A vulnerability classified as problematic was found in Tenda FH451, FH1201, FH1202 and FH1206 up to 20241129. Affected by this vulnerability is the function websReadEvent of the file /goform/GetIPTV. The manipulation of the argument Content-Length leads to null pointer dereference. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.
A vulnerability was found in Tenda i9 1.0.0.8(3828) and classified as critical. This issue affects the function websReadEvent of the file /goform/GetIPTV. The manipulation leads to null pointer dereference. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.
An attacker who successfully exploited these vulnerabilities could cause the robot to stop, make the robot controller inaccessible. The vulnerability could potentially be exploited to perform unauthorized actions by an attacker. This vulnerability arises under specific condition when specially crafted message is processed by the system. Below are reported vulnerabilities in the Robot Ware versions. * IRC5- RobotWare 6 < 6.15.06 except 6.10.10, and 6.13.07 * OmniCore- RobotWare 7 < 7.14
A NULL pointer dereference vulnerability has been reported to affect Qsync Central. If a remote attacker gains a user account, they can then exploit the vulnerability to launch a denial-of-service (DoS) attack. We have already fixed the vulnerability in the following version: Qsync Central 5.0.0.4 ( 2026/01/20 ) and later
A NULL pointer dereference vulnerability has been reported to affect several product versions. If a remote attacker gains a user account, they can then exploit the vulnerability to launch a denial-of-service (DoS) attack. We have already fixed the vulnerability in the following version: File Station 5 5.5.6.5018 and later
A NULL pointer dereference vulnerability has been reported to affect Qsync Central. If a remote attacker gains a user account, they can then exploit the vulnerability to launch a denial-of-service (DoS) attack. We have already fixed the vulnerability in the following version: Qsync Central 5.0.0.2 ( 2025/07/31 ) and later
A NULL pointer dereference vulnerability has been reported to affect several QNAP operating system versions. If a remote attacker gains a user account, they can then exploit the vulnerability to launch a denial-of-service (DoS) attack. We have already fixed the vulnerability in the following versions: QTS 5.2.6.3195 build 20250715 and later QuTS hero h5.2.6.3195 build 20250715 and later
A flaw was found In 389-ds-base. When the Content Synchronization plugin is enabled, an authenticated user can reach a NULL pointer dereference using a specially crafted query. This flaw allows an authenticated attacker to cause a denial of service. This CVE is assigned against an incomplete fix of CVE-2021-3514.
3S-Smart CODESYS SP Realtime NT before V2.3.7.28, CODESYS Runtime Toolkit 32 bit full before V2.4.7.54, and CODESYS PLCWinNT before V2.4.7.54 allow a NULL pointer dereference.
A NULL pointer dereference vulnerability has been reported to affect Qsync Central. If a remote attacker gains a user account, they can then exploit the vulnerability to launch a denial-of-service (DoS) attack. We have already fixed the vulnerability in the following version: Qsync Central 5.0.0.1 ( 2025/07/09 ) and later
Consul and Consul Enterprise allowed an authenticated user with service:write permissions to trigger a workflow that causes Consul server and client agents to crash under certain circumstances. This vulnerability was fixed in Consul 1.14.5.
A NULL pointer dereference vulnerability has been reported to affect Qsync Central. If a remote attacker gains a user account, they can then exploit the vulnerability to launch a denial-of-service (DoS) attack. We have already fixed the vulnerability in the following version: Qsync Central 5.0.0.1 ( 2025/07/09 ) and later
A vulnerability was found in Tenda AC6, AC7, AC8, AC9, AC10, AC10U, AC15, AC18, AC500 and AC1206 up to 20241022. It has been rated as problematic. This issue affects the function websReadEvent of the file /goform/GetIPTV. The manipulation of the argument Content-Length leads to null pointer dereference. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used.
