A security flaw has been discovered in Shenzhen Sixun Business Management System 7/11. This affects an unknown part of the file /Adm/OperatorStop. Performing manipulation results in improper authorization. The attack is possible to be carried out remotely. The exploit has been released to the public and may be exploited.

A security vulnerability has been detected in Portabilis i-Educar up to 2.10. The affected element is an unknown function of the file /intranet/educar_turma_tipo_cad.php. Such manipulation of the argument nm_tipo leads to cross site scripting. It is possible to launch the attack remotely. The exploit has been disclosed publicly and may be used.

A weakness has been identified in Portabilis i-Educar up to 2.10. Impacted is an unknown function of the file /intranet/educar_modulo_cad.php. This manipulation of the argument nm_tipo/descricao causes cross site scripting. It is possible to initiate the attack remotely. The exploit has been made available to the public and could be exploited.

A security flaw has been discovered in eCharge Hardy Barth Salia PLCC up to 2.3.81. This issue affects some unknown processing of the file /api.php. The manipulation of the argument setrfidlist results in unrestricted upload. The attack may be performed from remote. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was identified in MiczFlor RPi-Jukebox-RFID up to 2.8.0. This vulnerability affects unknown code of the file /htdocs/userScripts.php. The manipulation of the argument Custom script leads to cross site scripting. The attack is possible to be carried out remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was determined in MiczFlor RPi-Jukebox-RFID up to 2.8.0. This affects an unknown part of the file /htdocs/cardRegisterNew.php. Executing manipulation can lead to cross site scripting. The attack can be executed remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in MiczFlor RPi-Jukebox-RFID up to 2.8.0. Affected by this issue is some unknown functionality of the file /htdocs/manageFilesFolders.php. Performing manipulation results in cross site scripting. Remote exploitation of the attack is possible. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability has been found in MiczFlor RPi-Jukebox-RFID up to 2.8.0. Affected by this vulnerability is an unknown functionality of the file /htdocs/cardEdit.php. Such manipulation leads to cross site scripting. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A flaw has been found in MiczFlor RPi-Jukebox-RFID up to 2.8.0. Affected is an unknown function of the file /htdocs/inc.setWlanIpMail.php. This manipulation of the argument Email address causes cross site scripting. The attack may be initiated remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was detected in Wavlink WL-WN578W2 221110. This impacts the function sub_404DBC of the file /cgi-bin/wireless.cgi. The manipulation of the argument macAddr results in os command injection. The attack can be launched remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A security vulnerability has been detected in Wavlink WL-WN578W2 221110. This affects the function sub_404850 of the file /cgi-bin/wireless.cgi. The manipulation of the argument delete_list leads to os command injection. The attack can be initiated remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was determined in WhatCD Gazelle up to 63b337026d49b5cf63ce4be20fdabdc880112fa3. The affected element is an unknown function of the file /sections/tools/managers/change_log.php of the component Commit Message Handler. Executing manipulation of the argument Message can lead to cross site scripting. The attack may be performed from remote. The exploit has been publicly disclosed and may be utilized. This product utilizes a rolling release system for continuous delivery, and as such, version information for affected or updated releases is not disclosed.

A vulnerability was found in cdevroe unmark up to 1.9.3. Impacted is an unknown function of the file application/views/marks/info.php. Performing manipulation of the argument Title results in cross site scripting. The attack is possible to be carried out remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability has been found in cdevroe unmark up to 1.9.3. This issue affects some unknown processing of the file /application/controllers/Marks.php. Such manipulation of the argument Title leads to cross site scripting. The attack can be executed remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A flaw has been found in cdevroe unmark up to 1.9.3. This vulnerability affects unknown code of the file application/views/layouts/topbar/searchform.php. This manipulation of the argument q causes cross site scripting. Remote exploitation of the attack is possible. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was detected in cdevroe unmark up to 1.9.3. This affects an unknown part of the file /application/controllers/Marks.php. The manipulation of the argument url results in server-side request forgery. The attack may be launched remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A security vulnerability has been detected in MiczFlor RPi-Jukebox-RFID up to 2.8.0. Affected by this issue is some unknown functionality of the file /htdocs/api/playlist/playsinglefile.php. The manipulation of the argument File leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

