The issue was addressed with improved bounds checks. This issue is fixed in iOS 18.1 and iPadOS 18.1. An app may be able to corrupt coprocessor memory.

An Incorrect Initialization of Resource vulnerability in the Internal Device Manager (IDM) of Juniper Networks Junos OS on EX4000 models allows an unauthenticated, network-based attacker to cause a Denial-of-Service (DoS). On EX4000 models with 48 ports (EX4000-48T, EX4000-48P, EX4000-48MP) a high volume of traffic destined to the device will cause an FXPC crash and restart, which leads to a complete service outage until the device has automatically restarted. The following reboot reason can be seen in the output of 'show chassis routing-engine' and as a log message:   reason=0x4000002 reason_string=0x4000002:watchdog + panic with core dump This issue affects Junos OS on EX4000-48T, EX4000-48P and EX4000-48MP: * 24.4 versions before 24.4R2, * 25.2 versions before 25.2R1-S2, 25.2R2. This issue does not affect versions before 24.4R1 as the first Junos OS version for the EX4000 models was 24.4R1.

FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to 3.20.1, the URBDRC client does not perform bounds checking on server‑supplied MSUSB_INTERFACE_DESCRIPTOR values and uses them as indices in libusb_udev_complete_msconfig_setup, causing an out‑of‑bounds read. This vulnerability is fixed in 3.20.1.

Improper Validation of Array Index (CWE-129) in Packetbeat’s MongoDB protocol parser can allow an attacker to cause Overflow Buffers (CAPEC-100) through specially crafted network traffic. This requires an attacker to send a malformed payload to a monitored network interface where MongoDB protocol parsing is enabled.

A vulnerability in the boot process of Blurams Flare Camera version 24.1114.151.929 and earlier allows a physically proximate attacker to hijack the boot mechanism and gain a bootloader shell via the UART interface. This is achieved by inducing a read error from the SPI flash memory during the boot, by shorting a data pin of the IC to ground. An attacker can then dump the entire firmware, leading to the disclosure of sensitive information including cryptographic keys and user configurations.

A flaw was found in libsoup’s WebSocket frame processing when handling incoming messages. If a non-default configuration is used where the maximum incoming payload size is unset, the library may read memory outside the intended bounds. This can cause unintended memory exposure or a crash. Applications using libsoup’s WebSocket support with this configuration may be impacted.

Improper Validation of Array Index (CWE-129) exists in Metricbeat can allow an attacker to cause a Denial of Service through Input Data Manipulation (CAPEC-153) via specially crafted, malformed payloads sent to the Graphite server metricset or Zookeeper server metricset. Additionally, Improper Input Validation (CWE-20) exists in the Prometheus helper module that can allow an attacker to cause a Denial of Service through Input Data Manipulation (CAPEC-153) via specially crafted, malformed metric data.

Software installed and run as a non-privileged user may conduct improper GPU system calls to subvert GPU HW to write to arbitrary physical memory pages. Under certain circumstances this exploit could be used to corrupt data pages not allocated by the GPU driver but memory pages in use by the kernel and drivers running on the platform altering their behaviour. This attack can lead the GPU to perform write operations on restricted internal GPU buffers that can lead to a second order affect of corrupted arbitrary physical memory.

Memory safety bugs present in Firefox 146 and Thunderbird 146. Some of these bugs showed evidence of memory corruption and we presume that with enough effort some of these could have been exploited to run arbitrary code. This vulnerability affects Firefox < 147 and Thunderbird < 147.

Memory safety bugs present in Firefox ESR 140.6, Thunderbird ESR 140.6, Firefox 146 and Thunderbird 146. Some of these bugs showed evidence of memory corruption and we presume that with enough effort some of these could have been exploited to run arbitrary code. This vulnerability affects Firefox < 147, Firefox ESR < 140.7, Thunderbird < 147, and Thunderbird < 140.7.

