A CRL critical extension bypass exists in ParseCRL_Extensions where critical extensions are not properly enforced, allowing a crafted CRL with an unhandled critical extension to be accepted. This only affects builds with CRL support enabled and where a crafted CRL had a trusted signature when parsed.

Chain intermediate CA:TRUE without keyCertSign accepted as a signing CA. Intermediate CA certificates are required to have the keyCertSign key usage when a Key Usage extension is present, but chain-supplied temporary CAs (WOLFSSL_TEMP_CA) added while building a certificate path were previously exempted from this check, so an intermediate asserting CA:TRUE but lacking keyCertSign was accepted as a signing CA. The check now applies to chain-supplied temporary CAs as well; only operator-loaded root certificates (WOLFSSL_USER_CA) and self-signed roots remain exempt. Per RFC 5280 an absent Key Usage extension implies all usages, so the requirement is enforced only when the extension is actually present (extKeyUsageSet). Affects the OpenSSL-compatibility certificate-path-building path (X509_verify_cert / X509_STORE, OPENSSL_EXTRA/OPENSSL_ALL), where untrusted chain intermediates are added as temporary CAs; native (non-OpenSSL-compat) certificate verification does not create temporary CAs and is unaffected. Within those builds, the check applies unless ALLOW_INVALID_CERTSIGN is defined.

OCSP CertID serial-number length-confusion in wolfSSL_OCSP_resp_find_status allows a same-issuer SingleResponse whose serial is a prefix of the target serial to be reported as the revocation status of a different certificate. The lookup compared serial-number bytes without first requiring the two serial numbers to be of equal length, so a SingleResponse for one certificate (same issuer) whose serial is a prefix of the target's serial would match, returning the wrong certificate's status. The fix requires the serial lengths to be equal before comparing the serial bytes.

Certificates with wildcard DNS SANs (e.g. *.example.com) bypassed CA name-constraint checks. A certificate with a wildcard DNS SAN that should be rejected by the issuing CA's permitted/excluded DNS name constraints could be accepted.

An issue was discovered in the DTLS handshake implementation in wolfSSL before 4.5.0. Clear DTLS application_data messages in epoch 0 do not produce an out-of-order error. Instead, these messages are returned to the application.

In wolfSSL 4.1.0 through 4.2.0c, there are missing sanity checks of memory accesses in parsing ASN.1 certificate data while handshaking. Specifically, there is a one-byte heap-based buffer overflow inside the DecodedCert structure in GetName in wolfcrypt/src/asn.c because the domain name location index is mishandled. Because a pointer is overwritten, there is an invalid free.

wolfSSL wolfMQTT 1.9 has a heap-based buffer overflow in MqttClient_DecodePacket (called from MqttClient_HandlePacket and MqttClient_WaitType).

wolfSSL wolfMQTT 1.9 has a heap-based buffer overflow in MqttClient_DecodePacket (called from MqttClient_WaitType and MqttClient_Unsubscribe).

wolfSSL wolfMQTT 1.9 has a heap-based buffer overflow (8 bytes) in MqttDecode_Publish (called from MqttClient_DecodePacket and MqttClient_HandlePacket).

wolfSSL wolfMQTT 1.9 has a heap-based buffer overflow (4 bytes) in MqttDecode_Publish (called from MqttClient_DecodePacket and MqttClient_HandlePacket).

wolfSSL wolfMQTT 1.9 has a heap-based buffer overflow in MqttClient_DecodePacket (called from MqttClient_WaitType and MqttClient_Subscribe).

A heap buffer overflow could occur in the DTLS 1.3 ACK serialization path before the connecting peer is authenticated. The buffer overflow was due to an integer truncation when computing the length of the ACK record-number list, causing an undersized buffer to be allocated and then overrun. This affects builds using DTLS 1.3 and wolfSSL version 5.9.0 and earlier. A fix was added to the 5.9.1 release.

