In the Linux kernel, the following vulnerability has been resolved: fs/adfs: validate nzones in adfs_validate_bblk() Reject ADFS disc records with a zero zone count during boot block validation, before the disc record is used. When nzones is 0, adfs_read_map() passes it to kmalloc_array(0, ...) which returns ZERO_SIZE_PTR, and adfs_map_layout() then writes to dm[-1], causing an out-of-bounds write before the allocated buffer. adfs_validate_dr0() already rejects nzones != 1 for old-format images. Add the equivalent check to adfs_validate_bblk() for new-format images so that a crafted image with nzones == 0 is rejected at probe time. Found by syzkaller.

In the Linux kernel, the following vulnerability has been resolved: crypto: ccp - copy IV using skcipher ivsize AF_ALG rfc3686-ctr-aes-ccp requests pass an 8-byte IV to the driver. ccp_aes_complete() restores AES_BLOCK_SIZE bytes into the caller's IV buffer while RFC3686 skciphers expose an 8-byte IV, so the restore overruns the provided buffer. Use crypto_skcipher_ivsize() to copy only the algorithm's IV length.

In the Linux kernel, the following vulnerability has been resolved: nvmem: core: fix use-after-free bugs in error paths Fix several instances of error paths in which we call __nvmem_device_put() - which may end up freeing the underlying memory and other resources - and then keep on using the nvmem structure. Always put the reference to the nvmem device as the last step before returning the error code.

In the Linux kernel, the following vulnerability has been resolved: Revert "drm/xe: Skip exec queue schedule toggle if queue is idle during suspend" This reverts commit 8533051ce92015e9cc6f75e0d52119b9d91610b6. The idle-skip optimization bypasses GuC suspend, so the GPU may not perform the context switch that flushes TLB entries for invalidated userptr VMAs. In LR/preempt-fence VM mode, this can lead to missed TLB invalidation and page faults during userptr invalidation tests. Restore unconditional schedule toggling on suspend so the context-switch TLB flush is always performed. This optimization will be reintroduced with a fix that does not skip suspend in LR/preempt-fence VM mode. (cherry picked from commit 6a1e7934d9a6cf46aecae00a99c2603d1295e170)

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: reject oversized Broadcast Announcement prepend Existing advertising instances can already hold the maximum extended advertising payload. When hci_adv_bcast_annoucement() prepends the Broadcast Announcement service data to that payload, the combined data may no longer fit in the temporary buffer used to rebuild the advertising data. Reject that case before copying the existing payload and report the failure through the device log. This keeps the existing advertising data intact and avoids overrunning the temporary buffer.

In the Linux kernel, the following vulnerability has been resolved: drm/vkms: Fix use after free and double free on init error If the driver initialization fails, the vkms_exit() function might access an uninitialized or freed default_config pointer and it might double free it. Fix both possible errors by initializing default_config only when the driver initialization succeeded.

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix stale offload->prog pointer after constant blinding When a dev-bound-only BPF program (BPF_F_XDP_DEV_BOUND_ONLY) undergoes JIT compilation with constant blinding enabled (bpf_jit_harden >= 2), bpf_jit_blind_constants() clones the program. The original prog is then freed in bpf_jit_prog_release_other(), which updates aux->prog to point to the surviving clone, but fails to update offload->prog. This leaves offload->prog pointing to the freed original program. When the network namespace is subsequently destroyed, cleanup_net() triggers bpf_dev_bound_netdev_unregister(), which iterates ondev->progs and calls __bpf_prog_offload_destroy(offload->prog). Accessing the freed prog causes a page fault: BUG: unable to handle page fault for address: ffffc900085f1038 Workqueue: netns cleanup_net RIP: 0010:__bpf_prog_offload_destroy+0xc/0x80 Call Trace: __bpf_offload_dev_netdev_unregister+0x257/0x350 bpf_dev_bound_netdev_unregister+0x4a/0x90 unregister_netdevice_many_notify+0x2a2/0x660 ... cleanup_net+0x21a/0x320 The test sequence that triggers this reliably is: 1. Set net.core.bpf_jit_harden=2 (echo 2 > /proc/sys/net/core/bpf_jit_harden) 2. Run xdp_metadata selftest, which creates a dev-bound-only XDP program on a veth inside a netns (./test_progs -t xdp_metadata) 3. cleanup_net -> page fault in __bpf_prog_offload_destroy Dev-bound-only programs are unique in that they have an offload structure but go through the normal JIT path instead of bpf_prog_offload_compile(). This means they are subject to constant blinding's prog clone-and-replace, while also having offload->prog that must stay in sync. Fix this by updating offload->prog in bpf_jit_prog_release_other(), alongside the existing aux->prog update. Both are back-pointers to the prog that must be kept in sync when the prog is replaced.

In the Linux kernel, the following vulnerability has been resolved: dm cache policy smq: check allocation under invalidate lock commit 2d1f7b65f5de ("dm cache policy smq: fix missing locks in invalidating cache blocks") added mq->lock around the destructive part of smq_invalidate_mapping(), but left the e->allocated check outside the critical section. That leaves a check-then-act race. Two concurrent invalidators can both observe e->allocated as true before either of them takes mq->lock. The first invalidator that acquires the lock removes the entry from the queues and hash table and then calls free_entry(), which clears e->allocated and puts the entry back on the free list. The second invalidator can then acquire mq->lock and continue with the stale result of the unlocked check. This can corrupt the SMQ queues or hash table by deleting an entry that is no longer on those structures. It can also hit the allocation check in free_entry() when the same entry is freed again. Move the allocation check under mq->lock so the predicate and the destructive operations are serialized by the same lock.

In the Linux kernel, the following vulnerability has been resolved: drm/msm: Fix VM_BIND UNMAP locking Wrong argument meant that the objs involved in UNMAP ops were not always getting locked. Since _NO_SHARE objs share a common resv with the VM (which is always locked) this would only show up with non-_NO_SHARE BOs. Patchwork: https://patchwork.freedesktop.org/patch/713898/

In the Linux kernel, the following vulnerability has been resolved: um: Fix potential race condition in TLB sync During the TLB sync, we need to traverse and modify the page table, so we should hold the page table lock. Since full SMP support for threads within the same process is still missing, let's disable the split page table lock for simplicity.

