Unspecified vulnerability in the IPSec Manager Service for Cisco Unified CallManager (CUCM) 5.0 before 5.0(4a)SU1 and Cisco Unified Presence Server (CUPS) 1.0 before 1.0(3) allows remote attackers to cause a denial of service (loss of cluster services) via a "specific UDP packet" to UDP port 8500, aka bug ID CSCsg60949.

The DHCP relay agent in Cisco Adaptive Security Appliance (ASA) and PIX 7.2 allows remote attackers to cause a denial of service (dropped packets) via a DHCPREQUEST or DHCPINFORM message that causes multiple DHCPACK messages to be sent from DHCP servers to the agent, which consumes the memory allocated for a local buffer. NOTE: this issue only occurs when multiple DHCP servers are used.

Cisco Unified CallManager (CUCM) 5.0 before 5.0(4a)SU1 and Cisco Unified Presence Server (CUPS) 1.0 before 1.0(3) allow remote attackers to cause a denial of service (loss of voice services) via a flood of ICMP echo requests, aka bug ID CSCsf12698.

The UDP process in Cisco IOS XR 4.3.1 does not free packet memory upon detecting full packet queues, which allows remote attackers to cause a denial of service (memory consumption) via UDP packets to listening ports, aka Bug ID CSCue69413.

Cisco FWSM 3.x before 3.1(3.2), when authentication is configured to use "aaa authentication match" or "aaa authentication include", allows remote attackers to cause a denial of service (device reboot) via a long HTTP request.

Cisco Firewall Services Module (FWSM) 3.x before 3.1(3.1) allows remote attackers to cause a denial of service (device reboot) via malformed SNMP requests.

Unspecified vulnerability in Cisco Firewall Services Module (FWSM) 3.x before 3.1(3.3), when set to log at the "debug" level, allows remote attackers to cause a denial of service (device reboot) by sending packets that are not of a particular protocol such as TCP or UDP, which triggers the reboot during generation of Syslog message 710006.

Cisco PIX 500 and ASA 5500 Series Security Appliances 6.x before 6.3(5.115), 7.0 before 7.0(5.2), and 7.1 before 7.1(2.5), and the FWSM 3.x before 3.1(3.24), when the "inspect sip" option is enabled, allows remote attackers to cause a denial of service (device reboot) via malformed SIP packets.

Memory leak in the TCP listener in Cisco IOS 9.x, 10.x, 11.x, and 12.x allows remote attackers to cause a denial of service by sending crafted TCP traffic to an IPv4 address on the IOS device.

Cisco IOS allows remote attackers to cause a denial of service (crash) via a crafted IPv6 Type 0 Routing header.

Multiple vulnerabilities in the Cisco ATA 190 Series Analog Telephone Adapter Software could allow an attacker to perform a command injection attack resulting in remote code execution or cause a denial of service (DoS) condition on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

Cisco Security Agent (CSA) for Linux 4.5 before 4.5.1.657 and 5.0 before 5.0.0.193, as used by Unified CallManager (CUCM) and Unified Presence Server (CUPS), allows remote attackers to cause a denial of service (resource consumption) via a port scan with certain options.

The VLAN Trunking Protocol (VTP) feature in Cisco IOS 12.1(19) allows remote attackers to cause a denial of service by sending a VTP version 1 summary frame with a VTP version field value of 2.

The VLAN Trunking Protocol (VTP) feature in Cisco IOS 12.1(19) and CatOS allows remote attackers to cause a denial of service by sending a VTP update with a revision value of 0x7FFFFFFF, which is incremented to 0x80000000 and is interpreted as a negative number in a signed context.

Multiple vulnerabilities in the Control and Provisioning of Wireless Access Points (CAPWAP) protocol processing of Cisco IOS XE Software for Cisco Catalyst 9000 Family Wireless Controllers could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. These vulnerabilities are due to insufficient validation of CAPWAP packets. An attacker could exploit the vulnerabilities by sending a malformed CAPWAP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to crash and reload, resulting in a DoS condition.

A vulnerability in the software-based SSL/TLS message handler of Cisco Adaptive Security Appliance (ASA) Software and Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. This vulnerability is due to insufficient validation of SSL/TLS messages when the device performs software-based SSL/TLS decryption. An attacker could exploit this vulnerability by sending a crafted SSL/TLS message to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. Note: Datagram TLS (DTLS) messages cannot be used to exploit this vulnerability.

