An command injection vulnerability in HNAP1/SetWLanApcliSettings of Motorola CX2 router CX 1.0.2 Build 20190508 Rel.97360n allows attackers to execute arbitrary system commands.

An issue was discovered on Motorola C1 and M2 devices with firmware 1.01 and 1.07 respectively. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the system function with untrusted input from the request body for the SetStaticRouteSettings API function, as demonstrated by shell metacharacters in the staticroute_list field.

A memory leak in a Motorola CableRouter allows remote attackers to conduct a denial of service via a large number of telnet connections.

The Motorola CableRouter allows any remote user to connect to and configure the router on port 1024.

An issue was discovered on Motorola C1 and M2 devices with firmware 1.01 and 1.07 respectively. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the system function with untrusted input from the request body for the SetNetworkTomographySettings API function, as demonstrated by shell metacharacters in the tomography_ping_number field.

An issue was discovered on Motorola C1 and M2 devices with firmware 1.01 and 1.07 respectively. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the system function with untrusted input from the request body for the SetWLanACLSettings API function, as demonstrated by shell metacharacters in the wl(0).(0)_maclist field.

An issue was discovered on Motorola C1 and M2 devices with firmware 1.01 and 1.07 respectively. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the system function with untrusted input from the request body for the SetNTPServerSettings API function, as demonstrated by shell metacharacters in the system_time_timezone field.

An issue was discovered on Motorola C1 and M2 devices with firmware 1.01 and 1.07 respectively. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the system function with untrusted input from the request body for the SetSmartQoSSettings API function, as demonstrated by shell metacharacters in the smartqos_priority_devices field.

The Motorola MOTORAZR V3 phone allows remote attackers to cause a denial of service (continual modal dialogs and UI unavailability) by repeatedly trying to OBEX push a file over Bluetooth, as demonstrated by ussp-push.

Stack-based buffer overflow in the sub_E110 function in init in a certain configuration of Android 2.3.7 on the Motorola Defy XT phone for Republic Wireless allows local users to gain privileges or cause a denial of service (memory corruption) by writing a long string to the /dev/socket/init_runit socket that is inconsistent with a certain length value that was previously written to this socket.

Stack-based buffer overflow in Motorola Timbuktu Pro 8.6.5 on Windows allows remote attackers to execute arbitrary code by sending a long malformed string over the PlughNTCommand named pipe.

An improper input sanitization vulnerability in the Motorola MR2600 router could allow a local user with elevated permissions to execute arbitrary code.

Multiple stack-based buffer overflows in Motorola Scanner SDK allow remote attackers to execute arbitrary code via a crafted string to the Open method in (1) IOPOSScanner.ocx or (2) IOPOSScale.ocx.

The Comcast firmware on Motorola MX011ANM (firmware version MX011AN_2.9p6s1_PROD_sey) devices allows physically proximate attackers to execute arbitrary commands as root by pulling up the diagnostics menu on the set-top box, and then posting to a Web Inspector route.

Stack-based buffer overflow in the JPEG thumbprint component in the EXIF parser on Motorola cell phones with RAZR firmware allows user-assisted remote attackers to execute arbitrary code via an MMS transmission of a malformed JPEG image, which triggers memory corruption.

A vulnerability in the Java Remote Management Interface of Cisco Unified Contact Center Express (Unified CCX) could allow an unauthenticated, remote attacker to execute arbitrary code on an affected device. The vulnerability is due to insecure deserialization of user-supplied content by the affected software. An attacker could exploit this vulnerability by sending a malicious serialized Java object to a specific listener on an affected system. A successful exploit could allow the attacker to execute arbitrary code as the root user on an affected device.

A vulnerability in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an unauthenticated, remote attacker to execute arbitrary code on an affected device. The vulnerability is due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit this vulnerability by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system of the affected device.

Multiple vulnerabilities in Cisco IOS Software for Cisco 809 and 829 Industrial Integrated Services Routers (Industrial ISRs) and Cisco 1000 Series Connected Grid Routers (CGR1000) could allow an unauthenticated, remote attacker or an authenticated, local attacker to execute arbitrary code on an affected system or cause an affected system to crash and reload. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the REST API of Cisco UCS Director and Cisco UCS Director Express for Big Data may allow a remote attacker to bypass authentication or conduct directory traversal attacks on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the REST API of Cisco UCS Director and Cisco UCS Director Express for Big Data may allow a remote attacker to bypass authentication or conduct directory traversal attacks on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the Secure Sockets Layer (SSL) VPN feature of Cisco Small Business RV340, RV340W, RV345, and RV345P Dual WAN Gigabit VPN Routers could allow an unauthenticated, remote attacker to execute arbitrary code on an affected device or cause the device to reload, resulting in a denial of service (DoS) condition. The vulnerability exists because HTTP requests are not properly validated. An attacker could exploit this vulnerability by sending a crafted HTTP request over an SSL connection to an affected device. A successful exploit could allow the attacker to remotely execute arbitrary code on the device or cause the device to reload, resulting in a DoS condition.

