In the Linux kernel, the following vulnerability has been resolved: clk: mmp2: call pm_genpd_init() only after genpd.name is set Setting the genpd's struct device's name with dev_set_name() is happening within pm_genpd_init(). If it remains NULL, things can blow up later, such as when crafting the devfs hierarchy for the power domain: Unable to handle kernel NULL pointer dereference at virtual address 00000000 when read ... Call trace: strlen from start_creating+0x90/0x138 start_creating from debugfs_create_dir+0x20/0x178 debugfs_create_dir from genpd_debug_add.part.0+0x4c/0x144 genpd_debug_add.part.0 from genpd_debug_init+0x74/0x90 genpd_debug_init from do_one_initcall+0x5c/0x244 do_one_initcall from kernel_init_freeable+0x19c/0x1f4 kernel_init_freeable from kernel_init+0x1c/0x12c kernel_init from ret_from_fork+0x14/0x28 Bisecting tracks this crash back to commit 899f44531fe6 ("pmdomain: core: Add GENPD_FLAG_DEV_NAME_FW flag"), which exchanges use of genpd->name with dev_name(&genpd->dev) in genpd_debug_add.part().

A NULL pointer dereference flaw was found in the Linux kernel’s KVM module, which can lead to a denial of service in the x86_emulate_insn in arch/x86/kvm/emulate.c. This flaw occurs while executing an illegal instruction in guest in the Intel CPU.

In the Linux kernel, the following vulnerability has been resolved: ASoC: imx-card: Add NULL check in imx_card_probe() devm_kasprintf() returns NULL when memory allocation fails. Currently, imx_card_probe() does not check for this case, which results in a NULL pointer dereference. Add NULL check after devm_kasprintf() to prevent this issue.

In the Linux kernel, the following vulnerability has been resolved: net: Fix null-ptr-deref by sock_lock_init_class_and_name() and rmmod. When I ran the repro [0] and waited a few seconds, I observed two LOCKDEP splats: a warning immediately followed by a null-ptr-deref. [1] Reproduction Steps: 1) Mount CIFS 2) Add an iptables rule to drop incoming FIN packets for CIFS 3) Unmount CIFS 4) Unload the CIFS module 5) Remove the iptables rule At step 3), the CIFS module calls sock_release() for the underlying TCP socket, and it returns quickly. However, the socket remains in FIN_WAIT_1 because incoming FIN packets are dropped. At this point, the module's refcnt is 0 while the socket is still alive, so the following rmmod command succeeds. # ss -tan State Recv-Q Send-Q Local Address:Port Peer Address:Port FIN-WAIT-1 0 477 10.0.2.15:51062 10.0.0.137:445 # lsmod | grep cifs cifs 1159168 0 This highlights a discrepancy between the lifetime of the CIFS module and the underlying TCP socket. Even after CIFS calls sock_release() and it returns, the TCP socket does not die immediately in order to close the connection gracefully. While this is generally fine, it causes an issue with LOCKDEP because CIFS assigns a different lock class to the TCP socket's sk->sk_lock using sock_lock_init_class_and_name(). Once an incoming packet is processed for the socket or a timer fires, sk->sk_lock is acquired. Then, LOCKDEP checks the lock context in check_wait_context(), where hlock_class() is called to retrieve the lock class. However, since the module has already been unloaded, hlock_class() logs a warning and returns NULL, triggering the null-ptr-deref. If LOCKDEP is enabled, we must ensure that a module calling sock_lock_init_class_and_name() (CIFS, NFS, etc) cannot be unloaded while such a socket is still alive to prevent this issue. Let's hold the module reference in sock_lock_init_class_and_name() and release it when the socket is freed in sk_prot_free(). Note that sock_lock_init() clears sk->sk_owner for svc_create_socket() that calls sock_lock_init_class_and_name() for a listening socket, which clones a socket by sk_clone_lock() without GFP_ZERO. [0]: CIFS_SERVER="10.0.0.137" CIFS_PATH="//${CIFS_SERVER}/Users/Administrator/Desktop/CIFS_TEST" DEV="enp0s3" CRED="/root/WindowsCredential.txt" MNT=$(mktemp -d /tmp/XXXXXX) mount -t cifs ${CIFS_PATH} ${MNT} -o vers=3.0,credentials=${CRED},cache=none,echo_interval=1 iptables -A INPUT -s ${CIFS_SERVER} -j DROP for i in $(seq 10); do umount ${MNT} rmmod cifs sleep 1 done rm -r ${MNT} iptables -D INPUT -s ${CIFS_SERVER} -j DROP [1]: DEBUG_LOCKS_WARN_ON(1) WARNING: CPU: 10 PID: 0 at kernel/locking/lockdep.c:234 hlock_class (kernel/locking/lockdep.c:234 kernel/locking/lockdep.c:223) Modules linked in: cifs_arc4 nls_ucs2_utils cifs_md4 [last unloaded: cifs] CPU: 10 UID: 0 PID: 0 Comm: swapper/10 Not tainted 6.14.0 #36 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:hlock_class (kernel/locking/lockdep.c:234 kernel/locking/lockdep.c:223) ... Call Trace: <IRQ> __lock_acquire (kernel/locking/lockdep.c:4853 kernel/locking/lockdep.c:5178) lock_acquire (kernel/locking/lockdep.c:469 kernel/locking/lockdep.c:5853 kernel/locking/lockdep.c:5816) _raw_spin_lock_nested (kernel/locking/spinlock.c:379) tcp_v4_rcv (./include/linux/skbuff.h:1678 ./include/net/tcp.h:2547 net/ipv4/tcp_ipv4.c:2350) ... BUG: kernel NULL pointer dereference, address: 00000000000000c4 PF: supervisor read access in kernel mode PF: error_code(0x0000) - not-present page PGD 0 Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 10 UID: 0 PID: 0 Comm: swapper/10 Tainted: G W 6.14.0 #36 Tainted: [W]=WARN Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:__lock_acquire (kernel/ ---truncated---

In the Linux kernel, the following vulnerability has been resolved: phy: ti: phy-omap-usb2: Fix NULL pointer dereference for SRP If the external phy working together with phy-omap-usb2 does not implement send_srp(), we may still attempt to call it. This can happen on an idle Ethernet gadget triggering a wakeup for example: configfs-gadget.g1 gadget.0: ECM Suspend configfs-gadget.g1 gadget.0: Port suspended. Triggering wakeup ... Unable to handle kernel NULL pointer dereference at virtual address 00000000 when execute ... PC is at 0x0 LR is at musb_gadget_wakeup+0x1d4/0x254 [musb_hdrc] ... musb_gadget_wakeup [musb_hdrc] from usb_gadget_wakeup+0x1c/0x3c [udc_core] usb_gadget_wakeup [udc_core] from eth_start_xmit+0x3b0/0x3d4 [u_ether] eth_start_xmit [u_ether] from dev_hard_start_xmit+0x94/0x24c dev_hard_start_xmit from sch_direct_xmit+0x104/0x2e4 sch_direct_xmit from __dev_queue_xmit+0x334/0xd88 __dev_queue_xmit from arp_solicit+0xf0/0x268 arp_solicit from neigh_probe+0x54/0x7c neigh_probe from __neigh_event_send+0x22c/0x47c __neigh_event_send from neigh_resolve_output+0x14c/0x1c0 neigh_resolve_output from ip_finish_output2+0x1c8/0x628 ip_finish_output2 from ip_send_skb+0x40/0xd8 ip_send_skb from udp_send_skb+0x124/0x340 udp_send_skb from udp_sendmsg+0x780/0x984 udp_sendmsg from __sys_sendto+0xd8/0x158 __sys_sendto from ret_fast_syscall+0x0/0x58 Let's fix the issue by checking for send_srp() and set_vbus() before calling them. For USB peripheral only cases these both could be NULL.

Null pointer reference in some Intel(R) Graphics Drivers for Windows* before version 26.20.100.7212 and before version Linux kernel version 5.5 may allow a privileged user to potentially enable a denial of service via local access.