Multiple unspecified vulnerabilities in the CSRadius service in Cisco Secure Access Control Server (ACS) for Windows before 4.1 and ACS Solution Engine before 4.1 allow remote attackers to cause a denial of service (crash) via a crafted RADIUS Access-Request packet. NOTE: it has been reported that at least one issue is a heap-based buffer overflow involving the Tunnel-Password attribute.

A vulnerability in the Cisco Network Plug and Play agent, also referred to as the Cisco Open Plug-n-Play agent, of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a memory leak on an affected device. The vulnerability is due to insufficient input validation by the affected software. An attacker could exploit this vulnerability by sending invalid data to the Cisco Network Plug and Play agent on an affected device. A successful exploit could allow the attacker to cause a memory leak on the affected device, which could cause the device to reload.

A vulnerability in the TCP ingress handler for the data interfaces that are configured with management access to Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause an increase in CPU and memory usage, resulting in a denial of service (DoS) condition. The vulnerability is due to insufficient ingress TCP rate limiting for TCP ports 22 (SSH) and 443 (HTTPS). An attacker could exploit this vulnerability by sending a crafted, steady stream of TCP traffic to port 22 or 443 on the data interfaces that are configured with management access to the affected device.

A vulnerability in the TACACS+ client subsystem of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to improper handling of crafted TACACS+ response packets by the affected software. An attacker could exploit this vulnerability by injecting a crafted TACACS+ packet into an existing TACACS+ session between an affected device and a TACACS+ server or by impersonating a known, valid TACACS+ server and sending a crafted TACACS+ packet to an affected device when establishing a connection to the device. To exploit this vulnerability by using either method, the attacker must know the shared TACACS+ secret and the crafted packet must be sent in response to a TACACS+ request from a TACACS+ client. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition.

A vulnerability in the Secure/Multipurpose Internet Mail Extensions (S/MIME) Decryption and Verification or S/MIME Public Key Harvesting features of Cisco AsyncOS Software for Cisco Email Security Appliance (ESA) could allow an unauthenticated, remote attacker to cause an affected device to corrupt system memory. A successful exploit could cause the filtering process to unexpectedly reload, resulting in a denial of service (DoS) condition on the device. The vulnerability is due to improper input validation of S/MIME-signed emails. An attacker could exploit this vulnerability by sending a malicious S/MIME-signed email through a targeted device. If Decryption and Verification or Public Key Harvesting is configured, the filtering process could crash due to memory corruption and restart, resulting in a DoS condition. The software could then resume processing the same S/MIME-signed email, causing the filtering process to crash and restart again. A successful exploit could allow the attacker to cause a permanent DoS condition. This vulnerability may require manual intervention to recover the ESA.

A vulnerability in the email message filtering feature of Cisco AsyncOS Software for Cisco Email Security Appliances (ESA) could allow an unauthenticated, remote attacker to cause the CPU utilization to increase to 100 percent, causing a denial of service (DoS) condition on an affected device. The vulnerability is due to improper filtering of email messages that contain references to whitelisted URLs. An attacker could exploit this vulnerability by sending a malicious email message that contains a large number of whitelisted URLs. A successful exploit could allow the attacker to cause a sustained DoS condition that could force the affected device to stop scanning and forwarding email messages.

A vulnerability in the WebVPN login process of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause increased CPU utilization on an affected device. The vulnerability is due to excessive processing load for existing WebVPN login operations. An attacker could exploit this vulnerability by sending multiple WebVPN login requests to the device. A successful exploit could allow the attacker to increase CPU load on the device, resulting in a denial of service (DoS) condition.

Cisco IOS XE 3.4 before 3.4.5S, and 3.5 through 3.7 before 3.7.1S, on 1000 series Aggregation Services Routers (ASR) does not properly implement the Cisco Multicast Leaf Recycle Elimination (MLRE) feature, which allows remote attackers to cause a denial of service (card reload) via fragmented IPv6 MVPN (aka MVPNv6) packets, aka Bug ID CSCub34945, a different vulnerability than CVE-2013-1164.