In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Take state lock for af_unix iter When a BPF iterator program updates a sockmap, there is a race condition in unix_stream_bpf_update_proto() where the `peer` pointer can become stale[1] during a state transition TCP_ESTABLISHED -> TCP_CLOSE. CPU0 bpf CPU1 close -------- ---------- // unix_stream_bpf_update_proto() sk_pair = unix_peer(sk) if (unlikely(!sk_pair)) return -EINVAL; // unix_release_sock() skpair = unix_peer(sk); unix_peer(sk) = NULL; sock_put(skpair) sock_hold(sk_pair) // UaF More practically, this fix guarantees that the iterator program is consistently provided with a unix socket that remains stable during iterator execution. [1]: BUG: KASAN: slab-use-after-free in unix_stream_bpf_update_proto+0x155/0x490 Write of size 4 at addr ffff8881178c9a00 by task test_progs/2231 Call Trace: dump_stack_lvl+0x5d/0x80 print_report+0x170/0x4f3 kasan_report+0xe4/0x1c0 kasan_check_range+0x125/0x200 unix_stream_bpf_update_proto+0x155/0x490 sock_map_link+0x71c/0xec0 sock_map_update_common+0xbc/0x600 sock_map_update_elem+0x19a/0x1f0 bpf_prog_bbbf56096cdd4f01_selective_dump_unix+0x20c/0x217 bpf_iter_run_prog+0x21e/0xae0 bpf_iter_unix_seq_show+0x1e0/0x2a0 bpf_seq_read+0x42c/0x10d0 vfs_read+0x171/0xb20 ksys_read+0xff/0x200 do_syscall_64+0xf7/0x5e0 entry_SYSCALL_64_after_hwframe+0x76/0x7e Allocated by task 2236: kasan_save_stack+0x30/0x50 kasan_save_track+0x14/0x30 __kasan_slab_alloc+0x63/0x80 kmem_cache_alloc_noprof+0x1d5/0x680 sk_prot_alloc+0x59/0x210 sk_alloc+0x34/0x470 unix_create1+0x86/0x8a0 unix_stream_connect+0x318/0x15b0 __sys_connect+0xfd/0x130 __x64_sys_connect+0x72/0xd0 do_syscall_64+0xf7/0x5e0 entry_SYSCALL_64_after_hwframe+0x76/0x7e Freed by task 2236: kasan_save_stack+0x30/0x50 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x70 __kasan_slab_free+0x47/0x70 kmem_cache_free+0x11c/0x590 __sk_destruct+0x432/0x6e0 unix_release_sock+0x9b3/0xf60 unix_release+0x8a/0xf0 __sock_release+0xb0/0x270 sock_close+0x18/0x20 __fput+0x36e/0xac0 fput_close_sync+0xe5/0x1a0 __x64_sys_close+0x7d/0xd0 do_syscall_64+0xf7/0x5e0 entry_SYSCALL_64_after_hwframe+0x76/0x7e

In the Linux kernel, the following vulnerability has been resolved: fbdev: omap2: fix use-after-free in omapfb_mmap omapfb_mmap() has a race condition with OMAPFB_SETUP_PLANE ioctl that can lead to use-after-free: The fb_mmap() entry point holds mm_lock but not lock (fb_info->lock), while ioctl handlers like OMAPFB_SETUP_PLANE hold lock but not mm_lock. This allows concurrent execution. In omapfb_mmap(): 1. rg = omapfb_get_mem_region(ofbi->region); // Get old region ref 2. start = omapfb_get_region_paddr(ofbi); // Read from NEW region 3. len = fix->smem_len; // Read from NEW region 4. vm_iomap_memory(vma, start, len); // Map NEW region memory 5. atomic_inc(&rg->map_count); // Increment OLD region! Concurrently, OMAPFB_SETUP_PLANE can: - Reassign ofbi->region = new_rg - Update fix->smem_len - OMAPFB_SETUP_MEM then checks NEW region's map_count (0!) and frees it This leaves userspace with a mapping to freed physical memory. The fix is to read all required values (start, len) from the same region reference (rg) that will have its map_count incremented, preventing the region from being freed while still mapped.

In the Linux kernel, the following vulnerability has been resolved: ip6_vti: set netns_immutable on the fallback device. john1988 and Noam Rathaus reported that vti6_init_net() does not set the netns_immutable flag on the per-netns fallback tunnel device (ip6_vti0). Other similar tunnel drivers (like ip6_tunnel, sit, ip6_gre, and ip_tunnel) correctly set this flag during their fallback device initialization to prevent them from being moved to another network namespace.

In the Linux kernel, the following vulnerability has been resolved: bpf, arm64: Fix off-by-one in check_imm signed range check check_imm(bits, imm) is used in the arm64 BPF JIT to verify that a branch displacement (in arm64 instruction units) fits into the signed N-bit immediate field of a B, B.cond or CBZ/CBNZ encoding before it is handed to the encoder. The macro currently tests for (imm > 0 && imm >> bits) || (imm < 0 && ~imm >> bits) which admits values in [-2^N, 2^N) — effectively a signed (N+1)-bit range. A signed N-bit field only holds [-2^(N-1), 2^(N-1)), so the check admits one extra bit of range on each side. In particular, for check_imm19(), values in [2^18, 2^19) slip past the check but do not fit into the 19-bit signed imm19 field of B.cond. aarch64_insn_encode_immediate() then masks the raw value into the 19-bit field, setting bit 18 (the sign bit) and flipping a forward branch into a backward one. Same class of issue exists for check_imm26() and the B/BL encoding. Shift by (bits - 1) instead of bits so the actual signed N-bit range is enforced.

In the Linux kernel, the following vulnerability has been resolved: ipvs: clear the svc scheduler ptr early on edit ip_vs_edit_service() while unbinding the old scheduler clears the svc->scheduler ptr after the scheduler module initiates RCU callbacks. This can cause packets to use the old scheduler at the time when svc->sched_data is already freed after RCU grace period. Fix it by clearing the ptr early in ip_vs_unbind_scheduler(), before the done_service method schedules any RCU callbacks. Also, if the new scheduler fails to initialize when replacing the old scheduler, try to restore the old scheduler while still returning the error code.

In the Linux kernel, the following vulnerability has been resolved: PCI: endpoint: pci-ep-msi: Fix error unwind and prevent double alloc pci_epf_alloc_doorbell() stores the allocated doorbell message array in epf->db_msg/epf->num_db before requesting MSI vectors. If MSI allocation fails, the array is freed but the EPF state may still point to freed memory. Clear epf->db_msg and epf->num_db on the MSI allocation failure path so that later cleanup cannot double-free the array and callers can retry allocation. Also return -EBUSY when doorbells have already been allocated to prevent leaking or overwriting an existing allocation.

In the Linux kernel, the following vulnerability has been resolved: net: ena: PHC: Fix potential use-after-free in get_timestamp Move the phc->active check and resp pointer assignment to after acquiring the spinlock. Previously, phc->active was checked without holding the lock, and resp was cached from ena_dev->phc.virt_addr before the lock was acquired. If ena_com_phc_destroy() runs between the lockless active check and the lock acquisition, it sets active=false, releases the lock, frees the DMA memory, and sets virt_addr=NULL. The get_timestamp path would then read a NULL virt_addr and dereference it. With both the active check and the pointer read under the lock, destroy cannot free the memory while get_timestamp is using it.

In the Linux kernel, the following vulnerability has been resolved: misc: fastrpc: fix use-after-free race in fastrpc_map_create fastrpc_map_lookup returns a raw pointer after releasing fl->lock. The caller fastrpc_map_create then calls fastrpc_map_get (kref_get_unless_zero) on this unprotected pointer. A concurrent MEM_UNMAP can free the map between the lock release and the kref operation, resulting in a use-after-free on the freed slab object. Restore the take_ref parameter to fastrpc_map_lookup so the reference is acquired atomically under fl->lock before the pointer is exposed to the caller.