In the Linux kernel, the following vulnerability has been resolved: sctp: add mutual exclusion in proc_sctp_do_udp_port() We must serialize calls to sctp_udp_sock_stop() and sctp_udp_sock_start() or risk a crash as syzbot reported: Oops: general protection fault, probably for non-canonical address 0xdffffc000000000d: 0000 [#1] SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000068-0x000000000000006f] CPU: 1 UID: 0 PID: 6551 Comm: syz.1.44 Not tainted 6.14.0-syzkaller-g7f2ff7b62617 #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2025 RIP: 0010:kernel_sock_shutdown+0x47/0x70 net/socket.c:3653 Call Trace: <TASK> udp_tunnel_sock_release+0x68/0x80 net/ipv4/udp_tunnel_core.c:181 sctp_udp_sock_stop+0x71/0x160 net/sctp/protocol.c:930 proc_sctp_do_udp_port+0x264/0x450 net/sctp/sysctl.c:553 proc_sys_call_handler+0x3d0/0x5b0 fs/proc/proc_sysctl.c:601 iter_file_splice_write+0x91c/0x1150 fs/splice.c:738 do_splice_from fs/splice.c:935 [inline] direct_splice_actor+0x18f/0x6c0 fs/splice.c:1158 splice_direct_to_actor+0x342/0xa30 fs/splice.c:1102 do_splice_direct_actor fs/splice.c:1201 [inline] do_splice_direct+0x174/0x240 fs/splice.c:1227 do_sendfile+0xafd/0xe50 fs/read_write.c:1368 __do_sys_sendfile64 fs/read_write.c:1429 [inline] __se_sys_sendfile64 fs/read_write.c:1415 [inline] __x64_sys_sendfile64+0x1d8/0x220 fs/read_write.c:1415 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]

In the Linux kernel, the following vulnerability has been resolved: nvkm/gsp: correctly advance the read pointer of GSP message queue A GSP event message consists three parts: message header, RPC header, message body. GSP calculates the number of pages to write from the total size of a GSP message. This behavior can be observed from the movement of the write pointer. However, nvkm takes only the size of RPC header and message body as the message size when advancing the read pointer. When handling a two-page GSP message in the non rollback case, It wrongly takes the message body of the previous message as the message header of the next message. As the "message length" tends to be zero, in the calculation of size needs to be copied (0 - size of (message header)), the size needs to be copied will be "0xffffffxx". It also triggers a kernel panic due to a NULL pointer error. [ 547.614102] msg: 00000f90: ff ff ff ff ff ff ff ff 40 d7 18 fb 8b 00 00 00 ........@....... [ 547.622533] msg: 00000fa0: 00 00 00 00 ff ff ff ff ff ff ff ff 00 00 00 00 ................ [ 547.630965] msg: 00000fb0: ff ff ff ff ff ff ff ff 00 00 00 00 ff ff ff ff ................ [ 547.639397] msg: 00000fc0: ff ff ff ff 00 00 00 00 ff ff ff ff ff ff ff ff ................ [ 547.647832] nvkm 0000:c1:00.0: gsp: peek msg rpc fn:0 len:0x0/0xffffffffffffffe0 [ 547.655225] nvkm 0000:c1:00.0: gsp: get msg rpc fn:0 len:0x0/0xffffffffffffffe0 [ 547.662532] BUG: kernel NULL pointer dereference, address: 0000000000000020 [ 547.669485] #PF: supervisor read access in kernel mode [ 547.674624] #PF: error_code(0x0000) - not-present page [ 547.679755] PGD 0 P4D 0 [ 547.682294] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 547.686643] CPU: 22 PID: 322 Comm: kworker/22:1 Tainted: G E 6.9.0-rc6+ #1 [ 547.694893] Hardware name: ASRockRack 1U1G-MILAN/N/ROMED8-NL, BIOS L3.12E 09/06/2022 [ 547.702626] Workqueue: events r535_gsp_msgq_work [nvkm] [ 547.707921] RIP: 0010:r535_gsp_msg_recv+0x87/0x230 [nvkm] [ 547.713375] Code: 00 8b 70 08 48 89 e1 31 d2 4c 89 f7 e8 12 f5 ff ff 48 89 c5 48 85 c0 0f 84 cf 00 00 00 48 81 fd 00 f0 ff ff 0f 87 c4 00 00 00 <8b> 55 10 41 8b 46 30 85 d2 0f 85 f6 00 00 00 83 f8 04 76 10 ba 05 [ 547.732119] RSP: 0018:ffffabe440f87e10 EFLAGS: 00010203 [ 547.737335] RAX: 0000000000000010 RBX: 0000000000000008 RCX: 000000000000003f [ 547.744461] RDX: 0000000000000000 RSI: ffffabe4480a8030 RDI: 0000000000000010 [ 547.751585] RBP: 0000000000000010 R08: 0000000000000000 R09: ffffabe440f87bb0 [ 547.758707] R10: ffffabe440f87dc8 R11: 0000000000000010 R12: 0000000000000000 [ 547.765834] R13: 0000000000000000 R14: ffff9351df1e5000 R15: 0000000000000000 [ 547.772958] FS: 0000000000000000(0000) GS:ffff93708eb00000(0000) knlGS:0000000000000000 [ 547.781035] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 547.786771] CR2: 0000000000000020 CR3: 00000003cc220002 CR4: 0000000000770ef0 [ 547.793896] PKRU: 55555554 [ 547.796600] Call Trace: [ 547.799046] <TASK> [ 547.801152] ? __die+0x20/0x70 [ 547.804211] ? page_fault_oops+0x75/0x170 [ 547.808221] ? print_hex_dump+0x100/0x160 [ 547.812226] ? exc_page_fault+0x64/0x150 [ 547.816152] ? asm_exc_page_fault+0x22/0x30 [ 547.820341] ? r535_gsp_msg_recv+0x87/0x230 [nvkm] [ 547.825184] r535_gsp_msgq_work+0x42/0x50 [nvkm] [ 547.829845] process_one_work+0x196/0x3d0 [ 547.833861] worker_thread+0x2fc/0x410 [ 547.837613] ? __pfx_worker_thread+0x10/0x10 [ 547.841885] kthread+0xdf/0x110 [ 547.845031] ? __pfx_kthread+0x10/0x10 [ 547.848775] ret_from_fork+0x30/0x50 [ 547.852354] ? __pfx_kthread+0x10/0x10 [ 547.856097] ret_from_fork_asm+0x1a/0x30 [ 547.860019] </TASK> [ 547.862208] Modules linked in: nvkm(E) gsp_log(E) snd_seq_dummy(E) snd_hrtimer(E) snd_seq(E) snd_timer(E) snd_seq_device(E) snd(E) soundcore(E) rfkill(E) qrtr(E) vfat(E) fat(E) ipmi_ssif(E) amd_atl(E) intel_rapl_msr(E) intel_rapl_common(E) amd64_edac(E) mlx5_ib(E) edac_mce_amd(E) kvm_amd ---truncated---

A NULL pointer dereference issue was found in KVM when releasing a vCPU with dirty ring support enabled. This flaw allows an unprivileged local attacker on the host to issue specific ioctl calls, causing a kernel oops condition that results in a denial of service.

An issue was discovered in drivers/media/test-drivers/vidtv/vidtv_bridge.c in the Linux kernel 6.2. There is a NULL pointer dereference in vidtv_mux_stop_thread. In vidtv_stop_streaming, after dvb->mux=NULL occurs, it executes vidtv_mux_stop_thread(dvb->mux).