On April 20, 2022, the following vulnerability in the ClamAV scanning library versions 0.103.5 and earlier and 0.104.2 and earlier was disclosed: A vulnerability in HTML file parser of Clam AntiVirus (ClamAV) versions 0.104.0 through 0.104.2 and LTS version 0.103.5 and prior versions could allow an unauthenticated, remote attacker to cause a denial of service condition on an affected device. For a description of this vulnerability, see the ClamAV blog. This advisory will be updated as additional information becomes available.

A vulnerability in certain IPv4 fragment-processing functions of Cisco Remote PHY Software could allow an unauthenticated, remote attacker to impact traffic passing through a device, potentially causing a denial of service (DoS) condition. The vulnerability is due to the affected software not validating and calculating certain numerical values in IPv4 packets that are sent to an affected device. An attacker could exploit this vulnerability by sending malformed IPv4 traffic to an affected device. A successful exploit could allow the attacker to disrupt the flow of certain IPv4 traffic passing through an affected device, which could result in a DoS condition.

Control cards for Cisco Optical Networking System (ONS) 15000 series nodes before 20060405 allow remote attackers to cause a denial of service (memory exhaustion and possibly card reset) by sending an invalid response when the final ACK is expected, aka bug ID CSCei45910.

A vulnerability in the Session Initiation Protocol (SIP) inspection engine of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause an affected device to reload or trigger high CPU, resulting in a denial of service (DoS) condition. The vulnerability is due to improper handling of SIP traffic. An attacker could exploit this vulnerability by sending SIP requests designed to specifically trigger this issue at a high rate across an affected device. Software updates that address this vulnerability are not yet available.

A vulnerability in the memory management of Cisco Adaptive Security Appliance (ASA) Software and Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper resource management when connection rates are high. An attacker could exploit this vulnerability by opening a significant number of connections on an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition.

Cisco VPN 3000 series concentrators running software 4.7.0 through 4.7.2.A allow remote attackers to cause a denial of service (device reload or user disconnect) via a crafted HTTP packet.

Multiple vulnerabilities in the Control and Provisioning of Wireless Access Points (CAPWAP) protocol processing of Cisco IOS XE Software for Cisco Catalyst 9000 Family Wireless Controllers could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. These vulnerabilities are due to insufficient validation of CAPWAP packets. An attacker could exploit the vulnerabilities by sending a malformed CAPWAP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to crash and reload, resulting in a DoS condition.

Cisco CallManager 3.2 and earlier, 3.3 before 3.3(5)SR1, 4.0 before 4.0(2a)SR2c, and 4.1 before 4.1(3)SR2 allow remote attackers to (1) cause a denial of service (CPU and memory consumption) via a large number of open TCP connections to port 2000 and (2) cause a denial of service (fill the Windows Service Manager communication queue) via a large number of TCP connections to port 2001, 2002, or 7727.

Cisco IOS 11.x and 12.0 through 12.2 allows remote attackers to cause a denial of service (traffic block) by sending a particular sequence of IPv4 packets to an interface on the device, causing the input queue on that interface to be marked as full.

A vulnerability in the ingress flow creation functionality of Cisco Adaptive Security Appliance (ASA) could allow an unauthenticated, remote attacker to cause the CPU to increase upwards of 100% utilization, causing a denial of service (DoS) condition on an affected system. The vulnerability is due to incorrect handling of an internal software lock that could prevent other system processes from getting CPU cycles, causing a high CPU condition. An attacker could exploit this vulnerability by sending a steady stream of malicious IP packets that can cause connections to be created on the targeted device. A successful exploit could allow the attacker to exhaust CPU resources, resulting in a DoS condition during which traffic through the device could be delayed. This vulnerability applies to either IPv4 or IPv6 ingress traffic. This vulnerability affects Cisco Adaptive Security Appliance (ASA) and Firepower Threat Defense (FTD) Software that is running on the following Cisco products: 3000 Series Industrial Security Appliances (ISA), ASA 5500 Series Adaptive Security Appliances, ASA 5500-X Series Next-Generation Firewalls, ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Adaptive Security Virtual Appliances (ASAv), Firepower 2100 Series Security Appliances, Firepower 4110 Security Appliances, Firepower 9300 ASA Security Modules. Cisco Bug IDs: CSCvf63718.