Out-of-bounds write in the Renesas TSIP TLS 1.3 transcript buffer. In tsip_StoreMessage() the capacity check guarding the fixed message bag (MSGBAG_SIZE) sets an error code but fails to return, so execution falls through to an XMEMCPY that writes past the end of the buffer once the accumulated TLS 1.3 handshake transcript exceeds MSGBAG_SIZE (8 KB), corrupting adjacent heap state and potentially causing a remote denial of service crash. The bag is sized to hold a normal handshake, so this is reached only by an unusually large but valid certificate chain, or by a malicious or man-in-the-middle server sending an oversized handshake message to a client that does not strictly verify the chain. This only affects builds using the Renesas TSIP TLS port (WOLFSSL_RENESAS_TSIP_TLS) as a TLS 1.3 client on Renesas MCUs with TSIP hardware enabled, and is rated High within those builds. All other configurations are unaffected.

In TLSX_EchChangeSNI, the ctx->extensions branch set extensions unconditionally even when TLSX_Find returned NULL. This caused TLSX_UseSNI to attach the attacker-controlled publicName to the shared WOLFSSL_CTX when no inner SNI was configured. TLSX_EchRestoreSNI then failed to clean it up because its removal was gated on serverNameX != NULL. The inner ClientHello was sized before the pollution but written after it, causing TLSX_SNI_Write to memcpy 255 bytes past the allocation boundary.

Two potential heap out-of-bounds write locations existed in DecodeObjectId() in wolfcrypt/src/asn.c. First, a bounds check only validates one available slot before writing two OID arc values (out[0] and out[1]), enabling a 2-byte out-of-bounds write when outSz equals 1. Second, multiple callers pass sizeof(decOid) (64 bytes on 64-bit platforms) instead of the element count MAX_OID_SZ (32), causing the function to accept crafted OIDs with 33 or more arcs that write past the end of the allocated buffer.

A heap-buffer-overflow vulnerability exists in wolfSSL's wolfSSL_d2i_SSL_SESSION() function. When deserializing session data with SESSION_CERTS enabled, certificate and session id lengths are read from an untrusted input without bounds validation, allowing an attacker to overflow fixed-size buffers and corrupt heap memory. A maliciously crafted session would need to be loaded from an external source to trigger this vulnerability. Internal sessions were not vulnerable.

A stack buffer overflow vulnerability exists in wolfSSL's PKCS7 SignedData encoding functionality. In wc_PKCS7_BuildSignedAttributes(), when adding custom signed attributes, the code passes an incorrect capacity value (esd->signedAttribsCount) to EncodeAttributes() instead of the remaining available space in the fixed-size signedAttribs[7] array. When an application sets pkcs7->signedAttribsSz to a value greater than MAX_SIGNED_ATTRIBS_SZ (default 7) minus the number of default attributes already added, EncodeAttributes() writes beyond the array bounds, causing stack memory corruption. In WOLFSSL_SMALL_STACK builds, this becomes heap corruption. Exploitation requires an application that allows untrusted input to control the signedAttribs array size when calling wc_PKCS7_EncodeSignedData() or related signing functions.

Stack Buffer Overflow in wc_HpkeLabeledExtract via Oversized ECH Config. A vulnerability existed in wolfSSL 5.8.4 ECH (Encrypted Client Hello) support, where a maliciously crafted ECH config could cause a stack buffer overflow on the client side, leading to potential remote execution and client program crash. This could be exploited by a malicious TLS server supporting ECH. Note that ECH is off by default, and is only enabled with enable-ech.

Two buffer overflow vulnerabilities existed in the wolfSSL CRL parser when parsing CRL numbers: a heap-based buffer overflow could occur when improperly storing the CRL number as a hexadecimal string, and a stack-based overflow for sufficiently sized CRL numbers. With appropriately crafted CRLs, either of these out of bound writes could be triggered. Note this only affects builds that specifically enable CRL support, and the user would need to load a CRL from an untrusted source.