A vulnerability in the web server for Cisco IP Phones could allow an unauthenticated, remote attacker to execute code with root privileges or cause a reload of an affected IP phone, resulting in a denial of service (DoS) condition. The vulnerability is due to a lack of proper input validation of HTTP requests. An attacker could exploit this vulnerability by sending a crafted HTTP request to the web server of a targeted device. A successful exploit could allow the attacker to remotely execute code with root privileges or cause a reload of an affected IP phone, resulting in a DoS condition.

Adobe Reader and Acrobat 9.x before 9.5.5, 10.x before 10.1.7, and 11.x before 11.0.03 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2013-2718, CVE-2013-2719, CVE-2013-2720, CVE-2013-2721, CVE-2013-2722, CVE-2013-2723, CVE-2013-2725, CVE-2013-2726, CVE-2013-2731, CVE-2013-2732, CVE-2013-2735, CVE-2013-2736, CVE-2013-3337, CVE-2013-3338, CVE-2013-3339, CVE-2013-3340, and CVE-2013-3341.

Multiple vulnerabilities in the API subsystem of Cisco Integrated Management Controller (IMC) could allow an unauthenticated, remote attacker to execute arbitrary code with root privileges. The vulnerabilities are due to improper boundary checks for certain user-supplied input. An attacker could exploit these vulnerabilities by sending a crafted HTTP request to the API subsystem of an affected system. When this request is processed, an exploitable buffer overflow condition may occur. A successful exploit could allow the attacker to execute arbitrary code with root privileges on the underlying operating system (OS).

A vulnerability in Cisco SD-WAN Solution Software could allow an unauthenticated, remote attacker to cause a buffer overflow on an affected device. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending crafted traffic to an affected device. A successful exploit could allow the attacker to gain access to information that they are not authorized to access, make changes to the system that they are not authorized to make, and execute commands on an affected system with privileges of the root user.

Multiple vulnerabilities in Cisco IOS Software for Cisco 809 and 829 Industrial Integrated Services Routers (Industrial ISRs) and Cisco 1000 Series Connected Grid Routers (CGR1000) could allow an unauthenticated, remote attacker or an authenticated, local attacker to execute arbitrary code on an affected system or cause an affected system to crash and reload. For more information about these vulnerabilities, see the Details section of this advisory.

An issue was discovered on D-Link DIR-825 R1 devices through 3.0.1 before 2020-11-20. A buffer overflow in the web interface allows attackers to achieve pre-authentication remote code execution.

Stack-based buffer overflow in Atrium MERCUR IMAPD allows remote attackers to have an unknown impact via a certain SUBSCRIBE command.

A vulnerability in the web-based management interface of Cisco RV110W Wireless-N VPN Firewall and Cisco RV215W Wireless-N VPN Router could allow an unauthenticated, remote attacker to execute arbitrary code on an affected device. The vulnerability is due to improper validation of user-supplied input data by the web-based management interface. An attacker could exploit this vulnerability by sending crafted requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code with the privileges of the root user.

Unrestricted file upload vulnerability in the onAttachFiles function in the upload tool (inc/lib/attachment.lib.php) in Wiclear before 0.11.1 allows remote attackers to upload and execute arbitrary PHP code via unspecified vectors related to filename validation. NOTE: some details were obtained from third party information.

A network interface of the novi_process_manager_daemon service, included in the NoviWare software distribution through NW400.2.6 and deployed on NoviSwitch devices, can be inadvertently exposed if an operator attempts to modify ACLs, because of a bug when ACL modifications are applied. This could be leveraged by remote, unauthenticated attackers to gain resultant privileged (root) code execution on the switch, because incoming packet data can contain embedded OS commands, and can also trigger a stack-based buffer overflow.