In the Linux kernel, the following vulnerability has been resolved: sched/psi: fix race between file release and pressure write A potential race condition exists between pressure write and cgroup file release regarding the priv member of struct kernfs_open_file, which triggers the uaf reported in [1]. Consider the following scenario involving execution on two separate CPUs: CPU0 CPU1 ==== ==== vfs_rmdir() kernfs_iop_rmdir() cgroup_rmdir() cgroup_kn_lock_live() cgroup_destroy_locked() cgroup_addrm_files() cgroup_rm_file() kernfs_remove_by_name() kernfs_remove_by_name_ns() vfs_write() __kernfs_remove() new_sync_write() kernfs_drain() kernfs_fop_write_iter() kernfs_drain_open_files() cgroup_file_write() kernfs_release_file() pressure_write() cgroup_file_release() ctx = of->priv; kfree(ctx); of->priv = NULL; cgroup_kn_unlock() cgroup_kn_lock_live() cgroup_get(cgrp) cgroup_kn_unlock() if (ctx->psi.trigger) // here, trigger uaf for ctx, that is of->priv The cgroup_rmdir() is protected by the cgroup_mutex, it also safeguards the memory deallocation of of->priv performed within cgroup_file_release(). However, the operations involving of->priv executed within pressure_write() are not entirely covered by the protection of cgroup_mutex. Consequently, if the code in pressure_write(), specifically the section handling the ctx variable executes after cgroup_file_release() has completed, a uaf vulnerability involving of->priv is triggered. Therefore, the issue can be resolved by extending the scope of the cgroup_mutex lock within pressure_write() to encompass all code paths involving of->priv, thereby properly synchronizing the race condition occurring between cgroup_file_release() and pressure_write(). And, if an live kn lock can be successfully acquired while executing the pressure write operation, it indicates that the cgroup deletion process has not yet reached its final stage; consequently, the priv pointer within open_file cannot be NULL. Therefore, the operation to retrieve the ctx value must be moved to a point *after* the live kn lock has been successfully acquired. In another situation, specifically after entering cgroup_kn_lock_live() but before acquiring cgroup_mutex, there exists a different class of race condition: CPU0: write memory.pressure CPU1: write cgroup.pressure=0 =========================== ============================= kernfs_fop_write_iter() kernfs_get_active_of(of) pressure_write() cgroup_kn_lock_live(memory.pressure) cgroup_tryget(cgrp) kernfs_break_active_protection(kn) ... blocks on cgroup_mutex cgroup_pressure_write() cgroup_kn_lock_live(cgroup.pressure) cgroup_file_show(memory.pressure, false) kernfs_show(false) kernfs_drain_open_files() cgroup_file_release(of) kfree(ctx) of->priv = NULL cgroup_kn_unlock() ... acquires cgroup_mutex ctx = of->priv; // may now be NULL if (ctx->psi.trigger) // NULL dereference Consequently, there is a possibility that of->priv is NULL, the pressure write needs to check for this. Now that the scope of the cgroup_mutex has been expanded, the original explicit cgroup_get/put operations are no longer necessary, this is because acquiring/releasing the live kn lock inherently executes a cgroup get/put operation. [1] BUG: KASAN: slab-use-after-free in pressure_write+0xa4/0x210 kernel/cgroup/cgroup.c:4011 Call Trace: pressure_write+0xa4/0x210 kernel/cgroup/cgroup.c:4011 cgroup_file_write+0x36f/0x790 kernel/cgroup/cgroup.c:43 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: mm/list_lru: drain before clearing xarray entry on reparent memcg_reparent_list_lrus() clears the dying memcg's xarray entry with xas_store(&xas, NULL) before reparenting its per-node lists into the parent. This opens a window where a concurrent list_lru_del() arriving for the dying memcg sees xa_load() == NULL, walks to the parent in lock_list_lru_of_memcg(), takes the parent's per-node lock, and calls list_del_init() on an item still physically linked on the dying memcg's list. If another in-flight thread holds the dying memcg's per-node lock at the same moment (another list_lru_del, or a list_lru_walk_one running an isolate callback), both threads modify ->next/->prev pointers on the same physical list under different locks. Adjacent items can corrupt each other's links. Fix it by reversing the order: reparent each per-node list and mark the child's list lru dead and then clear the xarray entry. Any concurrent list_lru op that finds the still-set xarray entry either takes the dying memcg's per-node lock (synchronizing with the drain) or sees LONG_MIN and walks to the parent, where the items now live.

In the Linux kernel, the following vulnerability has been resolved: drm/xe/dma-buf: fix UAF with retry loop Retry doesn't work here, since bo will be freed on error, leading to UAF. However, now that we do the alloc & init before the attach, we can now combine this as one unit and have the init do the alloc for us. This should make the retry safe. Reported by Sashiko. v2: Fix up the error unwind (CI) (cherry picked from commit 479669418253e0f27f8cf5db01a731352ea592e7)

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Clamp HDMI HDCP2 rx_id_list read to buffer size [Why & How] During HDCP 2.x repeater authentication over HDMI, the driver reads the sink's RxStatus register and extracts a 10-bit message size field (max value 1023). This value is used as the read length for the ReceiverID list without being clamped to the size of the destination buffer rx_id_list[177]. A malicious HDMI repeater could advertise a message size larger than the buffer, causing an out-of-bounds write during the I2C read. Clamp the read length in mod_hdcp_read_rx_id_list() to the size of the rx_id_list buffer, matching the approach already used in the DP branch. (cherry picked from commit 229212219e4247d9486f8ba41ef087358490be09)

In the Linux kernel, the following vulnerability has been resolved: net/tcp-ao: fix use-after-free of key in del_async path In tcp_ao_delete_key(), the del_async path skips the current_key and rnext_key validity checks present in the synchronous path, assuming these pointers are always NULL on LISTEN sockets. However, if a key was added with set_current=1/set_rnext=1 while the socket was in CLOSE state, current_key and rnext_key will be non-NULL after listen() transitions the socket to LISTEN. When such a key is deleted with del_async=1, hlist_del_rcu() and call_rcu() free the key without clearing the dangling pointers. After the RCU grace period, getsockopt(TCP_AO_INFO) dereferences current_key->sndid and rnext_key->rcvid from freed slab memory. Clear current_key and rnext_key in the del_async path when they reference the key being deleted.

In the Linux kernel, the following vulnerability has been resolved: media: rzv2h-ivc: Fix concurrent buffer list access The list of buffers (`rzv2h_ivc::buffers.queue`) is protected by a spinlock (`rzv2h_ivc::buffers.lock`). However, in `rzv2h_ivc_transfer_buffer()`, which runs in a separate workqueue, the `list_del()` call is executed without holding the spinlock, which makes it possible for the list to be concurrently modified Fix that by removing a buffer from the list in the lock protected section. [assign ivc->buffers.curr in critical section as reported by Barnabas]

In the Linux kernel, the following vulnerability has been resolved: iio: adc: ti-ads1298: add bounds check to pga_settings index ads1298_pga_settings has 7 elements but ADS1298_MASK_CH_PGA can yield values 0-7. If it yields a value >= 7, this causes an out-of-bounds array access. Add a bounds check and return -EINVAL if the index is out of range. Note that the remaining value b111 is reserved so should not be seen in a correctly functioning system.

