In the Linux kernel, the following vulnerability has been resolved: net: qualcomm: rmnet: fix endpoint use-after-free in rmnet_dellink() rmnet_dellink() removes the endpoint from the hash table with hlist_del_init_rcu() and then immediately frees it with kfree(). However, RCU readers on the receive path (rmnet_rx_handler -> __rmnet_map_ingress_handler) may still hold a reference to the endpoint and dereference ep->egress_dev after the memory has been freed. The endpoint is a kmalloc-32 object, and the stale read at offset 8 corresponds to the egress_dev pointer. BUG: unable to handle page fault for address: ffffffffde942eef Oops: 0002 [#1] SMP NOPTI CPU: 1 UID: 0 PID: 137 Comm: poc_write Not tainted 7.0.0+ #4 PREEMPTLAZY RIP: 0010:rmnet_vnd_rx_fixup (rmnet_vnd.c:27) Call Trace: <TASK> __rmnet_map_ingress_handler (rmnet_handlers.c:48 rmnet_handlers.c:101) rmnet_rx_handler (rmnet_handlers.c:129 rmnet_handlers.c:235) __netif_receive_skb_core.constprop.0 (net/core/dev.c:6096) __netif_receive_skb_one_core (net/core/dev.c:6208) netif_receive_skb (net/core/dev.c:6467) tun_get_user (drivers/net/tun.c:1955) tun_chr_write_iter (drivers/net/tun.c:2003) vfs_write (fs/read_write.c:688) ksys_write (fs/read_write.c:740) </TASK> Add an rcu_head field to struct rmnet_endpoint and replace kfree() with kfree_rcu() so the endpoint memory remains valid through the RCU grace period. Also remove the rmnet_vnd_dellink() call and inline only the nr_rmnet_devs decrement, since rmnet_vnd_dellink() would set ep->egress_dev to NULL during the grace period, creating a data race with lockless readers.

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix potential UAF in smb2_is_network_name_deleted() Skip sessions that are being teared down (status == SES_EXITING) to avoid UAF.

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: check/clear fast rx for non-4addr sta VLAN changes When moving a station out of a VLAN and deleting the VLAN afterwards, the fast_rx entry still holds a pointer to the VLAN's netdev, which can cause use-after-free bugs. Fix this by immediately calling ieee80211_check_fast_rx after the VLAN change.

In the Linux kernel, the following vulnerability has been resolved: af_unix: Don't leave consecutive consumed OOB skbs. Jann Horn reported a use-after-free in unix_stream_read_generic(). The following sequences reproduce the issue: $ python3 from socket import * s1, s2 = socketpair(AF_UNIX, SOCK_STREAM) s1.send(b'x', MSG_OOB) s2.recv(1, MSG_OOB) # leave a consumed OOB skb s1.send(b'y', MSG_OOB) s2.recv(1, MSG_OOB) # leave a consumed OOB skb s1.send(b'z', MSG_OOB) s2.recv(1) # recv 'z' illegally s2.recv(1, MSG_OOB) # access 'z' skb (use-after-free) Even though a user reads OOB data, the skb holding the data stays on the recv queue to mark the OOB boundary and break the next recv(). After the last send() in the scenario above, the sk2's recv queue has 2 leading consumed OOB skbs and 1 real OOB skb. Then, the following happens during the next recv() without MSG_OOB 1. unix_stream_read_generic() peeks the first consumed OOB skb 2. manage_oob() returns the next consumed OOB skb 3. unix_stream_read_generic() fetches the next not-yet-consumed OOB skb 4. unix_stream_read_generic() reads and frees the OOB skb , and the last recv(MSG_OOB) triggers KASAN splat. The 3. above occurs because of the SO_PEEK_OFF code, which does not expect unix_skb_len(skb) to be 0, but this is true for such consumed OOB skbs. while (skip >= unix_skb_len(skb)) { skip -= unix_skb_len(skb); skb = skb_peek_next(skb, &sk->sk_receive_queue); ... } In addition to this use-after-free, there is another issue that ioctl(SIOCATMARK) does not function properly with consecutive consumed OOB skbs. So, nothing good comes out of such a situation. Instead of complicating manage_oob(), ioctl() handling, and the next ECONNRESET fix by introducing a loop for consecutive consumed OOB skbs, let's not leave such consecutive OOB unnecessarily. Now, while receiving an OOB skb in unix_stream_recv_urg(), if its previous skb is a consumed OOB skb, it is freed. [0]: BUG: KASAN: slab-use-after-free in unix_stream_read_actor (net/unix/af_unix.c:3027) Read of size 4 at addr ffff888106ef2904 by task python3/315 CPU: 2 UID: 0 PID: 315 Comm: python3 Not tainted 6.16.0-rc1-00407-gec315832f6f9 #8 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-4.fc42 04/01/2014 Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:122) print_report (mm/kasan/report.c:409 mm/kasan/report.c:521) kasan_report (mm/kasan/report.c:636) unix_stream_read_actor (net/unix/af_unix.c:3027) unix_stream_read_generic (net/unix/af_unix.c:2708 net/unix/af_unix.c:2847) unix_stream_recvmsg (net/unix/af_unix.c:3048) sock_recvmsg (net/socket.c:1063 (discriminator 20) net/socket.c:1085 (discriminator 20)) __sys_recvfrom (net/socket.c:2278) __x64_sys_recvfrom (net/socket.c:2291 (discriminator 1) net/socket.c:2287 (discriminator 1) net/socket.c:2287 (discriminator 1)) do_syscall_64 (arch/x86/entry/syscall_64.c:63 (discriminator 1) arch/x86/entry/syscall_64.c:94 (discriminator 1)) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) RIP: 0033:0x7f8911fcea06 Code: 5d e8 41 8b 93 08 03 00 00 59 5e 48 83 f8 fc 75 19 83 e2 39 83 fa 08 75 11 e8 26 ff ff ff 66 0f 1f 44 00 00 48 8b 45 10 0f 05 <48> 8b 5d f8 c9 c3 0f 1f 40 00 f3 0f 1e fa 55 48 89 e5 48 83 ec 08 RSP: 002b:00007fffdb0dccb0 EFLAGS: 00000202 ORIG_RAX: 000000000000002d RAX: ffffffffffffffda RBX: 00007fffdb0dcdc8 RCX: 00007f8911fcea06 RDX: 0000000000000001 RSI: 00007f8911a5e060 RDI: 0000000000000006 RBP: 00007fffdb0dccd0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000202 R12: 00007f89119a7d20 R13: ffffffffc4653600 R14: 0000000000000000 R15: 0000000000000000 </TASK> Allocated by task 315: kasan_save_stack (mm/kasan/common.c:48) kasan_save_track (mm/kasan/common.c:60 (discriminator 1) mm/kasan/common.c:69 (discriminator 1)) __kasan_slab_alloc (mm/kasan/common.c:348) kmem_cache_alloc_ ---truncated---

In the Linux kernel, the following vulnerability has been resolved: bpf: Protect against int overflow for stack access size This patch re-introduces protection against the size of access to stack memory being negative; the access size can appear negative as a result of overflowing its signed int representation. This should not actually happen, as there are other protections along the way, but we should protect against it anyway. One code path was missing such protections (fixed in the previous patch in the series), causing out-of-bounds array accesses in check_stack_range_initialized(). This patch causes the verification of a program with such a non-sensical access size to fail. This check used to exist in a more indirect way, but was inadvertendly removed in a833a17aeac7.

