0x2380 [ 778.334810] ? lock_downgrade+0x6f0/0x6f0 [ 778.335769] __netif_receive_skb_list_core+0x295/0x820 [ 778.336955] ? process_backlog+0x780/0x780 [ 778.337941] ? mlx5e_rep_tc_netdevice_event_unregister+0x20/0x20 [mlx5_core] [ 778.339613] ? seqcount_lockdep_reader_access.constprop.0+0xa7/0xc0 [ 778.341033] ? kvm_clock_get_cycles+0x14/0x20 [ 778.342072] netif_receive_skb_list_internal+0x5f5/0xcb0 [ 778.343288] ? __kasan_kmalloc+0x7a/0x90 [ 778.344234] ? mlx5e_handle_rx_cqe_mpwrq+0x9e0/0x9e0 [mlx5_core] [ 778.345676] ? mlx5e_xmit_xdp_frame_mpwqe+0x14d0/0x14d0 [mlx5_core] [ 778.347140] ? __netif_receive_skb_list_core+0x820/0x820 [ 778.348351] ? mlx5e_post_rx_mpwqes+0xa6/0x25d0 [mlx5_core] [ 778.349688] ? napi_gro_flush+0x26c/0x3c0 [ 778.350641] napi_complete_done+0x188/0x6b0 [ 778.351627] mlx5e_napi_poll+0x373/0x1b80 [mlx5_core] [ 778.352853] __napi_poll+0x9f/0x510 [ 778.353704] ? mlx5_flow_namespace_set_mode+0x260/0x260 [mlx5_core] [ 778.355158] net_rx_action+0x34c/0xa40 [ 778.356060] ? napi_threaded_poll+0x3d0/0x3d0 [ 778.357083] ? sched_clock_cpu+0x18/0x190 [ 778.358041] ? __common_interrupt+0x8e/0x1a0 [ 778.359045] __do_softirq+0x1ce/0x984 [ 778.359938] __irq_exit_rcu+0x137/0x1d0 [ 778.360865] irq_exit_rcu+0xa/0x20 [ 778.361708] common_interrupt+0x80/0xa0 [ 778.362640] </IRQ> [ 778.363212] asm_common_interrupt+0x1e/0x40 [ 778.364204] RIP: 0010:native_safe_halt+0xe/0x10 [ 778.365273] Code: 4f ff ff ff 4c 89 e7 e8 50 3f 40 fe e9 dc fe ff ff 48 89 df e8 43 3f 40 fe eb 90 cc e9 07 00 00 00 0f 00 2d 74 05 62 00 fb f4 <c3> 90 e9 07 00 00 00 0f 00 2d 64 05 62 00 f4 c3 cc cc 0f 1f 44 00 [ 778.369355] RSP: 0018:ffffffff84407e48 EFLAGS: 00000246 [ 778.370570] RAX ---truncated---

In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: gadget: Free gadget structure only after freeing endpoints As part of commit e81a7018d93a ("usb: dwc3: allocate gadget structure dynamically") the dwc3_gadget_release() was added which will free the dwc->gadget structure upon the device's removal when usb_del_gadget_udc() is called in dwc3_gadget_exit(). However, simply freeing the gadget results a dangling pointer situation: the endpoints created in dwc3_gadget_init_endpoints() have their dep->endpoint.ep_list members chained off the list_head anchored at dwc->gadget->ep_list. Thus when dwc->gadget is freed, the first dwc3_ep in the list now has a dangling prev pointer and likewise for the next pointer of the dwc3_ep at the tail of the list. The dwc3_gadget_free_endpoints() that follows will result in a use-after-free when it calls list_del(). This was caught by enabling KASAN and performing a driver unbind. The recent commit 568262bf5492 ("usb: dwc3: core: Add shutdown callback for dwc3") also exposes this as a panic during shutdown. There are a few possibilities to fix this. One could be to perform a list_del() of the gadget->ep_list itself which removes it from the rest of the dwc3_ep chain. Another approach is what this patch does, by splitting up the usb_del_gadget_udc() call into its separate "del" and "put" components. This allows dwc3_gadget_free_endpoints() to be called before the gadget is finally freed with usb_put_gadget().

In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Fix RX consumer index logic in the error path. In bnxt_rx_pkt(), the RX buffers are expected to complete in order. If the RX consumer index indicates an out of order buffer completion, it means we are hitting a hardware bug and the driver will abort all remaining RX packets and reset the RX ring. The RX consumer index that we pass to bnxt_discard_rx() is not correct. We should be passing the current index (tmp_raw_cons) instead of the old index (raw_cons). This bug can cause us to be at the wrong index when trying to abort the next RX packet. It can crash like this: #0 [ffff9bbcdf5c39a8] machine_kexec at ffffffff9b05e007 #1 [ffff9bbcdf5c3a00] __crash_kexec at ffffffff9b111232 #2 [ffff9bbcdf5c3ad0] panic at ffffffff9b07d61e #3 [ffff9bbcdf5c3b50] oops_end at ffffffff9b030978 #4 [ffff9bbcdf5c3b78] no_context at ffffffff9b06aaf0 #5 [ffff9bbcdf5c3bd8] __bad_area_nosemaphore at ffffffff9b06ae2e #6 [ffff9bbcdf5c3c28] bad_area_nosemaphore at ffffffff9b06af24 #7 [ffff9bbcdf5c3c38] __do_page_fault at ffffffff9b06b67e #8 [ffff9bbcdf5c3cb0] do_page_fault at ffffffff9b06bb12 #9 [ffff9bbcdf5c3ce0] page_fault at ffffffff9bc015c5 [exception RIP: bnxt_rx_pkt+237] RIP: ffffffffc0259cdd RSP: ffff9bbcdf5c3d98 RFLAGS: 00010213 RAX: 000000005dd8097f RBX: ffff9ba4cb11b7e0 RCX: ffffa923cf6e9000 RDX: 0000000000000fff RSI: 0000000000000627 RDI: 0000000000001000 RBP: ffff9bbcdf5c3e60 R8: 0000000000420003 R9: 000000000000020d R10: ffffa923cf6ec138 R11: ffff9bbcdf5c3e83 R12: ffff9ba4d6f928c0 R13: ffff9ba4cac28080 R14: ffff9ba4cb11b7f0 R15: ffff9ba4d5a30000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018