In the Linux kernel, the following vulnerability has been resolved: clk: qcom: ipq8074: fix PCI-E clock oops Fix PCI-E clock related kernel oops that are caused by a missing clock parent. pcie0_rchng_clk_src has num_parents set to 2 but only one parent is actually set via parent_hws, it should also have "XO" defined. This will cause the kernel to panic on a NULL pointer in clk_core_get_parent_by_index(). So, to fix this utilize clk_parent_data to provide gcc_xo_gpll0 parent data. Since there is already an existing static const char * const gcc_xo_gpll0[] used to provide the same parents via parent_names convert those users to clk_parent_data as well. Without this earlycon is needed to even catch the OOPS as it will reset the board before serial is initialized with the following: [ 0.232279] Unable to handle kernel paging request at virtual address 0000a00000000000 [ 0.232322] Mem abort info: [ 0.239094] ESR = 0x96000004 [ 0.241778] EC = 0x25: DABT (current EL), IL = 32 bits [ 0.244908] SET = 0, FnV = 0 [ 0.250377] EA = 0, S1PTW = 0 [ 0.253236] FSC = 0x04: level 0 translation fault [ 0.256277] Data abort info: [ 0.261141] ISV = 0, ISS = 0x00000004 [ 0.264262] CM = 0, WnR = 0 [ 0.267820] [0000a00000000000] address between user and kernel address ranges [ 0.270954] Internal error: Oops: 96000004 [#1] SMP [ 0.278067] Modules linked in: [ 0.282751] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.15.10 #0 [ 0.285882] Hardware name: Xiaomi AX3600 (DT) [ 0.292043] pstate: 20400005 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 0.296299] pc : clk_core_get_parent_by_index+0x68/0xec [ 0.303067] lr : __clk_register+0x1d8/0x820 [ 0.308273] sp : ffffffc01111b7d0 [ 0.312438] x29: ffffffc01111b7d0 x28: 0000000000000000 x27: 0000000000000040 [ 0.315919] x26: 0000000000000002 x25: 0000000000000000 x24: ffffff8000308800 [ 0.323037] x23: ffffff8000308850 x22: ffffff8000308880 x21: ffffff8000308828 [ 0.330155] x20: 0000000000000028 x19: ffffff8000309700 x18: 0000000000000020 [ 0.337272] x17: 000000005cc86990 x16: 0000000000000004 x15: ffffff80001d9d0a [ 0.344391] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000006 [ 0.351508] x11: 0000000000000003 x10: 0101010101010101 x9 : 0000000000000000 [ 0.358626] x8 : 7f7f7f7f7f7f7f7f x7 : 6468626f5e626266 x6 : 17000a3a403c1b06 [ 0.365744] x5 : 061b3c403a0a0017 x4 : 0000000000000000 x3 : 0000000000000001 [ 0.372863] x2 : 0000a00000000000 x1 : 0000000000000001 x0 : ffffff8000309700 [ 0.379982] Call trace: [ 0.387091] clk_core_get_parent_by_index+0x68/0xec [ 0.389351] __clk_register+0x1d8/0x820 [ 0.394210] devm_clk_hw_register+0x5c/0xe0 [ 0.398030] devm_clk_register_regmap+0x44/0x8c [ 0.402198] qcom_cc_really_probe+0x17c/0x1d0 [ 0.406711] qcom_cc_probe+0x34/0x44 [ 0.411224] gcc_ipq8074_probe+0x18/0x30 [ 0.414869] platform_probe+0x68/0xe0 [ 0.418776] really_probe.part.0+0x9c/0x30c [ 0.422336] __driver_probe_device+0x98/0x144 [ 0.426329] driver_probe_device+0x44/0x11c [ 0.430842] __device_attach_driver+0xb4/0x120 [ 0.434836] bus_for_each_drv+0x68/0xb0 [ 0.439349] __device_attach+0xb0/0x170 [ 0.443081] device_initial_probe+0x14/0x20 [ 0.446901] bus_probe_device+0x9c/0xa4 [ 0.451067] device_add+0x35c/0x834 [ 0.454886] of_device_add+0x54/0x64 [ 0.458360] of_platform_device_create_pdata+0xc0/0x100 [ 0.462181] of_platform_bus_create+0x114/0x370 [ 0.467128] of_platform_bus_create+0x15c/0x370 [ 0.471641] of_platform_populate+0x50/0xcc [ 0.476155] of_platform_default_populate_init+0xa8/0xc8 [ 0.480324] do_one_initcall+0x50/0x1b0 [ 0.485877] kernel_init_freeable+0x234/0x29c [ 0.489436] kernel_init+0x24/0x120 [ 0.493948] ret_from_fork+0x10/0x20 [ 0.497253] Code: d50323bf d65f03c0 f94002a2 b4000302 (f9400042) [ 0.501079] ---[ end trace 4ca7e1129da2abce ]---

A flaw null pointer dereference in the Linux kernel UDF file system functionality was found in the way user triggers udf_file_write_iter function for the malicious UDF image. A local user could use this flaw to crash the system. Actual from Linux kernel 4.2-rc1 till 5.17-rc2.

In the Linux kernel, the following vulnerability has been resolved: net_sched: fix NULL deref in fifo_set_limit() syzbot reported another NULL deref in fifo_set_limit() [1] I could repro the issue with : unshare -n tc qd add dev lo root handle 1:0 tbf limit 200000 burst 70000 rate 100Mbit tc qd replace dev lo parent 1:0 pfifo_fast tc qd change dev lo root handle 1:0 tbf limit 300000 burst 70000 rate 100Mbit pfifo_fast does not have a change() operation. Make fifo_set_limit() more robust about this. [1] BUG: kernel NULL pointer dereference, address: 0000000000000000 PGD 1cf99067 P4D 1cf99067 PUD 7ca49067 PMD 0 Oops: 0010 [#1] PREEMPT SMP KASAN CPU: 1 PID: 14443 Comm: syz-executor959 Not tainted 5.15.0-rc3-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:0x0 Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6. RSP: 0018:ffffc9000e2f7310 EFLAGS: 00010246 RAX: dffffc0000000000 RBX: ffffffff8d6ecc00 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff888024c27910 RDI: ffff888071e34000 RBP: ffff888071e34000 R08: 0000000000000001 R09: ffffffff8fcfb947 R10: 0000000000000001 R11: 0000000000000000 R12: ffff888024c27910 R13: ffff888071e34018 R14: 0000000000000000 R15: ffff88801ef74800 FS: 00007f321d897700(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 00000000722c3000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: fifo_set_limit net/sched/sch_fifo.c:242 [inline] fifo_set_limit+0x198/0x210 net/sched/sch_fifo.c:227 tbf_change+0x6ec/0x16d0 net/sched/sch_tbf.c:418 qdisc_change net/sched/sch_api.c:1332 [inline] tc_modify_qdisc+0xd9a/0x1a60 net/sched/sch_api.c:1634 rtnetlink_rcv_msg+0x413/0xb80 net/core/rtnetlink.c:5572 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2504 netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline] netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1340 netlink_sendmsg+0x86d/0xdb0 net/netlink/af_netlink.c:1929 sock_sendmsg_nosec net/socket.c:704 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:724 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2409 ___sys_sendmsg+0xf3/0x170 net/socket.c:2463 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2492 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae

In the Linux kernel, the following vulnerability has been resolved: PCI/bwctrl: Fix NULL pointer dereference on bus number exhaustion When BIOS neglects to assign bus numbers to PCI bridges, the kernel attempts to correct that during PCI device enumeration. If it runs out of bus numbers, no pci_bus is allocated and the "subordinate" pointer in the bridge's pci_dev remains NULL. The PCIe bandwidth controller erroneously does not check for a NULL subordinate pointer and dereferences it on probe. Bandwidth control of unusable devices below the bridge is of questionable utility, so simply error out instead. This mirrors what PCIe hotplug does since commit 62e4492c3063 ("PCI: Prevent NULL dereference during pciehp probe"). The PCI core emits a message with KERN_INFO severity if it has run out of bus numbers. PCIe hotplug emits an additional message with KERN_ERR severity to inform the user that hotplug functionality is disabled at the bridge. A similar message for bandwidth control does not seem merited, given that its only purpose so far is to expose an up-to-date link speed in sysfs and throttle the link speed on certain laptops with limited Thermal Design Power. So error out silently. User-visible messages: pci 0000:16:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring [...] pci_bus 0000:45: busn_res: [bus 45-74] end is updated to 74 pci 0000:16:02.0: devices behind bridge are unusable because [bus 45-74] cannot be assigned for them [...] pcieport 0000:16:02.0: pciehp: Hotplug bridge without secondary bus, ignoring [...] BUG: kernel NULL pointer dereference RIP: pcie_update_link_speed pcie_bwnotif_enable pcie_bwnotif_probe pcie_port_probe_service really_probe

In the Linux kernel, the following vulnerability has been resolved: nvmet-rdma: Fix NULL deref when SEND is completed with error When running some traffic and taking down the link on peer, a retry counter exceeded error is received. This leads to nvmet_rdma_error_comp which tried accessing the cq_context to obtain the queue. The cq_context is no longer valid after the fix to use shared CQ mechanism and should be obtained similar to how it is obtained in other functions from the wc->qp. [ 905.786331] nvmet_rdma: SEND for CQE 0x00000000e3337f90 failed with status transport retry counter exceeded (12). [ 905.832048] BUG: unable to handle kernel NULL pointer dereference at 0000000000000048 [ 905.839919] PGD 0 P4D 0 [ 905.842464] Oops: 0000 1 SMP NOPTI [ 905.846144] CPU: 13 PID: 1557 Comm: kworker/13:1H Kdump: loaded Tainted: G OE --------- - - 4.18.0-304.el8.x86_64 #1 [ 905.872135] RIP: 0010:nvmet_rdma_error_comp+0x5/0x1b [nvmet_rdma] [ 905.878259] Code: 19 4f c0 e8 89 b3 a5 f6 e9 5b e0 ff ff 0f b7 75 14 4c 89 ea 48 c7 c7 08 1a 4f c0 e8 71 b3 a5 f6 e9 4b e0 ff ff 0f 1f 44 00 00 <48> 8b 47 48 48 85 c0 74 08 48 89 c7 e9 98 bf 49 00 e9 c3 e3 ff ff [ 905.897135] RSP: 0018:ffffab601c45fe28 EFLAGS: 00010246 [ 905.902387] RAX: 0000000000000065 RBX: ffff9e729ea2f800 RCX: 0000000000000000 [ 905.909558] RDX: 0000000000000000 RSI: ffff9e72df9567c8 RDI: 0000000000000000 [ 905.916731] RBP: ffff9e729ea2b400 R08: 000000000000074d R09: 0000000000000074 [ 905.923903] R10: 0000000000000000 R11: ffffab601c45fcc0 R12: 0000000000000010 [ 905.931074] R13: 0000000000000000 R14: 0000000000000010 R15: ffff9e729ea2f400 [ 905.938247] FS: 0000000000000000(0000) GS:ffff9e72df940000(0000) knlGS:0000000000000000 [ 905.938249] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 905.950067] nvmet_rdma: SEND for CQE 0x00000000c7356cca failed with status transport retry counter exceeded (12). [ 905.961855] CR2: 0000000000000048 CR3: 000000678d010004 CR4: 00000000007706e0 [ 905.961855] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 905.961856] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 905.961857] PKRU: 55555554 [ 906.010315] Call Trace: [ 906.012778] __ib_process_cq+0x89/0x170 [ib_core] [ 906.017509] ib_cq_poll_work+0x26/0x80 [ib_core] [ 906.022152] process_one_work+0x1a7/0x360 [ 906.026182] ? create_worker+0x1a0/0x1a0 [ 906.030123] worker_thread+0x30/0x390 [ 906.033802] ? create_worker+0x1a0/0x1a0 [ 906.037744] kthread+0x116/0x130 [ 906.040988] ? kthread_flush_work_fn+0x10/0x10 [ 906.045456] ret_from_fork+0x1f/0x40

