Certain NETGEAR devices are affected by command injection by an authenticated user. This affects R6400 before 1.0.1.50, R7900P before 1.4.1.50, R8000P before 1.4.1.50, RAX75 before 1.0.1.62, and RAX80 before 1.0.1.62.

D-Link DIR-853 A1 FW1.20B07 was discovered to contain a command injection vulnerability in the SetVirtualServerSettings module.

Zoho ManageEngine ADManager Plus through 7151 allows authenticated admin users to execute the commands in proxy settings.

A weakness has been identified in EFM ipTIME C200 up to 1.092. This vulnerability affects the function sub_408F90 of the file /cgi/iux_set.cgi of the component ApplyRestore Endpoint. This manipulation of the argument RestoreFile causes command injection. The attack can be initiated remotely. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.

A critical remote code execution (RCE) vulnerability exists in the web-based management interface of GatesAir Maxiva UAXT, VAXT transmitters when debugging mode is enabled. An attacker with a valid session ID (sess_id) can send specially crafted POST requests to the /json endpoint, enabling arbitrary command execution on the underlying system. This vulnerability can lead to full system compromise, including unauthorized access, privilege escalation, and potentially full device takeover.

A vulnerability has been found in Tenda AC6 2.0/15.03.06.23. The affected element is an unknown function of the file /goform/telnet of the component httpd. The manipulation of the argument lan.ip leads to os command injection. Remote exploitation of the attack is possible. The exploit has been disclosed to the public and may be used.

A security vulnerability has been detected in Tenda AC6 15.03.06.23. Affected by this issue is the function get_log_file of the file /goform/getLogFile of the component httpd. The manipulation of the argument wans.flag leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed publicly and may be used.

A vulnerability was identified in D-Link DNS-320 2.06B01. The impacted element is the function cgi_speed/cgi_dhcpd_lease/cgi_ddns/cgi_set_ip/cgi_upnp_del/cgi_dhcpd/cgi_upnp_add/cgi_upnp_edit of the file /cgi-bin/network_mgr.cgi. The manipulation leads to os command injection. The attack is possible to be carried out remotely. The exploit is publicly available and might be used.

A security flaw has been discovered in D-Link DNS-320 2.06B01. This affects the function delete/rename/copy/move/chmod/chown of the file /cgi-bin/webfile_mgr.cgi. The manipulation results in os command injection. The attack may be performed from remote. The exploit has been released to the public and may be used for attacks.

A weakness has been identified in D-Link DNS-320 2.06B01. This impacts the function cgi_set_host/cgi_set_ntp/cgi_fan_control/cgi_merge_user of the file /cgi-bin/system_mgr.cgi. This manipulation causes os command injection. It is possible to initiate the attack remotely.

Authenticated command injection vulnerability in the command line interface of a network management service. Successful exploitation of this vulnerability could allow an attacker to execute arbitrary commands as a privileged user on the underlying operating system.

An administrative user with access to configure webhooks can execute arbitrary commands by configuring and then triggering webhooks containing specific FreeMarker template syntax.  This issue affects all MongoDB Ops Manager 7.0 versions and MongoDB Ops Manager versions 8.0.22 and prior.

A vulnerability was found in Wavlink WL-WN530H4 20220721. This vulnerability affects the function strcat/snprintf of the file /cgi-bin/internet.cgi. The manipulation results in os command injection. It is possible to launch the attack remotely. The exploit has been made public and could be used. Upgrading to version 2026.04.16 is able to resolve this issue. Upgrading the affected component is recommended.

A vulnerability was identified in Linksys MR9600 2.0.6.206937. This affects the function BTRequestGetSmartConnectStatus of the file /etc/init.d/run_central2.sh of the component JNAP Action Handler. The manipulation of the argument pin leads to os command injection. The attack may be initiated remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability in the web-based management interface of Cisco AsyncOS Software for Cisco Secure Email Gateway and Cisco Secure Web Appliance could allow an authenticated, remote attacker to perform command injection attacks against an affected device. The attacker must authenticate with valid administrator credentials. This vulnerability is due to insufficient validation of XML configuration files by an affected device. An attacker could exploit this vulnerability by uploading a crafted XML configuration file. A successful exploit could allow the attacker to inject commands to the underlying operating system with root privileges.

A vulnerability was found in D-Link DIR-882 1.01B02. Impacted is the function sprintf of the file prog.cgi of the component HNAP1 SetNetworkSettings Handler. The manipulation of the argument IPAddress results in os command injection. The attack may be performed from remote. The exploit has been made public and could be used. This vulnerability only affects products that are no longer supported by the maintainer.

In versions 16.1.x before 16.1.3.1, 15.1.x before 15.1.6.1, 14.1.x before 14.1.5.1, and 13.1.x before 13.1.5.1, When the Advanced WAF / ASM module is provisioned, an authenticated remote code execution vulnerability exists in the BIG-IP iControl REST interface.

AP Manager in Innovaphone before 13r2 Service Release 17 allows command injection via a modified service ID during app upload.