In the Linux kernel, the following vulnerability has been resolved: bus: mhi: pci_generic: Remove WQ_MEM_RECLAIM flag from state workqueue A recent change created a dedicated workqueue for the state-change work with WQ_HIGHPRI (no strong reason for that) and WQ_MEM_RECLAIM flags, but the state-change work (mhi_pm_st_worker) does not guarantee forward progress under memory pressure, and will even wait on various memory allocations when e.g. creating devices, loading firmware, etc... The work is then not part of a memory reclaim path... Moreover, this causes a warning in check_flush_dependency() since we end up in code that flushes a non-reclaim workqueue: [ 40.969601] workqueue: WQ_MEM_RECLAIM mhi_hiprio_wq:mhi_pm_st_worker [mhi] is flushing !WQ_MEM_RECLAIM events_highpri:flush_backlog [ 40.969612] WARNING: CPU: 4 PID: 158 at kernel/workqueue.c:2607 check_flush_dependency+0x11c/0x140 [ 40.969733] Call Trace: [ 40.969740] __flush_work+0x97/0x1d0 [ 40.969745] ? wake_up_process+0x15/0x20 [ 40.969749] ? insert_work+0x70/0x80 [ 40.969750] ? __queue_work+0x14a/0x3e0 [ 40.969753] flush_work+0x10/0x20 [ 40.969756] rollback_registered_many+0x1c9/0x510 [ 40.969759] unregister_netdevice_queue+0x94/0x120 [ 40.969761] unregister_netdev+0x1d/0x30 [ 40.969765] mhi_net_remove+0x1a/0x40 [mhi_net] [ 40.969770] mhi_driver_remove+0x124/0x250 [mhi] [ 40.969776] device_release_driver_internal+0xf0/0x1d0 [ 40.969778] device_release_driver+0x12/0x20 [ 40.969782] bus_remove_device+0xe1/0x150 [ 40.969786] device_del+0x17b/0x3e0 [ 40.969791] mhi_destroy_device+0x9a/0x100 [mhi] [ 40.969796] ? mhi_unmap_single_use_bb+0x50/0x50 [mhi] [ 40.969799] device_for_each_child+0x5e/0xa0 [ 40.969804] mhi_pm_st_worker+0x921/0xf50 [mhi]

In the Linux kernel, the following vulnerability has been resolved: drm/msm/devfreq: Fix OPP refcnt leak

In the Linux kernel, the following vulnerability has been resolved: phonet/pep: refuse to enable an unbound pipe This ioctl() implicitly assumed that the socket was already bound to a valid local socket name, i.e. Phonet object. If the socket was not bound, two separate problems would occur: 1) We'd send an pipe enablement request with an invalid source object. 2) Later socket calls could BUG on the socket unexpectedly being connected yet not bound to a valid object.

In the Linux kernel, the following vulnerability has been resolved: usb: musb: tusb6010: check return value after calling platform_get_resource() It will cause null-ptr-deref if platform_get_resource() returns NULL, we need check the return value.

In the Linux kernel, the following vulnerability has been resolved: dm thin: make get_first_thin use rcu-safe list first function The documentation in rculist.h explains the absence of list_empty_rcu() and cautions programmers against relying on a list_empty() -> list_first() sequence in RCU safe code. This is because each of these functions performs its own READ_ONCE() of the list head. This can lead to a situation where the list_empty() sees a valid list entry, but the subsequent list_first() sees a different view of list head state after a modification. In the case of dm-thin, this author had a production box crash from a GP fault in the process_deferred_bios path. This function saw a valid list head in get_first_thin() but when it subsequently dereferenced that and turned it into a thin_c, it got the inside of the struct pool, since the list was now empty and referring to itself. The kernel on which this occurred printed both a warning about a refcount_t being saturated, and a UBSAN error for an out-of-bounds cpuid access in the queued spinlock, prior to the fault itself. When the resulting kdump was examined, it was possible to see another thread patiently waiting in thin_dtr's synchronize_rcu. The thin_dtr call managed to pull the thin_c out of the active thins list (and have it be the last entry in the active_thins list) at just the wrong moment which lead to this crash. Fortunately, the fix here is straight forward. Switch get_first_thin() function to use list_first_or_null_rcu() which performs just a single READ_ONCE() and returns NULL if the list is already empty. This was run against the devicemapper test suite's thin-provisioning suites for delete and suspend and no regressions were observed.

In the Linux kernel, the following vulnerability has been resolved: NFS: Fix an Oopsable condition in __nfs_pageio_add_request() Ensure that nfs_pageio_error_cleanup() resets the mirror array contents, so that the structure reflects the fact that it is now empty. Also change the test in nfs_pageio_do_add_request() to be more robust by checking whether or not the list is empty rather than relying on the value of pg_count.