Out-of-bounds write in SetSuitesHashSigAlgo when processing an oversized signature algorithms list, allowing a write past the bounds of the destination buffer.

examples/benchmark/tls_bench.c in a benchmark tool in wolfSSL through 3.15.7 has a heap-based buffer overflow.

wolfSSL 4.0.0 has a Buffer Overflow in DoPreSharedKeys in tls13.c when a current identity size is greater than a client identity size. An attacker sends a crafted hello client packet over the network to a TLSv1.3 wolfSSL server. The length fields of the packet: record length, client hello length, total extensions length, PSK extension length, total identity length, and identity length contain their maximum value which is 2^16. The identity data field of the PSK extension of the packet contains the attack data, to be stored in the undefined memory (RAM) of the server. The size of the data is about 65 kB. Possibly the attacker can perform a remote code execution attack.

Multiple stack-based buffer overflows in the CertDecoder::GetName function in src/asn.cpp in TaoCrypt in yaSSL before 1.9.9, as used in mysqld in MySQL 5.0.x before 5.0.90, MySQL 5.1.x before 5.1.43, MySQL 5.5.x through 5.5.0-m2, and other products, allow remote attackers to execute arbitrary code or cause a denial of service (memory corruption and daemon crash) by establishing an SSL connection and sending an X.509 client certificate with a crafted name field, as demonstrated by mysql_overflow1.py and the vd_mysql5 module in VulnDisco Pack Professional 8.11. NOTE: this was originally reported for MySQL 5.0.51a.

In wolfSSL before 5.5.1, malicious clients can cause a buffer overflow during a TLS 1.3 handshake. This occurs when an attacker supposedly resumes a previous TLS session. During the resumption Client Hello a Hello Retry Request must be triggered. Both Client Hellos are required to contain a list of duplicate cipher suites to trigger the buffer overflow. In total, two Client Hellos have to be sent: one in the resumed session, and a second one as a response to a Hello Retry Request message.

wolfSSL wolfMQTT 1.9 has a heap-based buffer overflow in MqttDecode_Disconnect (called from MqttClient_DecodePacket and MqttClient_WaitType).

wolfSSL wolfMQTT 1.9 has a heap-based buffer overflow in MqttClient_DecodePacket (called from MqttClient_WaitType and MqttClient_Connect).

RsaPad_PSS in wolfcrypt/src/rsa.c in wolfSSL before 4.6.0 has an out-of-bounds write for certain relationships between key size and digest size.

An issue was discovered in Samsung Mobile Processor Exynos 9820, 9825, 980, 990, 850, 1080, 2100, and 1280. Lack of a length check leads to a stack out-of-bounds write at loadOutputBuffers.

A buffer overflow exists in the Brotli library versions prior to 1.0.8 where an attacker controlling the input length of a "one-shot" decompression request to a script can trigger a crash, which happens when copying over chunks of data larger than 2 GiB. It is recommended to update your Brotli library to 1.0.8 or later. If one cannot update, we recommend to use the "streaming" API as opposed to the "one-shot" API, and impose chunk size limits.

The Sub-IoT implementation of the DASH 7 Alliance protocol has a vulnerability that can lead to an out-of-bounds write prior to implementation version 0.5.0. If the protocol has been compiled using default settings, this will only grant the attacker access to allocated but unused memory. However, if it was configured using non-default settings, there is the possibility that exploiting this vulnerability could lead to system crashes and remote code execution.

A buffer overflow in DCMTK git master v3.6.9+ DEV allows attackers to cause a Denial of Service (DoS) via a crafted DCM file.

Shenzhen Libituo Technology Co., Ltd LBT-T300-mini v1.2.9 was discovered to contain a buffer overflow via the pin_code_3g parameter at /apply.cgi.

In subsys/net/ip/tcp.c , function tcp_flags , when the incoming parameter flags is ECN or CWR , the buf will out-of-bounds write a byte zero.