Axway Secure Messenger before 6.5 Updated Release 7, as used in Axway Email Firewall, provides different responses to authentication requests depending on whether the user exists, which allows remote attackers to enumerate users via a series of requests.

AirDroid 1.0.4 beta implements authentication through direct transmission of a password hash over HTTP, which makes it easier for remote attackers to obtain access by sniffing the local wireless network and then replaying the authentication data.

SuiteCRM is an open-source, enterprise-ready Customer Relationship Management (CRM) software application. In versions 7.14.6 and 8.8.0, the broken authentication in the legacy iCal service allows unauthenticated access to meeting data. An unauthenticated actor can view any user's meeting (calendar event) data given their username, related functionality allows user enumeration. This is fixed in versions 7.14.7 and 8.8.1.

An issue was discovered on D-Link DCS-1130 and DCS-1100 devices. The binary rtspd in /sbin folder of the device handles all the rtsp connections received by the device. It seems that the binary loads at address 0x00012CF4 a flag called "Authenticate" that indicates whether a user should be authenticated or not before allowing access to the video feed. By default, the value for this flag is zero and can be set/unset using the HTTP interface and network settings tab as shown below. The device requires that a user logging to the HTTP management interface of the device to provide a valid username and password. However, the device does not enforce the same restriction by default on RTSP URL due to the checkbox unchecked by default, thereby allowing any attacker in possession of external IP address of the camera to view the live video feed. The severity of this attack is enlarged by the fact that there more than 100,000 D-Link devices out there.

Xiaomi router R3600 ROM before 1.0.50 is affected by a sensitive information leakage caused by an insecure interface get_config_result without authentication

An improper authentication vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow users to compromise the security of the system via a network. We have already fixed the vulnerability in the following versions: QTS 5.1.3.2578 build 20231110 and later QuTS hero h5.1.3.2578 build 20231110 and later QuTScloud c5.1.5.2651 and later

On Wireless IP Camera (P2P) WIFICAM devices, an attacker can use the RTSP server on port 10554/tcp to watch the streaming without authentication via tcp/av0_1 or tcp/av0_0.

file/edit_html.cgi in Webmin 1.590 and earlier does not perform an authorization check before showing a file's unedited contents, which allows remote attackers to read arbitrary files via the file field.

The Java servlets in the management console in IBM Tivoli Federated Identity Manager (TFIM) through 6.2.2 and Tivoli Federated Identity Manager Business Gateway (TFIMBG) before 6.2.2 do not require authentication for all resource downloads, which allows remote attackers to bypass intended J2EE security constraints, and obtain sensitive information related to (1) federation metadata or (2) a web plugin configuration template, via a crafted request.

Zoho ManageEngine OpManager before 125120 allows an unauthenticated user to retrieve an API key via a servlet call.

The web management interface on the LG-Nortel ELO GS24M switch allows remote attackers to bypass authentication, and consequently obtain cleartext credential and configuration information, via a direct request to a configuration web page.

The Limit Login Attempts plugin before 1.7.1 for WordPress does not clear auth cookies upon a lockout, which might make it easier for remote attackers to conduct brute-force authentication attempts.

Cisco Adaptive Security Appliances (ASA) 5500 series devices with software 7.2 through 8.4 do not properly perform proxy authentication during attempts to cut through a firewall, which allows remote attackers to obtain sensitive information via a connection attempt, aka Bug ID CSCtx42746.

Televes COAXDATA GATEWAY 1Gbps devices doc-wifi-hgw_v1.02.0014 4.20 do not check password.shtml authorization, leading to Arbitrary password change.

Detcon Sitewatch Gateway, all versions without cellular, Passwords are presented in plaintext in a file that is accessible without authentication.

An issue was discovered in Tenda AC8 v4.0 AC1200 Dual-band Gigabit Wireless Router AC8v4.0 Firmware 16.03.33.05. The root password of the device is calculated with a static string and the last two octets of the MAC address of the device. This allows an unauthenticated attacker to authenticate with network services on the device.