The The Hack Repair Guy's Plugin Archiver plugin for WordPress is vulnerable to arbitrary file deletion due to insufficient file path validation in the prepare_items function in all versions up to, and including, 2.0.4. This makes it possible for authenticated attackers, with Administrator-level access and above, to delete arbitrary files on the server, which can easily lead to remote code execution when the right file is deleted (such as wp-config.php).

A weakness has been identified in MiczFlor RPi-Jukebox-RFID up to 2.8.0. Affected by this vulnerability is an unknown functionality of the file /htdocs/api/playlist/shuffle.php. Executing manipulation of the argument playlist can lead to os command injection. The attack can be launched remotely. The exploit has been made available to the public and could be exploited. The vendor was contacted early about this disclosure but did not respond in any way.

A security flaw has been discovered in MiczFlor RPi-Jukebox-RFID up to 2.8.0. Affected is an unknown function of the file /htdocs/api/playlist/single.php. Performing manipulation of the argument playlist results in os command injection. The attack can be initiated remotely. The exploit has been released to the public and may be exploited. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was identified in Wavlink WL-WN578W2 221110. This impacts the function sub_401340/sub_401BA4 of the file /cgi-bin/login.cgi. Such manipulation of the argument ipaddr leads to command injection. It is possible to launch the attack remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.

Open redirect vulnerability in the System Settings in Liferay Portal 7.1.0 through 7.4.3.101, and Liferay DXP 2023.Q3.1 through 2023.Q3.4 , 7.4 GA through update 92, 7.3 GA through update 35, and older unsupported versions allows remote attackers to redirect users to arbitrary external URLs via the _com_liferay_configuration_admin_web_portlet_SystemSettingsPortlet_redirect parameter. Open redirect vulnerability in the Instance Settings in Liferay Portal 7.1.0 through 7.4.3.101, and Liferay DXP 2023.Q3.1 through 2023.Q3.4 , 7.4 GA through update 92, 7.3 GA through update 35, and older unsupported versions allows remote attackers to redirect users to arbitrary external URLs via the _com_liferay_configuration_admin_web_portlet_InstanceSettingsPortlet_redirect parameter. Open redirect vulnerability in the Site Settings in Liferay Portal 7.1.0 through 7.4.3.101, and Liferay DXP 2023.Q3.1 through 2023.Q3.4 , 7.4 GA through update 92, 7.3 GA through update 35, and older unsupported versions allows remote attackers to redirect users to arbitrary external URLs via the _com_liferay_site_admin_web_portlet_SiteSettingsPortlet_redirect parameter.

A vulnerability was determined in Wavlink WL-WN578W2 221110. This affects the function sub_401C5C of the file firewall.cgi. This manipulation of the argument pingFrmWANFilterEnabled/blockSynFloodEnabled/blockPortScanEnabled/remoteManagementEnabled causes command injection. It is possible to initiate the attack remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way.

Liferay Portal 7.4.0 through 7.4.3.101, and Liferay DXP 2023.Q3.0 through 2023.Q3.4, 7.4 GA through update 92 and 7.3 GA though update 35 does not limit the number of objects returned from a GraphQL queries, which allows remote attackers to perform denial-of-service (DoS) attacks on the application by executing queries that return a large number of objects.