In the Linux kernel, the following vulnerability has been resolved: scsi: core: Put LLD module refcnt after SCSI device is released SCSI host release is triggered when SCSI device is freed. We have to make sure that the low-level device driver module won't be unloaded before SCSI host instance is released because shost->hostt is required in the release handler. Make sure to put LLD module refcnt after SCSI device is released. Fixes a kernel panic of 'BUG: unable to handle page fault for address' reported by Changhui and Yi.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_set_pipapo_avx2: Add irq_fpu_usable() check, fallback to non-AVX2 version Arturo reported this backtrace: [709732.358791] WARNING: CPU: 3 PID: 456 at arch/x86/kernel/fpu/core.c:128 kernel_fpu_begin_mask+0xae/0xe0 [709732.358793] Modules linked in: binfmt_misc nft_nat nft_chain_nat nf_nat nft_counter nft_ct nf_tables nf_conntrack_netlink nfnetlink 8021q garp stp mrp llc vrf intel_rapl_msr intel_rapl_common skx_edac nfit libnvdimm ipmi_ssif x86_pkg_temp_thermal intel_powerclamp coretemp crc32_pclmul mgag200 ghash_clmulni_intel drm_kms_helper cec aesni_intel drm libaes crypto_simd cryptd glue_helper mei_me dell_smbios iTCO_wdt evdev intel_pmc_bxt iTCO_vendor_support dcdbas pcspkr rapl dell_wmi_descriptor wmi_bmof sg i2c_algo_bit watchdog mei acpi_ipmi ipmi_si button nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ipmi_devintf ipmi_msghandler ip_tables x_tables autofs4 ext4 crc16 mbcache jbd2 dm_mod raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor sd_mod t10_pi crc_t10dif crct10dif_generic raid6_pq libcrc32c crc32c_generic raid1 raid0 multipath linear md_mod ahci libahci tg3 libata xhci_pci libphy xhci_hcd ptp usbcore crct10dif_pclmul crct10dif_common bnxt_en crc32c_intel scsi_mod [709732.358941] pps_core i2c_i801 lpc_ich i2c_smbus wmi usb_common [709732.358957] CPU: 3 PID: 456 Comm: jbd2/dm-0-8 Not tainted 5.10.0-0.bpo.5-amd64 #1 Debian 5.10.24-1~bpo10+1 [709732.358959] Hardware name: Dell Inc. PowerEdge R440/04JN2K, BIOS 2.9.3 09/23/2020 [709732.358964] RIP: 0010:kernel_fpu_begin_mask+0xae/0xe0 [709732.358969] Code: ae 54 24 04 83 e3 01 75 38 48 8b 44 24 08 65 48 33 04 25 28 00 00 00 75 33 48 83 c4 10 5b c3 65 8a 05 5e 21 5e 76 84 c0 74 92 <0f> 0b eb 8e f0 80 4f 01 40 48 81 c7 00 14 00 00 e8 dd fb ff ff eb [709732.358972] RSP: 0018:ffffbb9700304740 EFLAGS: 00010202 [709732.358976] RAX: 0000000000000001 RBX: 0000000000000003 RCX: 0000000000000001 [709732.358979] RDX: ffffbb9700304970 RSI: ffff922fe1952e00 RDI: 0000000000000003 [709732.358981] RBP: ffffbb9700304970 R08: ffff922fc868a600 R09: ffff922fc711e462 [709732.358984] R10: 000000000000005f R11: ffff922ff0b27180 R12: ffffbb9700304960 [709732.358987] R13: ffffbb9700304b08 R14: ffff922fc664b6c8 R15: ffff922fc664b660 [709732.358990] FS: 0000000000000000(0000) GS:ffff92371fec0000(0000) knlGS:0000000000000000 [709732.358993] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [709732.358996] CR2: 0000557a6655bdd0 CR3: 000000026020a001 CR4: 00000000007706e0 [709732.358999] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [709732.359001] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [709732.359003] PKRU: 55555554 [709732.359005] Call Trace: [709732.359009] <IRQ> [709732.359035] nft_pipapo_avx2_lookup+0x4c/0x1cba [nf_tables] [709732.359046] ? sched_clock+0x5/0x10 [709732.359054] ? sched_clock_cpu+0xc/0xb0 [709732.359061] ? record_times+0x16/0x80 [709732.359068] ? plist_add+0xc1/0x100 [709732.359073] ? psi_group_change+0x47/0x230 [709732.359079] ? skb_clone+0x4d/0xb0 [709732.359085] ? enqueue_task_rt+0x22b/0x310 [709732.359098] ? bnxt_start_xmit+0x1e8/0xaf0 [bnxt_en] [709732.359102] ? packet_rcv+0x40/0x4a0 [709732.359121] nft_lookup_eval+0x59/0x160 [nf_tables] [709732.359133] nft_do_chain+0x350/0x500 [nf_tables] [709732.359152] ? nft_lookup_eval+0x59/0x160 [nf_tables] [709732.359163] ? nft_do_chain+0x364/0x500 [nf_tables] [709732.359172] ? fib4_rule_action+0x6d/0x80 [709732.359178] ? fib_rules_lookup+0x107/0x250 [709732.359184] nft_nat_do_chain+0x8a/0xf2 [nft_chain_nat] [709732.359193] nf_nat_inet_fn+0xea/0x210 [nf_nat] [709732.359202] nf_nat_ipv4_out+0x14/0xa0 [nf_nat] [709732.359207] nf_hook_slow+0x44/0xc0 [709732.359214] ip_output+0xd2/0x100 [709732.359221] ? __ip_finish_output+0x210/0x210 [709732.359226] ip_forward+0x37d/0x4a0 [709732.359232] ? ip4_key_hashfn+0xb0/0xb0 [709732.359238] ip_subli ---truncated---

In the Linux kernel, the following vulnerability has been resolved: mm/hwpoison: clear MF_COUNT_INCREASED before retrying get_any_page() Hulk Robot reported a panic in put_page_testzero() when testing madvise() with MADV_SOFT_OFFLINE. The BUG() is triggered when retrying get_any_page(). This is because we keep MF_COUNT_INCREASED flag in second try but the refcnt is not increased. page dumped because: VM_BUG_ON_PAGE(page_ref_count(page) == 0) ------------[ cut here ]------------ kernel BUG at include/linux/mm.h:737! invalid opcode: 0000 [#1] PREEMPT SMP CPU: 5 PID: 2135 Comm: sshd Tainted: G B 5.16.0-rc6-dirty #373 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 RIP: release_pages+0x53f/0x840 Call Trace: free_pages_and_swap_cache+0x64/0x80 tlb_flush_mmu+0x6f/0x220 unmap_page_range+0xe6c/0x12c0 unmap_single_vma+0x90/0x170 unmap_vmas+0xc4/0x180 exit_mmap+0xde/0x3a0 mmput+0xa3/0x250 do_exit+0x564/0x1470 do_group_exit+0x3b/0x100 __do_sys_exit_group+0x13/0x20 __x64_sys_exit_group+0x16/0x20 do_syscall_64+0x34/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae Modules linked in: ---[ end trace e99579b570fe0649 ]--- RIP: 0010:release_pages+0x53f/0x840

In the Linux kernel, the following vulnerability has been resolved: cifs: Fix soft lockup during fsstress Below traces are observed during fsstress and system got hung. [ 130.698396] watchdog: BUG: soft lockup - CPU#6 stuck for 26s!

In the Linux kernel, the following vulnerability has been resolved: jfs: fix GPF in diFree Avoid passing inode with JFS_SBI(inode->i_sb)->ipimap == NULL to diFree()[1]. GFP will appear: struct inode *ipimap = JFS_SBI(ip->i_sb)->ipimap; struct inomap *imap = JFS_IP(ipimap)->i_imap; JFS_IP() will return invalid pointer when ipimap == NULL Call Trace: diFree+0x13d/0x2dc0 fs/jfs/jfs_imap.c:853 [1] jfs_evict_inode+0x2c9/0x370 fs/jfs/inode.c:154 evict+0x2ed/0x750 fs/inode.c:578 iput_final fs/inode.c:1654 [inline] iput.part.0+0x3fe/0x820 fs/inode.c:1680 iput+0x58/0x70 fs/inode.c:1670

In the Linux kernel, the following vulnerability has been resolved: selinux: fix NULL-pointer dereference when hashtab allocation fails When the hash table slot array allocation fails in hashtab_init(), h->size is left initialized with a non-zero value, but the h->htable pointer is NULL. This may then cause a NULL pointer dereference, since the policydb code relies on the assumption that even after a failed hashtab_init(), hashtab_map() and hashtab_destroy() can be safely called on it. Yet, these detect an empty hashtab only by looking at the size. Fix this by making sure that hashtab_init() always leaves behind a valid empty hashtab when the allocation fails.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: kTLS, Fix crash in RX resync flow For the TLS RX resync flow, we maintain a list of TLS contexts that require some attention, to communicate their resync information to the HW. Here we fix list corruptions, by protecting the entries against movements coming from resync_handle_seq_match(), until their resync handling in napi is fully completed.