In the Linux kernel, the following vulnerability has been resolved: ice: fix memory corruption bug with suspend and rebuild The ice driver would previously panic after suspend. This is caused from the driver *only* calling the ice_vsi_free_q_vectors() function by itself, when it is suspending. Since commit b3e7b3a6ee92 ("ice: prevent NULL pointer deref during reload") the driver has zeroed out num_q_vectors, and only restored it in ice_vsi_cfg_def(). This further causes the ice_rebuild() function to allocate a zero length buffer, after which num_q_vectors is updated, and then the new value of num_q_vectors is used to index into the zero length buffer, which corrupts memory. The fix entails making sure all the code referencing num_q_vectors only does so after it has been reset via ice_vsi_cfg_def(). I didn't perform a full bisect, but I was able to test against 6.1.77 kernel and that ice driver works fine for suspend/resume with no panic, so sometime since then, this problem was introduced. Also clean up an un-needed init of a local variable in the function being modified. PANIC from 6.8.0-rc1: [1026674.915596] PM: suspend exit [1026675.664697] ice 0000:17:00.1: PTP reset successful [1026675.664707] ice 0000:17:00.1: 2755 msecs passed between update to cached PHC time [1026675.667660] ice 0000:b1:00.0: PTP reset successful [1026675.675944] ice 0000:b1:00.0: 2832 msecs passed between update to cached PHC time [1026677.137733] ixgbe 0000:31:00.0 ens787: NIC Link is Up 1 Gbps, Flow Control: None [1026677.190201] BUG: kernel NULL pointer dereference, address: 0000000000000010 [1026677.192753] ice 0000:17:00.0: PTP reset successful [1026677.192764] ice 0000:17:00.0: 4548 msecs passed between update to cached PHC time [1026677.197928] #PF: supervisor read access in kernel mode [1026677.197933] #PF: error_code(0x0000) - not-present page [1026677.197937] PGD 1557a7067 P4D 0 [1026677.212133] ice 0000:b1:00.1: PTP reset successful [1026677.212143] ice 0000:b1:00.1: 4344 msecs passed between update to cached PHC time [1026677.212575] [1026677.243142] Oops: 0000 [#1] PREEMPT SMP NOPTI [1026677.247918] CPU: 23 PID: 42790 Comm: kworker/23:0 Kdump: loaded Tainted: G W 6.8.0-rc1+ #1 [1026677.257989] Hardware name: Intel Corporation M50CYP2SBSTD/M50CYP2SBSTD, BIOS SE5C620.86B.01.01.0005.2202160810 02/16/2022 [1026677.269367] Workqueue: ice ice_service_task [ice] [1026677.274592] RIP: 0010:ice_vsi_rebuild_set_coalesce+0x130/0x1e0 [ice] [1026677.281421] Code: 0f 84 3a ff ff ff 41 0f b7 74 ec 02 66 89 b0 22 02 00 00 81 e6 ff 1f 00 00 e8 ec fd ff ff e9 35 ff ff ff 48 8b 43 30 49 63 ed <41> 0f b7 34 24 41 83 c5 01 48 8b 3c e8 66 89 b7 aa 02 00 00 81 e6 [1026677.300877] RSP: 0018:ff3be62a6399bcc0 EFLAGS: 00010202 [1026677.306556] RAX: ff28691e28980828 RBX: ff28691e41099828 RCX: 0000000000188000 [1026677.314148] RDX: 0000000000000000 RSI: 0000000000000010 RDI: ff28691e41099828 [1026677.321730] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 [1026677.329311] R10: 0000000000000007 R11: ffffffffffffffc0 R12: 0000000000000010 [1026677.336896] R13: 0000000000000000 R14: 0000000000000000 R15: ff28691e0eaa81a0 [1026677.344472] FS: 0000000000000000(0000) GS:ff28693cbffc0000(0000) knlGS:0000000000000000 [1026677.353000] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [1026677.359195] CR2: 0000000000000010 CR3: 0000000128df4001 CR4: 0000000000771ef0 [1026677.366779] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [1026677.374369] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [1026677.381952] PKRU: 55555554 [1026677.385116] Call Trace: [1026677.388023] <TASK> [1026677.390589] ? __die+0x20/0x70 [1026677.394105] ? page_fault_oops+0x82/0x160 [1026677.398576] ? do_user_addr_fault+0x65/0x6a0 [1026677.403307] ? exc_page_fault+0x6a/0x150 [1026677.407694] ? asm_exc_page_fault+0x22/0x30 [1026677.412349] ? ice_vsi_rebuild_set_coalesce+0x130/0x1e0 [ice] [1026677.4186 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: msft: fix slab-use-after-free in msft_do_close() Tying the msft->data lifetime to hdev by freeing it in hci_release_dev() to fix the following case: [use] msft_do_close() msft = hdev->msft_data; if (!msft) ...(1) <- passed. return; mutex_lock(&msft->filter_lock); ...(4) <- used after freed. [free] msft_unregister() msft = hdev->msft_data; hdev->msft_data = NULL; ...(2) kfree(msft); ...(3) <- msft is freed. ================================================================== BUG: KASAN: slab-use-after-free in __mutex_lock_common kernel/locking/mutex.c:587 [inline] BUG: KASAN: slab-use-after-free in __mutex_lock+0x8f/0xc30 kernel/locking/mutex.c:752 Read of size 8 at addr ffff888106cbbca8 by task kworker/u5:2/309

In the Linux kernel, the following vulnerability has been resolved: rcu/nocb: Fix WARN_ON_ONCE() in the rcu_nocb_bypass_lock() For the kernels built with CONFIG_RCU_NOCB_CPU_DEFAULT_ALL=y and CONFIG_RCU_LAZY=y, the following scenarios will trigger WARN_ON_ONCE() in the rcu_nocb_bypass_lock() and rcu_nocb_wait_contended() functions: CPU2 CPU11 kthread rcu_nocb_cb_kthread ksys_write rcu_do_batch vfs_write rcu_torture_timer_cb proc_sys_write __kmem_cache_free proc_sys_call_handler kmemleak_free drop_caches_sysctl_handler delete_object_full drop_slab __delete_object shrink_slab put_object lazy_rcu_shrink_scan call_rcu rcu_nocb_flush_bypass __call_rcu_commn rcu_nocb_bypass_lock raw_spin_trylock(&rdp->nocb_bypass_lock) fail atomic_inc(&rdp->nocb_lock_contended); rcu_nocb_wait_contended WARN_ON_ONCE(smp_processor_id() != rdp->cpu); WARN_ON_ONCE(atomic_read(&rdp->nocb_lock_contended)) | |_ _ _ _ _ _ _ _ _ _same rdp and rdp->cpu != 11_ _ _ _ _ _ _ _ _ __| Reproduce this bug with "echo 3 > /proc/sys/vm/drop_caches". This commit therefore uses rcu_nocb_try_flush_bypass() instead of rcu_nocb_flush_bypass() in lazy_rcu_shrink_scan(). If the nocb_bypass queue is being flushed, then rcu_nocb_try_flush_bypass will return directly.