A vulnerability in the Secure Sockets Layer (SSL) packet reassembly functionality of the detection engine in Cisco Firepower System Software could allow an unauthenticated, remote attacker to cause the detection engine to consume excessive system memory on an affected device, which could cause a denial of service (DoS) condition. The vulnerability is due to the affected software improperly handling changes to SSL connection states. An attacker could exploit this vulnerability by sending crafted SSL connections through an affected device. A successful exploit could allow the attacker to cause the detection engine to consume excessive system memory on the affected device, which could cause a DoS condition. The device may need to be reloaded manually to recover from this condition. This vulnerability affects Cisco Firepower System Software Releases 6.0.0 and later, running on any of the following Cisco products: Adaptive Security Appliance (ASA) 5500-X Series Firewalls with FirePOWER Services, Adaptive Security Appliance (ASA) 5500-X Series Next-Generation Firewalls, Advanced Malware Protection (AMP) for Networks, 7000 Series Appliances, Advanced Malware Protection (AMP) for Networks, 8000 Series Appliances, Firepower 4100 Series Appliances, FirePOWER 7000 Series Appliances, FirePOWER 8000 Series Appliances, Firepower 9300 Series Security Appliances, Firepower Threat Defense for Integrated Services Routers (ISRs), Firepower Threat Defense Virtual for VMware, Industrial Security Appliance 3000, Sourcefire 3D System Appliances. Cisco Bug IDs: CSCve23031.

A vulnerability in the web framework of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a buffer overflow condition on an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to the affected software improperly parsing malformed HTTP packets that are destined to a device. An attacker could exploit this vulnerability by sending a malformed HTTP packet to an affected device for processing. A successful exploit could allow the attacker to cause a buffer overflow condition on the affected device, resulting in a DoS condition.

A vulnerability in the DHCPv6 feature of the Cisco Nexus 9000 Series Fabric Switches in Application-Centric Infrastructure (ACI) Mode could allow an unauthenticated, remote attacker to cause the device to run low on system memory, which could result in a Denial of Service (DoS) condition on an affected system. The vulnerability is due to improper memory management when DHCPv6 packets are received on an interface of the targeted device. An attacker could exploit this vulnerability by sending a high number of malicious DHCPv6 packets to be processed by an affected device. A successful exploit could allow the attacker to cause the system to run low on memory, which could cause an eventual reboot of an affected device. The vulnerability only applies to IPv6 protocol packets and not for IPv4 protocol packets. This vulnerability affects Cisco Nexus 9000 Series Fabric Switches in ACI Mode running software version 13.0(1k). The vulnerability can only be exploited when unicast routing is enabled on the Bridge Domain (BD). DHCP and DHCP relay do not have to be configured for the vulnerability to be exploited. Cisco Bug IDs: CSCvg38918.

Memory leak in Cisco IOS 12.2, 12.4, 15.0, and 15.1, when Zone-Based Policy Firewall SIP application layer gateway inspection is enabled, allows remote attackers to cause a denial of service (memory consumption or device reload) via malformed SIP messages, aka Bug ID CSCtl99174.

The CallServer component in Cisco Unified Customer Voice Portal (CVP) Software before 9.0.1 ES 11 allows remote attackers to cause a denial of service (call-acceptance outage) via malformed SIP INVITE messages, aka Bug ID CSCua65148.

Cisco Adaptive Security Appliances (ASA) 5500 series devices, and the ASA Services module in Cisco Catalyst 6500 series devices, with software 7.0 before 7.0(8.13), 7.1 and 7.2 before 7.2(5.4), 8.0 before 8.0(5.25), 8.1 before 8.1(2.50), 8.2 before 8.2(5.6), 8.3 before 8.3(2.23), 8.4 before 8.4(2.7), and 8.5 before 8.5(1.1) and Cisco Firewall Services Module (aka FWSM) 3.1 before 3.1(21), 3.2 before 3.2(22), 4.0 before 4.0(16), and 4.1 before 4.1(7) allow remote attackers to cause a denial of service (device reload) via malformed ILS traffic, aka Bug IDs CSCtq57697 and CSCtq57802.

A vulnerability in the Flexible NetFlow Version 9 packet processor of Cisco IOS XE Software for Cisco Catalyst 9800 Series Wireless Controllers and Cisco AireOS Software for Cisco Wireless LAN Controllers (WLC) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to insufficient validation of certain parameters in a Flexible NetFlow Version 9 record. An attacker could exploit this vulnerability by spoofing the address of an existing Access Point on the network and sending a Control and Provisioning of Wireless Access Points (CAPWAP) packet that includes a crafted Flexible NetFlow Version 9 record to an affected device. A successful exploit could allow the attacker to cause a process crash that would lead to a reload of the device.