In the Linux kernel, the following vulnerability has been resolved: mlxsw: spectrum: Protect driver from buggy firmware When processing port up/down events generated by the device's firmware, the driver protects itself from events reported for non-existent local ports, but not the CPU port (local port 0), which exists, but lacks a netdev. This can result in a NULL pointer dereference when calling netif_carrier_{on,off}(). Fix this by bailing early when processing an event reported for the CPU port. Problem was only observed when running on top of a buggy emulator.

In the Linux kernel, the following vulnerability has been resolved: scsi: hisi_sas: Create all dump files during debugfs initialization For the current debugfs of hisi_sas, after user triggers dump, the driver allocate memory space to save the register information and create debugfs files to display the saved information. In this process, the debugfs files created after each dump. Therefore, when the dump is triggered while the driver is unbind, the following hang occurs: [67840.853907] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a0 [67840.862947] Mem abort info: [67840.865855] ESR = 0x0000000096000004 [67840.869713] EC = 0x25: DABT (current EL), IL = 32 bits [67840.875125] SET = 0, FnV = 0 [67840.878291] EA = 0, S1PTW = 0 [67840.881545] FSC = 0x04: level 0 translation fault [67840.886528] Data abort info: [67840.889524] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [67840.895117] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [67840.900284] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [67840.905709] user pgtable: 4k pages, 48-bit VAs, pgdp=0000002803a1f000 [67840.912263] [00000000000000a0] pgd=0000000000000000, p4d=0000000000000000 [67840.919177] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [67840.996435] pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [67841.003628] pc : down_write+0x30/0x98 [67841.007546] lr : start_creating.part.0+0x60/0x198 [67841.012495] sp : ffff8000b979ba20 [67841.016046] x29: ffff8000b979ba20 x28: 0000000000000010 x27: 0000000000024b40 [67841.023412] x26: 0000000000000012 x25: ffff20202b355ae8 x24: ffff20202b35a8c8 [67841.030779] x23: ffffa36877928208 x22: ffffa368b4972240 x21: ffff8000b979bb18 [67841.038147] x20: ffff00281dc1e3c0 x19: fffffffffffffffe x18: 0000000000000020 [67841.045515] x17: 0000000000000000 x16: ffffa368b128a530 x15: ffffffffffffffff [67841.052888] x14: ffff8000b979bc18 x13: ffffffffffffffff x12: ffff8000b979bb18 [67841.060263] x11: 0000000000000000 x10: 0000000000000000 x9 : ffffa368b1289b18 [67841.067640] x8 : 0000000000000012 x7 : 0000000000000000 x6 : 00000000000003a9 [67841.075014] x5 : 0000000000000000 x4 : ffff002818c5cb00 x3 : 0000000000000001 [67841.082388] x2 : 0000000000000000 x1 : ffff002818c5cb00 x0 : 00000000000000a0 [67841.089759] Call trace: [67841.092456] down_write+0x30/0x98 [67841.096017] start_creating.part.0+0x60/0x198 [67841.100613] debugfs_create_dir+0x48/0x1f8 [67841.104950] debugfs_create_files_v3_hw+0x88/0x348 [hisi_sas_v3_hw] [67841.111447] debugfs_snapshot_regs_v3_hw+0x708/0x798 [hisi_sas_v3_hw] [67841.118111] debugfs_trigger_dump_v3_hw_write+0x9c/0x120 [hisi_sas_v3_hw] [67841.125115] full_proxy_write+0x68/0xc8 [67841.129175] vfs_write+0xd8/0x3f0 [67841.132708] ksys_write+0x70/0x108 [67841.136317] __arm64_sys_write+0x24/0x38 [67841.140440] invoke_syscall+0x50/0x128 [67841.144385] el0_svc_common.constprop.0+0xc8/0xf0 [67841.149273] do_el0_svc+0x24/0x38 [67841.152773] el0_svc+0x38/0xd8 [67841.156009] el0t_64_sync_handler+0xc0/0xc8 [67841.160361] el0t_64_sync+0x1a4/0x1a8 [67841.164189] Code: b9000882 d2800002 d2800023 f9800011 (c85ffc05) [67841.170443] ---[ end trace 0000000000000000 ]--- To fix this issue, create all directories and files during debugfs initialization. In this way, the driver only needs to allocate memory space to save information each time the user triggers dumping.

In the Linux kernel, the following vulnerability has been resolved: scsi: core: Fix bad pointer dereference when ehandler kthread is invalid Commit 66a834d09293 ("scsi: core: Fix error handling of scsi_host_alloc()") changed the allocation logic to call put_device() to perform host cleanup with the assumption that IDA removal and stopping the kthread would properly be performed in scsi_host_dev_release(). However, in the unlikely case that the error handler thread fails to spawn, shost->ehandler is set to ERR_PTR(-ENOMEM). The error handler cleanup code in scsi_host_dev_release() will call kthread_stop() if shost->ehandler != NULL which will always be the case whether the kthread was successfully spawned or not. In the case that it failed to spawn this has the nasty side effect of trying to dereference an invalid pointer when kthread_stop() is called. The following splat provides an example of this behavior in the wild: scsi host11: error handler thread failed to spawn, error = -4 Kernel attempted to read user page (10c) - exploit attempt? (uid: 0) BUG: Kernel NULL pointer dereference on read at 0x0000010c Faulting instruction address: 0xc00000000818e9a8 Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries Modules linked in: ibmvscsi(+) scsi_transport_srp dm_multipath dm_mirror dm_region hash dm_log dm_mod fuse overlay squashfs loop CPU: 12 PID: 274 Comm: systemd-udevd Not tainted 5.13.0-rc7 #1 NIP: c00000000818e9a8 LR: c0000000089846e8 CTR: 0000000000007ee8 REGS: c000000037d12ea0 TRAP: 0300 Not tainted (5.13.0-rc7) MSR: 800000000280b033 &lt;SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE&gt; CR: 28228228 XER: 20040001 CFAR: c0000000089846e4 DAR: 000000000000010c DSISR: 40000000 IRQMASK: 0 GPR00: c0000000089846e8 c000000037d13140 c000000009cc1100 fffffffffffffffc GPR04: 0000000000000001 0000000000000000 0000000000000000 c000000037dc0000 GPR08: 0000000000000000 c000000037dc0000 0000000000000001 00000000fffff7ff GPR12: 0000000000008000 c00000000a049000 c000000037d13d00 000000011134d5a0 GPR16: 0000000000001740 c0080000190d0000 c0080000190d1740 c000000009129288 GPR20: c000000037d13bc0 0000000000000001 c000000037d13bc0 c0080000190b7898 GPR24: c0080000190b7708 0000000000000000 c000000033bb2c48 0000000000000000 GPR28: c000000046b28280 0000000000000000 000000000000010c fffffffffffffffc NIP [c00000000818e9a8] kthread_stop+0x38/0x230 LR [c0000000089846e8] scsi_host_dev_release+0x98/0x160 Call Trace: [c000000033bb2c48] 0xc000000033bb2c48 (unreliable) [c0000000089846e8] scsi_host_dev_release+0x98/0x160 [c00000000891e960] device_release+0x60/0x100 [c0000000087e55c4] kobject_release+0x84/0x210 [c00000000891ec78] put_device+0x28/0x40 [c000000008984ea4] scsi_host_alloc+0x314/0x430 [c0080000190b38bc] ibmvscsi_probe+0x54/0xad0 [ibmvscsi] [c000000008110104] vio_bus_probe+0xa4/0x4b0 [c00000000892a860] really_probe+0x140/0x680 [c00000000892aefc] driver_probe_device+0x15c/0x200 [c00000000892b63c] device_driver_attach+0xcc/0xe0 [c00000000892b740] __driver_attach+0xf0/0x200 [c000000008926f28] bus_for_each_dev+0xa8/0x130 [c000000008929ce4] driver_attach+0x34/0x50 [c000000008928fc0] bus_add_driver+0x1b0/0x300 [c00000000892c798] driver_register+0x98/0x1a0 [c00000000810eb60] __vio_register_driver+0x80/0xe0 [c0080000190b4a30] ibmvscsi_module_init+0x9c/0xdc [ibmvscsi] [c0000000080121d0] do_one_initcall+0x60/0x2d0 [c000000008261abc] do_init_module+0x7c/0x320 [c000000008265700] load_module+0x2350/0x25b0 [c000000008265cb4] __do_sys_finit_module+0xd4/0x160 [c000000008031110] system_call_exception+0x150/0x2d0 [c00000000800d35c] system_call_common+0xec/0x278 Fix this be nulling shost->ehandler when the kthread fails to spawn.

