ownCloud Guests before 0.12.5 allows unauthenticated user enumeration via the /apps/guests/register/{email}/{token} endpoint. Because of insufficient validation of the supplied token in showPasswordForm, the server responds differently when an e-mail address corresponds to a valid pending guest user rather than a non-existent user.

In BIG-IP 15.0.0, 14.1.0-14.1.0.6, 14.0.0-14.0.0.5, 13.0.0-13.1.1.5, 12.1.0-12.1.4.1, 11.5.1-11.6.4, BIG-IQ 7.0.0, 6.0.0-6.1.0,5.2.0-5.4.0, iWorkflow 2.3.0, and Enterprise Manager 3.1.1, the Configuration utility login page may not follow best security practices when handling a malicious request.

Timing difference in password reset in Ergon Informatik AG's Airlock IAM 7.7.9, 8.0.8, 8.1.7, 8.2.4 and 8.3.1 allows unauthenticated attackers to enumerate usernames.

Improper handling of authentication requests lead to a user enumeration vector in the passkey authentication method.

IBM Control Center 6.2.1 and 6.3.1 could allow a remote attacker to enumerate usernames due to an observable discrepancy between login attempts.

In Bromite through 78.0.3904.130, there are adblock rules in the release APK; therefore, probing which resources are blocked and which aren't can identify the application version and defeat the User-Agent protection mechanism.

Kanboard is project management software that focuses on the Kanban methodology. Prior to version 1.2.46, Kanboard is vulnerable to username enumeration and IP spoofing-based brute-force protection bypass. By analyzing login behavior and abusing trusted HTTP headers, an attacker can determine valid usernames and circumvent rate-limiting or blocking mechanisms. Any organization running a publicly accessible Kanboard instance is affected, especially if relying on IP-based protections like Fail2Ban or CAPTCHA for login rate-limiting. Attackers with access to the login page can exploit this flaw to enumerate valid usernames and bypass IP-based blocking mechanisms, putting all user accounts at higher risk of brute-force or credential stuffing attacks. Version 1.2.46 contains a patch for the issue.

Avaya IX Workforce Engagement v15.2.7.1195 - User Enumeration - Observable Response Discrepancy

_account_forgot_password.ajax.php in MFScripts YetiShare 3.5.2 through 4.5.3 takes a different amount of time to return depending on whether an email address is configured for the account name provided. This can be used by an attacker to enumerate accounts by guessing email addresses.

User enumeration vulnerability in Password Recovery plugin 1.2 version for Roundcube, which could allow a remote attacker to create a test script against the password recovery function to enumerate all users in the database.

An issue was discovered in Symfony 4.2.0 to 4.2.11 and 4.3.0 to 4.3.7. The ability to enumerate users was possible due to different handling depending on whether the user existed when making unauthorized attempts to use the switch users functionality. This is related to symfony/security.

Enumeration of ERC from object entry in Liferay Portal 7.4.0 through 7.4.3.128, and Liferay DXP 2024.Q3.0 through 2024.Q3.1, 2024.Q2.0 through 2024.Q2.13, 2024.Q1.1 through 2024.Q1.12, 2023.Q4.0 and 7.4 GA through update 92 allow attackers to determine existent ERC in the application by exploit the time response.

The Stop User Enumeration WordPress plugin before version 1.7.3 blocks REST API /wp-json/wp/v2/users/ requests for non-authorized users. However, this can be bypassed by URL-encoding the API path.

User enumeration vulnerability in Liferay Portal 7.4.0 through 7.4.3.132, and Liferay DXP 2024.Q4.0 through 2024.Q4.7, 2024.Q3.0 through 2024.Q3.13, 2024.Q2.0 through 2024.Q2.13, 2024.Q1.1 through 2024.Q1.14, 2023.Q4.0 through 2023.Q4.10, 2023.Q3.1 through 2023.Q3.10 and 7.4 GA through update 92 allows remote attackers to determine if an account exist in the application via the create account page.

IBM Cognos Controller 10.4.1, 10.4.2, and 11.0.0 could allow a remote user to enumerate usernames due to differentiating error messages on existing usernames. IBM X-Force ID: 199181.

A username enumeration issue was discovered in Medicine Tracker System 1.0. The login functionality allows a malicious user to guess a valid username due to a different response time from invalid usernames. When one enters a valid username, the response time increases depending on the length of the supplied password.

Symfony is a PHP framework for web and console applications and a set of reusable PHP components. The ability to enumerate users was possible without relevant permissions due to different handling depending on whether the user existed or not when attempting to use the switch users functionality. We now ensure that 403s are returned whether the user exists or not if a user cannot switch to a user or if the user does not exist. The patch for this issue is available for branch 3.4.

webcalendar before 1.2.7 shows the reason for a failed login (e.g., "no such user").