In the Linux kernel, the following vulnerability has been resolved: fuse: re-lock request before replacing page cache folio fuse_try_move_folio() unlocks the request on entry but does not re-lock it on the success path. This means fuse_chan_abort() can end the request and free the fuse_io_args (eg fuse_readpages_end()) while the subsequent copy chain logic after fuse_try_move_folio() accesses the fuse_io_args, leading to use-after-free issues. Fix this by calling lock_request() before replace_page_cache_folio(). This ensures the request is locked on the success path which will prevent the fuse_io_args from being freed while the later copying logic runs, and also ensures that the ap->folios[i]->mapping is never null since ap->folios[i] will always point to the newfolio after replace_page_cache_folio().

In the Linux kernel, the following vulnerability has been resolved: i2c: core: fix adapter registration race Adapters can be looked up based on their id using i2c_get_adapter() which takes a reference to the embedded struct device. Make sure that the adapter (including its struct device) has been initialised before adding it to the IDR to avoid accessing uninitialised data which could, for example, lead to NULL-pointer dereferences or use-after-free. Note that the i2c-dev chardev, which is registered from a bus notifier, currently uses i2c_get_adapter() so the adapter needs to be added to the IDR before registration.

In the Linux kernel, the following vulnerability has been resolved: ipv6: account for fraggap on the paged allocation path In __ip6_append_data(), when the paged-allocation branch is taken (MSG_MORE / NETIF_F_SG / large fraglen), alloclen and pagedlen are computed as alloclen = fragheaderlen + transhdrlen; pagedlen = datalen - transhdrlen; datalen already includes fraggap (datalen = length + fraggap). When fraggap is non-zero, this is not the first skb and transhdrlen is zero. The fraggap bytes carried over from the previous skb are copied just past the fragment headers in the new skb's linear area. The linear area is therefore undersized by fraggap bytes while pagedlen is overstated by the same amount, and the copy writes past skb->end into the trailing skb_shared_info. An unprivileged user can trigger this via a UDPv6 socket using MSG_MORE together with MSG_SPLICE_PAGES. The bad accounting was introduced by commit 773ba4fe9104 ("ipv6: avoid partial copy for zc"). Before commit ce650a166335 ("udp6: Fix __ip6_append_data()'s handling of MSG_SPLICE_PAGES"), the negative copy value caused -EINVAL to be returned. That later commit allowed MSG_SPLICE_PAGES to proceed in this case, making the corruption triggerable. The non-paged branch sets alloclen to fraglen, which already accounts for fraggap because datalen does. Bring the paged branch in line by adding fraggap to alloclen and subtracting it from pagedlen. After this adjustment, copy no longer collapses to -fraggap on the paged path, so remove the stale comment describing that old arithmetic. Since a negative copy is no longer expected for a valid MSG_SPLICE_PAGES case, remove the MSG_SPLICE_PAGES exception from the negative copy check.

In the Linux kernel, the following vulnerability has been resolved: accel/ethosu: fix OOB write in ethosu_gem_cmdstream_copy_and_validate() The command stream parsing loop increments the index variable a second time when a 64-bit command word is encountered (bit 14 set), but does not re-check the loop bound before writing the second word: for (i = 0; i < size / 4; i++) { bocmds[i] = cmds[0]; if (cmd & 0x4000) { i++; bocmds[i] = cmds[1]; /* unchecked */ } } The buffer bocmds is backed by a DMA allocation of exactly size bytes from drm_gem_dma_create(ddev, size), giving valid indices [0, size/4-1]. When i == size/4 - 1 on entry to an iteration and bit 14 of cmds[0] is set, bocmds[size/4-1] is written in bounds, i is then incremented to size/4, and bocmds[size/4] writes four bytes past the end of the allocation. Userspace controls both the buffer contents and the size argument via the ioctl, making this a userspace-triggerable heap out-of-bounds write. Fix by checking the incremented index against the buffer bound before the second write and returning -EINVAL if the buffer is too small to contain the extended command.

In the Linux kernel, the following vulnerability has been resolved: memcg: use round-robin victim selection in refill_stock Harry Yoo reported that get_random_u32_below() is not safe to call in the nmi context and memcg charge draining can happen in nmi context. More specifically get_random_u32_below() is neither reentrant- nor NMI-safe: it acquires a per-cpu local_lock via local_lock_irqsave() on the batched_entropy_u32 state. An NMI that lands on a CPU mid-update of the ChaCha batch state and recurses into the random subsystem would corrupt that state. The memcg_stock local_trylock prevents re-entry on the percpu stock itself, but cannot protect an unrelated subsystem's per-cpu lock. Replace the random pick with a per-cpu round-robin counter stored in memcg_stock_pcp and serialized by the same local_trylock that already guards cached[] and nr_pages[]. No atomics, no random calls, no extra locks needed.

In the Linux kernel, the following vulnerability has been resolved: fs/mbcache: cancel shrink work before destroying the cache mb_cache_destroy() calls shrinker_free() and then frees all cache entries and the cache itself, but it does not cancel the pending c_shrink_work work item first. If mb_cache_entry_create() schedules c_shrink_work via schedule_work() and the work item is still pending or running when mb_cache_destroy() runs, mb_cache_shrink_worker() will access the cache after its memory has been freed, causing a use-after-free. This is only reachable by a privileged user (root or CAP_SYS_ADMIN) who can trigger the last put of a mounted ext2/ext4/ocfs2 filesystem. Cancel the work item with cancel_work_sync() before calling shrinker_free(), ensuring the worker has finished and will not be rescheduled before the cache is torn down.

In the Linux kernel, the following vulnerability has been resolved: mailbox: mailbox-test: free channels on probe error On probe error, free the previously obtained channels. This not only prevents a leak, but also UAF scenarios because the client structure will be removed nonetheless because it was allocated with devm.

In the Linux kernel, the following vulnerability has been resolved: bpf: Validate node_id in arena_alloc_pages() arena_alloc_pages() accepts a plain int node_id and forwards it through the entire allocation chain without any bounds checking. Validate node_id before passing it down the allocation chain in arena_alloc_pages().

In the Linux kernel, the following vulnerability has been resolved: ALSA: timer: Forcibly close timer instances at closing When snd_timer object is freed via snd_timer_free() and still pending snd_timer_instance objects are assigned to the timer object, it tries to unlink all instances and just set NULL to each ti->timer, then releases the resources immediately. The problem is, however, when there are slave timer instances that are associated with a master instance linked to this timer: namely, those slave instances still point to the freed timer object although the master instance is unlinked, which may lead to user-after-free. The bug can be easily triggered particularly when a new userspace-driven timers (CONFIG_SND_UTIMER) is involved, since it can create and delete the timer object via a simple file open/close, while the other applications may keep accessing to that timer. This patch is an attempt to paper over the problem above: now instead of just unlinking, call snd_timer_close[_locked]() forcibly for each pending timer instance, so that all assigned slave timer instances are properly detached, too. Since snd_timer_close() might be called later by the driver that created that instance, the check of SNDRV_TIMER_IFLG_DEAD is added at the beginning, too.