In the Linux kernel, the following vulnerability has been resolved: jfs: fix GPF in diFree Avoid passing inode with JFS_SBI(inode->i_sb)->ipimap == NULL to diFree()[1]. GFP will appear: struct inode *ipimap = JFS_SBI(ip->i_sb)->ipimap; struct inomap *imap = JFS_IP(ipimap)->i_imap; JFS_IP() will return invalid pointer when ipimap == NULL Call Trace: diFree+0x13d/0x2dc0 fs/jfs/jfs_imap.c:853 [1] jfs_evict_inode+0x2c9/0x370 fs/jfs/inode.c:154 evict+0x2ed/0x750 fs/inode.c:578 iput_final fs/inode.c:1654 [inline] iput.part.0+0x3fe/0x820 fs/inode.c:1680 iput+0x58/0x70 fs/inode.c:1670

In the Linux kernel, the following vulnerability has been resolved: btrfs: set BTRFS_ROOT_ORPHAN_CLEANUP during subvol create We have recently observed a number of subvolumes with broken dentries. ls-ing the parent dir looks like: drwxrwxrwt 1 root root 16 Jan 23 16:49 . drwxr-xr-x 1 root root 24 Jan 23 16:48 .. d????????? ? ? ? ? ? broken_subvol and similarly stat-ing the file fails. In this state, deleting the subvol fails with ENOENT, but attempting to create a new file or subvol over it errors out with EEXIST and even aborts the fs. Which leaves us a bit stuck. dmesg contains a single notable error message reading: "could not do orphan cleanup -2" 2 is ENOENT and the error comes from the failure handling path of btrfs_orphan_cleanup(), with the stack leading back up to btrfs_lookup(). btrfs_lookup btrfs_lookup_dentry btrfs_orphan_cleanup // prints that message and returns -ENOENT After some detailed inspection of the internal state, it became clear that: - there are no orphan items for the subvol - the subvol is otherwise healthy looking, it is not half-deleted or anything, there is no drop progress, etc. - the subvol was created a while ago and does the meaningful first btrfs_orphan_cleanup() call that sets BTRFS_ROOT_ORPHAN_CLEANUP much later. - after btrfs_orphan_cleanup() fails, btrfs_lookup_dentry() returns -ENOENT, which results in a negative dentry for the subvolume via d_splice_alias(NULL, dentry), leading to the observed behavior. The bug can be mitigated by dropping the dentry cache, at which point we can successfully delete the subvolume if we want. i.e., btrfs_lookup() btrfs_lookup_dentry() if (!sb_rdonly(inode->vfs_inode)->vfs_inode) btrfs_orphan_cleanup(sub_root) test_and_set_bit(BTRFS_ROOT_ORPHAN_CLEANUP) btrfs_search_slot() // finds orphan item for inode N ... prints "could not do orphan cleanup -2" if (inode == ERR_PTR(-ENOENT)) inode = NULL; return d_splice_alias(NULL, dentry) // NEGATIVE DENTRY for valid subvolume btrfs_orphan_cleanup() does test_and_set_bit(BTRFS_ROOT_ORPHAN_CLEANUP) on the root when it runs, so it cannot run more than once on a given root, so something else must run concurrently. However, the obvious routes to deleting an orphan when nlinks goes to 0 should not be able to run without first doing a lookup into the subvolume, which should run btrfs_orphan_cleanup() and set the bit. The final important observation is that create_subvol() calls d_instantiate_new() but does not set BTRFS_ROOT_ORPHAN_CLEANUP, so if the dentry cache gets dropped, the next lookup into the subvolume will make a real call into btrfs_orphan_cleanup() for the first time. This opens up the possibility of concurrently deleting the inode/orphan items but most typical evict() paths will be holding a reference on the parent dentry (child dentry holds parent->d_lockref.count via dget in d_alloc(), released in __dentry_kill()) and prevent the parent from being removed from the dentry cache. The one exception is delayed iputs. Ordered extent creation calls igrab() on the inode. If the file is unlinked and closed while those refs are held, iput() in __dentry_kill() decrements i_count but does not trigger eviction (i_count > 0). The child dentry is freed and the subvol dentry's d_lockref.count drops to 0, making it evictable while the inode is still alive. Since there are two races (the race between writeback and unlink and the race between lookup and delayed iputs), and there are too many moving parts, the following three diagrams show the complete picture. (Only the second and third are races) Phase 1: Create Subvol in dentry cache without BTRFS_ROOT_ORPHAN_CLEANUP set btrfs_mksubvol() lookup_one_len() __lookup_slow() d_alloc_parallel() __d_alloc() // d_lockref.count = 1 create_subvol(dentry) // doesn't touch the bit.. d_instantiate_new(dentry, inode) // dentry in cache with d_lockref.c ---truncated---

In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Use online_vcpus, not created_vcpus, to iterate over vCPUs Use the kvm_for_each_vcpu() helper to iterate over vCPUs when encrypting VMSAs for SEV, which effectively switches to use online_vcpus instead of created_vcpus. This fixes a possible null-pointer dereference as created_vcpus does not guarantee a vCPU exists, since it is updated at the very beginning of KVM_CREATE_VCPU. created_vcpus exists to allow the bulk of vCPU creation to run in parallel, while still correctly restricting the max number of max vCPUs.

NVIDIA GPU Display Driver for Windows and Linux contains a vulnerability in the kernel mode layer, where a NULL-pointer dereference may lead to denial of service.

In the Linux kernel, the following vulnerability has been resolved: drm/panel: himax-hx83102: Add a check to prevent NULL pointer dereference drm_mode_duplicate() could return NULL due to lack of memory, which will then call NULL pointer dereference. Add a check to prevent it.

NVIDIA vGPU software for Windows and Linux contains a vulnerability in the Virtual GPU Manager (vGPU plugin), where a malicious user in the guest VM can cause a NULL-pointer dereference, which may lead to denial of service.

A flaw was found in the Linux kernel. A null pointer dereference in bond_ipsec_add_sa() may lead to local denial of service.

In the Linux kernel, the following vulnerability has been resolved: arm64: Don't call NULL in do_compat_alignment_fixup() do_alignment_t32_to_handler() only fixes up alignment faults for specific instructions; it returns NULL otherwise (e.g. LDREX). When that's the case, signal to the caller that it needs to proceed with the regular alignment fault handling (i.e. SIGBUS). Without this patch, the kernel panics: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 Mem abort info: ESR = 0x0000000086000006 EC = 0x21: IABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x06: level 2 translation fault user pgtable: 4k pages, 48-bit VAs, pgdp=00000800164aa000 [0000000000000000] pgd=0800081fdbd22003, p4d=0800081fdbd22003, pud=08000815d51c6003, pmd=0000000000000000 Internal error: Oops: 0000000086000006 [#1] SMP Modules linked in: cfg80211 rfkill xt_nat xt_tcpudp xt_conntrack nft_chain_nat xt_MASQUERADE nf_nat nf_conntrack_netlink nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 xfrm_user xfrm_algo xt_addrtype nft_compat br_netfilter veth nvme_fa> libcrc32c crc32c_generic raid0 multipath linear dm_mod dax raid1 md_mod xhci_pci nvme xhci_hcd nvme_core t10_pi usbcore igb crc64_rocksoft crc64 crc_t10dif crct10dif_generic crct10dif_ce crct10dif_common usb_common i2c_algo_bit i2c> CPU: 2 PID: 3932954 Comm: WPEWebProcess Not tainted 6.1.0-31-arm64 #1 Debian 6.1.128-1 Hardware name: GIGABYTE MP32-AR1-00/MP32-AR1-00, BIOS F18v (SCP: 1.08.20211002) 12/01/2021 pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : 0x0 lr : do_compat_alignment_fixup+0xd8/0x3dc sp : ffff80000f973dd0 x29: ffff80000f973dd0 x28: ffff081b42526180 x27: 0000000000000000 x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000 x23: 0000000000000004 x22: 0000000000000000 x21: 0000000000000001 x20: 00000000e8551f00 x19: ffff80000f973eb0 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : ffffaebc949bc488 x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000000000 x5 : 0000000000400000 x4 : 0000fffffffffffe x3 : 0000000000000000 x2 : ffff80000f973eb0 x1 : 00000000e8551f00 x0 : 0000000000000001 Call trace: 0x0 do_alignment_fault+0x40/0x50 do_mem_abort+0x4c/0xa0 el0_da+0x48/0xf0 el0t_32_sync_handler+0x110/0x140 el0t_32_sync+0x190/0x194 Code: bad PC value ---[ end trace 0000000000000000 ]---

NVIDIA GPU Driver for Windows and Linux contains a vulnerability in the kernel mode layer, where an unprivileged regular user can cause a NULL-pointer dereference, which may lead to denial of service.