A vulnerability was found in Wavlink WL-WN578W2 221110. The impacted element is the function sub_409184 of the file /wizard_rep.shtml. The manipulation of the argument sel_EncrypTyp results in command injection. The attack may be performed from remote. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability has been found in Wavlink WL-WN578W2 221110. The affected element is an unknown function of the file /sysinit.html. The manipulation of the argument newpass/confpass leads to weak password recovery. The attack is possible to be carried out remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Flowise is a drag & drop user interface to build a customized large language model flow. In version 3.0.5 and earlier, the `forgot-password` endpoint in Flowise returns sensitive information including a valid password reset `tempToken` without authentication or verification. This enables any attacker to generate a reset token for arbitrary users and directly reset their password, leading to a complete account takeover (ATO). This vulnerability applies to both the cloud service (`cloud.flowiseai.com`) and self-hosted/local Flowise deployments that expose the same API. Commit 9e178d68873eb876073846433a596590d3d9c863 in version 3.0.6 secures password reset endpoints. Several recommended remediation steps are available. Do not return reset tokens or sensitive account details in API responses. Tokens must only be delivered securely via the registered email channel. Ensure `forgot-password` responds with a generic success message regardless of input, to avoid user enumeration. Require strong validation of the `tempToken` (e.g., single-use, short expiry, tied to request origin, validated against email delivery). Apply the same fixes to both cloud and self-hosted/local deployments. Log and monitor password reset requests for suspicious activity. Consider multi-factor verification for sensitive accounts.

A flaw has been found in Wavlink WL-WN578W2 221110. Impacted is an unknown function of the file /live_online.shtml. Executing manipulation can lead to information disclosure. The attack can be executed remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A problem with the Palo Alto Networks Cortex XDR Microsoft 365 Defender Pack can result in exposure of user credentials in application logs. Normally, these application logs are only viewable by local users and are included when generating logs for troubleshooting purposes. This means that these credentials are exposed to recipients of the application logs.

An information exposure vulnerability in the Palo Alto Networks User-ID Credential Agent (Windows-based) can expose the service account password under specific non-default configurations. This allows an unprivileged Domain User to escalate privileges by exploiting the account’s permissions. The impact varies by configuration: * Minimally Privileged Accounts: Enable disruption of User-ID Credential Agent operations (e.g., uninstalling or disabling the agent service), weakening network security policies that leverage Credential Phishing Prevention https://docs.paloaltonetworks.com/advanced-url-filtering/administration/url-filtering-features/credential-phishing-prevention under a Domain Credential Filter https://docs.paloaltonetworks.com/advanced-url-filtering/administration/url-filtering-features/credential-phishing-prevention/methods-to-check-for-corporate-credential-submissions configuration. * Elevated Accounts (Server Operator, Domain Join, Legacy Features): Permit increased impacts, including server control (e.g., shutdown/restart), domain manipulation (e.g., rogue computer objects), and network compromise via reconnaissance or client probing.

A Stored cross-site scripting vulnerability in the Liferay Portal 7.4.0 through 7.4.3.132, and Liferay DXP 2025.Q3.0, 2025.Q2.0 through 2025.Q2.12, 2025.Q1.0 through 2025.Q1.17, 2024.Q4.0 through 2024.Q4.7, 2024.Q3.0 through 2024.Q3.13, 2024.Q2.0 through 2024.Q2.13 and 2024.Q1.1 through 2024.Q1.20 allows an remote authenticated attacker to inject JavaScript through the organization site names. The malicious payload is stored and executed without proper sanitization or escaping.

A vulnerability was detected in iteachyou Dreamer CMS up to 4.1.3.2. This issue affects some unknown processing of the file /admin/user/updatePwd. Performing manipulation results in weak password requirements. Remote exploitation of the attack is possible. A high degree of complexity is needed for the attack. The exploitability is assessed as difficult. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

This CVE ID has been rejected or withdrawn by its CVE Numbering Authority.

In the Linux kernel, the following vulnerability has been resolved: NFS: Fix the setting of capabilities when automounting a new filesystem Capabilities cannot be inherited when we cross into a new filesystem. They need to be reset to the minimal defaults, and then probed for again.