In the Linux kernel, the following vulnerability has been resolved: ARM: 9063/1: mm: reduce maximum number of CPUs if DEBUG_KMAP_LOCAL is enabled The debugging code for kmap_local() doubles the number of per-CPU fixmap slots allocated for kmap_local(), in order to use half of them as guard regions. This causes the fixmap region to grow downwards beyond the start of its reserved window if the supported number of CPUs is large, and collide with the newly added virtual DT mapping right below it, which is obviously not good. One manifestation of this is EFI boot on a kernel built with NR_CPUS=32 and CONFIG_DEBUG_KMAP_LOCAL=y, which may pass the FDT in highmem, resulting in block entries below the fixmap region that the fixmap code misidentifies as fixmap table entries, and subsequently tries to dereference using a phys-to-virt translation that is only valid for lowmem. This results in a cryptic splat such as the one below. ftrace: allocating 45548 entries in 89 pages 8<--- cut here --- Unable to handle kernel paging request at virtual address fc6006f0 pgd = (ptrval) [fc6006f0] *pgd=80000040207003, *pmd=00000000 Internal error: Oops: a06 [#1] SMP ARM Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 5.11.0+ #382 Hardware name: Generic DT based system PC is at cpu_ca15_set_pte_ext+0x24/0x30 LR is at __set_fixmap+0xe4/0x118 pc : [<c041ac9c>] lr : [<c04189d8>] psr: 400000d3 sp : c1601ed8 ip : 00400000 fp : 00800000 r10: 0000071f r9 : 00421000 r8 : 00c00000 r7 : 00c00000 r6 : 0000071f r5 : ffade000 r4 : 4040171f r3 : 00c00000 r2 : 4040171f r1 : c041ac78 r0 : fc6006f0 Flags: nZcv IRQs off FIQs off Mode SVC_32 ISA ARM Segment none Control: 30c5387d Table: 40203000 DAC: 00000001 Process swapper (pid: 0, stack limit = 0x(ptrval)) So let's limit CONFIG_NR_CPUS to 16 when CONFIG_DEBUG_KMAP_LOCAL=y. Also, fix the BUILD_BUG_ON() check that was supposed to catch this, by checking whether the region grows below the start address rather than above the end address.

In the Linux kernel, the following vulnerability has been resolved: NFSv4: Fix a NULL pointer dereference in pnfs_mark_matching_lsegs_return() Commit de144ff4234f changes _pnfs_return_layout() to call pnfs_mark_matching_lsegs_return() passing NULL as the struct pnfs_layout_range argument. Unfortunately, pnfs_mark_matching_lsegs_return() doesn't check if we have a value here before dereferencing it, causing an oops. I'm able to hit this crash consistently when running connectathon basic tests on NFS v4.1/v4.2 against Ontap.

In the Linux kernel, the following vulnerability has been resolved: async_xor: increase src_offs when dropping destination page Now we support sharing one page if PAGE_SIZE is not equal stripe size. To support this, it needs to support calculating xor value with different offsets for each r5dev. One offset array is used to record those offsets. In RMW mode, parity page is used as a source page. It sets ASYNC_TX_XOR_DROP_DST before calculating xor value in ops_run_prexor5. So it needs to add src_list and src_offs at the same time. Now it only needs src_list. So the xor value which is calculated is wrong. It can cause data corruption problem. I can reproduce this problem 100% on a POWER8 machine. The steps are: mdadm -CR /dev/md0 -l5 -n3 /dev/sdb1 /dev/sdc1 /dev/sdd1 --size=3G mkfs.xfs /dev/md0 mount /dev/md0 /mnt/test mount: /mnt/test: mount(2) system call failed: Structure needs cleaning.

In the Linux kernel, the following vulnerability has been resolved: mptcp: ensure tx skbs always have the MPTCP ext Due to signed/unsigned comparison, the expression: info->size_goal - skb->len > 0 evaluates to true when the size goal is smaller than the skb size. That results in lack of tx cache refill, so that the skb allocated by the core TCP code lacks the required MPTCP skb extensions. Due to the above, syzbot is able to trigger the following WARN_ON(): WARNING: CPU: 1 PID: 810 at net/mptcp/protocol.c:1366 mptcp_sendmsg_frag+0x1362/0x1bc0 net/mptcp/protocol.c:1366 Modules linked in: CPU: 1 PID: 810 Comm: syz-executor.4 Not tainted 5.14.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:mptcp_sendmsg_frag+0x1362/0x1bc0 net/mptcp/protocol.c:1366 Code: ff 4c 8b 74 24 50 48 8b 5c 24 58 e9 0f fb ff ff e8 13 44 8b f8 4c 89 e7 45 31 ed e8 98 57 2e fe e9 81 f4 ff ff e8 fe 43 8b f8 <0f> 0b 41 bd ea ff ff ff e9 6f f4 ff ff 4c 89 e7 e8 b9 8e d2 f8 e9 RSP: 0018:ffffc9000531f6a0 EFLAGS: 00010216 RAX: 000000000000697f RBX: 0000000000000000 RCX: ffffc90012107000 RDX: 0000000000040000 RSI: ffffffff88eac9e2 RDI: 0000000000000003 RBP: ffff888078b15780 R08: 0000000000000000 R09: 0000000000000000 R10: ffffffff88eac017 R11: 0000000000000000 R12: ffff88801de0a280 R13: 0000000000006b58 R14: ffff888066278280 R15: ffff88803c2fe9c0 FS: 00007fd9f866e700(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007faebcb2f718 CR3: 00000000267cb000 CR4: 00000000001506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __mptcp_push_pending+0x1fb/0x6b0 net/mptcp/protocol.c:1547 mptcp_release_cb+0xfe/0x210 net/mptcp/protocol.c:3003 release_sock+0xb4/0x1b0 net/core/sock.c:3206 sk_stream_wait_memory+0x604/0xed0 net/core/stream.c:145 mptcp_sendmsg+0xc39/0x1bc0 net/mptcp/protocol.c:1749 inet6_sendmsg+0x99/0xe0 net/ipv6/af_inet6.c:643 sock_sendmsg_nosec net/socket.c:704 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:724 sock_write_iter+0x2a0/0x3e0 net/socket.c:1057 call_write_iter include/linux/fs.h:2163 [inline] new_sync_write+0x40b/0x640 fs/read_write.c:507 vfs_write+0x7cf/0xae0 fs/read_write.c:594 ksys_write+0x1ee/0x250 fs/read_write.c:647 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x4665f9 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fd9f866e188 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 000000000056c038 RCX: 00000000004665f9 RDX: 00000000000e7b78 RSI: 0000000020000000 RDI: 0000000000000003 RBP: 00000000004bfcc4 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 000000000056c038 R13: 0000000000a9fb1f R14: 00007fd9f866e300 R15: 0000000000022000 Fix the issue rewriting the relevant expression to avoid sign-related problems - note: size_goal is always >= 0. Additionally, ensure that the skb in the tx cache always carries the relevant extension.