A NULL pointer dereference flaw was found in the Linux kernel's BPF subsystem in the way a user triggers the map_get_next_key function of the BPF bloom filter. This flaw allows a local user to crash the system. This flaw affects Linux kernel versions prior to 5.17-rc1.

In the Linux kernel, the following vulnerability has been resolved: arm: pgtable: fix NULL pointer dereference issue When update_mmu_cache_range() is called by update_mmu_cache(), the vmf parameter is NULL, which will cause a NULL pointer dereference issue in adjust_pte(): Unable to handle kernel NULL pointer dereference at virtual address 00000030 when read Hardware name: Atmel AT91SAM9 PC is at update_mmu_cache_range+0x1e0/0x278 LR is at pte_offset_map_rw_nolock+0x18/0x2c Call trace: update_mmu_cache_range from remove_migration_pte+0x29c/0x2ec remove_migration_pte from rmap_walk_file+0xcc/0x130 rmap_walk_file from remove_migration_ptes+0x90/0xa4 remove_migration_ptes from migrate_pages_batch+0x6d4/0x858 migrate_pages_batch from migrate_pages+0x188/0x488 migrate_pages from compact_zone+0x56c/0x954 compact_zone from compact_node+0x90/0xf0 compact_node from kcompactd+0x1d4/0x204 kcompactd from kthread+0x120/0x12c kthread from ret_from_fork+0x14/0x38 Exception stack(0xc0d8bfb0 to 0xc0d8bff8) To fix it, do not rely on whether 'ptl' is equal to decide whether to hold the pte lock, but decide it by whether CONFIG_SPLIT_PTE_PTLOCKS is enabled. In addition, if two vmas map to the same PTE page, there is no need to hold the pte lock again, otherwise a deadlock will occur. Just add the need_lock parameter to let adjust_pte() know this information.

In the Linux kernel, the following vulnerability has been resolved: cpufreq/amd-pstate: Add missing NULL ptr check in amd_pstate_update Check if policy is NULL before dereferencing it in amd_pstate_update.

In the Linux kernel before 5.6.1, drivers/media/usb/gspca/xirlink_cit.c (aka the Xirlink camera USB driver) mishandles invalid descriptors, aka CID-a246b4d54770.

In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: Fix oops due to NULL pointer dereference in brcmf_sdiod_sglist_rw() This patch fixes a NULL pointer dereference bug in brcmfmac that occurs when a high 'sd_sgentry_align' value applies (e.g. 512) and a lot of queued SKBs are sent from the pkt queue. The problem is the number of entries in the pre-allocated sgtable, it is nents = max(rxglom_size, txglom_size) + max(rxglom_size, txglom_size) >> 4 + 1. Given the default [rt]xglom_size=32 it's actually 35 which is too small. Worst case, the pkt queue can end up with 64 SKBs. This occurs when a new SKB is added for each original SKB if tailroom isn't enough to hold tail_pad. At least one sg entry is needed for each SKB. So, eventually the "skb_queue_walk loop" in brcmf_sdiod_sglist_rw may run out of sg entries. This makes sg_next return NULL and this causes the oops. The patch sets nents to max(rxglom_size, txglom_size) * 2 to be able handle the worst-case. Btw. this requires only 64-35=29 * 16 (or 20 if CONFIG_NEED_SG_DMA_LENGTH) = 464 additional bytes of memory.

In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Reserve extra IRQ vectors Commit a6dcfe08487e ("scsi: qla2xxx: Limit interrupt vectors to number of CPUs") lowers the number of allocated MSI-X vectors to the number of CPUs. That breaks vector allocation assumptions in qla83xx_iospace_config(), qla24xx_enable_msix() and qla2x00_iospace_config(). Either of the functions computes maximum number of qpairs as: ha->max_qpairs = ha->msix_count - 1 (MB interrupt) - 1 (default response queue) - 1 (ATIO, in dual or pure target mode) max_qpairs is set to zero in case of two CPUs and initiator mode. The number is then used to allocate ha->queue_pair_map inside qla2x00_alloc_queues(). No allocation happens and ha->queue_pair_map is left NULL but the driver thinks there are queue pairs available. qla2xxx_queuecommand() tries to find a qpair in the map and crashes: if (ha->mqenable) { uint32_t tag; uint16_t hwq; struct qla_qpair *qpair = NULL; tag = blk_mq_unique_tag(cmd->request); hwq = blk_mq_unique_tag_to_hwq(tag); qpair = ha->queue_pair_map[hwq]; # <- HERE if (qpair) return qla2xxx_mqueuecommand(host, cmd, qpair); } BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 0 PID: 72 Comm: kworker/u4:3 Tainted: G W 5.10.0-rc1+ #25 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014 Workqueue: scsi_wq_7 fc_scsi_scan_rport [scsi_transport_fc] RIP: 0010:qla2xxx_queuecommand+0x16b/0x3f0 [qla2xxx] Call Trace: scsi_queue_rq+0x58c/0xa60 blk_mq_dispatch_rq_list+0x2b7/0x6f0 ? __sbitmap_get_word+0x2a/0x80 __blk_mq_sched_dispatch_requests+0xb8/0x170 blk_mq_sched_dispatch_requests+0x2b/0x50 __blk_mq_run_hw_queue+0x49/0xb0 __blk_mq_delay_run_hw_queue+0xfb/0x150 blk_mq_sched_insert_request+0xbe/0x110 blk_execute_rq+0x45/0x70 __scsi_execute+0x10e/0x250 scsi_probe_and_add_lun+0x228/0xda0 __scsi_scan_target+0xf4/0x620 ? __pm_runtime_resume+0x4f/0x70 scsi_scan_target+0x100/0x110 fc_scsi_scan_rport+0xa1/0xb0 [scsi_transport_fc] process_one_work+0x1ea/0x3b0 worker_thread+0x28/0x3b0 ? process_one_work+0x3b0/0x3b0 kthread+0x112/0x130 ? kthread_park+0x80/0x80 ret_from_fork+0x22/0x30 The driver should allocate enough vectors to provide every CPU it's own HW queue and still handle reserved (MB, RSP, ATIO) interrupts. The change fixes the crash on dual core VM and prevents unbalanced QP allocation where nr_hw_queues is two less than the number of CPUs.

In the Linux kernel, the following vulnerability has been resolved: net: fujitsu: fix potential null-ptr-deref In fmvj18x_get_hwinfo(), if ioremap fails there will be NULL pointer deref. To fix this, check the return value of ioremap and return -1 to the caller in case of failure.

In the Linux kernel, the following vulnerability has been resolved: HID: magicmouse: fix NULL-deref on disconnect Commit 9d7b18668956 ("HID: magicmouse: add support for Apple Magic Trackpad 2") added a sanity check for an Apple trackpad but returned success instead of -ENODEV when the check failed. This means that the remove callback will dereference the never-initialised driver data pointer when the driver is later unbound (e.g. on USB disconnect).

In the Linux kernel, the following vulnerability has been resolved: SUNRPC: Fix null pointer dereference in svc_rqst_free() When alloc_pages_node() returns null in svc_rqst_alloc(), the null rq_scratch_page pointer will be dereferenced when calling put_page() in svc_rqst_free(). Fix it by adding a null check. Addresses-Coverity: ("Dereference after null check")

In the Linux kernel, the following vulnerability has been resolved: usb: chipidea: ci_hdrc_imx: Also search for 'phys' phandle When passing 'phys' in the devicetree to describe the USB PHY phandle (which is the recommended way according to Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt) the following NULL pointer dereference is observed on i.MX7 and i.MX8MM: [ 1.489344] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000098 [ 1.498170] Mem abort info: [ 1.500966] ESR = 0x96000044 [ 1.504030] EC = 0x25: DABT (current EL), IL = 32 bits [ 1.509356] SET = 0, FnV = 0 [ 1.512416] EA = 0, S1PTW = 0 [ 1.515569] FSC = 0x04: level 0 translation fault [ 1.520458] Data abort info: [ 1.523349] ISV = 0, ISS = 0x00000044 [ 1.527196] CM = 0, WnR = 1 [ 1.530176] [0000000000000098] user address but active_mm is swapper [ 1.536544] Internal error: Oops: 96000044 [#1] PREEMPT SMP [ 1.542125] Modules linked in: [ 1.545190] CPU: 3 PID: 7 Comm: kworker/u8:0 Not tainted 5.14.0-dirty #3 [ 1.551901] Hardware name: Kontron i.MX8MM N801X S (DT) [ 1.557133] Workqueue: events_unbound deferred_probe_work_func [ 1.562984] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO BTYPE=--) [ 1.568998] pc : imx7d_charger_detection+0x3f0/0x510 [ 1.573973] lr : imx7d_charger_detection+0x22c/0x510 This happens because the charger functions check for the phy presence inside the imx_usbmisc_data structure (data->usb_phy), but the chipidea core populates the usb_phy passed via 'phys' inside 'struct ci_hdrc' (ci->usb_phy) instead. This causes the NULL pointer dereference inside imx7d_charger_detection(). Fix it by also searching for 'phys' in case 'fsl,usbphy' is not found. Tested on a imx7s-warp board.