In the Linux kernel, the following vulnerability has been resolved: drm/i915/gt: Fix timeline left held on VMA alloc error The following error has been reported sporadically by CI when a test unbinds the i915 driver on a ring submission platform: <4> [239.330153] ------------[ cut here ]------------ <4> [239.330166] i915 0000:00:02.0: [drm] drm_WARN_ON(dev_priv->mm.shrink_count) <4> [239.330196] WARNING: CPU: 1 PID: 18570 at drivers/gpu/drm/i915/i915_gem.c:1309 i915_gem_cleanup_early+0x13e/0x150 [i915] ... <4> [239.330640] RIP: 0010:i915_gem_cleanup_early+0x13e/0x150 [i915] ... <4> [239.330942] Call Trace: <4> [239.330944] <TASK> <4> [239.330949] i915_driver_late_release+0x2b/0xa0 [i915] <4> [239.331202] i915_driver_release+0x86/0xa0 [i915] <4> [239.331482] devm_drm_dev_init_release+0x61/0x90 <4> [239.331494] devm_action_release+0x15/0x30 <4> [239.331504] release_nodes+0x3d/0x120 <4> [239.331517] devres_release_all+0x96/0xd0 <4> [239.331533] device_unbind_cleanup+0x12/0x80 <4> [239.331543] device_release_driver_internal+0x23a/0x280 <4> [239.331550] ? bus_find_device+0xa5/0xe0 <4> [239.331563] device_driver_detach+0x14/0x20 ... <4> [357.719679] ---[ end trace 0000000000000000 ]--- If the test also unloads the i915 module then that's followed with: <3> [357.787478] ============================================================================= <3> [357.788006] BUG i915_vma (Tainted: G U W N ): Objects remaining on __kmem_cache_shutdown() <3> [357.788031] ----------------------------------------------------------------------------- <3> [357.788204] Object 0xffff888109e7f480 @offset=29824 <3> [357.788670] Allocated in i915_vma_instance+0xee/0xc10 [i915] age=292729 cpu=4 pid=2244 <4> [357.788994] i915_vma_instance+0xee/0xc10 [i915] <4> [357.789290] init_status_page+0x7b/0x420 [i915] <4> [357.789532] intel_engines_init+0x1d8/0x980 [i915] <4> [357.789772] intel_gt_init+0x175/0x450 [i915] <4> [357.790014] i915_gem_init+0x113/0x340 [i915] <4> [357.790281] i915_driver_probe+0x847/0xed0 [i915] <4> [357.790504] i915_pci_probe+0xe6/0x220 [i915] ... Closer analysis of CI results history has revealed a dependency of the error on a few IGT tests, namely: - igt@api_intel_allocator@fork-simple-stress-signal, - igt@api_intel_allocator@two-level-inception-interruptible, - igt@gem_linear_blits@interruptible, - igt@prime_mmap_coherency@ioctl-errors, which invisibly trigger the issue, then exhibited with first driver unbind attempt. All of the above tests perform actions which are actively interrupted with signals. Further debugging has allowed to narrow that scope down to DRM_IOCTL_I915_GEM_EXECBUFFER2, and ring_context_alloc(), specific to ring submission, in particular. If successful then that function, or its execlists or GuC submission equivalent, is supposed to be called only once per GEM context engine, followed by raise of a flag that prevents the function from being called again. The function is expected to unwind its internal errors itself, so it may be safely called once more after it returns an error. In case of ring submission, the function first gets a reference to the engine's legacy timeline and then allocates a VMA. If the VMA allocation fails, e.g. when i915_vma_instance() called from inside is interrupted with a signal, then ring_context_alloc() fails, leaving the timeline held referenced. On next I915_GEM_EXECBUFFER2 IOCTL, another reference to the timeline is got, and only that last one is put on successful completion. As a consequence, the legacy timeline, with its underlying engine status page's VMA object, is still held and not released on driver unbind. Get the legacy timeline only after successful allocation of the context engine's VMA. v2: Add a note on other submission methods (Krzysztof Karas): Both execlists and GuC submission use lrc_alloc() which seems free from a similar issue. (cherry picked from commit cc43422b3cc79eacff4c5a8ba0d224688ca9dd4f)

In the Linux kernel, the following vulnerability has been resolved: ipv4: igmp: remove multicast group from hash table on device destruction When a device is destroyed under RTNL, ip_mc_destroy_dev() iterates through the multicast list and calls ip_ma_put() on each membership, scheduling them for RCU reclamation. However, they are not unlinked from the device's multicast hash table (mc_hash). Since the device remains published in dev->ip_ptr until after ip_mc_destroy_dev() completes, concurrent RCU readers traversing mc_hash can still locate and access the multicast group after its refcount is decremented. If the RCU callback runs and frees the group while a reader is accessing it, a use-after-free occurs. Fix this by unlinking the multicast group from mc_hash using ip_mc_hash_remove() before scheduling it for reclamation. BUG: KASAN: slab-use-after-free in ip_check_mc_rcu+0x149/0x3f0 Read of size 4 at addr ffff888009bf1408 by task mausezahn/2276 Call Trace: <IRQ> dump_stack_lvl+0x67/0x90 print_report+0x175/0x7c0 kasan_report+0x147/0x180 ip_check_mc_rcu+0x149/0x3f0 udp_v4_early_demux+0x36d/0x12d0 ip_rcv_finish_core+0xb8b/0x1390 ip_rcv_finish+0x54/0x120 NF_HOOK+0x213/0x2b0 __netif_receive_skb+0x126/0x340 process_backlog+0x4f2/0xf00 __napi_poll+0x92/0x2c0 net_rx_action+0x583/0xc60 handle_softirqs+0x236/0x7f0 do_softirq+0x57/0x80 </IRQ> Allocated by task 2239: kasan_save_track+0x3e/0x80 __kasan_kmalloc+0x72/0x90 ____ip_mc_inc_group+0x31a/0xa40 __ip_mc_join_group+0x334/0x3f0 do_ip_setsockopt+0x16fa/0x2010 ip_setsockopt+0x3f/0x90 do_sock_setsockopt+0x1ad/0x300 Freed by task 0: kasan_save_track+0x3e/0x80 kasan_save_free_info+0x40/0x50 __kasan_slab_free+0x3a/0x60 __rcu_free_sheaf_prepare+0xd4/0x220 rcu_free_sheaf+0x36/0x190 rcu_core+0x8d9/0x12f0 handle_softirqs+0x236/0x7f0

In the Linux kernel, the following vulnerability has been resolved: ntfs: avoid calling post_write_mst_fixup() for invalid index_block ntfs_icx_ib_sync_write() calls post_write_mst_fixup() when ntfs_ib_write() returns an error, intending to restore the buffer after a failed write. However, ntfs_ib_write() returns an error immediately if pre_write_mst_fixup() validation fails. The caller, ntfs_icx_ib_sync_write(), interprets any error as a write failure requiring rollback. It does not differentiate between I/O errors and validation failures, and calls post_write_mst_fixup() anyway. Since post_write_mst_fixup() assumes that the index_block contents is correct, it doesn't perform the boundary checks, which results in out-of-bounds memory access. An attacker can craft a malicious NTFS image with: - large index_block.usa_ofs offset, pointing outside the ntfs_record - index_block.usa_count = 0, causing integer underflow - or index_block.usa_count larger than actual number of sectors in the ntfs_record, causing out-of-bounds access KASAN reports describing the memory corruption: ================================================================== BUG: KASAN: slab-out-of-bounds in post_write_mst_fixup+0x19c/0x1d0 Read of size 2 at addr ffff8881586c9018 by task p/9428 Call Trace: <TASK> dump_stack_lvl+0x100/0x190 print_report+0x139/0x4ad ? post_write_mst_fixup+0x19c/0x1d0 ? __virt_addr_valid+0x262/0x500 ? post_write_mst_fixup+0x19c/0x1d0 kasan_report+0xe4/0x1d0 ? post_write_mst_fixup+0x19c/0x1d0 post_write_mst_fixup+0x19c/0x1d0 ntfs_icx_ib_sync_write+0x179/0x220 ntfs_inode_sync_filename+0x83d/0x1080 __ntfs_write_inode+0x1049/0x1480 ntfs_file_fsync+0x131/0x9b0 ================================================================== BUG: KASAN: slab-out-of-bounds in post_write_mst_fixup+0x1aa/0x1d0 Write of size 2 at addr ffff8881586c91fe by task p/9428 Call Trace: <TASK> dump_stack_lvl+0x100/0x190 print_report+0x139/0x4ad ? post_write_mst_fixup+0x1aa/0x1d0 ? __virt_addr_valid+0x262/0x500 ? post_write_mst_fixup+0x1aa/0x1d0 kasan_report+0xe4/0x1d0 ? post_write_mst_fixup+0x1aa/0x1d0 post_write_mst_fixup+0x1aa/0x1d0 ntfs_icx_ib_sync_write+0x179/0x220 ntfs_inode_sync_filename+0x83d/0x1080 __ntfs_write_inode+0x1049/0x1480 ntfs_file_fsync+0x131/0x9b0 ================================================================== Let's move the post_write_mst_fixup() call to ntfs_ib_write(). The ntfs_ib_write() function calls pre_write_mst_fixup() at the beginning. If the index_block contents is invalid, pre_write_mst_fixup() fails and ntfs_ib_write() returns early without calling post_write_mst_fixup() on bad index_block.