Incorrect boundary conditions in the Graphics component. This vulnerability affects Firefox < 147, Firefox ESR < 115.32, Firefox ESR < 140.7, Thunderbird < 147, and Thunderbird < 140.7.

Sandbox escape due to incorrect boundary conditions in the Graphics component. This vulnerability affects Firefox < 147, Firefox ESR < 115.32, Firefox ESR < 140.7, Thunderbird < 147, and Thunderbird < 140.7.

Sandbox escape due to incorrect boundary conditions in the Graphics: CanvasWebGL component. This vulnerability affects Firefox < 147, Firefox ESR < 140.7, Thunderbird < 147, and Thunderbird < 140.7.

A vulnerability was found in AcademySoftwareFoundation OpenColorIO up to 2.5.0. This issue affects the function ConvertToRegularExpression of the file src/OpenColorIO/FileRules.cpp. Performing a manipulation results in out-of-bounds read. The attack needs to be approached locally. The exploit has been made public and could be used. The patch is named ebdbb75123c9d5f4643e041314e2bc988a13f20d. To fix this issue, it is recommended to deploy a patch. The fix was added to the 2.5.1 milestone.

A vulnerability was detected in UTT 进取 520W 1.7.7-180627. Affected by this issue is the function strcpy of the file /goform/formPictureUrl. The manipulation of the argument importpictureurl results in buffer overflow. It is possible to launch the attack remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A security vulnerability has been detected in UTT 进取 520W 1.7.7-180627. Affected by this vulnerability is the function strcpy of the file /goform/formConfigNoticeConfig. The manipulation of the argument timestart leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A weakness has been identified in UTT 进取 520W 1.7.7-180627. Affected is the function strcpy of the file /goform/APSecurity. Executing a manipulation of the argument wepkey1 can lead to buffer overflow. The attack may be performed from remote. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.

A security flaw has been discovered in UTT 进取 520W 1.7.7-180627. This impacts the function strcpy of the file /goform/ConfigWirelessBase. Performing a manipulation of the argument ssid results in buffer overflow. The attack is possible to be carried out remotely. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was identified in UTT 进取 520W 1.7.7-180627. This affects the function strcpy of the file /goform/formFireWall. Such manipulation of the argument GroupName leads to buffer overflow. The attack can be executed remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was determined in UTT 进取 520W 1.7.7-180627. The impacted element is the function strcpy of the file /goform/formConfigFastDirectionW. This manipulation of the argument ssid causes buffer overflow. Remote exploitation of the attack is possible. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was identified in quickjs-ng quickjs up to 0.11.0. This issue affects the function js_typed_array_sort of the file quickjs.c. The manipulation leads to heap-based buffer overflow. Remote exploitation of the attack is possible. The exploit is publicly available and might be used. The identifier of the patch is 53eefbcd695165a3bd8c584813b472cb4a69fbf5. To fix this issue, it is recommended to deploy a patch.

A vulnerability was determined in quickjs-ng quickjs up to 0.11.0. This vulnerability affects the function js_typed_array_constructor of the file quickjs.c. Executing a manipulation can lead to heap-based buffer overflow. The attack may be launched remotely. The exploit has been publicly disclosed and may be utilized. This patch is called c5d80831e51e48a83eab16ea867be87f091783c5. A patch should be applied to remediate this issue.

The issue was addressed with improved memory handling. This issue is fixed in tvOS 26.2, Safari 26.2, watchOS 26.2, visionOS 26.2, iOS 26.2 and iPadOS 26.2, macOS Tahoe 26.2. Processing maliciously crafted web content may lead to an unexpected process crash.

Memory corruption when accessing resources in kernel driver.

On affected platforms running Arista EOS with MACsec configuration, a specially crafted packet can cause the MACsec process to terminate unexpectedly. Continuous receipt of these packets with certain MACsec configurations can cause longer term disruption of dataplane traffic.