In the Linux kernel, the following vulnerability has been resolved: can: mcp251x: fix resume from sleep before interface was brought up Since 8ce8c0abcba3 the driver queues work via priv->restart_work when resuming after suspend, even when the interface was not previously enabled. This causes a null dereference error as the workqueue is only allocated and initialized in mcp251x_open(). To fix this we move the workqueue init to mcp251x_can_probe() as there is no reason to do it later and repeat it whenever mcp251x_open() is called. [mkl: fix error handling in mcp251x_stop()]

In the Linux kernel, the following vulnerability has been resolved: drm/xe/hmm: Don't dereference struct page pointers without notifier lock The pnfs that we obtain from hmm_range_fault() point to pages that we don't have a reference on, and the guarantee that they are still in the cpu page-tables is that the notifier lock must be held and the notifier seqno is still valid. So while building the sg table and marking the pages accesses / dirty we need to hold this lock with a validated seqno. However, the lock is reclaim tainted which makes sg_alloc_table_from_pages_segment() unusable, since it internally allocates memory. Instead build the sg-table manually. For the non-iommu case this might lead to fewer coalesces, but if that's a problem it can be fixed up later in the resource cursor code. For the iommu case, the whole sg-table may still be coalesced to a single contigous device va region. This avoids marking pages that we don't own dirty and accessed, and it also avoid dereferencing struct pages that we don't own. v2: - Use assert to check whether hmm pfns are valid (Matthew Auld) - Take into account that large pages may cross range boundaries (Matthew Auld) v3: - Don't unnecessarily check for a non-freed sg-table. (Matthew Auld) - Add a missing up_read() in an error path. (Matthew Auld) (cherry picked from commit ea3e66d280ce2576664a862693d1da8fd324c317)

In the Linux kernel, the following vulnerability has been resolved: x86/hyperv: Fix NULL deref in set_hv_tscchange_cb() if Hyper-V setup fails Check for a valid hv_vp_index array prior to derefencing hv_vp_index when setting Hyper-V's TSC change callback. If Hyper-V setup failed in hyperv_init(), the kernel will still report that it's running under Hyper-V, but will have silently disabled nearly all functionality. BUG: kernel NULL pointer dereference, address: 0000000000000010 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] SMP CPU: 4 PID: 1 Comm: swapper/0 Not tainted 5.15.0-rc2+ #75 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:set_hv_tscchange_cb+0x15/0xa0 Code: <8b> 04 82 8b 15 12 17 85 01 48 c1 e0 20 48 0d ee 00 01 00 f6 c6 08 ... Call Trace: kvm_arch_init+0x17c/0x280 kvm_init+0x31/0x330 vmx_init+0xba/0x13a do_one_initcall+0x41/0x1c0 kernel_init_freeable+0x1f2/0x23b kernel_init+0x16/0x120 ret_from_fork+0x22/0x30

In the Linux kernel, the following vulnerability has been resolved: efi/fdt: fix panic when no valid fdt found setup_arch() would invoke efi_init()->efi_get_fdt_params(). If no valid fdt found then initial_boot_params will be null. So we should stop further fdt processing here. I encountered this issue on risc-v.

In the Linux kernel, the following vulnerability has been resolved: net: hns3: fix kernel crash when 1588 is sent on HIP08 devices Currently, HIP08 devices does not register the ptp devices, so the hdev->ptp is NULL. But the tx process would still try to set hardware time stamp info with SKBTX_HW_TSTAMP flag and cause a kernel crash. [ 128.087798] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000018 ... [ 128.280251] pc : hclge_ptp_set_tx_info+0x2c/0x140 [hclge] [ 128.286600] lr : hclge_ptp_set_tx_info+0x20/0x140 [hclge] [ 128.292938] sp : ffff800059b93140 [ 128.297200] x29: ffff800059b93140 x28: 0000000000003280 [ 128.303455] x27: ffff800020d48280 x26: ffff0cb9dc814080 [ 128.309715] x25: ffff0cb9cde93fa0 x24: 0000000000000001 [ 128.315969] x23: 0000000000000000 x22: 0000000000000194 [ 128.322219] x21: ffff0cd94f986000 x20: 0000000000000000 [ 128.328462] x19: ffff0cb9d2a166c0 x18: 0000000000000000 [ 128.334698] x17: 0000000000000000 x16: ffffcf1fc523ed24 [ 128.340934] x15: 0000ffffd530a518 x14: 0000000000000000 [ 128.347162] x13: ffff0cd6bdb31310 x12: 0000000000000368 [ 128.353388] x11: ffff0cb9cfbc7070 x10: ffff2cf55dd11e02 [ 128.359606] x9 : ffffcf1f85a212b4 x8 : ffff0cd7cf27dab0 [ 128.365831] x7 : 0000000000000a20 x6 : ffff0cd7cf27d000 [ 128.372040] x5 : 0000000000000000 x4 : 000000000000ffff [ 128.378243] x3 : 0000000000000400 x2 : ffffcf1f85a21294 [ 128.384437] x1 : ffff0cb9db520080 x0 : ffff0cb9db500080 [ 128.390626] Call trace: [ 128.393964] hclge_ptp_set_tx_info+0x2c/0x140 [hclge] [ 128.399893] hns3_nic_net_xmit+0x39c/0x4c4 [hns3] [ 128.405468] xmit_one.constprop.0+0xc4/0x200 [ 128.410600] dev_hard_start_xmit+0x54/0xf0 [ 128.415556] sch_direct_xmit+0xe8/0x634 [ 128.420246] __dev_queue_xmit+0x224/0xc70 [ 128.425101] dev_queue_xmit+0x1c/0x40 [ 128.429608] ovs_vport_send+0xac/0x1a0 [openvswitch] [ 128.435409] do_output+0x60/0x17c [openvswitch] [ 128.440770] do_execute_actions+0x898/0x8c4 [openvswitch] [ 128.446993] ovs_execute_actions+0x64/0xf0 [openvswitch] [ 128.453129] ovs_dp_process_packet+0xa0/0x224 [openvswitch] [ 128.459530] ovs_vport_receive+0x7c/0xfc [openvswitch] [ 128.465497] internal_dev_xmit+0x34/0xb0 [openvswitch] [ 128.471460] xmit_one.constprop.0+0xc4/0x200 [ 128.476561] dev_hard_start_xmit+0x54/0xf0 [ 128.481489] __dev_queue_xmit+0x968/0xc70 [ 128.486330] dev_queue_xmit+0x1c/0x40 [ 128.490856] ip_finish_output2+0x250/0x570 [ 128.495810] __ip_finish_output+0x170/0x1e0 [ 128.500832] ip_finish_output+0x3c/0xf0 [ 128.505504] ip_output+0xbc/0x160 [ 128.509654] ip_send_skb+0x58/0xd4 [ 128.513892] udp_send_skb+0x12c/0x354 [ 128.518387] udp_sendmsg+0x7a8/0x9c0 [ 128.522793] inet_sendmsg+0x4c/0x8c [ 128.527116] __sock_sendmsg+0x48/0x80 [ 128.531609] __sys_sendto+0x124/0x164 [ 128.536099] __arm64_sys_sendto+0x30/0x5c [ 128.540935] invoke_syscall+0x50/0x130 [ 128.545508] el0_svc_common.constprop.0+0x10c/0x124 [ 128.551205] do_el0_svc+0x34/0xdc [ 128.555347] el0_svc+0x20/0x30 [ 128.559227] el0_sync_handler+0xb8/0xc0 [ 128.563883] el0_sync+0x160/0x180

In the Linux kernel, the following vulnerability has been resolved: mptcp: remove tcp ulp setsockopt support TCP_ULP setsockopt cannot be used for mptcp because its already used internally to plumb subflow (tcp) sockets to the mptcp layer. syzbot managed to trigger a crash for mptcp connections that are in fallback mode: KASAN: null-ptr-deref in range [0x0000000000000020-0x0000000000000027] CPU: 1 PID: 1083 Comm: syz-executor.3 Not tainted 5.16.0-rc2-syzkaller #0 RIP: 0010:tls_build_proto net/tls/tls_main.c:776 [inline] [..] __tcp_set_ulp net/ipv4/tcp_ulp.c:139 [inline] tcp_set_ulp+0x428/0x4c0 net/ipv4/tcp_ulp.c:160 do_tcp_setsockopt+0x455/0x37c0 net/ipv4/tcp.c:3391 mptcp_setsockopt+0x1b47/0x2400 net/mptcp/sockopt.c:638 Remove support for TCP_ULP setsockopt.