In the Linux kernel, the following vulnerability has been resolved: staging: media: ipu7: fix double-free and use-after-free in error paths In both ipu7_isys_init() and ipu7_psys_init(), pdata is allocated and then passed to ipu7_bus_initialize_device(), which stores it in adev->pdata. The ipu7_bus_release() function frees adev->pdata when the device's reference count drops to zero. Two error paths incorrectly call kfree(pdata) after the device teardown has already freed it: 1. When ipu7_mmu_init() fails: put_device() is called, which drops the reference count to zero and triggers ipu7_bus_release() -> kfree(pdata). The subsequent kfree(pdata) is a double-free. 2. When ipu7_bus_add_device() fails: it calls auxiliary_device_uninit() internally, which calls put_device() -> ipu7_bus_release() -> kfree(pdata). The subsequent kfree(pdata) is again a double-free. Note that the kfree(pdata) when ipu7_bus_initialize_device() itself fails is correct, because in that case auxiliary_device_init() failed and the release function was never set up, so pdata must be freed manually. Additionally, the error code was not saved before calling put_device(), causing ERR_CAST() to dereference the already-freed adev pointer when constructing the return value. Fix this by saving the error from dev_err_probe() before put_device() and returning ERR_PTR() instead. Remove the redundant kfree(pdata) calls and fix the use-after-free in the return values of the two affected error paths.

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix potential UAF in is_valid_oplock_break() Skip sessions that are being teared down (status == SES_EXITING) to avoid UAF.

In the Linux kernel, the following vulnerability has been resolved: staging: vme_user: bound slave read/write to the kern_buf size The SLAVE-path helpers buffer_to_user() and buffer_from_user() copy 'count' bytes into/out of the fixed-size kern_buf (size_buf == PCI_BUF_SIZE == 0x20000, 128 KiB) using *ppos as the offset, without bounding *ppos + count against size_buf. vme_user_write()/vme_user_read() only clamp count to the VME window size (image_size = vme_get_size(resource)), which VME_SET_SLAVE sets from the user-supplied slave.size -- validated against the VME address space (up to VME_A32_MAX = 4 GiB), not against PCI_BUF_SIZE. When the window exceeds 128 KiB, a write()/read() copies past the kern_buf allocation. Clamp count against size_buf in both helpers, with an early return when *ppos is already at/after the buffer end. *ppos is >= 0 here (the caller rejects negative offsets), so size_buf - *ppos cannot wrap. This mirrors the existing clamp in the MASTER-path helpers resource_to_user() / resource_from_user(), and matches the read()/write() convention of a short transfer at end-of-buffer. Found by static analysis (CodeQL taint tracking + CBMC bounded model checking) and confirmed dynamically under KASAN with the vme_fake bridge: BUG: KASAN: slab-out-of-bounds in _copy_from_user+0x2d/0x80 Write of size 262144 at addr ffff888004100000 by task trigger/68 _copy_from_user+0x2d/0x80 vme_user_write+0x13e/0x240 [vme_user] vfs_write+0x1b8/0x7a0 ksys_write+0xb8/0x150

In the Linux kernel, the following vulnerability has been resolved: binder: fix UAF in binder_thread_release() When a thread exits, binder_thread_release() walks its transaction stack to clear the t->from and t->to_proc that correspond with the exiting thread. However, a process dying in parallel might attempt to kfree some of these transactions. And if one of them has no associated t->to_proc, the t->to_proc->inner_lock will not be acquired. This means that transaction accesses in binder_thread_release() after t->to_proc has been cleared might race with binder_free_transaction() and cause a use-after-free error as reported by KASAN: ================================================================== BUG: KASAN: slab-use-after-free in binder_thread_release+0x5d0/0x798 Write of size 8 at addr ffff000016627500 by task X/715 CPU: 17 UID: 0 PID: 715 Comm: X Not tainted 7.1.0-rc5-00149-g8fde5d1d47f6 #30 PREEMPT Hardware name: linux,dummy-virt (DT) Call trace: binder_thread_release+0x5d0/0x798 binder_ioctl+0x12c0/0x299c [...] Allocated by task 717 on cpu 18 at 67.267803s: __kasan_kmalloc+0xa0/0xbc __kmalloc_cache_noprof+0x174/0x444 binder_transaction+0x554/0x8150 binder_thread_write+0xa30/0x4354 binder_ioctl+0x20f0/0x299c [...] Freed by task 202 on cpu 18 at 90.416221s: __kasan_slab_free+0x58/0x80 kfree+0x1a0/0x4a4 binder_free_transaction+0x150/0x294 binder_send_failed_reply+0x398/0x6d8 binder_release_work+0x3e4/0x4ec binder_deferred_func+0xbd8/0x104c [...] ================================================================== In order to avoid this, make sure that binder_free_transaction() reads the t->to_proc under the transaction lock. This will serialize the transaction release with the accesses in binder_thread_release(). Plus, it matches the documented locking rules for @to_proc.

In the Linux kernel, the following vulnerability has been resolved: iio: adc: ad_sigma_delta: fix clear_pending_event for registerless devices ad_sigma_delta_clear_pending_event() falls through to the status register read path for devices with has_registers = false and no rdy_gpiod. For such devices, ad_sd_read_reg() skips the address byte entirely and clocks raw MISO bytes with no address phase — making it byte-for-byte identical to reading conversion data. If a pending conversion result is present, this partially consumes it and corrupts the data stream for the subsequent ad_sd_read_reg() call in ad_sigma_delta_single_conversion(). Furthermore, with num_resetclks = 0 on these devices, data_read_len evaluates to 0. If the clocked byte has bit 7 clear, pending_event is set and the code attempts memset(data + 2, 0xff, 0 - 1), overflowing to SIZE_MAX and corrupting the heap. Fix by returning 0 immediately when neither rdy_gpiod nor has_registers is set. This is safe for all current registerless devices: ad7191 and ad7780 (with powerdown GPIO) are reset between conversions by CS deassertion, so there is no stale result to drain; ad7780 (without powerdown GPIO) and max11205 are continuously-converting and cycle ~DRDY at the output data rate regardless of whether the previous result was read, so the next falling edge fires naturally. A future registerless device that holds ~DRDY asserted until data is read would be broken by this early return and would require either num_resetclks set or a rdy-gpio. The same heap corruption is reachable on any device with rdy_gpiod set but num_resetclks = 0: if the GPIO indicates a pending event, the drain path executes memset(data + 2, 0xff, 0 - 1) regardless of has_registers. Add an explicit data_read_len == 0 guard after the pending event check; the stale result is then consumed by the first ad_sd_read_reg() call in ad_sigma_delta_single_conversion().

In the Linux kernel, the following vulnerability has been resolved: irqchip/gic-v3-its: Prevent double free on error The error handling path in its_vpe_irq_domain_alloc() causes a double free when its_vpe_init() fails after successfully allocating at least one interrupt. This happens because its_vpe_irq_domain_free() frees the interrupts along with the area bitmap and the vprop_page and its_vpe_irq_domain_alloc() subsequently frees the area bitmap and the vprop_page again. Fix this by unconditionally invoking its_vpe_irq_domain_free() which handles all cases correctly and by removing the bitmap/vprop_page freeing from its_vpe_irq_domain_alloc(). [ tglx: Massaged change log ]