In the Linux kernel, the following vulnerability has been resolved: ice: fix double-free of tx_buf skb If ice_tso() or ice_tx_csum() fail, the error path in ice_xmit_frame_ring() frees the skb, but the 'first' tx_buf still points to it and is marked as valid (ICE_TX_BUF_SKB). 'next_to_use' remains unchanged, so the potential problem will likely fix itself when the next packet is transmitted and the tx_buf gets overwritten. But if there is no next packet and the interface is brought down instead, ice_clean_tx_ring() -> ice_unmap_and_free_tx_buf() will find the tx_buf and free the skb for the second time. The fix is to reset the tx_buf type to ICE_TX_BUF_EMPTY in the error path, so that ice_unmap_and_free_tx_buf(). Move the initialization of 'first' up, to ensure it's already valid in case we hit the linearization error path. The bug was spotted by AI while I had it looking for something else. It also proposed an initial version of the patch. I reproduced the bug and tested the fix by adding code to inject failures, on a build with KASAN. I looked for similar bugs in related Intel drivers and did not find any.

In the Linux kernel, the following vulnerability has been resolved: io_uring/net: inherit IORING_CQE_F_BUF_MORE across bundle recv retries When a bundle recv retries inside io_recv_finish(), the merge logic OR the saved cflags from the previous iteration with the cflags returned by the new iteration: cflags = req->cqe.flags | (cflags & CQE_F_MASK); Bits listed in CQE_F_MASK are inherited from the new iteration, and all other bits (notably IORING_CQE_F_BUFFER and the buffer ID) come from the saved cflags. Before this change CQE_F_MASK covered only IORING_CQE_F_SOCK_NONEMPTY and IORING_CQE_F_MORE. When using provided buffer rings (IOU_PBUF_RING_INC) with incremental mode, and bundle recv, io_kbuf_inc_commit() can leave the head ring entry partially consumed, __io_put_kbufs() then sets IORING_CQE_F_BUF_MORE on the returned cflags so userspace knows the buffer ID will be reused for subsequent completions. Because IORING_CQE_F_BUF_MORE was not in CQE_F_MASK, the merge above silently dropped it whenever the final retry iteration partially consumed the buffer, and the subsequent req->cqe.flags = cflags & ~CQE_F_MASK save would have left a stale IORING_CQE_F_BUF_MORE in the carried-over cflags had one been present. Userspace would then wrongfully advance it ring head past an entry the kernel still uses. Add IORING_CQE_F_BUF_MORE to CQE_F_MASK so it is both inherited from the new iteration into the user-visible CQE and stripped from the saved cflags between iterations.

In the Linux kernel, the following vulnerability has been resolved: dm log: fix out-of-bounds write due to region_count overflow The local variable region_count in create_log_context() is declared as unsigned int (32-bit), but dm_sector_div_up() returns sector_t (64-bit). When a device-mapper target has a sufficiently large ti->len with a small region_size, the division result can exceed UINT_MAX. The truncated value is then used to calculate bitset_size, causing clean_bits, sync_bits, and recovering_bits to be allocated far smaller than needed for the actual number of regions. Subsequent log operations (log_set_bit, log_clear_bit, log_test_bit) use region indices derived from the full untruncated region space, causing out-of-bounds writes to kernel heap memory allocated by vmalloc. This can be reproduced by creating a mirror target whose region_count overflows 32 bits: dmsetup create bigzero --table '0 8589934594 zero' dmsetup create mymirror --table '0 8589934594 mirror \ core 2 2 nosync 2 /dev/mapper/bigzero 0 \ /dev/mapper/bigzero 0' The status output confirms the truncation (sync_count=1 instead of 4294967297, because 0x100000001 was truncated to 1): $ dmsetup status mymirror 0 8589934594 mirror 2 254:1 254:1 1/4294967297 ... This leads to a kernel crash in core_in_sync: BUG: scheduling while atomic: (udev-worker)/9150/0x00000000 RIP: 0010:core_in_sync+0x14/0x30 [dm_log] CR2: 0000000000000008 Fixing recursive fault but reboot is needed! Fix by widening the local region_count to sector_t and adding an explicit overflow check before the value is assigned to lc->region_count.

In the Linux kernel, the following vulnerability has been resolved: af_unix: Drop all SCM attributes for SOCKMAP. SOCKMAP can hide inflight fd from AF_UNIX GC. When a socket in SOCKMAP receives skb with inflight fd, sk_psock_verdict_data_ready() looks up the mapped socket and enqueue skb to its psock->ingress_skb. Since neither the old nor the new GC can inspect the psock queue, the hidden skb leaks the inflight sockets. Note that this cannot be detected via kmemleak because inflight sockets are linked to a global list. In addition, SOCKMAP redirect breaks the Tarjan-based GC's assumption that unix_edge.successor is always alive, which is no longer true once skb is redirected, resulting in use-after-free below. [0] Moreover, SOCKMAP does not call scm_stat_del() properly, so unix_show_fdinfo() could report an incorrect fd count. sk_msg_recvmsg() does not support any SCM attributes in the first place. Let's drop all SCM attributes before passing skb to the SOCKMAP layer. [0]: BUG: KASAN: slab-use-after-free in unix_del_edges (net/unix/garbage.c:118 net/unix/garbage.c:181 net/unix/garbage.c:251) Read of size 8 at addr ffff888125362670 by task kworker/56:1/496 CPU: 56 UID: 0 PID: 496 Comm: kworker/56:1 Not tainted 7.0.0-rc7-00263-gb9d8b856689d #3 PREEMPT(lazy) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014 Workqueue: events sk_psock_backlog Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:122) print_report (mm/kasan/report.c:379) kasan_report (mm/kasan/report.c:597) unix_del_edges (net/unix/garbage.c:118 net/unix/garbage.c:181 net/unix/garbage.c:251) unix_destroy_fpl (net/unix/garbage.c:317) unix_destruct_scm (./include/net/scm.h:80 ./include/net/scm.h:86 net/unix/af_unix.c:1976) sk_psock_backlog (./include/linux/skbuff.h:?) process_scheduled_works (kernel/workqueue.c:?) worker_thread (kernel/workqueue.c:?) kthread (kernel/kthread.c:438) ret_from_fork (arch/x86/kernel/process.c:164) ret_from_fork_asm (arch/x86/entry/entry_64.S:258) </TASK> Allocated by task 955: kasan_save_track (mm/kasan/common.c:58 mm/kasan/common.c:78) __kasan_slab_alloc (mm/kasan/common.c:369) kmem_cache_alloc_noprof (mm/slub.c:4539) sk_prot_alloc (net/core/sock.c:2240) sk_alloc (net/core/sock.c:2301) unix_create1 (net/unix/af_unix.c:1099) unix_create (net/unix/af_unix.c:1169) __sock_create (net/socket.c:1606) __sys_socketpair (net/socket.c:1811) __x64_sys_socketpair (net/socket.c:1863 net/socket.c:1860 net/socket.c:1860) do_syscall_64 (arch/x86/entry/syscall_64.c:?) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) Freed by task 496: kasan_save_track (mm/kasan/common.c:58 mm/kasan/common.c:78) kasan_save_free_info (mm/kasan/generic.c:587) __kasan_slab_free (mm/kasan/common.c:287) kmem_cache_free (mm/slub.c:6165) __sk_destruct (net/core/sock.c:2282 net/core/sock.c:2384) sk_psock_destroy (./include/net/sock.h:?) process_scheduled_works (kernel/workqueue.c:?) worker_thread (kernel/workqueue.c:?) kthread (kernel/kthread.c:438) ret_from_fork (arch/x86/kernel/process.c:164) ret_from_fork_asm (arch/x86/entry/entry_64.S:258)