In the Linux kernel, the following vulnerability has been resolved: ext4: fix bug on in ext4_es_cache_extent as ext4_split_extent_at failed We got follow bug_on when run fsstress with injecting IO fault: [130747.323114] kernel BUG at fs/ext4/extents_status.c:762! [130747.323117] Internal error: Oops - BUG: 0 [#1] SMP ...... [130747.334329] Call trace: [130747.334553] ext4_es_cache_extent+0x150/0x168 [ext4] [130747.334975] ext4_cache_extents+0x64/0xe8 [ext4] [130747.335368] ext4_find_extent+0x300/0x330 [ext4] [130747.335759] ext4_ext_map_blocks+0x74/0x1178 [ext4] [130747.336179] ext4_map_blocks+0x2f4/0x5f0 [ext4] [130747.336567] ext4_mpage_readpages+0x4a8/0x7a8 [ext4] [130747.336995] ext4_readpage+0x54/0x100 [ext4] [130747.337359] generic_file_buffered_read+0x410/0xae8 [130747.337767] generic_file_read_iter+0x114/0x190 [130747.338152] ext4_file_read_iter+0x5c/0x140 [ext4] [130747.338556] __vfs_read+0x11c/0x188 [130747.338851] vfs_read+0x94/0x150 [130747.339110] ksys_read+0x74/0xf0 This patch's modification is according to Jan Kara's suggestion in: https://patchwork.ozlabs.org/project/linux-ext4/patch/20210428085158.3728201-1-yebin10@huawei.com/ "I see. Now I understand your patch. Honestly, seeing how fragile is trying to fix extent tree after split has failed in the middle, I would probably go even further and make sure we fix the tree properly in case of ENOSPC and EDQUOT (those are easily user triggerable). Anything else indicates a HW problem or fs corruption so I'd rather leave the extent tree as is and don't try to fix it (which also means we will not create overlapping extents)."

In the Linux kernel, the following vulnerability has been resolved: irqchip/gic-v3-its: Fix potential VPE leak on error In its_vpe_irq_domain_alloc, when its_vpe_init() returns an error, there is an off-by-one in the number of VPEs to be freed. Fix it by simply passing the number of VPEs allocated, which is the index of the loop iterating over the VPEs. [maz: fixed commit message]

In the Linux kernel, the following vulnerability has been resolved: ubifs: Fix races between xattr_{set|get} and listxattr operations UBIFS may occur some problems with concurrent xattr_{set|get} and listxattr operations, such as assertion failure, memory corruption, stale xattr value[1]. Fix it by importing a new rw-lock in @ubifs_inode to serilize write operations on xattr, concurrent read operations are still effective, just like ext4. [1] https://lore.kernel.org/linux-mtd/20200630130438.141649-1-houtao1@huawei.com

In the Linux kernel, the following vulnerability has been resolved: sch_htb: fix refcount leak in htb_parent_to_leaf_offload The commit ae81feb7338c ("sch_htb: fix null pointer dereference on a null new_q") fixes a NULL pointer dereference bug, but it is not correct. Because htb_graft_helper properly handles the case when new_q is NULL, and after the previous patch by skipping this call which creates an inconsistency : dev_queue->qdisc will still point to the old qdisc, but cl->parent->leaf.q will point to the new one (which will be noop_qdisc, because new_q was NULL). The code is based on an assumption that these two pointers are the same, so it can lead to refcount leaks. The correct fix is to add a NULL pointer check to protect qdisc_refcount_inc inside htb_parent_to_leaf_offload.

In the Linux kernel, the following vulnerability has been resolved: memory: fsl_ifc: fix leak of private memory on probe failure On probe error the driver should free the memory allocated for private structure. Fix this by using resource-managed allocation.

In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Use online_vcpus, not created_vcpus, to iterate over vCPUs Use the kvm_for_each_vcpu() helper to iterate over vCPUs when encrypting VMSAs for SEV, which effectively switches to use online_vcpus instead of created_vcpus. This fixes a possible null-pointer dereference as created_vcpus does not guarantee a vCPU exists, since it is updated at the very beginning of KVM_CREATE_VCPU. created_vcpus exists to allow the bulk of vCPU creation to run in parallel, while still correctly restricting the max number of max vCPUs.

In the Linux kernel, the following vulnerability has been resolved: driver core: auxiliary bus: Fix memory leak when driver_register() fail If driver_register() returns with error we need to free the memory allocated for auxdrv->driver.name before returning from __auxiliary_driver_register()

In the Linux kernel, the following vulnerability has been resolved: afs: Fix page leak There's a loop in afs_extend_writeback() that adds extra pages to a write we want to make to improve the efficiency of the writeback by making it larger. This loop stops, however, if we hit a page we can't write back from immediately, but it doesn't get rid of the page ref we speculatively acquired. This was caused by the removal of the cleanup loop when the code switched from using find_get_pages_contig() to xarray scanning as the latter only gets a single page at a time, not a batch. Fix this by putting the page on a ref on an early break from the loop. Unfortunately, we can't just add that page to the pagevec we're employing as we'll go through that and add those pages to the RPC call. This was found by the generic/074 test. It leaks ~4GiB of RAM each time it is run - which can be observed with "top".