In the Linux kernel, the following vulnerability has been resolved: netfilter: ipset: fix race between dump and ip_set_list resize The release path of ip_set_dump_do() and ip_set_dump_done() read inst->ip_set_list via ip_set_ref_netlink(), a plain rcu_dereference_raw() of the array pointer. These run from netlink_recvmsg() without the nfnl mutex and without an RCU read-side critical section. A concurrent ip_set_create() can grow the array: it publishes the new array, calls synchronize_net() and then kvfree()s the old one. Since the dump paths read the array outside any RCU reader, synchronize_net() does not wait for them and the old array can be freed while they still index into it, causing a use-after-free. The dumped set itself stays pinned via set->ref_netlink, so only the array load needs protecting. Take rcu_read_lock() around it, matching ip_set_get_byname() and __ip_set_put_byindex(). BUG: KASAN: slab-use-after-free in ip_set_dump_do (net/netfilter/ipset/ip_set_core.c:1697) Read of size 8 at addr ffff88800b5c4018 by task exploit/150 Call Trace: ... kasan_report (mm/kasan/report.c:595) ip_set_dump_do (net/netfilter/ipset/ip_set_core.c:1697) netlink_dump (net/netlink/af_netlink.c:2325) netlink_recvmsg (net/netlink/af_netlink.c:1976) sock_recvmsg (net/socket.c:1159) __sys_recvfrom (net/socket.c:2315) ... Oops: general protection fault, probably for non-canonical address ... KASAN NOPTI KASAN: maybe wild-memory-access in range [0x02d6...d0-0x02d6...d7] RIP: 0010:ip_set_dump_do (net/netfilter/ipset/ip_set_core.c:1698) Kernel panic - not syncing: Fatal exception

In the Linux kernel, the following vulnerability has been resolved: xfs: resample the data fork mapping after cycling ILOCK xfs_reflink_fill_{cow_hole,delalloc} are both presented with an inode, a data fork mapping, and a cow fork mapping. Unfortunately, these two helpers cycle the ILOCK to grab a transaction, which means that the mappings are stale as soon as we reacquire the ILOCK. Currently we refresh the cow fork mapping by re-calling xfs_find_trim_cow_extent, but we don't refresh the data fork mapping beforehand, which means that the xfs_bmap_trim_cow in that function queries the refcount btree about the wrong physical blocks and returns an inaccurate value in *shared. If *shared is now false, the directio write proceeds with a stale data fork mapping. Fix this by querying the data fork mapping if the sequence counter changes across the ILOCK cycle.

In the Linux kernel, the following vulnerability has been resolved: netfs: Fix overrun check in netfs_extract_user_iter() Fix netfs_extract_user_iter() so that if iov_iter_extract_pages() overfills pages[], then those pages don't get included in the iterator constructed at the end of the function. If there was an overfill, memory corruption has already happened.

In the Linux kernel, the following vulnerability has been resolved: batman-adv: bla: fix report_work leak on backbone_gw purge batadv_bla_purge_backbone_gw() removes stale backbone gateway entries, but fails to properly handle their associated report_work: - If report_work is running, the purge must wait for it to finish before freeing the backbone_gw, otherwise the worker may access freed memory (e.g. bat_priv). - If report_work is pending, the purge must cancel it and release the reference held for that pending work item. The previous implementation called hlist_for_each_entry_safe() inside a spin_lock_bh() section, but cancel_work_sync() may sleep and therefore cannot be called from within a spinlock-protected region. Restructure the loop to handle one entry per spinlock critical section: acquire the lock, find the next entry to purge, remove it from the hash list, then release the lock before calling cancel_work_sync() and dropping the hash_entry reference. Repeat until no more entries require purging.

In the Linux kernel, the following vulnerability has been resolved: spi: ti-qspi: fix use-after-free after DMA setup failure The driver falls back to PIO mode if DMA setup fails during probe. Make sure to clear the DMA channel pointer also if buffer allocation fails to avoid passing a pointer to the released channel to the DMA engine (or trying to free the channel a second time on late probe errors or driver unbind). This issue was flagged by Sashiko when reviewing a devres allocation conversion patch.

In the Linux kernel, the following vulnerability has been resolved: sched_ext: Avoid UAF in scx_root_enable_workfn() init failure path In scx_root_enable_workfn(), put_task_struct(p) is called before scx_error() dereferences p->comm and p->pid. If the iterator's reference is the last drop, the task is freed synchronously and the deref becomes a UAF. Move put_task_struct() past scx_error().

In the Linux kernel, the following vulnerability has been resolved: pwrseq: core: fix use-after-free in pwrseq_debugfs_seq_next() pwrseq_debugfs_seq_next() declares 'next' with __free(put_device), which causes put_device() to be called on the returned pointer when the variable goes out of scope. This results in a use-after-free since the seq_file framework receives a pointer whose reference has already been dropped. Simply removing __free(put_device) would fix the UAF but would leak the reference acquired by bus_find_next_device(), as stop() only calls up_read(&pwrseq_sem) and never releases the device reference. Fix this by making the reference counting consistent across all seq_file callbacks, matching the standard pattern used by PCI and SCSI: - start(): use get_device() so it returns a referenced pointer. - next(): explicitly put_device(curr) to release the previous device's reference (no NULL check needed - the seq_file framework only calls next() while the previous return was non-NULL). - stop(): put_device(data) to release the last iterated device's reference, with a NULL guard since stop() may be called with NULL when start() returned NULL or next() reached end-of-sequence.

In the Linux kernel, the following vulnerability has been resolved: fuse-uring: make a fuse_req on SQE commit only findable after memcpy Bad userspace might try to trick us and send commit SQEs request unique / commit-id of requests that are not even send to fuse-server (io_uring_cmd_done() not called) yet. fuse_uring_commit_fetch() ends the fuse request when the ring entry has a wrong state, but that could have caused a use-after-free with the memcpy operations in fuse_uring_send_in_task(). In order to avoid such races the call of fuse_uring_add_to_pq() is moved after the copy operations and just before completing the io-uring request - malicious userspace cannot find the request anymore until all prepration work in fuse-client/kernel is completed. This also moves fuse_uring_add_to_pq() a bit up in the code to avoid a forward declaration. Also not with a preparation commit, to make it easier to back port to older kernels.

In the Linux kernel, the following vulnerability has been resolved: fuse-uring: Avoid queue->stopped races and set/read that value under lock There are several readers of queue->stopped that check the value under lock, but fuse_uring_commit_fetch() did not and actually the value was not set under the lock in fuse_uring_abort_end_requests() either. Especially in fuse_uring_commit_fetch it is important to check under a lock, because due to races 'struct fuse_req' might be freed with fuse_request_end, but another thread/cpu might already do teardown work.

In the Linux kernel, the following vulnerability has been resolved: fuse-uring: Avoid use-after-free in fuse_uring_async_stop_queues fuse_uring_async_stop_queues() might run when the last reference on ring->queue_refs was already dropped. In order to avoid an early destruction a reference on struct fuse_conn is now taken before starting fuse_uring_async_stop_queues() and that reference is only released when that delayed work queue terminates.