A flaw has been found in TRENDnet TEW-811DRU 1.0.2.0. This affects the function setDeviceURL  of the file uapply.cgi of the component httpd . This manipulation of the argument DeviceURL causes os command injection. The attack can be initiated remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Multiple authenticated command injection vulnerabilities exist in the command line interface. Successful exploitation of these vulnerabilities result in the ability to execute arbitrary commands as a privileged user on the underlying operating system.

A security vulnerability has been detected in Tenda G103 1.0.0.5. The affected element is the function action_set_system_settings of the file system.lua of the component Setting Handler. Such manipulation of the argument lanIp leads to command injection. The attack may be performed from remote. The exploit has been disclosed publicly and may be used.

A security vulnerability has been detected in UGREEN DH2100+ up to 5.3.0.251125. This impacts the function handler_file_backup_create of the file /v1/file/backup/create of the component nas_svr. The manipulation of the argument path leads to command injection. The attack is possible to be carried out remotely. The exploit has been disclosed publicly and may be used. Upgrading the affected component is advised.

A vulnerability was detected in D-Link DIR-605 202WWB03. Affected by this issue is some unknown functionality of the component Firmware Update Service. Performing manipulation results in command injection. The attack can be initiated remotely. The exploit is now public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A security vulnerability has been detected in Edimax BR-6478AC V3 1.0.15. This issue affects the function sub_416898 of the file /boafrm/formDebugDiagnosticRun. The manipulation of the argument host leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Zoho ManageEngine ServiceDesk Plus versions 13010 and prior are vulnerable to authenticated command injection. This can be exploited by high-privileged users.

A weakness has been identified in D-Link DI-7100G C1 up to 20250928. Affected by this vulnerability is the function sub_46409C of the file /msp_info.htm?flag=qos of the component jhttpd. This manipulation of the argument iface causes command injection. The attack is possible to be carried out remotely. The exploit has been made available to the public and could be exploited.

MyBB is a free and open source forum software. The _Mail Settings_ → Additional Parameters for PHP's mail() function mail_parameters setting value, in connection with the configured mail program's options and behavior, may allow access to sensitive information and Remote Code Execution (RCE). The vulnerable module requires Admin CP access with the `_Can manage settings?_` permission and may depend on configured file permissions. MyBB 1.8.31 resolves this issue with the commit `0cd318136a`. Users are advised to upgrade. There are no known workarounds for this vulnerability.

Vulnerabilities in the ClearPass Policy Manager web-based management interface allow remote authenticated users to run arbitrary commands on the underlying host. A successful exploit could allow an attacker to execute arbitrary commands as root on the underlying operating system leading to complete system compromise in Aruba ClearPass Policy Manager version(s): 6.10.x: 6.10.6 and below; 6.9.x: 6.9.11 and below. Aruba has released upgrades for Aruba ClearPass Policy Manager that address these security vulnerabilities.

A vulnerability was found in IdeaCMS up to 1.8. The impacted element is an unknown function of the file app/common/logic/admin/Config.php of the component Website Name Handler. Performing manipulation of the argument 网站名称 results in command injection. The attack may be initiated remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way.

A remote command injection issues exists in the web server of the Kratos SpectralNet device with SpectralNet Narrowband (NB) before 1.7.5. As an admin user, an attacker can send a crafted password in order to execute Linux commands as the root user.

A security vulnerability has been detected in Wavlink WL-NU516U1 240425. This vulnerability affects the function sub_4012A0 of the file /cgi-bin/login.cgi. Such manipulation of the argument ipaddr leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Vulnerabilities in the ClearPass Policy Manager web-based management interface allow remote authenticated users to run arbitrary commands on the underlying host. A successful exploit could allow an attacker to execute arbitrary commands as root on the underlying operating system leading to complete system compromise in Aruba ClearPass Policy Manager version(s): 6.10.x: 6.10.6 and below; 6.9.x: 6.9.11 and below. Aruba has released upgrades for Aruba ClearPass Policy Manager that address these security vulnerabilities.

Vulnerabilities in the ClearPass Policy Manager web-based management interface allow remote authenticated users to run arbitrary commands on the underlying host. A successful exploit could allow an attacker to execute arbitrary commands as root on the underlying operating system leading to complete system compromise in Aruba ClearPass Policy Manager version(s): 6.10.x: 6.10.6 and below; 6.9.x: 6.9.11 and below. Aruba has released upgrades for Aruba ClearPass Policy Manager that address these security vulnerabilities.

An authenticated command injection vulnerability exists in the Archer BE450 v1 and BE7200 v1 router that allows an administrator to execute arbitrary system commands through the web management interface. After successfully authenticating to the admin interface, an attacker can leverage the browser’s developer console by supplying a crafted input that is passed to backend system commands without adequate sanitization. Successful exploitation enables execution of arbitrary commands with elevated privileges on the device, which may allow the attacker to start unauthorized services, modify system configuration, or otherwise fully compromise the router’s operating environment.