A NULL pointer dereference vulnerability has been reported to affect Qsync Central. If a remote attacker gains a user account, they can then exploit the vulnerability to launch a denial-of-service (DoS) attack. We have already fixed the vulnerability in the following version: Qsync Central 5.0.0.1 ( 2025/07/09 ) and later
A NULL pointer dereference vulnerability has been reported to affect Qsync Central. If a remote attacker gains a user account, they can then exploit the vulnerability to launch a denial-of-service (DoS) attack. We have already fixed the vulnerability in the following version: Qsync Central 5.0.0.1 ( 2025/07/09 ) and later
A flaw was found in the Linux kernel's NVMe driver. This issue may allow an unauthenticated malicious actor to send a set of crafted TCP packages when using NVMe over TCP, leading the NVMe driver to a NULL pointer dereference in the NVMe driver, causing kernel panic and a denial of service.
In the __d2b function of the newlib libc library, all versions prior to 3.3.0 (see newlib/libc/stdlib/mprec.c), Balloc is used to allocate a big integer, however no check is performed to verify if the allocation succeeded or not. Accessing _x will trigger a null pointer dereference bug in case of a memory allocation failure.
A flaw was found in the Linux kernel's NVMe driver. This issue may allow an unauthenticated malicious actor to send a set of crafted TCP packages when using NVMe over TCP, leading the NVMe driver to a NULL pointer dereference in the NVMe driver and causing kernel panic and a denial of service.
A flaw was found in the QEMU built-in VNC server while processing ClientCutText messages. The qemu_clipboard_request() function can be reached before vnc_server_cut_text_caps() was called and had the chance to initialize the clipboard peer, leading to a NULL pointer dereference. This could allow a malicious authenticated VNC client to crash QEMU and trigger a denial of service.
Incus is a system container and virtual machine manager. Prior to version 7.0.0, backup.GetInfo() trusts the inline backup/index.yaml config when present and only falls back to parsing the legacy backup/container/backup.yaml file if result.Config == nil. As a result, an archive can carry a valid inline config that passes the initial import preflight while also carrying a malformed legacy backup/container/backup.yaml file that is reparsed later from the restored file system. ParseConfigYamlFile() accepts YAML documents with no container section, and multiple downstream consumers then dereference. Container without checking for nil. Confirmed examples in the instance restore and import flow include backup.UpdateInstanceConfig() and internalImportFromBackup(). An authenticated user with permission to import instance backups may be able to crash the Incus daemon with a crafted backup archive whose inline backup/index.yaml is valid but whose extracted legacy backup.yaml omits container. The crash occurs in the restore path after archive extraction has begun. This issue has been patched in version 7.0.0.
In the __multiply function of the newlib libc library, all versions prior to 3.3.0 (see newlib/libc/stdlib/mprec.c), Balloc is used to allocate a big integer, however no check is performed to verify if the allocation succeeded or not. The access of _x[0] will trigger a null pointer dereference bug in case of a memory allocation failure.
In the __i2b function of the newlib libc library, all versions prior to 3.3.0 (see newlib/libc/stdlib/mprec.c), Balloc is used to allocate a big integer, however no check is performed to verify if the allocation succeeded or not. The access of _ x[0] will trigger a null pointer dereference bug in case of a memory allocation failure.
A NULL pointer dereference vulnerability has been reported to affect several QNAP operating system versions. If exploited, the vulnerability could allow users to launch a denial-of-service (DoS) attack via a network. We have already fixed the vulnerability in the following versions: QTS 5.1.6.2722 build 20240402 and later QuTS hero h5.1.6.2734 build 20240414 and later
The REENT_CHECK macro (see newlib/libc/include/sys/reent.h) as used by REENT_CHECK_TM, REENT_CHECK_MISC, REENT_CHECK_MP and other newlib macros in versions prior to 3.3.0, does not check for memory allocation problems when the DEBUG flag is unset (as is the case in production firmware builds).