In the Linux kernel, the following vulnerability has been resolved: fuse: fix runtime warning on truncate_folio_batch_exceptionals() The WARN_ON_ONCE is introduced on truncate_folio_batch_exceptionals() to capture whether the filesystem has removed all DAX entries or not. And the fix has been applied on the filesystem xfs and ext4 by the commit 0e2f80afcfa6 ("fs/dax: ensure all pages are idle prior to filesystem unmount"). Apply the missed fix on filesystem fuse to fix the runtime warning: [ 2.011450] ------------[ cut here ]------------ [ 2.011873] WARNING: CPU: 0 PID: 145 at mm/truncate.c:89 truncate_folio_batch_exceptionals+0x272/0x2b0 [ 2.012468] Modules linked in: [ 2.012718] CPU: 0 UID: 1000 PID: 145 Comm: weston Not tainted 6.16.0-rc2-WSL2-STABLE #2 PREEMPT(undef) [ 2.013292] RIP: 0010:truncate_folio_batch_exceptionals+0x272/0x2b0 [ 2.013704] Code: 48 63 d0 41 29 c5 48 8d 1c d5 00 00 00 00 4e 8d 6c 2a 01 49 c1 e5 03 eb 09 48 83 c3 08 49 39 dd 74 83 41 f6 44 1c 08 01 74 ef <0f> 0b 49 8b 34 1e 48 89 ef e8 10 a2 17 00 eb df 48 8b 7d 00 e8 35 [ 2.014845] RSP: 0018:ffffa47ec33f3b10 EFLAGS: 00010202 [ 2.015279] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 2.015884] RDX: 0000000000000000 RSI: ffffa47ec33f3ca0 RDI: ffff98aa44f3fa80 [ 2.016377] RBP: ffff98aa44f3fbf0 R08: ffffa47ec33f3ba8 R09: 0000000000000000 [ 2.016942] R10: 0000000000000001 R11: 0000000000000000 R12: ffffa47ec33f3ca0 [ 2.017437] R13: 0000000000000008 R14: ffffa47ec33f3ba8 R15: 0000000000000000 [ 2.017972] FS: 000079ce006afa40(0000) GS:ffff98aade441000(0000) knlGS:0000000000000000 [ 2.018510] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2.018987] CR2: 000079ce03e74000 CR3: 000000010784f006 CR4: 0000000000372eb0 [ 2.019518] Call Trace: [ 2.019729] <TASK> [ 2.019901] truncate_inode_pages_range+0xd8/0x400 [ 2.020280] ? timerqueue_add+0x66/0xb0 [ 2.020574] ? get_nohz_timer_target+0x2a/0x140 [ 2.020904] ? timerqueue_add+0x66/0xb0 [ 2.021231] ? timerqueue_del+0x2e/0x50 [ 2.021646] ? __remove_hrtimer+0x39/0x90 [ 2.022017] ? srso_alias_untrain_ret+0x1/0x10 [ 2.022497] ? psi_group_change+0x136/0x350 [ 2.023046] ? _raw_spin_unlock+0xe/0x30 [ 2.023514] ? finish_task_switch.isra.0+0x8d/0x280 [ 2.024068] ? __schedule+0x532/0xbd0 [ 2.024551] fuse_evict_inode+0x29/0x190 [ 2.025131] evict+0x100/0x270 [ 2.025641] ? _atomic_dec_and_lock+0x39/0x50 [ 2.026316] ? __pfx_generic_delete_inode+0x10/0x10 [ 2.026843] __dentry_kill+0x71/0x180 [ 2.027335] dput+0xeb/0x1b0 [ 2.027725] __fput+0x136/0x2b0 [ 2.028054] __x64_sys_close+0x3d/0x80 [ 2.028469] do_syscall_64+0x6d/0x1b0 [ 2.028832] ? clear_bhb_loop+0x30/0x80 [ 2.029182] ? clear_bhb_loop+0x30/0x80 [ 2.029533] ? clear_bhb_loop+0x30/0x80 [ 2.029902] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 2.030423] RIP: 0033:0x79ce03d0d067 [ 2.030820] Code: b8 ff ff ff ff e9 3e ff ff ff 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 41 c3 48 83 ec 18 89 7c 24 0c e8 c3 a7 f8 ff [ 2.032354] RSP: 002b:00007ffef0498948 EFLAGS: 00000246 ORIG_RAX: 0000000000000003 [ 2.032939] RAX: ffffffffffffffda RBX: 00007ffef0498960 RCX: 000079ce03d0d067 [ 2.033612] RDX: 0000000000000003 RSI: 0000000000001000 RDI: 000000000000000d [ 2.034289] RBP: 00007ffef0498a30 R08: 000000000000000d R09: 0000000000000000 [ 2.034944] R10: 00007ffef0498978 R11: 0000000000000246 R12: 0000000000000001 [ 2.035610] R13: 00007ffef0498960 R14: 000079ce03e09ce0 R15: 0000000000000003 [ 2.036301] </TASK> [ 2.036532] ---[ end trace 0000000000000000 ]---

In the Linux kernel, the following vulnerability has been resolved: fuse: clear intr_entry in fuse_resend and fuse_remove_pending_req When fuse_resend() moves a request from fpq->processing back to fiq->pending, it sets FR_PENDING and clears FR_SENT but does not remove the requests intr_entry from fiq->interrupts. If the request had FR_INTERRUPTED set from a prior signal, intr_entry remains dangling on fiq->interrupts. When the requesting task then receives a fatal signal, fuse_remove_pending_req() sees FR_PENDING=1, removes the request from fiq->pending and frees it via the refcount path, also without cleaning intr_entry. The stale intr_entry causes use-after-free when fuse_read_interrupt() iterates fiq->interrupts: - list_del_init(&req->intr_entry) -> UAF write on freed slab - req->in.h.unique -> UAF read, data leaked to userspace Remove intr_entry from fiq->interrupts in fuse_resend() for interrupted requests before they are placed back on fiq->pending. Add a WARN_ON if the intr_entry is not empty on request destruction.

In the Linux kernel, the following vulnerability has been resolved: fuse: re-lock request before returning from fuse_ref_folio() fuse_ref_folio() unlocks the request but does not re-lock it before returning. fuse_chan_abort() can end the request and the async end callback (eg fuse_writepage_free()) can free the args while the subsequent copy chain logic after fuse_ref_folio() accesses them, leading to use-after-free issues. Fix this by locking the request in fuse_ref_folio() before returning.

In the Linux kernel, the following vulnerability has been resolved: Input: synaptics-rmi4 - bound the F30 keymap to the GPIO/LED count rmi_f30_map_gpios() allocates gpioled_key_map with min(gpioled_count, TRACKSTICK_RANGE_END) == at most 6 entries, but rmi_f30_attention() iterates the full f30->gpioled_count (device query register, range 0..31) and dereferences gpioled_key_map[i], and input->keycodemax is set to the full gpioled_count while input->keycode points at the 6-entry allocation. A device that reports gpioled_count > 6 with GPIO support enabled therefore causes an out-of-bounds read on the attention interrupt and out-of-bounds read/write through the EVIOCGKEYCODE/EVIOCSKEYCODE ioctls, which bound the index only against keycodemax. This is the same defect as the F3A handler, which was copied from F30. Size the keymap for the full gpioled_count; the mapping loop still assigns only the first min(gpioled_count, TRACKSTICK_RANGE_END) entries.

In the Linux kernel, the following vulnerability has been resolved: i2c: core: fix adapter deregistration race Adapters can be looked up by their id using i2c_get_adapter() which takes a reference to the embedded struct device. Remove the adapter from the IDR before tearing it down during deregistration (and on registration failure) to make sure its resources are not accessed after having been freed (e.g. the device name).

In the Linux kernel, the following vulnerability has been resolved: iommufd: Use sizeof(*hdr) instead of sizeof(hdr) in veventq read The bound-check in iommufd_veventq_fops_read() for the normal vEVENT path uses sizeof(hdr) where the surrounding code uses sizeof(*hdr): if (!vevent_for_lost_events_header(cur) && sizeof(hdr) + cur->data_len > count - done) { hdr is declared as struct iommufd_vevent_header *, so sizeof(hdr) evaluates to the size of the pointer. Surrounding code uses sizeof(*hdr) consistently: if (done >= count || sizeof(*hdr) > count - done) { ... if (copy_to_user(buf + done, hdr, sizeof(*hdr))) { ... done += sizeof(*hdr); struct iommufd_vevent_header is currently 8 bytes (two __u32 fields, flags and sequence), so on 64-bit (sizeof(void *) == 8) the two expressions happen to be equal and the check works as intended. On 32-bit (sizeof(void *) == 4) the check under-counts the header by 4 bytes: a vEVENT whose data_len causes 8 + cur->data_len to exceed count - done while 4 + cur->data_len does not will pass the check, then the loop will copy_to_user 8 bytes of header followed by data_len bytes of payload, writing past the user-supplied buffer. It is also a latent bug for any future expansion of struct iommufd_vevent_header beyond sizeof(void *) on 64-bit; the check should not depend on the type happening to match the host pointer width. Use sizeof(*hdr) to match the rest of the function and the actual amount that will be copied.