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_fs: serialize DMABUF cancel against request completion ffs_epfile_dmabuf_io_complete() calls usb_ep_free_request() on the completed request but leaves priv->req, the back-pointer that ffs_dmabuf_transfer() set on submission, pointing at the freed memory. A later FUNCTIONFS_DMABUF_DETACH ioctl or ffs_epfile_release() on the close path still sees priv->req non-NULL under ffs->eps_lock: if (priv->ep && priv->req) usb_ep_dequeue(priv->ep, priv->req); so usb_ep_dequeue() is called on a freed usb_request. On dummy_hcd the dequeue path only walks a live queue and pointer-compares, so the freed pointer reads without faulting and KASAN requires an explicit check at the FunctionFS call site to surface the use-after-free. On SG-capable in-tree UDCs the dequeue path dereferences the supplied request immediately: * chipidea's ep_dequeue() does container_of(req, struct ci_hw_req, req) and reads hwreq->req.status before acquiring its own lock. * cdnsp's cdnsp_gadget_ep_dequeue() reads request->status first. The narrower option of clearing priv->req via cmpxchg() in the completion does not close the race: the completion runs without eps_lock, so a cancel path holding eps_lock can still observe priv->req non-NULL, race a concurrent completion that clears and frees, and pass the freed pointer to usb_ep_dequeue(). A slightly longer fix that moves the free into the cleanup work is needed. Same class of lifetime race as the recent usbip-vudc timer fix [1]. Take eps_lock in the sole place that mutates priv->req from the callback direction by moving usb_ep_free_request() out of the completion into ffs_dmabuf_cleanup(), the existing work handler scheduled by ffs_dmabuf_signal_done() on ffs->io_completion_wq. Clear priv->req there under eps_lock before freeing, and only clear if priv->req still names our request (a subsequent ffs_dmabuf_transfer() on the same attachment may have queued a new one). This keeps the existing dummy_hcd sync-dequeue invariant: the completion callback is still invoked by the UDC without eps_lock held (dummy_hcd drops its own lock before calling the callback), and the callback now takes no f_fs lock at all. Serialization against the cancel path happens in cleanup, which runs from the workqueue with no f_fs lock held on entry. The priv ref count protects the containing ffs_dmabuf_priv: ffs_dmabuf_transfer() takes a ref via ffs_dmabuf_get(), cleanup drops it via ffs_dmabuf_put(), so priv stays live for the cleanup even after the cancel path's list_del + ffs_dmabuf_put. The ffs_dmabuf_transfer() error path no longer frees usb_req inline: fence->req and fence->ep are set before usb_ep_queue(), so ffs_dmabuf_cleanup() (scheduled by the error-path ffs_dmabuf_signal_done()) owns the free regardless of whether the queue succeeded. Reproduced under KASAN on both detach and close paths against dummy_hcd with an observability hook (kasan_check_byte(priv->req) immediately before usb_ep_dequeue) at the two FunctionFS cancel sites to surface the stale-pointer access; the hook is not part of this patch. The KASAN allocator / free stacks in the captured splats identify the same request: alloc in dummy_alloc_request, free in dummy_timer, fault reached from ffs_epfile_release (close) and from the FUNCTIONFS_DMABUF_DETACH ioctl (detach). With the patch applied, both paths are silent under the same hook. The bug is reached from the FunctionFS device node, which in real deployments is owned by the privileged gadget daemon (adbd, UMS, composite gadget services, etc.); it is not reachable from unprivileged userspace or from a USB host on the cable. FunctionFS mounts default to GLOBAL_ROOT_UID, but the filesystem supports uid=, gid=, and fmode= delegation to a non-root gadget daemon, so on real deployments the attacker may be a less-privileged service rather than root.

In the Linux kernel, the following vulnerability has been resolved: io_uring: fix io_req_prep_async with provided buffers io_req_prep_async() can import provided buffers, commit the ring state by giving up on that before, it'll be reimported later if needed.

In the Linux kernel, the following vulnerability has been resolved: media: ivsc: Fix crash at shutdown due to missing mei_cldev_disable() calls Both the ACE and CSI driver are missing a mei_cldev_disable() call in their remove() function. This causes the mei_cl client to stay part of the mei_device->file_list list even though its memory is freed by mei_cl_bus_dev_release() calling kfree(cldev->cl). This leads to a use-after-free when mei_vsc_remove() runs mei_stop() which first removes all mei bus devices calling mei_ace_remove() and mei_csi_remove() followed by mei_cl_bus_dev_release() and then calls mei_cl_all_disconnect() which walks over mei_device->file_list dereferecing the just freed cldev->cl. And mei_vsc_remove() it self is run at shutdown because of the platform_device_unregister(tp->pdev) in vsc_tp_shutdown() When building a kernel with KASAN this leads to the following KASAN report: [ 106.634504] ================================================================== [ 106.634623] BUG: KASAN: slab-use-after-free in mei_cl_set_disconnected (drivers/misc/mei/client.c:783) mei [ 106.634683] Read of size 4 at addr ffff88819cb62018 by task systemd-shutdow/1 [ 106.634729] [ 106.634767] Tainted: [E]=UNSIGNED_MODULE [ 106.634770] Hardware name: Dell Inc. XPS 16 9640/09CK4V, BIOS 1.12.0 02/10/2025 [ 106.634773] Call Trace: [ 106.634777] <TASK> ... [ 106.634871] kasan_report (mm/kasan/report.c:221 mm/kasan/report.c:636) [ 106.634901] mei_cl_set_disconnected (drivers/misc/mei/client.c:783) mei [ 106.634921] mei_cl_all_disconnect (drivers/misc/mei/client.c:2165 (discriminator 4)) mei [ 106.634941] mei_reset (drivers/misc/mei/init.c:163) mei ... [ 106.635042] mei_stop (drivers/misc/mei/init.c:348) mei [ 106.635062] mei_vsc_remove (drivers/misc/mei/mei_dev.h:784 drivers/misc/mei/platform-vsc.c:393) mei_vsc [ 106.635066] platform_remove (drivers/base/platform.c:1424) Add the missing mei_cldev_disable() calls so that the mei_cl gets removed from mei_device->file_list before it is freed to fix this.

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7915: fix list corruption after hardware restart Since stations are recreated from scratch, all lists that wcids are added to must be cleared before calling ieee80211_restart_hw. Set wcid->sta = 0 for each wcid entry in order to ensure that they are not added again before they are ready.