An Improper Authentication vulnerability in cert-mgmt.php, used by the J-Web component of Juniper Networks Junos OS allows an unauthenticated, network-based attacker to read arbitrary files from temporary folders on the device. This issue affects Juniper Networks Junos OS: All versions prior to 19.1R3-S10; 19.2 versions prior to 19.2R3-S7; 19.3 versions prior to 19.3R3-S8; 19.4 versions prior to 19.4R3-S11; 20.1 version 20.1R1 and later versions; 20.2 versions prior to 20.2R3-S7; 20.3 version 20.3R1 and later versions; 20.4 versions prior to 20.4R3-S6; 21.1 versions prior to 21.1R3-S5; 21.2 versions prior to 21.2R3-S4; 21.3 versions prior to 21.3R3-S3; 21.4 versions prior to 21.4R3-S3; 22.1 versions prior to 22.1R3-S1; 22.2 versions prior to 22.2R2-S1, 22.2R3; 22.3 versions prior to 22.3R1-S2, 22.3R2.

Zoho ManageEngine Applications Manager 14 before 14520 allows a remote unauthenticated attacker to disclose OS file names via FailOverHelperServlet.

In Couchbase Server 5 through 7 before 7.1.4, the nsstats endpoint is accessible without authentication.

A certain router administration interface (that includes Realtek APMIB 0.11f for Boa 0.94.14rc21) allows remote attackers to retrieve the configuration, including sensitive data (usernames and passwords). This affects TOTOLINK A3002RU through 2.0.0, A702R through 2.1.3, N301RT through 2.1.6, N302R through 3.4.0, N300RT through 3.4.0, N200RE through 4.0.0, N150RT through 3.4.0, and N100RE through 3.4.0; Rutek RTK 11N AP through 2019-12-12; Sapido GR297n through 2019-12-12; CIK TELECOM MESH ROUTER through 2019-12-12; KCTVJEJU Wireless AP through 2019-12-12; Fibergate FGN-R2 through 2019-12-12; Hi-Wifi MAX-C300N through 2019-12-12; HCN MAX-C300N through 2019-12-12; T-broad GN-866ac through 2019-12-12; Coship EMTA AP through 2019-12-12; and IO-Data WN-AC1167R through 2019-12-12.

IBM Planning Analytics Cartridge for Cloud Pak for Data 4.0 connects to a CouchDB server. An attacker can exploit an insecure password policy to the CouchDB server and collect sensitive information from the database. IBM X-Force ID: 247905.

Missing authentication in the GetLogFiles method in IDAttend’s IDWeb application 3.1.052 and earlier allows retrieval of sensitive log files by unauthenticated attackers.

A vulnerability has been identified in SPPA-T3000 Application Server (All versions < Service Pack R8.2 SP2). The AdminService is available without authentication on the Application Server. An attacker can use methods exposed via this interface to receive password hashes of other users and to change user passwords. Please note that an attacker needs to have access to the Application Highway in order to exploit this vulnerability. At the time of advisory publication no public exploitation of this security vulnerability was known.

In JetBrains YouTrack before 2025.1.74704 restricted attachments could become visible after issue cloning

A vulnerability in the web UI of Cisco Small Business Switches could allow an unauthenticated, remote attacker to access sensitive device information. The vulnerability exists because the software lacks proper authentication controls to information accessible from the web UI. An attacker could exploit this vulnerability by sending a malicious HTTP request to the web UI of an affected device. A successful exploit could allow the attacker to access sensitive device information, which includes configuration files.

The Crypto plugin for WordPress is vulnerable to Information exposure in all versions up to, and including, 2.22. This is due to the plugin registering an unauthenticated AJAX action (wp_ajax_nopriv_crypto_connect_ajax_process) that allows calling the register and savenft methods with only a publicly-available nonce check and no wallet signature verification. This makes it possible for unauthenticated attackers to set a site-wide global authentication state via a single transient, bypassing all access controls for ALL visitors to the site. The impact is complete bypass of [crypto-block] shortcode restrictions and page-level access controls, affecting all site visitors for one hour, plus the ability to inject arbitrary data into the plugin's custom_users table.

The Recruitment module in Humanica Humatrix 7 1.0.0.203 and 1.0.0.681 allows an unauthenticated attacker to access all candidates' files in the photo folder on the website by specifying a "user id" parameter and file name, such as in a recruitment_online/upload/user/[user_id]/photo/[file_name] URI.

D-Link DSL-2875AL devices through 1.00.05 are prone to password disclosure via a simple crafted /romfile.cfg request to the web management server. This request doesn't require any authentication and will lead to saving the configuration file. The password is stored in cleartext.

Anviz access control devices expose credentials (names and passwords) by allowing remote attackers to query this information without credentials via port tcp/5010.

Anviz access control devices expose private Information (pin code and name) by allowing remote attackers to query this information without credentials via port tcp/5010.