In the Linux kernel, the following vulnerability has been resolved: exfat: bound uniname advance in exfat_find_dir_entry() In exfat_find_dir_entry(), each TYPE_EXTEND (file name) entry advances the output pointer by a fixed amount while the loop guard only tracks the accumulated name length: if (++order == 2) uniname = p_uniname->name; else uniname += EXFAT_FILE_NAME_LEN; len = exfat_extract_uni_name(ep, entry_uniname); name_len += len; unichar = *(uniname+len); *(uniname+len) = 0x0; uniname grows by EXFAT_FILE_NAME_LEN (15) per name entry, but name_len grows only by the actual extracted length, which is shorter when a name fragment contains an early NUL. The only guard is `name_len >= MAX_NAME_LENGTH`, so a crafted directory with many short name fragments lets uniname run far past the p_uniname->name[MAX_NAME_LENGTH + 3] buffer while name_len stays small, causing an out-of-bounds read and write at *(uniname+len). The sibling extractor exfat_get_uniname_from_ext_entry() already stops on a short fragment (the lockstep `len != EXFAT_FILE_NAME_LEN` guard added in commit d42334578eba ("exfat: check if filename entries exceeds max filename length")); exfat_find_dir_entry() never got the equivalent. Track the per-entry write offset as a count and reject a fragment once the offset, or the offset plus the extracted length, would exceed MAX_NAME_LENGTH, before forming the output pointer.

In the Linux kernel, the following vulnerability has been resolved: perf/aux: Fix page UAF in map_range() map_range() reads rb->aux_pages[], rb->aux_nr_pages and rb->aux_pgoff via perf_mmap_to_page() while holding only event->mmap_mutex. Those fields are serialized by rb->aux_mutex, and mmap_mutex is per event. Thus, two events sharing one rb via PERF_EVENT_IOC_SET_OUTPUT can race rb_alloc_aux() with map_range(), leading to a page-UAF scenario as follows: CPU 0 CPU 1 ===== ===== rb_alloc_aux() map_range() [1]: allocate rb->aux_pages[0] [2]: rb->aux_nr_pages++ [3]: perf_mmap_to_page() returns rb->aux_pages[0] [4]: map it as VM_PFNMAP [5]: rb->aux_pgoff = 1 munmap the page [6]: free rb->aux_pages[0] Pages mapped as VM_PFNMAP have no refcount protection, so CPU 1 holds a mapping to a freed physical frame. Fix this by taking rb->aux_mutex across the page walk in map_range().

In the Linux kernel, the following vulnerability has been resolved: crypto: qat - validate RSA CRT component lengths The generic RSA key parser (rsa_helper.c) bounds each CRT component (p, q, dp, dq, qinv) by the modulus size n_sz, but qat_rsa_setkey_crt() allocates half-size DMA buffers (key_sz / 2) and right-aligns each component with: memcpy(dst + half_key_sz - len, src, len) When a CRT component is larger than half_key_sz the subtraction underflows and memcpy writes past the DMA buffer, causing memory corruption. Add a len > half_key_sz check next to the existing !len check for each of the five CRT components so the driver falls back to the non-CRT path instead of writing out of bounds.

In the Linux kernel, the following vulnerability has been resolved: crypto: loongson - Remove broken and unused loongson-rng The loongson-rng rng_alg has several vulnerabilities, including not providing forward security, and a use-after-free bug due to the use of wait_for_completion_interruptible(). Meanwhile, the rng_alg framework doesn't really have any purpose in the first place other than to access the software algorithms crypto/drbg.c and crypto/jitterentropy.c. Hardware-specific rng_algs have no in-kernel user, and unlike hwrng there's no feed into the actual Linux RNG. As such, there's really no point to this code. There are of course other rng_alg drivers that are similarly unused, but they're similarly in the process of being phased out, e.g. https://lore.kernel.org/r/20260529193648.18172-1-ebiggers@kernel.org and https://lore.kernel.org/r/20260529220430.34135-1-ebiggers@kernel.org Given that, there's no point in fixing forward these vulnerabilities, and it makes much more sense to simply roll back the addition of this driver. If this platform provides TRNG (not PRNG) functionality, it could make sense to add a hwrng driver, but it would be quite different.

In the Linux kernel, the following vulnerability has been resolved: udf: validate sparing table length as an entry count, not a byte count udf_load_sparable_map() accepts a sparing table when sizeof(*st) + le16_to_cpu(st->reallocationTableLen) > sb->s_blocksize is false, i.e. it treats reallocationTableLen as a number of BYTES that must fit in the block. But the table is walked as an array of 8-byte sparingEntry elements: for (i = 0; i < le16_to_cpu(st->reallocationTableLen); i++) { struct sparingEntry *entry = &st->mapEntry[i]; ... entry->origLocation ... } in udf_get_pblock_spar15() and udf_relocate_blocks(). A reallocationTableLen of N therefore passes the check whenever sizeof(*st) + N <= blocksize, yet the consumers index sizeof(*st) + N * sizeof(struct sparingEntry) bytes -- up to ~8x the block. On a crafted UDF image this is an out-of-bounds read in udf_get_pblock_spar15(); udf_relocate_blocks() additionally feeds the same length to udf_update_tag(), whose crc_itu_t() reads far past the block, and its memmove() through st->mapEntry[] is an out-of-bounds write. Validate reallocationTableLen as the entry count it is, with struct_size().

In the Linux kernel, the following vulnerability has been resolved: udf: validate free block extents against the partition length udf_free_blocks() checks the logical block number and count against the partition length, but drops the extent offset from that final bound. A crafted extent can pass the guard while logicalBlockNum + offset + count points past the partition, which later indexes past the space bitmap array. A single ftruncate(2) on a file backed by such an extent reliably panics the kernel. This is a local availability issue. On desktop systems where UDisks/polkit allows the active user to mount removable UDF media without CAP_SYS_ADMIN, an unprivileged local user can supply the crafted filesystem and trigger the panic by truncating a writable file on it. Systems that require root or CAP_SYS_ADMIN to mount the image have a higher prerequisite. No confidentiality or integrity impact is claimed: the reproduced primitive is an out-of-bounds read of a bitmap pointer slot followed by a kernel panic. Use the already computed logicalBlockNum + offset + count value for the partition length check. Also make load_block_bitmap() reject an out-of-range block group before indexing s_block_bitmap[], so corrupted callers cannot walk past the flexible array.

In the Linux kernel, the following vulnerability has been resolved: USB: serial: digi_acceleport: fix write buffer corruption The digi_write_inb_command() is supposed to wait for the write urb to become available or return an error, but instead it updates the transfer buffer and tries to resubmit the urb on timeout. To make things worse, for commands like break control where no timeout is used, the driver would corrupt the urb immediately due to a broken jiffies comparison (on 32-bit machines this takes five minutes of uptime to trigger due to INITIAL_JIFFIES). Fix this by adding the missing return on timeout and waiting indefinitely when no timeout has been specified as intended. This issue was (sort of) flagged by Sashiko when reviewing an unrelated change to the driver.

In the Linux kernel, the following vulnerability has been resolved: bpf: Validate BTF repeated field counts before expansion btf_parse_struct_metas() walks user-supplied BTF during BPF_BTF_LOAD, and btf_repeat_fields() expands repeatable fields from array elements into the fixed BTF_FIELDS_MAX scratch array used by btf_parse_fields(). The remaining-capacity check performs the expanded field count calculation in u32. A malformed BTF can wrap that calculation, causing the check to pass even when the expanded field count exceeds the scratch array capacity. The following memcpy() can then write past the end of the array. Use checked addition and multiplication before copying repeated fields and reject impossible counts.

In the Linux kernel, the following vulnerability has been resolved: hfs/hfsplus: fix u32 overflow in check_and_correct_requested_length check_and_correct_requested_length() compares (off + len) against node_size using u32 arithmetic. When the caller passes a large len value (e.g. from an underflowed subtraction in hfs_brec_remove()), off + len can wrap past 2^32 and produce a small result, causing the bounds check to pass when it should fail. For example, with off=14 and len=0xFFFFFFF2 (underflowed from data_off - keyoffset - size in hfs_brec_remove), off + len wraps to 6, which is less than a typical node_size of 512, so the check passes and the subsequent memmove reads ~4GB past the node buffer. Fix this by widening the addition to u64 before comparing against node_size. This prevents the u32 wrap while keeping the logic straightforward.