A vulnerability, which was classified as critical, has been found in Tenda AC8, AC10 and AC18 16.03.10.20. Affected by this issue is some unknown functionality of the file /goform/telnet of the component HTTP Request Handler. The manipulation leads to command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

An OS command injection vulnerability in the admin web console of Ivanti CSA before version 5.0.2 allows a remote authenticated attacker with admin privileges to obtain remote code execution.

SolarWinds Platform was susceptible to Command Injection. This vulnerability allows a remote adversary with complete control over the SolarWinds database to execute arbitrary commands.

IBM Cloud Pak for Data 4.5 and 4.6 could allow a privileged user to upload malicious files of dangerous types that can be automatically processed within the product's environment. IBM X-Force ID: 232034.

The web interface of the Vertiv Avocent UMG-4000 version 4.2.1.19 is vulnerable to command injection because the application incorrectly neutralizes code syntax before executing. Since all commands within the web application are executed as root, this could allow a remote attacker authenticated with an administrator account to execute arbitrary commands as root.

Authenticated Remote Code Execution in Altalink, Versalink & WorkCentre Products.

A vulnerability has been found in Ruijie RG-UAC 1.0 and classified as critical. This vulnerability affects the function get_ip.addr_details of the file /view/vpn/autovpn/sxh_vpnlic.php of the component HTTP POST Request Handler. The manipulation of the argument indevice leads to command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. VDB-269482 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was identified in Comfast CF-E4 2.6.0.1. This impacts an unknown function of the file /cgi-bin/mbox-config?method=SET&section=ntp_timezone of the component HTTP POST Request Handler. Such manipulation of the argument timestr leads to command injection. The attack may be launched remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability has been identified in RUGGEDCOM ROX MX5000 (All versions < V2.17.0), RUGGEDCOM ROX MX5000RE (All versions < V2.17.0), RUGGEDCOM ROX RX1400 (All versions < V2.17.0), RUGGEDCOM ROX RX1500 (All versions < V2.17.0), RUGGEDCOM ROX RX1501 (All versions < V2.17.0), RUGGEDCOM ROX RX1510 (All versions < V2.17.0), RUGGEDCOM ROX RX1511 (All versions < V2.17.0), RUGGEDCOM ROX RX1512 (All versions < V2.17.0), RUGGEDCOM ROX RX1524 (All versions < V2.17.0), RUGGEDCOM ROX RX1536 (All versions < V2.17.0), RUGGEDCOM ROX RX5000 (All versions < V2.17.0). Due to the insufficient validation during the installation and load of certain configuration files of the affected device, an attacker could spawn a reverse shell and gain root access on the affected system.

A vulnerability was determined in UTT 进取 521G 3.1.1-190816. The impacted element is the function sub_446B18 of the file /goform/formPdbUpConfig. Executing a manipulation of the argument policyNames can lead to os command injection. It is possible to launch the attack remotely. The exploit has been publicly disclosed and may be utilized.

Multiple command injection vulnerabilities exist in the web interface of the 501 Wireless Client Bridge which could lead to authenticated remote command execution. Successful exploitation of these vulnerabilities result in the ability of an attacker to execute arbitrary commands as a privileged user on the underlying operating system. Exploitation requires administrative authentication credentials on the host system.

A command injection vulnerability has been reported to affect QHora. If exploited, the vulnerability could allow remote attackers who have gained administrator access to execute arbitrary commands. We have already fixed the vulnerability in the following version: QuRouter 2.4.6.028 and later

A vulnerability has been identified in RUGGEDCOM ROX MX5000 (All versions < 2.15.1), RUGGEDCOM ROX MX5000RE (All versions < 2.15.1), RUGGEDCOM ROX RX1400 (All versions < 2.15.1), RUGGEDCOM ROX RX1500 (All versions < 2.15.1), RUGGEDCOM ROX RX1501 (All versions < 2.15.1), RUGGEDCOM ROX RX1510 (All versions < 2.15.1), RUGGEDCOM ROX RX1511 (All versions < 2.15.1), RUGGEDCOM ROX RX1512 (All versions < 2.15.1), RUGGEDCOM ROX RX1524 (All versions < 2.15.1), RUGGEDCOM ROX RX1536 (All versions < 2.15.1), RUGGEDCOM ROX RX5000 (All versions < 2.15.1). Affected devices do not properly validate user input, making them susceptible to command injection. An attacker with access to either the shell or the web CLI with administrator privileges could access the underlying operating system as the root user.

A vulnerability was found in DCN DCME-320 up to 20260121. Impacted is the function apply_config of the file /function/system/basic/bridge_cfg.php of the component Web Management Backend. Performing a manipulation of the argument ip_list results in command injection. The attack is possible to be carried out remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way.

A security flaw has been discovered in D-Link DIR-823X 250416. This vulnerability affects unknown code of the file /goform/set_ac_server of the component Web Management Interface. The manipulation of the argument ac_server results in os command injection. The attack can be launched remotely. The exploit has been released to the public and may be used for attacks.

A vulnerability was found in Arris VAP2500 08.50. It has been rated as critical. Affected by this issue is some unknown functionality of the file /diag_s.php. The manipulation of the argument customer_info leads to command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-265832.