An issue was discovered on Motorola C1 and M2 devices with firmware 1.01 and 1.07 respectively. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the system function with untrusted input from the request body for the SetSmartQoSSettings API function, as demonstrated by shell metacharacters in the smartqos_priority_devices field.

An issue was discovered on Motorola C1 and M2 devices with firmware 1.01 and 1.07 respectively. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the system function with untrusted input from the request body for the SetWLanACLSettings API function, as demonstrated by shell metacharacters in the wl(0).(0)_maclist field.

An issue was discovered in Motorola CX2 1.01 and M2 1.01. There is a command injection in the function startRmtAssist in hnap, which leads to remote code execution via shell metacharacters in a JSON value.

An command injection vulnerability in HNAP1/SetWLanApcliSettings of Motorola CX2 router CX 1.0.2 Build 20190508 Rel.97360n allows attackers to execute arbitrary system commands.

An issue was discovered on Motorola C1 and M2 devices with firmware 1.01 and 1.07 respectively. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the system function with untrusted input from the request body for the SetStaticRouteSettings API function, as demonstrated by shell metacharacters in the staticroute_list field.

An issue was discovered on Motorola C1 and M2 devices with firmware 1.01 and 1.07 respectively. This issue is a Command Injection allowing a remote attacker to execute arbitrary code, and get a root shell. A command Injection vulnerability allows attackers to execute arbitrary OS commands via a crafted /HNAP1 POST request. This occurs when any HNAP API function triggers a call to the system function with untrusted input from the request body for the SetNetworkTomographySettings API function, as demonstrated by shell metacharacters in the tomography_ping_number field.

An issue was discovered in Motorola CX2 1.01 and M2 1.01. There is a command injection in the function downloadFirmware in hnap, which leads to remote code execution via shell metacharacters in a JSON value.

An issue was discovered in scopd on Motorola routers CX2 1.01 and M2 1.01. There is a Use of an Externally Controlled Format String, reachable via TCP port 8010 or UDP port 8080.

In Motorola CX2 1.01 and M2 1.01, users can access the router's /priv_mgt.html web page to launch telnetd, as demonstrated by the 192.168.51.1 address.

The Motorola CableRouter allows any remote user to connect to and configure the router on port 1024.

Motorola SBG901 SBG901-2.10.1.1-GA-00-581-NOSH, SBG941 SBG941-2.11.0.0-GA-07-624-NOSH, and SVG1202 SVG1202-2.1.0.0-GA-14-LTSH devices allow remote attackers to discover credentials via iso.3.6.1.4.1.4491.2.4.1.1.6.1.1.0 and iso.3.6.1.4.1.4491.2.4.1.1.6.1.2.0 SNMP requests.

Multiple buffer overflows in Motorola Timbuktu Pro before 8.6.5 for Windows allow remote attackers to cause a denial of service (daemon crash) or possibly execute arbitrary code via (1) a long user name and (2) certain malformed requests; and (3) allow remote Timbuktu servers to have an unknown impact via a malformed HELLO response, related to the Scanner component and possibly related to a malformed computer name.

A memory leak in a Motorola CableRouter allows remote attackers to conduct a denial of service via a large number of telnet connections.

A privilege escalation vulnerability was reported in the MM1000 device configuration web server, which could allow privileged shell access and/or arbitrary privileged commands to be executed on the adapter.

A command injection vulnerability in HNAP1/GetNetworkTomographySettings of Motorola CX2 router CX 1.0.2 Build 20190508 Rel.97360n allows attackers to execute arbitrary code.

A command injection vulnerability exists in Motorola CX2L router v1.0.2 and below. The vulnerability is present in the SetStationSettings function. The system directly invokes the system function to execute commands for setting parameters such as MAC address without proper input filtering. This allows malicious users to inject and execute arbitrary commands.

An issue was discovered on Fujitsu ETERNUS CentricStor CS8000 (Control Center) devices before 8.1A SP02 P04. The vulnerability resides in the grel_finfo function in grel.php. An attacker is able to influence the username (user), password (pw), and file-name (file) parameters and inject special characters such as semicolons, backticks, or command-substitution sequences in order to force the application to execute arbitrary commands.

The reported vulnerability allows an attacker who has network access to the device to execute code with specially crafted packets in WAGO Series PFC 100 (750-81xx/xxx-xxx), Series PFC 200 (750-82xx/xxx-xxx), Series Wago Touch Panel 600 Standard Line (762-4xxx), Series Wago Touch Panel 600 Advanced Line (762-5xxx), Series Wago Touch Panel 600 Marine Line (762-6xxx) with firmware versions <=FW10.

Roxy-WI is a web interface for managing Haproxy, Nginx, Apache and Keepalived servers. Versions prior to 6.1.1.0 are subject to a remote code execution vulnerability. System commands can be run remotely via the subprocess_execute function without processing the inputs received from the user in the /app/options.py file. Attackers need not be authenticated to exploit this vulnerability. Users are advised to upgrade. There are no known workarounds for this vulnerability.