A vulnerability in the web-based management interface of Cisco SPA100 Series Analog Telephone Adapters (ATAs) could allow an authenticated, remote attacker to cause a denial of service condition on an affected device. The vulnerability is due to improper validation of user-supplied requests to the web-based management interface. An attacker could exploit this vulnerability by sending a crafted request to the web-based management interface of an affected device. A successful exploit could allow the attacker to cause the device to stop responding, requiring manual intervention for recovery.
In the __multadd function of the newlib libc library, prior to versions 3.3.0 (see newlib/libc/stdlib/mprec.c), Balloc is used to allocate a big integer, however no check is performed to verify if the allocation succeeded or not. This will trigger a null pointer dereference bug in case of a memory allocation failure.
In Eclipse Mosquitto version 2.0.0 to 2.0.9, if an authenticated client that had connected with MQTT v5 sent a crafted CONNACK message to the broker, a NULL pointer dereference would occur.
Envoy is a high-performance edge/middle/service proxy. In 1.33.12, 1.34.10, 1.35.6, 1.36.2, and earlier, Envoy crashes when JWT authentication is configured with the remote JWKS fetching, allow_missing_or_failed is enabled, multiple JWT tokens are present in the request headers and the JWKS fetch fails. This is caused by a re-entry bug in the JwksFetcherImpl. When the first token's JWKS fetch fails, onJwksError() callback triggers processing of the second token, which calls fetch() again on the same fetcher object. The original callback's reset() then clears the second fetch's state (receiver_ and request_) which causes a crash when the async HTTP response arrives.
3S-Smart Software Solutions GmbH CODESYS V3 OPC UA Server, all versions 3.5.11.0 to 3.5.15.0, allows an attacker to send crafted requests from a trusted OPC UA client that cause a NULL pointer dereference, which may trigger a denial-of-service condition.
MariaDB Server before 10.3.34 thru 10.9.3 is vulnerable to Denial of Service. It is possible for function spider_db_mbase::print_warnings to dereference a null pointer.
Nullptr dereference when a null char is present in a proto symbol. The symbol is parsed incorrectly, leading to an unchecked call into the proto file's name during generation of the resulting error message. Since the symbol is incorrectly parsed, the file is nullptr. We recommend upgrading to version 3.15.0 or greater.
A null pointer dereference in Fortinet FortiOS before 7.2.5 and before 7.0.11, FortiProxy before 7.2.3 and before 7.0.9 allows attacker to denial of sslvpn service via specifically crafted request in network parameter.
An issue was discovered in OpenNDS Captive Portal before version 10.1.2. It has a NULL pointer dereference in preauthenticated() that can be triggered with a crafted GET HTTP request with a missing redirect query string parameter. Triggering this issue results in crashing OpenNDS (a Denial-of-Service condition). Affected OpenNDS Captive Portal before version 10.1.2 fixed infixed in OpenWrt master, OpenWrt 23.05 and OpenWrt 22.03 on28. August 2023 by updating OpenNDS to version 10.1.3.
An issue was discovered in Libreswan 3.x and 4.x before 4.12. When an IKEv1 ISAKMP SA Informational Exchange packet contains a Delete/Notify payload followed by further Notifies that act on the ISAKMP SA, such as a duplicated Delete/Notify message, a NULL pointer dereference on the deleted state causes the pluto daemon to crash and restart.
A null pointer dereference in Fortinet FortiOS before 7.2.5, before 7.0.11 and before 6.4.13, FortiProxy before 7.2.4 and before 7.0.10 allows attacker to denial of sslvpn service via specifically crafted request in bookmark parameter.
A CWE-476: NULL Pointer Dereference vulnerability that could cause a Denial of Service on the Modicon PLC controller / simulator when updating the controller application with a specially crafted project file exists in Modicon M580 CPU (part numbers BMEP* and BMEH*, all versions), Modicon M340 CPU (part numbers BMXP34*, all versions), Modicon MC80 (part numbers BMKC80*, all versions), Modicon Momentum Ethernet CPU (part numbers 171CBU*, all versions), PLC Simulator for EcoStruxureª Control Expert, including all Unity Pro versions (former name of EcoStruxureª Control Expert, all versions), PLC Simulator for EcoStruxureª Process Expert including all HDCS versions (former name of EcoStruxureª Process Expert, all versions), Modicon Quantum CPU (part numbers 140CPU*, all versions), Modicon Premium CPU (part numbers TSXP5*, all versions).