In the Linux kernel, the following vulnerability has been resolved: mt76: mt7921: fix kernel crash when the firmware fails to download Fix kernel crash when the firmware is missing or fails to download. [ 9.444758] kernel BUG at drivers/pci/msi.c:375! [ 9.449363] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 9.501033] pstate: a0400009 (NzCv daif +PAN -UAO) [ 9.505814] pc : free_msi_irqs+0x180/0x184 [ 9.509897] lr : free_msi_irqs+0x40/0x184 [ 9.513893] sp : ffffffc015193870 [ 9.517194] x29: ffffffc015193870 x28: 00000000f0e94fa2 [ 9.522492] x27: 0000000000000acd x26: 000000000000009a [ 9.527790] x25: ffffffc0152cee58 x24: ffffffdbb383e0d8 [ 9.533087] x23: ffffffdbb38628d0 x22: 0000000000040200 [ 9.538384] x21: ffffff8cf7de7318 x20: ffffff8cd65a2480 [ 9.543681] x19: ffffff8cf7de7000 x18: 0000000000000000 [ 9.548979] x17: ffffff8cf9ca03b4 x16: ffffffdc13ad9a34 [ 9.554277] x15: 0000000000000000 x14: 0000000000080800 [ 9.559575] x13: ffffff8cd65a2980 x12: 0000000000000000 [ 9.564873] x11: ffffff8cfa45d820 x10: ffffff8cfa45d6d0 [ 9.570171] x9 : 0000000000000040 x8 : ffffff8ccef1b780 [ 9.575469] x7 : aaaaaaaaaaaaaaaa x6 : 0000000000000000 [ 9.580766] x5 : ffffffdc13824900 x4 : ffffff8ccefe0000 [ 9.586063] x3 : 0000000000000000 x2 : 0000000000000000 [ 9.591362] x1 : 0000000000000125 x0 : ffffff8ccefe0000 [ 9.596660] Call trace: [ 9.599095] free_msi_irqs+0x180/0x184 [ 9.602831] pci_disable_msi+0x100/0x130 [ 9.606740] pci_free_irq_vectors+0x24/0x30 [ 9.610915] mt7921_pci_probe+0xbc/0x250 [mt7921e] [ 9.615693] pci_device_probe+0xd4/0x14c [ 9.619604] really_probe+0x134/0x2ec [ 9.623252] driver_probe_device+0x64/0xfc [ 9.627335] device_driver_attach+0x4c/0x6c [ 9.631506] __driver_attach+0xac/0xc0 [ 9.635243] bus_for_each_dev+0x8c/0xd4 [ 9.639066] driver_attach+0x2c/0x38 [ 9.642628] bus_add_driver+0xfc/0x1d0 [ 9.646365] driver_register+0x64/0xf8 [ 9.650101] __pci_register_driver+0x6c/0x7c [ 9.654360] init_module+0x28/0xfdc [mt7921e] [ 9.658704] do_one_initcall+0x13c/0x2d0 [ 9.662615] do_init_module+0x58/0x1e8 [ 9.666351] load_module+0xd80/0xeb4 [ 9.669912] __arm64_sys_finit_module+0xa8/0xe0 [ 9.674430] el0_svc_common+0xa4/0x16c [ 9.678168] el0_svc_compat_handler+0x2c/0x40 [ 9.682511] el0_svc_compat+0x8/0x10 [ 9.686076] Code: a94257f6 f9400bf7 a8c47bfd d65f03c0 (d4210000) [ 9.692155] ---[ end trace 7621f966afbf0a29 ]--- [ 9.697385] Kernel panic - not syncing: Fatal exception [ 9.702599] SMP: stopping secondary CPUs [ 9.706549] Kernel Offset: 0x1c03600000 from 0xffffffc010000000 [ 9.712456] PHYS_OFFSET: 0xfffffff440000000 [ 9.716625] CPU features: 0x080026,2a80aa18 [ 9.720795] Memory Limit: none

In the Linux kernel, the following vulnerability has been resolved: efi/fdt: fix panic when no valid fdt found setup_arch() would invoke efi_init()->efi_get_fdt_params(). If no valid fdt found then initial_boot_params will be null. So we should stop further fdt processing here. I encountered this issue on risc-v.

In the Linux kernel, the following vulnerability has been resolved: misc/uss720: fix memory leak in uss720_probe uss720_probe forgets to decrease the refcount of usbdev in uss720_probe. Fix this by decreasing the refcount of usbdev by usb_put_dev. BUG: memory leak unreferenced object 0xffff888101113800 (size 2048): comm "kworker/0:1", pid 7, jiffies 4294956777 (age 28.870s) hex dump (first 32 bytes): ff ff ff ff 31 00 00 00 00 00 00 00 00 00 00 00 ....1........... 00 00 00 00 00 00 00 00 00 00 00 00 03 00 00 00 ................ backtrace: [<ffffffff82b8e822>] kmalloc include/linux/slab.h:554 [inline] [<ffffffff82b8e822>] kzalloc include/linux/slab.h:684 [inline] [<ffffffff82b8e822>] usb_alloc_dev+0x32/0x450 drivers/usb/core/usb.c:582 [<ffffffff82b98441>] hub_port_connect drivers/usb/core/hub.c:5129 [inline] [<ffffffff82b98441>] hub_port_connect_change drivers/usb/core/hub.c:5363 [inline] [<ffffffff82b98441>] port_event drivers/usb/core/hub.c:5509 [inline] [<ffffffff82b98441>] hub_event+0x1171/0x20c0 drivers/usb/core/hub.c:5591 [<ffffffff81259229>] process_one_work+0x2c9/0x600 kernel/workqueue.c:2275 [<ffffffff81259b19>] worker_thread+0x59/0x5d0 kernel/workqueue.c:2421 [<ffffffff81261228>] kthread+0x178/0x1b0 kernel/kthread.c:292 [<ffffffff8100227f>] ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:294

In the Linux kernel, the following vulnerability has been resolved: udp: skip L4 aggregation for UDP tunnel packets If NETIF_F_GRO_FRAGLIST or NETIF_F_GRO_UDP_FWD are enabled, and there are UDP tunnels available in the system, udp_gro_receive() could end-up doing L4 aggregation (either SKB_GSO_UDP_L4 or SKB_GSO_FRAGLIST) at the outer UDP tunnel level for packets effectively carrying and UDP tunnel header. That could cause inner protocol corruption. If e.g. the relevant packets carry a vxlan header, different vxlan ids will be ignored/ aggregated to the same GSO packet. Inner headers will be ignored, too, so that e.g. TCP over vxlan push packets will be held in the GRO engine till the next flush, etc. Just skip the SKB_GSO_UDP_L4 and SKB_GSO_FRAGLIST code path if the current packet could land in a UDP tunnel, and let udp_gro_receive() do GRO via udp_sk(sk)->gro_receive. The check implemented in this patch is broader than what is strictly needed, as the existing UDP tunnel could be e.g. configured on top of a different device: we could end-up skipping GRO at-all for some packets. Anyhow, that is a very thin corner case and covering it will add quite a bit of complexity. v1 -> v2: - hopefully clarify the commit message