In the Linux kernel, the following vulnerability has been resolved: xfrm: Duplicate SPI Handling The issue originates when Strongswan initiates an XFRM_MSG_ALLOCSPI Netlink message, which triggers the kernel function xfrm_alloc_spi(). This function is expected to ensure uniqueness of the Security Parameter Index (SPI) for inbound Security Associations (SAs). However, it can return success even when the requested SPI is already in use, leading to duplicate SPIs assigned to multiple inbound SAs, differentiated only by their destination addresses. This behavior causes inconsistencies during SPI lookups for inbound packets. Since the lookup may return an arbitrary SA among those with the same SPI, packet processing can fail, resulting in packet drops. According to RFC 4301 section 4.4.2 , for inbound processing a unicast SA is uniquely identified by the SPI and optionally protocol. Reproducing the Issue Reliably: To consistently reproduce the problem, restrict the available SPI range in charon.conf : spi_min = 0x10000000 spi_max = 0x10000002 This limits the system to only 2 usable SPI values. Next, create more than 2 Child SA. each using unique pair of src/dst address. As soon as the 3rd Child SA is initiated, it will be assigned a duplicate SPI, since the SPI pool is already exhausted. With a narrow SPI range, the issue is consistently reproducible. With a broader/default range, it becomes rare and unpredictable. Current implementation: xfrm_spi_hash() lookup function computes hash using daddr, proto, and family. So if two SAs have the same SPI but different destination addresses, then they will: a. Hash into different buckets b. Be stored in different linked lists (byspi + h) c. Not be seen in the same hlist_for_each_entry_rcu() iteration. As a result, the lookup will result in NULL and kernel allows that Duplicate SPI Proposed Change: xfrm_state_lookup_spi_proto() does a truly global search - across all states, regardless of hash bucket and matches SPI and proto.

In the Linux kernel, the following vulnerability has been resolved: net: lapbether: ignore ops-locked netdevs Syzkaller managed to trigger lock dependency in xsk_notify via register_netdevice. As discussed in [0], using register_netdevice in the notifiers is problematic so skip adding lapbeth for ops-locked devices. xsk_notifier+0xa4/0x280 net/xdp/xsk.c:1645 notifier_call_chain+0xbc/0x410 kernel/notifier.c:85 call_netdevice_notifiers_info+0xbe/0x140 net/core/dev.c:2230 call_netdevice_notifiers_extack net/core/dev.c:2268 [inline] call_netdevice_notifiers net/core/dev.c:2282 [inline] unregister_netdevice_many_notify+0xf9d/0x2700 net/core/dev.c:12077 unregister_netdevice_many net/core/dev.c:12140 [inline] unregister_netdevice_queue+0x305/0x3f0 net/core/dev.c:11984 register_netdevice+0x18f1/0x2270 net/core/dev.c:11149 lapbeth_new_device drivers/net/wan/lapbether.c:420 [inline] lapbeth_device_event+0x5b1/0xbe0 drivers/net/wan/lapbether.c:462 notifier_call_chain+0xbc/0x410 kernel/notifier.c:85 call_netdevice_notifiers_info+0xbe/0x140 net/core/dev.c:2230 call_netdevice_notifiers_extack net/core/dev.c:2268 [inline] call_netdevice_notifiers net/core/dev.c:2282 [inline] __dev_notify_flags+0x12c/0x2e0 net/core/dev.c:9497 netif_change_flags+0x108/0x160 net/core/dev.c:9526 dev_change_flags+0xba/0x250 net/core/dev_api.c:68 devinet_ioctl+0x11d5/0x1f50 net/ipv4/devinet.c:1200 inet_ioctl+0x3a7/0x3f0 net/ipv4/af_inet.c:1001 0: https://lore.kernel.org/netdev/20250625140357.6203d0af@kernel.org/

In the Linux kernel, the following vulnerability has been resolved: block: avoid possible overflow for chunk_sectors check in blk_stack_limits() In blk_stack_limits(), we check that the t->chunk_sectors value is a multiple of the t->physical_block_size value. However, by finding the chunk_sectors value in bytes, we may overflow the unsigned int which holds chunk_sectors, so change the check to be based on sectors.