A vulnerability in the IPv6 processing code of Cisco IOS and IOS XE Software could allow an unauthenticated, remote attacker to cause the device to reload. The vulnerability is due to incorrect handling of specific IPv6 hop-by-hop options. An attacker could exploit this vulnerability by sending a malicious IPv6 packet to or through the affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a denial of service (DoS) condition on an affected device.

A vulnerability in the Border Gateway Protocol (BGP) implementation of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition due to the device unexpectedly reloading. The vulnerability is due to incomplete input validation of the BGP update messages. An attacker could exploit this vulnerability by sending a crafted BGP update message to the targeted device. An exploit could allow the attacker to cause the switch to reload unexpectedly. The Cisco implementation of the BGP protocol only accepts incoming BGP traffic from explicitly defined peers. To exploit this vulnerability, an attacker must be able to send the malicious packets over a TCP connection that appears to come from a trusted BGP peer or inject malformed messages into the victim's BGP network. This would require obtaining information about the BGP peers in the affected system's trusted network. The vulnerability may be triggered when the router receives a malformed BGP message from a peer on an existing BGP session. At least one BGP neighbor session must be established for a router to be vulnerable. This vulnerability affects Nexus 2000 Series Switches, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 3600 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Fabric Switches in Application Centric Infrastructure (ACI) mode, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules. Cisco Bug IDs: CSCve79599, CSCve87784, CSCve91371, CSCve91387.

A vulnerability in the web proxy functionality of Cisco AsyncOS Software for Cisco Web Security Appliances could allow an unauthenticated, remote attacker to exhaust system memory and cause a denial of service (DoS) condition on an affected system. The vulnerability exists because the affected software improperly manages memory resources for TCP connections to a targeted device. An attacker could exploit this vulnerability by establishing a high number of TCP connections to the data interface of an affected device via IPv4 or IPv6. A successful exploit could allow the attacker to exhaust system memory, which could cause the system to stop processing new connections and result in a DoS condition. System recovery may require manual intervention. Cisco Bug IDs: CSCvf36610.

A vulnerability in the Local Packet Transport Services (LPTS) feature set of Cisco ASR 9000 Series Aggregation Services Router Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to a lack of input and validation checking on certain Precision Time Protocol (PTP) ingress traffic to an affected device. An attacker could exploit this vulnerability by injecting malformed traffic into an affected device. A successful exploit could allow the attacker to cause services on the device to become unresponsive, resulting in a DoS condition. Cisco Bug IDs: CSCvj22858.

A vulnerability in the Zero Touch Provisioning service of the Cisco SD-WAN Solution could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to incorrect bounds checks for certain values in packets that are sent to the Zero Touch Provisioning service of the affected software. An attacker could exploit this vulnerability by sending malicious packets to the affected software for processing. When the software processes the packets, a buffer overflow condition could occur and cause an affected device to reload. A successful exploit could allow the attacker to cause a temporary DoS condition while the device reloads. This vulnerability can be exploited only by traffic that is destined for an affected device. It cannot be exploited by traffic that is transiting a device. This vulnerability affects the following Cisco products if they are running a release of the Cisco SD-WAN Solution prior to Release 18.3.0: vBond Orchestrator Software, vManage Network Management Software, vSmart Controller Software. Cisco Bug IDs: CSCvi69914.

A vulnerability in the implementation of Session Initiation Protocol (SIP) processing in Cisco Small Business SPA514G IP Phones could allow an unauthenticated, remote attacker to cause an affected device to become unresponsive, resulting in a denial of service (DoS) condition. The vulnerability is due to improper processing of SIP request messages by an affected device. An attacker could exploit this vulnerability by sending crafted SIP messages to an affected device. A successful exploit could allow the attacker to cause the affected device to become unresponsive, resulting in a DoS condition that persists until the device is restarted manually. Cisco has not released software updates that address this vulnerability. This vulnerability affects Cisco Small Business SPA514G IP Phones that are running firmware release 7.6.2SR2 or earlier.