A weakness has been identified in Tenda AC23 16.03.07.52. This affects the function sscanf of the file /goform/PowerSaveSet. Executing a manipulation of the argument Time can lead to buffer overflow. The attack can be launched remotely. The exploit has been made available to the public and could be used for attacks.

A malicious actor with access to the adjacent network could overflow the UniFi Protect Application (Version 6.1.79 and earlier) discovery protocol causing it to restart. Affected Products: UniFi Protect Application (Version 6.1.79 and earlier). Mitigation: Update your UniFi Protect Application to Version 6.2.72 or later.

A vulnerability has been found in UTT 进取 520W 1.7.7-180627. This issue affects the function strcpy of the file /goform/ConfigAdvideo. The manipulation of the argument timestart leads to buffer overflow. The attack is possible to be carried out remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A flaw has been found in UTT 进取 520W 1.7.7-180627. This vulnerability affects the function strcpy of the file /goform/formTaskEdit. Executing a manipulation of the argument selDateType can lead to buffer overflow. The attack can be executed remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was detected in UTT 进取 520W 1.7.7-180627. This affects the function strcpy of the file /goform/formPptpClientConfig. Performing a manipulation of the argument EncryptionMode results in buffer overflow. Remote exploitation of the attack is possible. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A security vulnerability has been detected in UTT 进取 520W 1.7.7-180627. Affected by this issue is the function strcpy of the file /goform/formUser. Such manipulation of the argument passwd1 leads to buffer overflow. The attack may be launched remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A flaw has been found in UTT 进取 512W 1.7.7-171114. This affects the function strcpy of the file /goform/formFtpServerDirConfig. Executing a manipulation of the argument filename can lead to buffer overflow. The attack can be launched remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was detected in UTT 进取 512W 1.7.7-171114. Affected by this issue is the function strcpy of the file /goform/formFtpServerShareDirSelcet. Performing a manipulation of the argument oldfilename results in buffer overflow. The attack can be initiated remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A security vulnerability has been detected in UTT 进取 512W 1.7.7-171114. Affected by this vulnerability is the function strcpy of the file /goform/formConfigCliForEngineerOnly. Such manipulation of the argument addCommand leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A weakness has been identified in UTT 进取 512W 1.7.7-171114. Affected is the function strcpy of the file /goform/formRemoteControl. This manipulation of the argument Profile causes buffer overflow. It is possible to initiate the attack remotely. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was detected in wasm3 up to 0.5.0. Impacted is the function op_SetSlot_i32/op_CallIndirect of the file m3_exec.h. Performing a manipulation results in memory corruption. The attack needs to be approached locally. The exploit is now public and may be used. Unfortunately, the project has no active maintainer at the moment.

A security vulnerability has been detected in WebAssembly wabt up to 1.0.39. This issue affects the function wabt::Decompiler::VarName of the file /src/repro/wabt/bin/wasm-decompile of the component wasm-decompile. Such manipulation leads to out-of-bounds read. Local access is required to approach this attack. The exploit has been disclosed publicly and may be used. Unfortunately, the project has no active maintainer at the moment. In a reply to the issue report somebody recommended to the researcher to provide a PR himself.

A weakness has been identified in WebAssembly wabt up to 1.0.39. This vulnerability affects the function wabt::AST::InsertNode of the file /src/repro/wabt/bin/wasm-decompile of the component wasm-decompile. This manipulation causes memory corruption. It is possible to launch the attack on the local host. The exploit has been made available to the public and could be used for attacks. Unfortunately, the project has no active maintainer at the moment. In a reply to the issue report somebody recommended to the researcher to provide a PR himself.

FontForge SFD File Parsing Improper Validation of Array Index Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of FontForge. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the parsing of SFD files. The issue results from the lack of proper validation of user-supplied data, which can result in a write past the end of an allocated array. An attacker can leverage this vulnerability to execute code in the context of the current user. Was ZDI-CAN-28562.

