IBM Cognos Command Center 10.2.4.1 and 10.2.5 could allow a local user to execute arbitrary code on the system due to the use of unsafe use of the BinaryFormatter function.
Improper access control on the NetScaler Management Interface in NetScaler ADC and NetScaler Gateway when an attacker can get access to the appliance NSIP, Cluster Management IP or local GSLB Site IP or SNIP with Management Access
A vulnerability has been found in SourceCodester Human Resource Information System 1.0. Affected by this issue is some unknown functionality of the file /Superadmin_Dashboard/process/editemployee_process.php. Such manipulation of the argument employee_file201 leads to unrestricted upload. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.
A flaw has been found in SourceCodester Human Resource Information System 1.0. Affected by this vulnerability is an unknown functionality of the file /Admin_Dashboard/process/editemployee_process.php. This manipulation of the argument employee_file201 causes unrestricted upload. The attack may be initiated remotely. The exploit has been published and may be used.
A weakness has been identified in diyhi bbs up to 6.8. The impacted element is an unknown function of the file src/main/java/cms/web/action/filePackage/FilePackageManageAction.java of the component File Compression Handler. This manipulation of the argument idGroup causes information disclosure. Remote exploitation of the attack is possible. The exploit has been made available to the public and could be exploited.
Incorrect access control in the EEPROM component of Kapsch TrafficCom RIS-9160 & RIS-9260 Roadside Units (RSUs) v3.2.0.829.23, v3.8.0.1119.42, and v4.6.0.1211.28 allows attackers to replace password hashes stored in the EEPROM with hashes of their own, leading to the escalation of privileges to root.
Incorrect access control in the SPI Flash Chip of Kapsch TrafficCom RIS-9160 & RIS-9260 Roadside Units (RSUs) v3.2.0.829.23, v3.8.0.1119.42, and v4.6.0.1211.28 allows physically proximate attackers to arbitrarily modify SPI flash regions, leading to a degradation of the security posture of the device.
The TP-Link KP303 Smartplug can be issued unauthenticated protocol commands that may cause unintended power-off condition and potential information leak. This issue affects TP-Link KP303 (US) Smartplug: before 1.1.0.
A vulnerability was identified in GreenCMS up to 2.3.0603. This affects an unknown part of the file /index.php?m=admin&c=media&a=fileconnect. The manipulation of the argument upload[] leads to unrestricted upload. The attack is possible to be carried out remotely. The exploit is publicly available and might be used. This vulnerability only affects products that are no longer supported by the maintainer.
DataEase is an open source business intelligence and data visualization tool. Prior to version 2.10.12, because DB2 parameters are not filtered, a JNDI injection attack can be directly launched. JNDI triggers an AspectJWeaver deserialization attack, writing to various files. This vulnerability requires commons-collections 4.x and aspectjweaver-1.9.22.jar. The vulnerability has been fixed in version 2.10.12.
An authentication bypass vulnerability exists which allows an unauthenticated attacker to control administrator backup functions, leading to compromise of passwords, secrets, and application session tokens stored by the Unified PAM.
An out-of-bounds read vulnerability exists in the Nex parsing functionality of The Biosig Project libbiosig 3.9.0 and Master Branch (35a819fa). A specially crafted .nex file can lead to an information leak. An attacker can provide a malicious file to trigger this vulnerability.
Improper Handling of Length Parameter Inconsistency vulnerability in web server function on Mitsubishi Electric Corporation MELSEC iQ-F Series CPU module allows a remote unauthenticated attacker to delay the processing of the web server function and prevent legitimate users from utilizing the web server function, by sending a specially crafted HTTP request.
A weakness has been identified in xuhuisheng lemon up to 1.13.0. This affects the function uploadImage of the file CmsArticleController.java of the component com.mossle.cms.web.CmsArticleController.uploadImage. This manipulation of the argument Upload causes unrestricted upload. The attack can be initiated remotely. The exploit has been made available to the public and could be exploited.
A vulnerability has been found in HuangDou UTCMS 9. This vulnerability affects unknown code of the file app/modules/ut-frame/admin/login.php of the component Login. Such manipulation of the argument code leads to incorrect comparison. The attack can be executed remotely. The attack requires a high level of complexity. It is stated that the exploitability is difficult. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
A flaw has been found in YiFang CMS up to 2.0.5. This affects the function mergeMultipartUpload of the file app/utils/base/plugin/P_file.php. This manipulation of the argument File causes unrestricted upload. Remote exploitation of the attack is possible. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
Incorrect access control in the prehandle function of Rebuild v3.7.7 allows attackers to bypass authentication via a crafted GET request sent to /commons/ip-location.