In the Linux kernel, the following vulnerability has been resolved: ARM: tegra: Use I/O memcpy to write to IRAM Kasan crashes the kernel trying to check boundaries when using the normal memcpy.

In the Linux kernel, the following vulnerability has been resolved: io_uring/memmap: cast nr_pages to size_t before shifting If the allocated size exceeds UINT_MAX, then it's necessary to cast the mr->nr_pages value to size_t to prevent it from overflowing. In practice this isn't much of a concern as the required memory size will have been validated upfront, and accounted to the user. And > 4GB sizes will be necessary to make the lack of a cast a problem, which greatly exceeds normal user locked_vm settings that are generally in the kb to mb range. However, if root is used, then accounting isn't done, and then it's possible to hit this issue.

In the Linux kernel, the following vulnerability has been resolved: dm: Always split write BIOs to zoned device limits Any zoned DM target that requires zone append emulation will use the block layer zone write plugging. In such case, DM target drivers must not split BIOs using dm_accept_partial_bio() as doing so can potentially lead to deadlocks with queue freeze operations. Regular write operations used to emulate zone append operations also cannot be split by the target driver as that would result in an invalid writen sector value return using the BIO sector. In order for zoned DM target drivers to avoid such incorrect BIO splitting, we must ensure that large BIOs are split before being passed to the map() function of the target, thus guaranteeing that the limits for the mapped device are not exceeded. dm-crypt and dm-flakey are the only target drivers supporting zoned devices and using dm_accept_partial_bio(). In the case of dm-crypt, this function is used to split BIOs to the internal max_write_size limit (which will be suppressed in a different patch). However, since crypt_alloc_buffer() uses a bioset allowing only up to BIO_MAX_VECS (256) vectors in a BIO. The dm-crypt device max_segments limit, which is not set and so default to BLK_MAX_SEGMENTS (128), must thus be respected and write BIOs split accordingly. In the case of dm-flakey, since zone append emulation is not required, the block layer zone write plugging is not used and no splitting of BIOs required. Modify the function dm_zone_bio_needs_split() to use the block layer helper function bio_needs_zone_write_plugging() to force a call to bio_split_to_limits() in dm_split_and_process_bio(). This allows DM target drivers to avoid using dm_accept_partial_bio() for write operations on zoned DM devices.

The Evertz SDVN 3080ipx-10G is a High Bandwidth Ethernet Switching Fabric for Video Application. This device exposes a web management interface on port 80. This web management interface can be used by administrators to control product features, setup network switching, and register license among other features. The application has been developed in PHP with the webEASY SDK, also named ‘ewb’ by Evertz. This web interface has two endpoints that are vulnerable to arbitrary command injection (CVE-2025-4009, CVE-2025-10364) and the authentication mechanism has a flaw leading to authentication bypass (CVE-2025-10365). CVE-2025-4009 covers the command injection in feature-transfer-import.php CVE-2025-10364 covers the command injection in feature-transfer-export.php Remote unauthenticated attackers can gain arbitrary command execution with elevated privileges ( root ) on affected devices. This level of access could lead to serious business impact such as the interruption of media streaming, modification of media being streamed, alteration of closed captions being generated, among others.

The Evertz SDVN 3080ipx-10G is a High Bandwidth Ethernet Switching Fabric for Video Application. This device exposes a web management interface on port 80. This web management interface can be used by administrators to control product features, setup network switching, and register license among other features. The application has been developed in PHP with the webEASY SDK, also named ‘ewb’ by Evertz. This web interface has two endpoints that are vulnerable to arbitrary command injection (CVE-2025-4009, CVE-2025-10364) and the authentication mechanism has a flaw leading to authentication bypass (CVE-2025-10365). Remote unauthenticated attackers can gain arbitrary command execution with elevated privileges ( root ) on affected devices. This level of access could lead to serious business impact such as the interruption of media streaming, modification of media being streamed, alteration of closed captions being generated, among others.