FontForge SFD File Parsing Improper Validation of Array Index Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of FontForge. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the parsing of SFD files. The issue results from the lack of proper validation of user-supplied data, which can result in a write past the end of an allocated array. An attacker can leverage this vulnerability to execute code in the context of the current user. Was ZDI-CAN-28563.

A vulnerability has been found in Tenda AC20 up to 16.03.08.12. The impacted element is the function sscanf of the file /goform/PowerSaveSet. The manipulation of the argument powerSavingEn/time/powerSaveDelay/ledCloseType leads to buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was determined in Tenda W6-S 1.0.0.4(510). This impacts an unknown function of the file /bin/httpd of the component R7websSsecurityHandler. Executing a manipulation of the argument Cookie can lead to stack-based buffer overflow. The attack may be launched remotely. The exploit has been publicly disclosed and may be utilized.

A vulnerability has been found in Tenda M3 1.0.0.13(4903). The impacted element is an unknown function of the file /goform/exeCommand. Such manipulation of the argument cmdinput leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

A flaw has been found in Tenda M3 1.0.0.13(4903). The affected element is the function formSetRemoteDhcpForAp of the file /goform/setDhcpAP. This manipulation of the argument startip/endip/leasetime/gateway/dns1/dns2 causes stack-based buffer overflow. The attack can be initiated remotely. The exploit has been published and may be used.

A vulnerability was identified in gmg137 snap7-rs up to 153d3e8c16decd7271e2a5b2e3da4d6f68589424. Affected by this issue is the function snap7_rs::client::S7Client::download of the file client.rs. Such manipulation leads to heap-based buffer overflow. The attack can be executed remotely. The exploit is publicly available and might be used. This product implements a rolling release for ongoing delivery, which means version information for affected or updated releases is unavailable. The project was informed of the problem early through an issue report but has not responded yet.

A weakness has been identified in Tenda M3 1.0.0.13(4903). Impacted is the function formSetRemoteInternetLanInfo of the file /goform/setInternetLanInfo. This manipulation of the argument portIp/portMask/portGateWay/portDns/portSecDns causes heap-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been made available to the public and could be used for attacks.

A security flaw has been discovered in Tenda M3 1.0.0.13(4903). This issue affects the function formSetAdInfoDetails of the file /goform/setAdInfoDetail. The manipulation of the argument adName/smsPassword/smsAccount/weixinAccount/weixinName/smsSignature/adRedirectUrl/adCopyRight/smsContent/adItemUID results in heap-based buffer overflow. The attack may be performed from remote. The exploit has been released to the public and may be used for attacks.

A vulnerability was identified in Tenda M3 1.0.0.13(4903). This vulnerability affects the function formSetAdPushInfo of the file /goform/setAdPushInfo. The manipulation of the argument mac/terminal leads to stack-based buffer overflow. The attack is possible to be carried out remotely. The exploit is publicly available and might be used.

A vulnerability was determined in Tenda M3 1.0.0.13(4903). This affects the function formSetRemoteVlanInfo of the file /goform/setVlanInfo. Executing a manipulation of the argument ID/vlan/port can lead to stack-based buffer overflow. The attack can be executed remotely. The exploit has been publicly disclosed and may be utilized.

A vulnerability was found in Tenda M3 1.0.0.13(4903). Affected by this issue is the function formSetVlanPolicy of the file /goform/setVlanPolicyData. Performing a manipulation of the argument qvlan_truck_port results in heap-based buffer overflow. Remote exploitation of the attack is possible. The exploit has been made public and could be used.

A weakness has been identified in Tenda AC10U 15.03.06.48/15.03.06.49. Affected by this vulnerability is the function fromadvsetlanip of the file /goform/AdvSetLanip of the component POST Request Parameter Handler. Executing a manipulation of the argument lanMask can lead to buffer overflow. The attack can be launched remotely. The exploit has been made available to the public and could be used for attacks.