An issue was discovered in getrebuild/rebuild 4.0.4. The affected source code class is com.rebuild.web.RebuildWebInterceptor, and the affected function is preHandle In the filter code, use CodecUtils.urlDecode(request.getRequestURI()) to obtain the URL-decoded request path, and then determine whether the path endsWith /error. If so, execute return true to skip this Interceptor. Else, redirect to /user/login api. Allowing unauthenticated attackers to gain sensitive information or escalated privileges.
Incorrect access control in the DELT_file.xgi endpoint of D-Link DSL-7740C with firmware DSL7740C.V6.TR069.20211230 allows attackers to modify arbitrary settings within the device's XML database, including the administrator’s password.
PerfreeBlog v4.0.11 has an arbitrary file read vulnerability in the getThemeFileContent function.
Incorrect access control in the Maintenance module of D-Link DSL-7740C with firmware DSL7740C.V6.TR069.20211230 allows authenticated attackers with low-level privileges to arbitrarily change the high-privileged account passwords and escalate privileges.
Incorrect access control in the component /cgi-bin/system_diagnostic_main.asp of DASAN GPON ONU H660WM H660WMR210825 allows attackers to access sensitive information.
Incorrect access control in the config.xgi function of D-Link DSL-7740C with firmware DSL7740C.V6.TR069.20211230 allows attackers to download the configuration file via providing a crafted web request.
Adminer 4.8.1, when using Monolog for logging, allows a Denial of Service (memory consumption) via a crafted serialized payload (e.g., using s:1000000000), leading to a PHP Object Injection issue. Remote, unauthenticated attackers can trigger this by sending a malicious serialized object, which forces excessive memory usage, rendering Adminer’s interface unresponsive and causing a server-level DoS. While the server may recover after several minutes, multiple simultaneous requests can cause a complete crash requiring manual intervention.
DASAN GPON ONU H660WM H660WMR210825 is susceptible to improper access control under its default settings. Attackers can exploit this vulnerability to gain unauthorized access to sensitive information and modify its configuration via the UPnP protocol WAN sides without any authentication.
A security vulnerability has been detected in YiFang CMS up to 2.0.5. Affected by this vulnerability is the function exportInstallTable of the file app/utils/base/database/Migrate.php. The manipulation leads to information disclosure. The attack may be initiated remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
A weakness has been identified in givanz Vvveb up to 1.0.7.2. Affected is an unknown function of the file /system/traits/media.php. Executing manipulation of the argument files[] can lead to unrestricted upload. The attack can be launched remotely. The exploit has been made available to the public and could be exploited. Applying a patch is advised to resolve this issue. The code maintainer explains, that "[he] fixed the code to remove this vulnerability and will make a new release".
A security flaw has been discovered in ckolivas lrzip up to 0.651. This impacts the function __GI_____strtol_l_internal of the file strtol_l.c. Performing manipulation results in null pointer dereference. The attack is only possible with local access. The exploit has been released to the public and may be exploited.
A vulnerability was detected in appneta tcpreplay up to 4.5.1. Impacted is the function tcpedit_post_args of the file /src/tcpedit/parse_args.c. The manipulation results in null pointer dereference. The attack is only possible with local access. The exploit is now public and may be used. Upgrading to version 4.5.2-beta2 is recommended to address this issue. Upgrading the affected component is advised. The vendor explains, that he was "[a]ble to reproduce in 6fcbf03 but not in 4.5.2-beta2".
A weakness has been identified in FNKvision Y215 CCTV Camera 10.194.120.40. This vulnerability affects unknown code of the file s1_rf_test_config of the component Telnet Sevice. Executing manipulation can lead to backdoor. The physical device can be targeted for the attack. This attack is characterized by high complexity. It is stated that the exploitability is difficult. The exploit has been made available to the public and could be exploited. The vendor was contacted early about this disclosure but did not respond in any way.
A security flaw has been discovered in FNKvision Y215 CCTV Camera 10.194.120.40. This affects an unknown part of the file /tmp/wpa_supplicant.conf. Performing manipulation results in information disclosure. The attack may be carried out on the physical device. The attack's complexity is rated as high. It is indicated that the exploitability is difficult. The exploit has been released to the public and may be exploited. The vendor was contacted early about this disclosure but did not respond in any way.