In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: ipc4-topology: Harden loops for looking up ALH copiers Other, non DAI copier widgets could have the same stream name (sname) as the ALH copier and in that case the copier->data is NULL, no alh_data is attached, which could lead to NULL pointer dereference. We could check for this NULL pointer in sof_ipc4_prepare_copier_module() and avoid the crash, but a similar loop in sof_ipc4_widget_setup_comp_dai() will miscalculate the ALH device count, causing broken audio. The correct fix is to harden the matching logic by making sure that the 1. widget is a DAI widget - so dai = w->private is valid 2. the dai (and thus the copier) is ALH copier

In the Linux kernel, the following vulnerability has been resolved: powerpc/pseries/iommu: Don't unset window if it was never set On pSeries, when user attempts to use the same vfio container used by different iommu group, the spapr_tce_set_window() returns -EPERM and the subsequent cleanup leads to the below crash. Kernel attempted to read user page (308) - exploit attempt? BUG: Kernel NULL pointer dereference on read at 0x00000308 Faulting instruction address: 0xc0000000001ce358 Oops: Kernel access of bad area, sig: 11 [#1] NIP: c0000000001ce358 LR: c0000000001ce05c CTR: c00000000005add0 <snip> NIP [c0000000001ce358] spapr_tce_unset_window+0x3b8/0x510 LR [c0000000001ce05c] spapr_tce_unset_window+0xbc/0x510 Call Trace: spapr_tce_unset_window+0xbc/0x510 (unreliable) tce_iommu_attach_group+0x24c/0x340 [vfio_iommu_spapr_tce] vfio_container_attach_group+0xec/0x240 [vfio] vfio_group_fops_unl_ioctl+0x548/0xb00 [vfio] sys_ioctl+0x754/0x1580 system_call_exception+0x13c/0x330 system_call_vectored_common+0x15c/0x2ec <snip> --- interrupt: 3000 Fix this by having null check for the tbl passed to the spapr_tce_unset_window().

In the Linux kernel, the following vulnerability has been resolved: HID: bigbenff: prevent null pointer dereference When emulating the device through uhid, there is a chance we don't have output reports and so report_field is null.

In the Linux kernel, the following vulnerability has been resolved: drm/msm: Fix null ptr access msm_ioctl_gem_submit() Fix the below null pointer dereference in msm_ioctl_gem_submit(): 26545.260705: Call trace: 26545.263223: kref_put+0x1c/0x60 26545.266452: msm_ioctl_gem_submit+0x254/0x744 26545.270937: drm_ioctl_kernel+0xa8/0x124 26545.274976: drm_ioctl+0x21c/0x33c 26545.278478: drm_compat_ioctl+0xdc/0xf0 26545.282428: __arm64_compat_sys_ioctl+0xc8/0x100 26545.287169: el0_svc_common+0xf8/0x250 26545.291025: do_el0_svc_compat+0x28/0x54 26545.295066: el0_svc_compat+0x10/0x1c 26545.298838: el0_sync_compat_handler+0xa8/0xcc 26545.303403: el0_sync_compat+0x188/0x1c0 26545.307445: Code: d503201f d503201f 52800028 4b0803e8 (b8680008) 26545.318799: Kernel panic - not syncing: Oops: Fatal exception

In the Linux kernel, the following vulnerability has been resolved: ice: track AF_XDP ZC enabled queues in bitmap Commit c7a219048e45 ("ice: Remove xsk_buff_pool from VSI structure") silently introduced a regression and broke the Tx side of AF_XDP in copy mode. xsk_pool on ice_ring is set only based on the existence of the XDP prog on the VSI which in turn picks ice_clean_tx_irq_zc to be executed. That is not something that should happen for copy mode as it should use the regular data path ice_clean_tx_irq. This results in a following splat when xdpsock is run in txonly or l2fwd scenarios in copy mode: <snip> [ 106.050195] BUG: kernel NULL pointer dereference, address: 0000000000000030 [ 106.057269] #PF: supervisor read access in kernel mode [ 106.062493] #PF: error_code(0x0000) - not-present page [ 106.067709] PGD 0 P4D 0 [ 106.070293] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 106.074721] CPU: 61 PID: 0 Comm: swapper/61 Not tainted 5.12.0-rc2+ #45 [ 106.081436] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019 [ 106.092027] RIP: 0010:xp_raw_get_dma+0x36/0x50 [ 106.096551] Code: 74 14 48 b8 ff ff ff ff ff ff 00 00 48 21 f0 48 c1 ee 30 48 01 c6 48 8b 87 90 00 00 00 48 89 f2 81 e6 ff 0f 00 00 48 c1 ea 0c <48> 8b 04 d0 48 83 e0 fe 48 01 f0 c3 66 66 2e 0f 1f 84 00 00 00 00 [ 106.115588] RSP: 0018:ffffc9000d694e50 EFLAGS: 00010206 [ 106.120893] RAX: 0000000000000000 RBX: ffff88984b8c8a00 RCX: ffff889852581800 [ 106.128137] RDX: 0000000000000006 RSI: 0000000000000000 RDI: ffff88984cd8b800 [ 106.135383] RBP: ffff888123b50001 R08: ffff889896800000 R09: 0000000000000800 [ 106.142628] R10: 0000000000000000 R11: ffffffff826060c0 R12: 00000000000000ff [ 106.149872] R13: 0000000000000000 R14: 0000000000000040 R15: ffff888123b50018 [ 106.157117] FS: 0000000000000000(0000) GS:ffff8897e0f40000(0000) knlGS:0000000000000000 [ 106.165332] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 106.171163] CR2: 0000000000000030 CR3: 000000000560a004 CR4: 00000000007706e0 [ 106.178408] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 106.185653] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 106.192898] PKRU: 55555554 [ 106.195653] Call Trace: [ 106.198143] <IRQ> [ 106.200196] ice_clean_tx_irq_zc+0x183/0x2a0 [ice] [ 106.205087] ice_napi_poll+0x3e/0x590 [ice] [ 106.209356] __napi_poll+0x2a/0x160 [ 106.212911] net_rx_action+0xd6/0x200 [ 106.216634] __do_softirq+0xbf/0x29b [ 106.220274] irq_exit_rcu+0x88/0xc0 [ 106.223819] common_interrupt+0x7b/0xa0 [ 106.227719] </IRQ> [ 106.229857] asm_common_interrupt+0x1e/0x40 </snip> Fix this by introducing the bitmap of queues that are zero-copy enabled, where each bit, corresponding to a queue id that xsk pool is being configured on, will be set/cleared within ice_xsk_pool_{en,dis}able and checked within ice_xsk_pool(). The latter is a function used for deciding which napi poll routine is executed. Idea is being taken from our other drivers such as i40e and ixgbe.

In the Linux kernel, the following vulnerability has been resolved: usb: musb: dsps: Fix the probe error path Commit 7c75bde329d7 ("usb: musb: musb_dsps: request_irq() after initializing musb") has inverted the calls to dsps_setup_optional_vbus_irq() and dsps_create_musb_pdev() without updating correctly the error path. dsps_create_musb_pdev() allocates and registers a new platform device which must be unregistered and freed with platform_device_unregister(), and this is missing upon dsps_setup_optional_vbus_irq() error. While on the master branch it seems not to trigger any issue, I observed a kernel crash because of a NULL pointer dereference with a v5.10.70 stable kernel where the patch mentioned above was backported. With this kernel version, -EPROBE_DEFER is returned the first time dsps_setup_optional_vbus_irq() is called which triggers the probe to error out without unregistering the platform device. Unfortunately, on the Beagle Bone Black Wireless, the platform device still living in the system is being used by the USB Ethernet gadget driver, which during the boot phase triggers the crash. My limited knowledge of the musb world prevents me to revert this commit which was sent to silence a robot warning which, as far as I understand, does not make sense. The goal of this patch was to prevent an IRQ to fire before the platform device being registered. I think this cannot ever happen due to the fact that enabling the interrupts is done by the ->enable() callback of the platform musb device, and this platform device must be already registered in order for the core or any other user to use this callback. Hence, I decided to fix the error path, which might prevent future errors on mainline kernels while also fixing older ones.

In the Linux kernel, the following vulnerability has been resolved: net: ieee802154: fix null deref in parse dev addr Fix a logic error that could result in a null deref if the user sets the mode incorrectly for the given addr type.