In the Linux kernel, the following vulnerability has been resolved: HID: asus: fix UAF via HID_CLAIMED_INPUT validation After hid_hw_start() is called hidinput_connect() will eventually be called to set up the device with the input layer since the HID_CONNECT_DEFAULT connect mask is used. During hidinput_connect() all input and output reports are processed and corresponding hid_inputs are allocated and configured via hidinput_configure_usages(). This process involves slot tagging report fields and configuring usages by setting relevant bits in the capability bitmaps. However it is possible that the capability bitmaps are not set at all leading to the subsequent hidinput_has_been_populated() check to fail leading to the freeing of the hid_input and the underlying input device. This becomes problematic because a malicious HID device like a ASUS ROG N-Key keyboard can trigger the above scenario via a specially crafted descriptor which then leads to a user-after-free when the name of the freed input device is written to later on after hid_hw_start(). Below, report 93 intentionally utilises the HID_UP_UNDEFINED Usage Page which is skipped during usage configuration, leading to the frees. 0x05, 0x0D, // Usage Page (Digitizer) 0x09, 0x05, // Usage (Touch Pad) 0xA1, 0x01, // Collection (Application) 0x85, 0x0D, // Report ID (13) 0x06, 0x00, 0xFF, // Usage Page (Vendor Defined 0xFF00) 0x09, 0xC5, // Usage (0xC5) 0x15, 0x00, // Logical Minimum (0) 0x26, 0xFF, 0x00, // Logical Maximum (255) 0x75, 0x08, // Report Size (8) 0x95, 0x04, // Report Count (4) 0xB1, 0x02, // Feature (Data,Var,Abs) 0x85, 0x5D, // Report ID (93) 0x06, 0x00, 0x00, // Usage Page (Undefined) 0x09, 0x01, // Usage (0x01) 0x15, 0x00, // Logical Minimum (0) 0x26, 0xFF, 0x00, // Logical Maximum (255) 0x75, 0x08, // Report Size (8) 0x95, 0x1B, // Report Count (27) 0x81, 0x02, // Input (Data,Var,Abs) 0xC0, // End Collection Below is the KASAN splat after triggering the UAF: [ 21.672709] ================================================================== [ 21.673700] BUG: KASAN: slab-use-after-free in asus_probe+0xeeb/0xf80 [ 21.673700] Write of size 8 at addr ffff88810a0ac000 by task kworker/1:2/54 [ 21.673700] [ 21.673700] CPU: 1 UID: 0 PID: 54 Comm: kworker/1:2 Not tainted 6.16.0-rc4-g9773391cf4dd-dirty #36 PREEMPT(voluntary) [ 21.673700] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 [ 21.673700] Call Trace: [ 21.673700] <TASK> [ 21.673700] dump_stack_lvl+0x5f/0x80 [ 21.673700] print_report+0xd1/0x660 [ 21.673700] kasan_report+0xe5/0x120 [ 21.673700] __asan_report_store8_noabort+0x1b/0x30 [ 21.673700] asus_probe+0xeeb/0xf80 [ 21.673700] hid_device_probe+0x2ee/0x700 [ 21.673700] really_probe+0x1c6/0x6b0 [ 21.673700] __driver_probe_device+0x24f/0x310 [ 21.673700] driver_probe_device+0x4e/0x220 [...] [ 21.673700] [ 21.673700] Allocated by task 54: [ 21.673700] kasan_save_stack+0x3d/0x60 [ 21.673700] kasan_save_track+0x18/0x40 [ 21.673700] kasan_save_alloc_info+0x3b/0x50 [ 21.673700] __kasan_kmalloc+0x9c/0xa0 [ 21.673700] __kmalloc_cache_noprof+0x139/0x340 [ 21.673700] input_allocate_device+0x44/0x370 [ 21.673700] hidinput_connect+0xcb6/0x2630 [ 21.673700] hid_connect+0xf74/0x1d60 [ 21.673700] hid_hw_start+0x8c/0x110 [ 21.673700] asus_probe+0x5a3/0xf80 [ 21.673700] hid_device_probe+0x2ee/0x700 [ 21.673700] really_probe+0x1c6/0x6b0 [ 21.673700] __driver_probe_device+0x24f/0x310 [ 21.673700] driver_probe_device+0x4e/0x220 [...] [ 21.673700] [ 21.673700] Freed by task 54: [ 21.673700] kasan_save_stack+0x3d/0x60 [ 21.673700] kasan_save_track+0x18/0x40 [ 21.673700] kasan_save_free_info+0x3f/0x60 [ 21.673700] __kasan_slab_free+0x3c/0x50 [ 21.673700] kfre ---truncated---

In the Linux kernel, the following vulnerability has been resolved: fs/buffer: fix use-after-free when call bh_read() helper There's issue as follows: BUG: KASAN: stack-out-of-bounds in end_buffer_read_sync+0xe3/0x110 Read of size 8 at addr ffffc9000168f7f8 by task swapper/3/0 CPU: 3 UID: 0 PID: 0 Comm: swapper/3 Not tainted 6.16.0-862.14.0.6.x86_64 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) Call Trace: <IRQ> dump_stack_lvl+0x55/0x70 print_address_description.constprop.0+0x2c/0x390 print_report+0xb4/0x270 kasan_report+0xb8/0xf0 end_buffer_read_sync+0xe3/0x110 end_bio_bh_io_sync+0x56/0x80 blk_update_request+0x30a/0x720 scsi_end_request+0x51/0x2b0 scsi_io_completion+0xe3/0x480 ? scsi_device_unbusy+0x11e/0x160 blk_complete_reqs+0x7b/0x90 handle_softirqs+0xef/0x370 irq_exit_rcu+0xa5/0xd0 sysvec_apic_timer_interrupt+0x6e/0x90 </IRQ> Above issue happens when do ntfs3 filesystem mount, issue may happens as follows: mount IRQ ntfs_fill_super read_cache_page do_read_cache_folio filemap_read_folio mpage_read_folio do_mpage_readpage ntfs_get_block_vbo bh_read submit_bh wait_on_buffer(bh); blk_complete_reqs scsi_io_completion scsi_end_request blk_update_request end_bio_bh_io_sync end_buffer_read_sync __end_buffer_read_notouch unlock_buffer wait_on_buffer(bh);--> return will return to caller put_bh --> trigger stack-out-of-bounds In the mpage_read_folio() function, the stack variable 'map_bh' is passed to ntfs_get_block_vbo(). Once unlock_buffer() unlocks and wait_on_buffer() returns to continue processing, the stack variable is likely to be reclaimed. Consequently, during the end_buffer_read_sync() process, calling put_bh() may result in stack overrun. If the bh is not allocated on the stack, it belongs to a folio. Freeing a buffer head which belongs to a folio is done by drop_buffers() which will fail to free buffers which are still locked. So it is safe to call put_bh() before __end_buffer_read_notouch().

In the Linux kernel, the following vulnerability has been resolved: iio: light: Add check for array bounds in veml6075_read_int_time_ms The array contains only 5 elements, but the index calculated by veml6075_read_int_time_index can range from 0 to 7, which could lead to out-of-bounds access. The check prevents this issue. Coverity Issue CID 1574309: (#1 of 1): Out-of-bounds read (OVERRUN) overrun-local: Overrunning array veml6075_it_ms of 5 4-byte elements at element index 7 (byte offset 31) using index int_index (which evaluates to 7) This is hardening against potentially broken hardware. Good to have but not necessary to backport.