Adobe Reader and Acrobat 9.x before 9.5.5, 10.x before 10.1.7, and 11.x before 11.0.03 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2013-2718, CVE-2013-2720, CVE-2013-2721, CVE-2013-2722, CVE-2013-2723, CVE-2013-2725, CVE-2013-2726, CVE-2013-2731, CVE-2013-2732, CVE-2013-2734, CVE-2013-2735, CVE-2013-2736, CVE-2013-3337, CVE-2013-3338, CVE-2013-3339, CVE-2013-3340, and CVE-2013-3341.

jslock.cpp in Mozilla Firefox 3.x before 3.0.2, Firefox 2.x before 2.0.0.18, Thunderbird 2.x before 2.0.0.18, and SeaMonkey 1.x before 1.1.13 allows remote attackers to cause a denial of service (crash) and possibly execute arbitrary code by modifying the window.__proto__.__proto__ object in a way that causes a lock on a non-native object, which triggers an assertion failure related to the OBJ_IS_NATIVE function.

A vulnerability was detected in IP-COM W30AP up to 1.0.0.11(1340). Affected by this issue is the function R7WebsSecurityHandler of the file /goform/wx3auth of the component POST Request Handler. The manipulation of the argument data results in stack-based buffer overflow. The attack may be performed from remote. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Multiple vulnerabilities in the Java deserialization function that is used by Cisco Security Manager could allow an unauthenticated, remote attacker to execute arbitrary commands on an affected device. These vulnerabilities are due to insecure deserialization of user-supplied content by the affected software. An attacker could exploit these vulnerabilities by sending a malicious serialized Java object to a specific listener on an affected system. A successful exploit could allow the attacker to execute arbitrary commands on the device with the privileges of NT AUTHORITY\SYSTEM on the Windows target host. Cisco has not released software updates that address these vulnerabilities.

Buffer overflow in Adobe Shockwave Player before 12.0.2.122 allows attackers to execute arbitrary code via unspecified vectors.

An issue was discovered in Tiny Tiny RSS (aka tt-rss) before 2020-09-16. It does not validate all URLs before requesting them.

A S+ Operations and S+ Historian service is subject to a DoS by special crafted messages. An attacker might use this flaw to make it crash or even execute arbitrary code on the machine where the service is hosted.

The Network Analysis Module (NAM) in Cisco Catalyst Series 6000, 6500, and 7600 allows remote attackers to execute arbitrary commands via certain SNMP packets that are spoofed from the NAM's own IP address.

Addressed remote code execution vulnerability in reg_device.php due to insufficient validation of user input.in Western Digital My Cloud Devices prior to 5.4.1140.

A remote bytemessageresource transformentity" input validation code execution vulnerability was discovered in HPE Intelligent Management Center (iMC) version(s): Prior to iMC PLAT 7.3 (E0705P07).

A remote accessmgrservlet classname input validation code execution vulnerability was discovered in HPE Intelligent Management Center (iMC) version(s): Prior to iMC PLAT 7.3 (E0705P07).

A flaw has been found in UTT HiPER 810 1.7.4-141218. The impacted element is the function strcpy of the file /goform/setSysAdm. This manipulation of the argument passwd1 causes buffer overflow. Remote exploitation of the attack is possible. The exploit has been published and may be used.

Heap-based buffer overflow in an unspecified procedure in Trend Micro ServerProtect 5.7 and 5.58 allows remote attackers to execute arbitrary code via unknown vectors, possibly related to a folder read operation over RPC.

Multiple buffer overflows in ulogd for SUSE Linux 9.3 up to 10.1, and possibly other distributions, have unknown impact and attack vectors related to "improper string length calculations."

Buffer overflow in Ipswitch WS_FTP Home client allows remote FTP servers to have an unknown impact via a long "message response."

Adobe Reader and Acrobat 9.x before 9.5.5, 10.x before 10.1.7, and 11.x before 11.0.03 allow attackers to execute arbitrary code or cause a denial of service (memory corruption) via unspecified vectors, a different vulnerability than CVE-2013-2719, CVE-2013-2720, CVE-2013-2721, CVE-2013-2722, CVE-2013-2723, CVE-2013-2725, CVE-2013-2726, CVE-2013-2731, CVE-2013-2732, CVE-2013-2734, CVE-2013-2735, CVE-2013-2736, CVE-2013-3337, CVE-2013-3338, CVE-2013-3339, CVE-2013-3340, and CVE-2013-3341.

The DHCP server in EMC VMware Workstation before 5.5.5 Build 56455 and 6.x before 6.0.1 Build 55017, Player before 1.0.5 Build 56455 and Player 2 before 2.0.1 Build 55017, ACE before 1.0.3 Build 54075 and ACE 2 before 2.0.1 Build 55017, and Server before 1.0.4 Build 56528 allows remote attackers to execute arbitrary code via a malformed packet that triggers "corrupt stack memory."