Null pointer dereference in some Zoom Workplace Apps for Windows may allow an authenticated user to conduct a denial of service via network access.
NULL pointer dereference in some Zoom Workplace Apps for Windows may allow an authenticated user to conduct a denial of service via network access.
In the __lshift function of the newlib libc library, all versions prior to 3.3.0 (see newlib/libc/stdlib/mprec.c), Balloc is used to allocate a big integer, however no check is performed to verify if the allocation succeeded or not. The access to b1 will trigger a null pointer dereference bug in case of a memory allocation failure.
NULL pointer dereference in some Zoom Workplace Apps for Windows may allow an authenticated user to conduct a denial of service via network access.
A null pointer dereference in Fortinet FortiOS version 7.2.0 through 7.2.4, 7.0.0 through 7.0.11, 6.4.0 through 6.4.12, Fortiproxy version 7.2.0 through 7.2.4, 7.0.0 through 7.0.10 allows attacker to denial of service via specially crafted HTTP requests.
VMware ESXi (6.7 before ESXi670-201806401-BG, 6.5 before ESXi650-201806401-BG, 6.0 before ESXi600-201806401-BG and 5.5 before ESXi550-201806401-BG), Workstation (14.x before 14.1.2), and Fusion (10.x before 10.1.2) contain a denial-of-service vulnerability due to NULL pointer dereference issue in RPC handler. Successful exploitation of this issue may allow attackers with normal user privileges to crash their VMs.
A NULL pointer dereference vulnerability has been reported to affect File Station 5. If a remote attacker gains a user account, they can then exploit the vulnerability to launch a denial-of-service (DoS) attack. We have already fixed the vulnerability in the following version: File Station 5 5.5.6.4907 and later
A NULL pointer dereference vulnerability has been reported to affect Qsync Central. If a remote attacker gains a user account, they can then exploit the vulnerability to launch a denial-of-service (DoS) attack. We have already fixed the vulnerability in the following version: Qsync Central 5.0.0.0 ( 2025/06/13 ) and later
A NULL pointer dereference vulnerability has been reported to affect Qsync Central. If a remote attacker gains a user account, they can then exploit the vulnerability to launch a denial-of-service (DoS) attack. We have already fixed the vulnerability in the following version: Qsync Central 5.0.0.4 ( 2026/01/20 ) and later
A NULL pointer dereference vulnerability has been reported to affect File Station 5. If a remote attacker gains a user account, they can then exploit the vulnerability to launch a denial-of-service (DoS) attack. We have already fixed the vulnerability in the following version: File Station 5 5.5.6.4907 and later
A NULL pointer dereference vulnerability has been reported to affect File Station 5. If a remote attacker gains a user account, they can then exploit the vulnerability to launch a denial-of-service (DoS) attack. We have already fixed the vulnerability in the following version: File Station 5 5.5.6.4907 and later
A NULL pointer dereference vulnerability has been reported to affect File Station 5. If a remote attacker gains a user account, they can then exploit the vulnerability to launch a denial-of-service (DoS) attack. We have already fixed the vulnerability in the following version: File Station 5 5.5.6.4907 and later
A NULL pointer dereference vulnerability has been reported to affect File Station 5. If a remote attacker gains a user account, they can then exploit the vulnerability to launch a denial-of-service (DoS) attack. We have already fixed the vulnerability in the following version: File Station 5 5.5.6.4933 and later
A NULL pointer dereference vulnerability has been reported to affect File Station 5. If a remote attacker gains a user account, they can then exploit the vulnerability to launch a denial-of-service (DoS) attack. We have already fixed the vulnerability in the following version: File Station 5 5.5.6.4907 and later