In the Linux kernel, the following vulnerability has been resolved: net: appletalk: Fix use-after-free in AARP proxy probe The AARP proxy‐probe routine (aarp_proxy_probe_network) sends a probe, releases the aarp_lock, sleeps, then re-acquires the lock. During that window an expire timer thread (__aarp_expire_timer) can remove and kfree() the same entry, leading to a use-after-free. race condition: cpu 0 | cpu 1 atalk_sendmsg() | atif_proxy_probe_device() aarp_send_ddp() | aarp_proxy_probe_network() mod_timer() | lock(aarp_lock) // LOCK!! timeout around 200ms | alloc(aarp_entry) and then call | proxies[hash] = aarp_entry aarp_expire_timeout() | aarp_send_probe() | unlock(aarp_lock) // UNLOCK!! lock(aarp_lock) // LOCK!! | msleep(100); __aarp_expire_timer(&proxies[ct]) | free(aarp_entry) | unlock(aarp_lock) // UNLOCK!! | | lock(aarp_lock) // LOCK!! | UAF aarp_entry !! ================================================================== BUG: KASAN: slab-use-after-free in aarp_proxy_probe_network+0x560/0x630 net/appletalk/aarp.c:493 Read of size 4 at addr ffff8880123aa360 by task repro/13278 CPU: 3 UID: 0 PID: 13278 Comm: repro Not tainted 6.15.2 #3 PREEMPT(full) Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x116/0x1b0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:408 [inline] print_report+0xc1/0x630 mm/kasan/report.c:521 kasan_report+0xca/0x100 mm/kasan/report.c:634 aarp_proxy_probe_network+0x560/0x630 net/appletalk/aarp.c:493 atif_proxy_probe_device net/appletalk/ddp.c:332 [inline] atif_ioctl+0xb58/0x16c0 net/appletalk/ddp.c:857 atalk_ioctl+0x198/0x2f0 net/appletalk/ddp.c:1818 sock_do_ioctl+0xdc/0x260 net/socket.c:1190 sock_ioctl+0x239/0x6a0 net/socket.c:1311 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:906 [inline] __se_sys_ioctl fs/ioctl.c:892 [inline] __x64_sys_ioctl+0x194/0x200 fs/ioctl.c:892 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xcb/0x250 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> Allocated: aarp_alloc net/appletalk/aarp.c:382 [inline] aarp_proxy_probe_network+0xd8/0x630 net/appletalk/aarp.c:468 atif_proxy_probe_device net/appletalk/ddp.c:332 [inline] atif_ioctl+0xb58/0x16c0 net/appletalk/ddp.c:857 atalk_ioctl+0x198/0x2f0 net/appletalk/ddp.c:1818 Freed: kfree+0x148/0x4d0 mm/slub.c:4841 __aarp_expire net/appletalk/aarp.c:90 [inline] __aarp_expire_timer net/appletalk/aarp.c:261 [inline] aarp_expire_timeout+0x480/0x6e0 net/appletalk/aarp.c:317 The buggy address belongs to the object at ffff8880123aa300 which belongs to the cache kmalloc-192 of size 192 The buggy address is located 96 bytes inside of freed 192-byte region [ffff8880123aa300, ffff8880123aa3c0) Memory state around the buggy address: ffff8880123aa200: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff8880123aa280: 00 00 00 00 fc fc fc fc fc fc fc fc fc fc fc fc >ffff8880123aa300: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8880123aa380: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc ffff8880123aa400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ==================================================================

In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Fix buffer free/clear order in deferred receive path Fix a use-after-free window by correcting the buffer release sequence in the deferred receive path. The code freed the RQ buffer first and only then cleared the context pointer under the lock. Concurrent paths (e.g., ABTS and the repost path) also inspect and release the same pointer under the lock, so the old order could lead to double-free/UAF. Note that the repost path already uses the correct pattern: detach the pointer under the lock, then free it after dropping the lock. The deferred path should do the same.

In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix untrusted unsigned subtract Fix the following Smatch static checker warning: net/rxrpc/rxgk_app.c:65 rxgk_yfs_decode_ticket() warn: untrusted unsigned subtract. 'ticket_len - 10 * 4' by prechecking the length of what we're trying to extract in two places in the token and decoding for a response packet. Also use sizeof() on the struct we're extracting rather specifying the size numerically to be consistent with the other related statements.

In the Linux kernel, the following vulnerability has been resolved: ftrace: Also allocate and copy hash for reading of filter files Currently the reader of set_ftrace_filter and set_ftrace_notrace just adds the pointer to the global tracer hash to its iterator. Unlike the writer that allocates a copy of the hash, the reader keeps the pointer to the filter hashes. This is problematic because this pointer is static across function calls that release the locks that can update the global tracer hashes. This can cause UAF and similar bugs. Allocate and copy the hash for reading the filter files like it is done for the writers. This not only fixes UAF bugs, but also makes the code a bit simpler as it doesn't have to differentiate when to free the iterator's hash between writers and readers.

In the Linux kernel, the following vulnerability has been resolved: pstore/ram: fix buffer overflow in persistent_ram_save_old() persistent_ram_save_old() can be called multiple times for the same persistent_ram_zone (e.g., via ramoops_pstore_read -> ramoops_get_next_prz for PSTORE_TYPE_DMESG records). Currently, the function only allocates prz->old_log when it is NULL, but it unconditionally updates prz->old_log_size to the current buffer size and then performs memcpy_fromio() using this new size. If the buffer size has grown since the first allocation (which can happen across different kernel boot cycles), this leads to: 1. A heap buffer overflow (OOB write) in the memcpy_fromio() calls 2. A subsequent OOB read when ramoops_pstore_read() accesses the buffer using the incorrect (larger) old_log_size The KASAN splat would look similar to: BUG: KASAN: slab-out-of-bounds in ramoops_pstore_read+0x... Read of size N at addr ... by task ... The conditions are likely extremely hard to hit: 0. Crash with a ramoops write of less-than-record-max-size bytes. 1. Reboot: ramoops registers, pstore_get_records(0) reads old crash, allocates old_log with size X 2. Crash handler registered, timer started (if pstore_update_ms >= 0) 3. Oops happens (non-fatal, system continues) 4. pstore_dump() writes oops via ramoops_pstore_write() size Y (>X) 5. pstore_new_entry = 1, pstore_timer_kick() called 6. System continues running (not a panic oops) 7. Timer fires after pstore_update_ms milliseconds 8. pstore_timefunc() → schedule_work() → pstore_dowork() → pstore_get_records(1) 9. ramoops_get_next_prz() → persistent_ram_save_old() 10. buffer_size() returns Y, but old_log is X bytes 11. Y > X: memcpy_fromio() overflows heap Requirements: - a prior crash record exists that did not fill the record size (almost impossible since the crash handler writes as much as it can possibly fit into the record, capped by max record size and the kmsg buffer almost always exceeds the max record size) - pstore_update_ms >= 0 (disabled by default) - Non-fatal oops (system survives) Free and reallocate the buffer when the new size differs from the previously allocated size. This ensures old_log always has sufficient space for the data being copied.