Admin authentication can be bypassed with some specific invalid credentials, which allows logging in with an administrative privilege. Sharp Corporation states the telnet feature is implemented on older models only, and is planning to provide the firmware update to remove the feature. As for the details of affected product names, model numbers, and versions, refer to the information provided by the respective vendors listed under [References].

An issue was discovered in Archer Platform 6 before 2024.03. There is an X-Forwarded-For Header Bypass vulnerability. An unauthenticated attacker could potentially bypass intended whitelisting when X-Forwarded-For header is enabled.

A vulnerability was found in Apeman ID71 218.53.203.117. The impacted element is an unknown function of the file /onvif/device_service of the component ONVIF Service. Performing manipulation results in missing authentication. The attack is possible to be carried out remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way.

NetIQ iManager before 3.0.3 delivered a SSL private key in a Java application (JAR file) for authentication to Sentinel, allowing attackers to extract and establish their own connections to the Sentinel appliance.

It was found that dropbear before version 2013.59 with GSSAPI leaks whether given username is valid or invalid. When an invalid username is given, the GSSAPI authentication failure was incorrectly counted towards the maximum allowed number of password attempts.

Jupyter Scheduler is collection of extensions for programming jobs to run now or run on a schedule. The list of conda environments of `jupyter-scheduler` users maybe be exposed, potentially revealing information about projects that a specific user may be working on. This vulnerability has been patched in version(s) 1.1.6, 1.2.1, 1.8.2 and 2.5.2.

The webhook endpoint in Jenkins Git Plugin 4.11.3 and earlier provide unauthenticated attackers information about the existence of jobs configured to use an attacker-specified Git repository.

Screen SFT DAB 600/C firmware versions up to and including 1.9.3 contain an improper access control on the user management API allows unauthenticated requests to retrieve structured user data, including account names and connection metadata such as client IP and timeout values.

Some Dahua software products have a vulnerability of unauthenticated search for devices. After bypassing the firewall access control policy, by sending a specific crafted packet to the vulnerable interface, an attacker could unauthenticated search for devices in range of IPs from remote DSS Server.

Improper Authentication vulnerability in Melapress WP 2FA allows Authentication Bypass.This issue affects WP 2FA: from n/a through 2.2.0.

Improper authentication vulnerability in WordPress versions prior to 6.0.3 allows a remote unauthenticated attacker to obtain the email address of the user who posted a blog using the WordPress Post by Email Feature. The developer also provides new patched releases for all versions since 3.7.

The IBM Tivoli Storage Manager (IBM Spectrum Protect 7.1 and 8.1) default authentication protocol is vulnerable to a brute force attack due to disclosing too much information during authentication. An attacker could gain user or administrative access to the TSM server. IBM X-Force ID: 118750.

A vulnerability classified as problematic has been found in SourceCodester Book Store Management System 1.0. This affects an unknown part of the file /bsms_ci/index.php/user/edit_user/. The manipulation of the argument password leads to information disclosure. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-214587.

An issue was discovered affecting a backup feature where a crafted POST request returns the current configuration of the device in cleartext, including the administrator password. No authentication is required. Affected devices: Wavlink WN575A3, Wavlink WN579G3, Wavlink WN531A6, Wavlink WN535G3, Wavlink WN530H4, Wavlink WN57X93, Wavlink WN572HG3, Wavlink WN575A4, Wavlink WN578A2, Wavlink WN579G3, Wavlink WN579X3, and Jetstream AC3000/ERAC3000

A vulnerability has been identified in SIMATIC MV540 H (All versions < V3.3), SIMATIC MV540 S (All versions < V3.3), SIMATIC MV550 H (All versions < V3.3), SIMATIC MV550 S (All versions < V3.3), SIMATIC MV560 U (All versions < V3.3), SIMATIC MV560 X (All versions < V3.3). Affected devices do not perform authentication for several web API endpoints. This could allow an unauthenticated remote attacker to read and download data from the device.

VMware Workspace ONE Access and Identity Manager contain a broken authentication vulnerability. VMware has evaluated the severity of this issue to be in the Moderate severity range with a maximum CVSSv3 base score of 5.3.

Dataprobe iBoot-PDU FW versions prior to 1.42.06162022 contain a vulnerability where unauthenticated users could open PHP index pages without authentication and download the history file from the device; the history file includes the latest actions completed by specific users.

Grafana 8.4.3 allows unauthenticated access via (for example) a /dashboard/snapshot/*?orgId=0 URI. NOTE: the vendor considers this a UI bug, not a vulnerability