Langchaingo supports the use of jinja2 syntax when parsing prompts, which is in turn parsed using the gonja library v1.5.3. Gonja supports include and extends syntax to read files, which leads to a server side template injection vulnerability within langchaingo, allowing an attacker to insert a statement into a prompt to read the "etc/passwd" file.

httpsig-rs is a Rust implementation of IETF RFC 9421 http message signatures. Prior to version 0.0.19, the HMAC signature comparison is not timing-safe. This makes anyone who uses HS256 signature verification vulnerable to a timing attack that allows the attacker to forge a signature. Version 0.0.19 fixes the issue.

Hono is a Web application framework that provides support for any JavaScript runtime. In versions prior to 4.9.7, a flaw in the `bodyLimit` middleware could allow bypassing the configured request body size limit when conflicting HTTP headers were present. The middleware previously prioritized the `Content-Length` header even when a `Transfer-Encoding: chunked` header was also included. According to the HTTP specification, `Content-Length` must be ignored in such cases. This discrepancy could allow oversized request bodies to bypass the configured limit. Most standards-compliant runtimes and reverse proxies may reject such malformed requests with `400 Bad Request`, so the practical impact depends on the runtime and deployment environment. If body size limits are used as a safeguard against large or malicious requests, this flaw could allow attackers to send oversized request bodies. The primary risk is denial of service (DoS) due to excessive memory or CPU consumption when handling very large requests. The implementation has been updated to align with the HTTP specification, ensuring that `Transfer-Encoding` takes precedence over `Content-Length`. The issue is fixed in Hono v4.9.7, and all users should upgrade immediately.

dstack is a software development kit (SDK) to simplify the deployment of arbitrary containerized apps into trusted execution environments. In versions of dstack prior to 0.5.4, a malicious host may provide a crafted LUKS2 data volume to a dstack CVM for use as the `/data` mount. The guest will open the volume and write secret data using a volume key known to the attacker, causing disclosure of Wireguard keys and other secret information. The attacker can also pre-load data on the device, which could potentially compromise guest execution. LUKS2 volume metadata is not authenticated and supports null key-encryption algorithms, allowing an attacker to create a volume such that the volume opens (cryptsetup open) without error using any passphrase or token, records all writes in plaintext (or ciphertext with an attacker-known key), and/or contains arbitrary data chosen by the attacker. Version 0.5.4 of dstack contains a patch that addresses LUKS headers.

A vulnerability was identified in JeecgBoot up to 3.8.2. Affected by this vulnerability is an unknown functionality of the file /api/system/sendWebSocketMsg of the component WebSocket Message Handler. The manipulation of the argument userIds leads to improper authorization. The attack can be initiated remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.

Some "Stored Value" Unattended Payment Solutions of KioSoft use vulnerable NFC cards. Attackers could potentially use this vulnerability to change the balance on the cards and generate money. The account balance is stored on an insecure MiFare Classic NFC card and can be read and written back. By carefully observing changes in card dumps, one can identify fields that store the cash value of the card. Additionally, a checksum can be identified, which is created by XOR-ing the cash and an unknown field with a certain value. By updating the fields accordingly, arbitrary amounts of money can be loaded onto the card (up to $655,35) to pay for goods.

A Regular Expression Denial of Service (ReDoS) vulnerability was discovered in the Hugging Face Transformers library, specifically affecting the MarianTokenizer's `remove_language_code()` method. This vulnerability is present in version 4.52.4 and has been fixed in version 4.53.0. The issue arises from inefficient regex processing, which can be exploited by crafted input strings containing malformed language code patterns, leading to excessive CPU consumption and potential denial of service.

A Zabbix adminitrator can inject arbitrary SQL during the autoremoval of hosts by inserting malicious SQL in the 'Visible name' field.

Due to a bug in Zabbix API, the hostprototype.get method lists all host prototypes to users that do not have any user groups assigned to them.