The Reset Password feature in Pagekit 1.0.17 gives a different response depending on whether the e-mail address of a valid user account is entered, which might make it easier for attackers to enumerate accounts.

An issue was discovered in ConnectWise Control (formerly known as ScreenConnect) 19.3.25270.7185. There is a user enumeration vulnerability, allowing an unauthenticated attacker to determine with certainty if an account exists for a given username.

When supplied with a random MAC address, Snap One OvrC cloud servers will return information about the device. The MAC address of devices can be enumerated in an attack and the OvrC cloud will disclose their information.

A vulnerability in Cisco SD-WAN vManage Software could allow an unauthenticated, remote attacker to enumerate user accounts. This vulnerability is due to the improper handling of HTTP headers. An attacker could exploit this vulnerability by sending authenticated requests to an affected system. A successful exploit could allow the attacker to compare the HTTP responses that are returned by the affected system to determine which accounts are valid user accounts.

An exposure of sensitive information vulnerability exists in TCExam <= 14.8.1. If a password reset request was made for an email address that was not registered with a user then we would be presented with an ‘unknown email’ error. If an email is given that is registered with a user then this error will not appear. A malicious actor could abuse this to enumerate the email addresses of

ManageEngine ADSelfService Plus below build 6116 contains an observable response discrepancy in the UMCP operation of the ChangePasswordAPI. This allows an unauthenticated remote attacker to determine whether a Windows domain user exists.

SPIP before 3.1.11 and 3.2 before 3.2.5 provides different error messages from the password-reminder page depending on whether an e-mail address exists, which might help attackers to enumerate subscribers.

For failed login attempts, the application returns different error messages depending on whether the login failed due to an incorrect password or a non-existing username. This allows an attacker to guess usernames until they find an existing one.

On Coldcard MK1 and MK2 devices, a side channel for the row-based OLED display was found. The power consumption of each row-based display cycle depends on the number of illuminated pixels, allowing a partial recovery of display contents. For example, a hardware implant in the USB cable might be able to leverage this behavior to recover confidential secrets such as the PIN and BIP39 mnemonic. In other words, the side channel is relevant only if the attacker has enough control over the device's USB connection to make power-consumption measurements at a time when secret data is displayed. The side channel is not relevant in other circumstances, such as a stolen device that is not currently displaying secret data. On Coldcard MK1 and MK2 devices, a side channel for the row-based OLED display was found. The power consumption of each row-based display cycle depends on the number of illuminated pixels, allowing a partial recovery of display contents. For example, a hardware implant in the USB cable might be able to leverage this behavior to recover confidential secrets such as the PIN and BIP39 mnemonic. In other words, the side channel is relevant only if the attacker has enough control over the device's USB connection to make power-consumption measurements at a time when secret data is displayed. The side channel is not relevant in other circumstances, such as a stolen device that is not currently displaying secret data. NOTE: At Coinkite, we’ve already mitigated it, even though we feel strongly that it is not a legitimate issue. In our opinion, it is both unproven (might not even work) and also completely impractical—even if it could be made to work perfectly

User enumeration vulnerability in ORDAT FOSS-Online before v2.24.01 allows attackers to determine if an account exists in the application by comparing the server responses of the forgot password functionality.

In the Voatz application 2020-01-01 for Android, the amount of data transmitted during a single voter's vote depends on the different lengths of the metadata across the available voting choices, which makes it easier for remote attackers to discover this voter's choice by sniffing the network. For example, a small amount of sniffed data may indicate that a vote was cast for the candidate with the least metadata. An active man-in-the-middle attacker can leverage this behavior to disrupt voters' abilities to vote for a candidate opposed by the attacker.

A vulnerability has been identified in Mendix Forgot Password (Mendix 7 compatible) (All versions < V3.7.1), Mendix Forgot Password (Mendix 8 compatible) (All versions < V4.1.1), Mendix Forgot Password (Mendix 9 compatible) (All versions < V5.1.1). The affected versions of the module contain an observable response discrepancy issue that could allow an attacker to retrieve sensitive information.

Dropbear 2011.54 through 2018.76 has an inconsistent failure delay that may lead to revealing valid usernames, a different issue than CVE-2018-15599.

Umbraco is a free and open source .NET content management system. Starting in version 14.0.0 and prior to versions 14.3.2 and 15.1.2, it's possible to determine whether an account exists based on an analysis of response codes and timing of Umbraco management API responses. Versions 14.3.2 and 15.1.2 contain a patch. No known workarounds are available.