In the Linux kernel, the following vulnerability has been resolved: nbd: Fix NULL pointer in flush_workqueue Open /dev/nbdX first, the config_refs will be 1 and the pointers in nbd_device are still null. Disconnect /dev/nbdX, then reference a null recv_workq. The protection by config_refs in nbd_genl_disconnect is useless. [ 656.366194] BUG: kernel NULL pointer dereference, address: 0000000000000020 [ 656.368943] #PF: supervisor write access in kernel mode [ 656.369844] #PF: error_code(0x0002) - not-present page [ 656.370717] PGD 10cc87067 P4D 10cc87067 PUD 1074b4067 PMD 0 [ 656.371693] Oops: 0002 [#1] SMP [ 656.372242] CPU: 5 PID: 7977 Comm: nbd-client Not tainted 5.11.0-rc5-00040-g76c057c84d28 #1 [ 656.373661] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_073836-buildvm-ppc64le-16.ppc.fedoraproject.org-3.fc31 04/01/2014 [ 656.375904] RIP: 0010:mutex_lock+0x29/0x60 [ 656.376627] Code: 00 0f 1f 44 00 00 55 48 89 fd 48 83 05 6f d7 fe 08 01 e8 7a c3 ff ff 48 83 05 6a d7 fe 08 01 31 c0 65 48 8b 14 25 00 6d 01 00 <f0> 48 0f b1 55 d [ 656.378934] RSP: 0018:ffffc900005eb9b0 EFLAGS: 00010246 [ 656.379350] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 656.379915] RDX: ffff888104cf2600 RSI: ffffffffaae8f452 RDI: 0000000000000020 [ 656.380473] RBP: 0000000000000020 R08: 0000000000000000 R09: ffff88813bd6b318 [ 656.381039] R10: 00000000000000c7 R11: fefefefefefefeff R12: ffff888102710b40 [ 656.381599] R13: ffffc900005eb9e0 R14: ffffffffb2930680 R15: ffff88810770ef00 [ 656.382166] FS: 00007fdf117ebb40(0000) GS:ffff88813bd40000(0000) knlGS:0000000000000000 [ 656.382806] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 656.383261] CR2: 0000000000000020 CR3: 0000000100c84000 CR4: 00000000000006e0 [ 656.383819] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 656.384370] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 656.384927] Call Trace: [ 656.385111] flush_workqueue+0x92/0x6c0 [ 656.385395] nbd_disconnect_and_put+0x81/0xd0 [ 656.385716] nbd_genl_disconnect+0x125/0x2a0 [ 656.386034] genl_family_rcv_msg_doit.isra.0+0x102/0x1b0 [ 656.386422] genl_rcv_msg+0xfc/0x2b0 [ 656.386685] ? nbd_ioctl+0x490/0x490 [ 656.386954] ? genl_family_rcv_msg_doit.isra.0+0x1b0/0x1b0 [ 656.387354] netlink_rcv_skb+0x62/0x180 [ 656.387638] genl_rcv+0x34/0x60 [ 656.387874] netlink_unicast+0x26d/0x590 [ 656.388162] netlink_sendmsg+0x398/0x6c0 [ 656.388451] ? netlink_rcv_skb+0x180/0x180 [ 656.388750] ____sys_sendmsg+0x1da/0x320 [ 656.389038] ? ____sys_recvmsg+0x130/0x220 [ 656.389334] ___sys_sendmsg+0x8e/0xf0 [ 656.389605] ? ___sys_recvmsg+0xa2/0xf0 [ 656.389889] ? handle_mm_fault+0x1671/0x21d0 [ 656.390201] __sys_sendmsg+0x6d/0xe0 [ 656.390464] __x64_sys_sendmsg+0x23/0x30 [ 656.390751] do_syscall_64+0x45/0x70 [ 656.391017] entry_SYSCALL_64_after_hwframe+0x44/0xa9 To fix it, just add if (nbd->recv_workq) to nbd_disconnect_and_put().

In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Prevent divide-by-zero error triggered by the user The user_entry_size is supplied by the user and later used as a denominator to calculate number of entries. The zero supplied by the user will trigger the following divide-by-zero error: divide error: 0000 [#1] SMP KASAN PTI CPU: 4 PID: 497 Comm: c_repro Not tainted 5.13.0-rc1+ #281 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:ib_uverbs_handler_UVERBS_METHOD_QUERY_GID_TABLE+0x1b1/0x510 Code: 87 59 03 00 00 e8 9f ab 1e ff 48 8d bd a8 00 00 00 e8 d3 70 41 ff 44 0f b7 b5 a8 00 00 00 e8 86 ab 1e ff 31 d2 4c 89 f0 31 ff <49> f7 f5 48 89 d6 48 89 54 24 10 48 89 04 24 e8 1b ad 1e ff 48 8b RSP: 0018:ffff88810416f828 EFLAGS: 00010246 RAX: 0000000000000008 RBX: 1ffff1102082df09 RCX: ffffffff82183f3d RDX: 0000000000000000 RSI: ffff888105f2da00 RDI: 0000000000000000 RBP: ffff88810416fa98 R08: 0000000000000001 R09: ffffed102082df5f R10: ffff88810416faf7 R11: ffffed102082df5e R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000008 R15: ffff88810416faf0 FS: 00007f5715efa740(0000) GS:ffff88811a700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000840 CR3: 000000010c2e0001 CR4: 0000000000370ea0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ? ib_uverbs_handler_UVERBS_METHOD_INFO_HANDLES+0x4b0/0x4b0 ib_uverbs_cmd_verbs+0x1546/0x1940 ib_uverbs_ioctl+0x186/0x240 __x64_sys_ioctl+0x38a/0x1220 do_syscall_64+0x3f/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae

In the Linux kernel, the following vulnerability has been resolved: powerpc/64s: Fix unrecoverable MCE calling async handler from NMI The machine check handler is not considered NMI on 64s. The early handler is the true NMI handler, and then it schedules the machine_check_exception handler to run when interrupts are enabled. This works fine except the case of an unrecoverable MCE, where the true NMI is taken when MSR[RI] is clear, it can not recover, so it calls machine_check_exception directly so something might be done about it. Calling an async handler from NMI context can result in irq state and other things getting corrupted. This can also trigger the BUG at arch/powerpc/include/asm/interrupt.h:168 BUG_ON(!arch_irq_disabled_regs(regs) && !(regs->msr & MSR_EE)); Fix this by making an _async version of the handler which is called in the normal case, and a NMI version that is called for unrecoverable interrupts.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_limit: avoid possible divide error in nft_limit_init div_u64() divides u64 by u32. nft_limit_init() wants to divide u64 by u64, use the appropriate math function (div64_u64) divide error: 0000 [#1] PREEMPT SMP KASAN CPU: 1 PID: 8390 Comm: syz-executor188 Not tainted 5.12.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:div_u64_rem include/linux/math64.h:28 [inline] RIP: 0010:div_u64 include/linux/math64.h:127 [inline] RIP: 0010:nft_limit_init+0x2a2/0x5e0 net/netfilter/nft_limit.c:85 Code: ef 4c 01 eb 41 0f 92 c7 48 89 de e8 38 a5 22 fa 4d 85 ff 0f 85 97 02 00 00 e8 ea 9e 22 fa 4c 0f af f3 45 89 ed 31 d2 4c 89 f0 <49> f7 f5 49 89 c6 e8 d3 9e 22 fa 48 8d 7d 48 48 b8 00 00 00 00 00 RSP: 0018:ffffc90009447198 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000200000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff875152e6 RDI: 0000000000000003 RBP: ffff888020f80908 R08: 0000200000000000 R09: 0000000000000000 R10: ffffffff875152d8 R11: 0000000000000000 R12: ffffc90009447270 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 FS: 000000000097a300(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000200001c4 CR3: 0000000026a52000 CR4: 00000000001506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: nf_tables_newexpr net/netfilter/nf_tables_api.c:2675 [inline] nft_expr_init+0x145/0x2d0 net/netfilter/nf_tables_api.c:2713 nft_set_elem_expr_alloc+0x27/0x280 net/netfilter/nf_tables_api.c:5160 nf_tables_newset+0x1997/0x3150 net/netfilter/nf_tables_api.c:4321 nfnetlink_rcv_batch+0x85a/0x21b0 net/netfilter/nfnetlink.c:456 nfnetlink_rcv_skb_batch net/netfilter/nfnetlink.c:580 [inline] nfnetlink_rcv+0x3af/0x420 net/netfilter/nfnetlink.c:598 netlink_unicast_kernel net/netlink/af_netlink.c:1312 [inline] netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1338 netlink_sendmsg+0x856/0xd90 net/netlink/af_netlink.c:1927 sock_sendmsg_nosec net/socket.c:654 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:674 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2350 ___sys_sendmsg+0xf3/0x170 net/socket.c:2404 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2433 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xae

In the Linux kernel, the following vulnerability has been resolved: usb: cdnsp: Fix a NULL pointer dereference in cdnsp_endpoint_init() In cdnsp_endpoint_init(), cdnsp_ring_alloc() is assigned to pep->ring and there is a dereference of it in cdnsp_endpoint_init(), which could lead to a NULL pointer dereference on failure of cdnsp_ring_alloc(). Fix this bug by adding a check of pep->ring. This bug was found by a static analyzer. The analysis employs differential checking to identify inconsistent security operations (e.g., checks or kfrees) between two code paths and confirms that the inconsistent operations are not recovered in the current function or the callers, so they constitute bugs. Note that, as a bug found by static analysis, it can be a false positive or hard to trigger. Multiple researchers have cross-reviewed the bug. Builds with CONFIG_USB_CDNSP_GADGET=y show no new warnings, and our static analyzer no longer warns about this code.

In the Linux kernel, the following vulnerability has been resolved: i40e: Fix NULL ptr dereference on VSI filter sync Remove the reason of null pointer dereference in sync VSI filters. Added new I40E_VSI_RELEASING flag to signalize deleting and releasing of VSI resources to sync this thread with sync filters subtask. Without this patch it is possible to start update the VSI filter list after VSI is removed, that's causing a kernel oops.

In the Linux kernel, the following vulnerability has been resolved: net: fujitsu: fix potential null-ptr-deref In fmvj18x_get_hwinfo(), if ioremap fails there will be NULL pointer deref. To fix this, check the return value of ioremap and return -1 to the caller in case of failure.

In the Linux kernel, the following vulnerability has been resolved: virtio-blk: Fix memory leak among suspend/resume procedure The vblk->vqs should be freed before we call init_vqs() in virtblk_restore().

In the Linux kernel, the following vulnerability has been resolved: iavf: free q_vectors before queues in iavf_disable_vf iavf_free_queues() clears adapter->num_active_queues, which iavf_free_q_vectors() relies on, so swap the order of these two function calls in iavf_disable_vf(). This resolves a panic encountered when the interface is disabled and then later brought up again after PF communication is restored.

In the Linux kernel, the following vulnerability has been resolved: i2c: acpi: fix resource leak in reconfiguration device addition acpi_i2c_find_adapter_by_handle() calls bus_find_device() which takes a reference on the adapter which is never released which will result in a reference count leak and render the adapter unremovable. Make sure to put the adapter after creating the client in the same manner that we do for OF. [wsa: fixed title]

In the Linux kernel, the following vulnerability has been resolved: ftrace: Do not blindly read the ip address in ftrace_bug() It was reported that a bug on arm64 caused a bad ip address to be used for updating into a nop in ftrace_init(), but the error path (rightfully) returned -EINVAL and not -EFAULT, as the bug caused more than one error to occur. But because -EINVAL was returned, the ftrace_bug() tried to report what was at the location of the ip address, and read it directly. This caused the machine to panic, as the ip was not pointing to a valid memory address. Instead, read the ip address with copy_from_kernel_nofault() to safely access the memory, and if it faults, report that the address faulted, otherwise report what was in that location.

In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: fix wq size store permission state WQ size can only be changed when the device is disabled. Current code allows change when device is enabled but wq is disabled. Change the check to detect device state.

In the Linux kernel, the following vulnerability has been resolved: NFS: fix an incorrect limit in filelayout_decode_layout() The "sizeof(struct nfs_fh)" is two bytes too large and could lead to memory corruption. It should be NFS_MAXFHSIZE because that's the size of the ->data[] buffer. I reversed the size of the arguments to put the variable on the left.

NVIDIA GPU Display Driver for Windows and Linux contains a vulnerability in the kernel mode layer, where a NULL-pointer dereference may lead to denial of service.