In the Linux kernel, the following vulnerability has been resolved: HID: hid-goodix-spi: validate report size to prevent stack buffer overflow goodix_hid_set_raw_report() builds a protocol frame in a 128-byte stack buffer (tmp_buf), writing an 11-12 byte header followed by the caller-supplied report data. The HID core caps report size at HID_MAX_BUFFER_SIZE (16384) by default, while the driver does not set hid_ll_driver.max_buffer_size and performs no bounds checking before copying the payload: memcpy(tmp_buf + tx_len, buf, len); A hidraw SET_REPORT ioctl with a report larger than ~116 bytes overflows the stack buffer. Add a size check after constructing the header, rejecting reports that would exceed the buffer capacity. Discovered by Atuin - Automated Vulnerability Discovery Engine.

In the Linux kernel, the following vulnerability has been resolved: cpufreq: pcc: fix use-after-free and double free in _OSC evaluation pcc_cpufreq_do_osc() calls acpi_evaluate_object() twice for the two-phase _OSC negotiation. Between the two calls it freed output.pointer but left output.length unchanged. Since acpi_evaluate_object() treats a non-zero length with a non-NULL pointer as an existing buffer to write into, the second call wrote into freed memory (use-after-free). The subsequent kfree(output.pointer) at out_free then freed the same pointer a second time (double free). Reset output.pointer to NULL and output.length to ACPI_ALLOCATE_BUFFER after freeing the first result, so ACPICA allocates a fresh buffer for each phase independently.

In the Linux kernel, the following vulnerability has been resolved: proc: protect ptrace_may_access() with exec_update_lock (FD links) proc_pid_get_link() and proc_pid_readlink() currently look up the task from the pid once, then do the ptrace access check on that task, then look up the task from the pid a second time to do the actual access. That's racy in several ways. To fix it, pass the task to the ->proc_get_link() handler, and instead of proc_fd_access_allowed(), introduce a new helper call_proc_get_link() that looks up and locks the task, does the access check, and calls ->proc_get_link().

In the Linux kernel, the following vulnerability has been resolved: writeback: fix race between cgroup_writeback_umount() and inode_switch_wbs() When a container exits, the following BUG_ON() is occasionally triggered: ================================================================== VFS: Busy inodes after unmount of sdb (ext4) ------------[ cut here ]------------ kernel BUG at fs/super.c:695! CPU: 3 PID: 6 Comm: containerd-shim Tainted: G OE K 6.6 #1 pstate: 63400009 (nZCv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--) pc : generic_shutdown_super+0xf0/0x100 lr : generic_shutdown_super+0xf0/0x100 Call trace: generic_shutdown_super+0xf0/0x100 kill_block_super+0x20/0x48 ext4_kill_sb+0x28/0x60 deactivate_locked_super+0x54/0x130 deactivate_super+0x84/0xa0 cleanup_mnt+0xa4/0x140 __cleanup_mnt+0x18/0x28 task_work_run+0x78/0xe0 do_notify_resume+0x204/0x240 ================================================================== The root cause is a race between cgroup_writeback_umount() and inode_switch_wbs()/cleanup_offline_cgwb(). There is a window between inode_prepare_wbs_switch() returning true and the subsequent wb_queue_isw() call. Following is the process that triggers the issue: CPU A (umount) | CPU B (writeback) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ inode_switch_wbs/cleanup_offline_cgwb atomic_inc(&isw_nr_in_flight) inode_prepare_wbs_switch -> passes SB_ACTIVE check __iget(inode) generic_shutdown_super sb->s_flags &= ~SB_ACTIVE cgroup_writeback_umount(sb) smp_mb() atomic_read(&isw_nr_in_flight) rcu_barrier() -> no pending RCU callbacks flush_workqueue(isw_wq) -> nothing queued, returns evict_inodes(sb) -> Inode skipped as isw still holds a ref. sop->put_super(sb) /* destroys percpu counters */ -> VFS: Busy inodes after unmount! wb_queue_isw() queue_work(isw_wq, ...) /* later in work function */ inode_switch_wbs_work_fn process_inode_switch_wbs iput() -> evict percpu_counter_dec() // UAF! Fix this by extending the RCU read-side critical section in inode_switch_wbs() and cleanup_offline_cgwb() to cover from inode_prepare_wbs_switch() through wb_queue_isw(). Since there is no sleep in this window, rcu_read_lock() can be used. Then add a synchronize_rcu() in cgroup_writeback_umount() before the existing rcu_barrier(), so that all in-flight switchers that have passed the SB_ACTIVE check have completed queue_work() before flush_workqueue() is called. The existing rcu_barrier() is intentionally retained so this fix can be backported unchanged to stable kernels (5.10.y, 6.6.y, ...) that still queue switches via queue_rcu_work(). It is a no-op on current mainline (since commit e1b849cfa6b6 ("writeback: Avoid contention on wb->list_lock when switching inodes")) and is removed in a follow-up patch.

In the Linux kernel, the following vulnerability has been resolved: smb/client: fix chown/chgrp with SMB3 POSIX Extensions Ownership (chown) and group (chgrp) modifications were being ignored when mounting with SMB3 POSIX Extensions unless CIFS_MOUNT_CIFS_ACL or CIFS_MOUNT_MODE_FROM_SID were also explicitly set. Fix this by checking for posix_extensions in cifs_setattr_nounix() when updating UID and GID, ensuring that id_mode_to_cifs_acl() is called to map and set the ownership/group information on the server.

In the Linux kernel, the following vulnerability has been resolved: coresight: ultrasoc-smb: Fix OOB write in smb_sync_perf_buffer() When the SMB sink is used as a perf AUX sink, smb_update_buffer() calls smb_sync_perf_buffer() to copy hardware trace data into the perf AUX ring buffer pages. It derives pg_idx = head >> PAGE_SHIFT from @head, which is handle->head, and indexes dst_pages[pg_idx]. The pg_idx %= nr_pages normalization is only applied after the first loop iteration. This leaves the initial page index underived from the buffer size, which can result in an out-of-bounds write past dst_pages[] when head exceeds the AUX buffer size. Normalize head modulo the AUX buffer size before deriving the page index and offset, mirroring tmc_etr_sync_perf_buffer().

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free in ksmbd_tree_connect_put under concurrency Under high concurrency, A tree-connection object (tcon) is freed on a disconnect path while another path still holds a reference and later executes *_put()/write on it.

In the Linux kernel, the following vulnerability has been resolved: mm: shrinker: fix shrinker_info teardown race with expansion expand_shrinker_info() iterates all visible memcgs under shrinker_mutex, including memcgs that have not finished ->css_online() yet. Once pn->shrinker_info has been published, teardown must stay serialized with expand_shrinker_info() until that memcg is either fully online or no longer visible to iteration. Today alloc_shrinker_info() breaks that rule by dropping shrinker_mutex before freeing a partially initialized shrinker_info array, which may cause the following race: CPU0 CPU1 ==== ==== css_create --> list_add_tail_rcu(&css->sibling, &parent_css->children); online_css --> mem_cgroup_css_online --> alloc_shrinker_info --> alloc node0 info rcu_assign_pointer(C->node0->shrinker_info, old0) alloc node1 info -> FAIL -> goto err mutex_unlock(shrinker_mutex) shrinker_alloc() --> shrinker_memcg_alloc --> mutex_lock(shrinker_mutex) expand_shrinker_info --> mem_cgroup_iter see the memcg expand_one_shrinker_info --> old0 = C->node0->shrinker_info memcpy(new->unit, old0->unit, ...); free_shrinker_info --> kvfree(old0); /* double free !! */ kvfree_rcu(old0, rcu); The same problem exists later in mem_cgroup_css_online(). If alloc_shrinker_info() succeeds but a subsequent objcg allocation fails, the free_objcg -> free_shrinker_info() unwind path tears down the already published pn->shrinker_info arrays without shrinker_mutex. The expand_one_shrinker_info() can race with that teardown in the same way, leading to use-after-free or double-free of the old shrinker_info. Fix this by serializing shrinker_info teardown with shrinker_mutex, and by keeping alloc_shrinker_info() error cleanup inside the locked section.