A vulnerability in the External Interface of OTRS allows conclusions to be drawn about the existence of user accounts through different HTTP response codes and messages. This enables an attacker to systematically identify valid email addresses. This issue affects: * OTRS 7.0.X * OTRS 8.0.X * OTRS 2023.X * OTRS 2024.X * OTRS 2025.X

In CentOS-WebPanel.com (aka CWP) CentOS Web Panel 0.9.8.846, the Login process allows attackers to check whether a username is valid by reading the HTTP response.

IBM Aspera Orchestrator 4.0.1 could allow a remote attacker to enumerate usernames due to observable response discrepancies. IBM X-Force ID: 248545.

In CentOS-WebPanel.com (aka CWP) CentOS Web Panel 0.9.8.848, the Login process allows attackers to check whether a username is valid by comparing response times.

A username enumeration vulnerability exists in multiple WSO2 products when Multi-Attribute Login is enabled. In this configuration, the system returns a distinct "User does not exist" error message to the login form, regardless of the validate_username setting. This behavior allows malicious actors to determine which usernames exist in the system based on observable discrepancies in the application's responses. Exploitation of this vulnerability could aid in brute-force attacks, targeted phishing campaigns, or other social engineering techniques by confirming the validity of user identifiers within the system.

Observable Response Discrepancy in SICK FTMg AIR FLOW SENSOR with Partnumbers 1100214, 1100215, 1100216, 1120114, 1120116, 1122524, 1122526 allows a remote attacker to gain information about valid usernames by analyzing challenge responses from the server via the REST interface.

By checking the result of calls to `window.open` with specifically set protocol handlers, an attacker could determine if the application which implements that protocol handler is installed. This vulnerability affects Firefox < 131, Firefox ESR < 128.3, Thunderbird < 128.3, and Thunderbird < 131.

A vulnerability in NetCat CMS allows an attacker to send a specially crafted http request that can be used to check whether a user exists in the system, which could be a basis for further attacks. This issue affects NetCat CMS v. 6.4.0.24126.2 and possibly others. Apply patch from vendor https://netcat.ru/ https://netcat.ru/] . Versions 6.4.0.24248 and on have the patch.

A vulnerability was found in nasirkhan Laravel Starter up to 11.8.0. It has been rated as problematic. Affected by this issue is some unknown functionality of the file /forgot-password of the component Password Reset Handler. The manipulation of the argument Email leads to observable response discrepancy. The attack may be launched remotely. The complexity of an attack is rather high. The exploitation is known to be difficult. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-268784. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Observable Timing Discrepancy in GitHub repository answerdev/answer prior to 1.0.6.

GNU GRUB (aka GRUB2) through 2.12 does not use a constant-time algorithm for grub_crypto_memcmp and thus allows side-channel attacks.

A website was able to detect when a user took a screenshot of a page using the built-in Screenshot functionality in Firefox. This vulnerability affects Firefox < 127.

Observable Response Discrepancy in GitHub repository answerdev/answer prior to 1.0.6.

REDCap 14.3.13 allows an attacker to enumerate usernames due to an observable discrepancy between login attempts.

H3C SSL VPN contains a user enumeration vulnerability that allows attackers to identify valid usernames through the 'txtUsrName' POST parameter. Attackers can submit different usernames to the login_submit.cgi endpoint and analyze response messages to distinguish between existing and non-existing accounts.

An issue was discovered in Kurmi Provisioning Suite before 7.9.0.35, 7.10.x through 7.10.0.18, and 7.11.x through 7.11.0.15. An Observable Response Discrepancy vulnerability in the sendPasswordReinitLink action of the unlogged.do page allows remote attackers to test whether a username is valid or not. This allows confirmation of valid usernames.

Dependency-Track is a Component Analysis platform that allows organizations to identify and reduce risk in the software supply chain. Performing a login request against the /api/v1/user/login endpoint with a username that exist in the system takes significantly longer than performing the same action with a username that is not known by the system. The observable difference in request duration can be leveraged by actors to enumerate valid names of managed users. LDAP and OpenID Connect users are not affected. The issue has been fixed in Dependency-Track 4.12.2.

Combodo iTop is a simple, web based IT Service Management tool. Unauthenticated user can perform users enumeration, which can make it easier to bruteforce a valid account. As a fix the sentence displayed after resetting password no longer shows if the user exists or not. This fix is included in versions 2.7.11, 3.0.5, 3.1.2, and 3.2.0. Users are advised to upgrade. Users unable to upgrade may overload the dictionary entry `"UI:ResetPwd-Error-WrongLogin"` through an extension and replace it with a generic message.