A vulnerability was determined in Belkin AX1800 1.1.00.016. Affected by this vulnerability is an unknown functionality of the component Firmware Update Handler. This manipulation causes insufficient verification of data authenticity. The attack can be initiated remotely. The vendor was contacted early about this disclosure but did not respond in any way.
UnoPim is an open-source Product Information Management (PIM) system built on the Laravel framework. In versions 0.3.0 and earlier, users without the Delete privilege for products are unable to delete individual products via the standard endpoint, as expected. However, these users can bypass intended access controls by issuing requests to the mass-delete endpoint, allowing them to delete products without proper authorization. This vulnerability allows unauthorized product deletion, leading to potential data loss and business disruption. The issue is fixed in version 0.3.1. No known workarounds exist.
WebITR developed by Uniong has a Missing Authentication vulnerability, allowing unauthenticated remote attackers to log into the system as arbitrary users by exploiting a specific functionality.
Post-authenticated external control of system web interface configuration setting vulnerability in Danfoss AK-SM8xxA Series prior to 4.3.1, which could allow for a denial of service attack induced by improper handling of exceptional conditions
Mahara 21.10 before 21.10.6, 22.04 before 22.04.4, and 22.10 before 22.10.1 deserializes user input unsafely during skin import. A particularly structured XML file could cause code execution when being processed.
Incorrect access control in the preHandle function of SpringBootBlog v1.0.0 allows attackers to access sensitive components without authentication.
Incorrect access control in the doFilter function of my-site v1.0.2.RELEASE allows attackers to access sensitive components without authentication.
Voltronic Power ViewPower through 1.04-21353 and PowerShield Netguard before 1.04-23292 allows a remote attacker to configure the system via an unspecified web interface. An unauthenticated remote attacker can make changes to the system including: changing the web interface admin password, view/change system configuration, enumerate connected UPS devices and shut down connected UPS devices. This extends to being able to configure operating system commands that should run if the system detects a connected UPS shutting down.
spimsimulator spim v9.1.24 and before is vulnerable to Buffer Overflow in READ_STRING_SYSCALL.
An issue was discovered in Shopizer 3.2.7. The server's CORS implementation reflects the client-supplied Origin header verbatim into Access-Control-Allow-Origin without any whitelist validation, while also enabling Access-Control-Allow-Credentials: true. This allows any malicious origin to make authenticated cross-origin requests and read sensitive responses.
OperaMasks SDK ELite Script Engine v0.5.0 was discovered to contain a deserialization vulnerability.
A discrepancy in the error message returned by the login function of Reolink Smart 2K+ Plug-in Wi-Fi Video Doorbell with Chime - firmware v3.0.0.4662_2503122283 when entering the wrong username and password allows attackers to enumerate existing accounts.
An Insecure Direct Object Reference (IDOR) vulnerability in Reolink Smart 2K+ Plug-in Wi-Fi Video Doorbell with Chime - firmware v3.0.0.4662_2503122283 allows unauthorized attackers to access the Admin-only settings and edit the session storage.
D-Link DCS-825L firmware version 1.08.01 and possibly prior versions contain an insecure implementation in the mydlink-watch-dog.sh script. The script monitors and respawns the `dcp` and `signalc` binaries without validating their integrity, origin, or permissions. An attacker with filesystem access (e.g., via UART or firmware modification) may replace these binaries to achieve persistent arbitrary code execution with root privileges. The issue stems from improper handling of executable trust and absence of integrity checks in the watchdog logic.
An Insecure Direct Object Reference (IDOR) vulnerability in Reolink v4.54.0.4.20250526 allows unauthorized attackers to access and download other users' profile photos via a crafted URL.
An issue was discovered in mouse07410 asn1c thru 0.9.29 (2025-03-20) - a fork of vlm asn1c. In UPER (Unaligned Packed Encoding Rules), asn1c-generated decoders fail to enforce INTEGER constraints when the bound is positive and exceeds 32 bits in length, potentially allowing incorrect or malicious input to be processed.
Reolink v4.54.0.4.20250526 was discovered to contain a task hijacking vulnerability due to inappropriate taskAffinity settings.
Improper access control in Azure Databricks allows an unauthorized attacker to elevate privileges over a network.
On N-central, it is possible for any authenticated user to read, write and modify syslog configuration across customers on an N-central server. This vulnerability is present in all deployments of N-central prior to 2025.2.