Artica Proxy before 4.30.000000 Community Edition allows OS command injection via the Netbios name, Server domain name, dhclient_mac, Hostname, or Alias field. NOTE: this may overlap CVE-2020-10818.

Post Oak AWAM Bluetooth Field Device 7400v2.08.21.2018, 7800SD.2015.1.16, 2011.3, 7400v2.02.01.2019, and 7800SD.2012.12.5 is vulnerable to injections of operating system commands through timeconfig.py via shell metacharacters in the htmlNtpServer parameter.

openITCOCKPIT before 3.7.3 has a web-based terminal that allows attackers to execute arbitrary OS commands via shell metacharacters that are mishandled on an su command line in app/Lib/SudoMessageInterface.php.

TimeTools SC7105 1.0.007, SC9205 1.0.007, SC9705 1.0.007, SR7110 1.0.007, SR9210 1.0.007, SR9750 1.0.007, SR9850 1.0.007, T100 1.0.003, T300 1.0.003, and T550 1.0.003 devices allow remote attackers to execute arbitrary OS commands via shell metacharacters in the t3.cgi srmodel or srtime parameter.

Network Vision IntraVue before 2.3.0a14 on Windows allows remote attackers to execute arbitrary OS commands via unspecified vectors.

AVM Fritz!Box allows remote attackers to execute arbitrary commands via shell metacharacters in the var:lang parameter to cgi-bin/webcm.

A vulnerability in the parisneo/lollms-webui version 9.3 allows attackers to bypass intended access restrictions and execute arbitrary code. The issue arises from the application's handling of the `/execute_code` endpoint, which is intended to be blocked from external access by default. However, attackers can exploit the `/update_setting` endpoint, which lacks proper access control, to modify the `host` configuration at runtime. By changing the `host` setting to an attacker-controlled value, the restriction on the `/execute_code` endpoint can be bypassed, leading to remote code execution. This vulnerability is due to improper neutralization of special elements used in an OS command (`Improper Neutralization of Special Elements used in an OS Command`).

An unauthenticated attacker can update the hostname with a specially crafted name that will allow for shell commands to be executed during the core collection process. This vulnerability impacts products based on HID Mercury Intelligent Controllers LP1501, LP1502, LP2500, LP4502, and EP4502 which contain firmware versions prior to 1.302 for the LP series and 1.296 for the EP series. An attacker with this level of access on the device can monitor all communications sent to and from this device, modify onboard relays, change configuration files, or cause the device to become unstable. The injected commands only get executed during start up or when unsafe calls regarding the hostname are used. This allows the attacker to gain remote access to the device and can make their persistence permanent by modifying the filesystem.

Tenda AC18 router V15.03.05.19 and V15.03.05.05 was discovered to contain a remote code execution (RCE) vulnerability via the Mac parameter at ip/goform/WriteFacMac.

An issue in adm.cgi of WAVLINK AERIAL X 1200M M79X3.V5030.180719 allows attackers to execute arbitrary commands via a crafted POST request.

An issue was found on TRENDnet TEW-831DR 1.0 601.130.1.1356 devices. An OS injection vulnerability exists within the web interface, allowing an attacker with valid credentials to execute arbitrary shell commands.

A OS command injection vulnerability in the CGI program of Zyxel USG FLEX 100(W) firmware versions 5.00 through 5.21 Patch 1, USG FLEX 200 firmware versions 5.00 through 5.21 Patch 1, USG FLEX 500 firmware versions 5.00 through 5.21 Patch 1, USG FLEX 700 firmware versions 5.00 through 5.21 Patch 1, USG FLEX 50(W) firmware versions 5.10 through 5.21 Patch 1, USG20(W)-VPN firmware versions 5.10 through 5.21 Patch 1, ATP series firmware versions 5.10 through 5.21 Patch 1, VPN series firmware versions 4.60 through 5.21 Patch 1, which could allow an attacker to modify specific files and then execute some OS commands on a vulnerable device.

In Festo Controller CECC-X-M1 product family in multiple versions, the http-endpoint "cecc-x-web-viewer-request-off" POST request doesn’t check for port syntax. This can result in unauthorized execution of system commands with root privileges due to improper access control command injection.

cgi-bin/mft/wireless_mft.cgi in AirLive BU-2015 with firmware 1.03.18 16.06.2014, AirLive BU-3026 with firmware 1.43 21.08.2014, AirLive MD-3025 with firmware 1.81 21.08.2014, AirLive WL-2000CAM with firmware LM.1.6.18 14.10.2011, and AirLive POE-200CAM v2 with firmware LM.1.6.17.01 uses hard-coded credentials in the embedded Boa web server, which allows remote attackers to obtain user credentials via crafted HTTP requests.

In Belkin N300 Firmware 1.00.08, the script located at /setting_hidden.asp, which is accessible before and after configuring the device, exhibits multiple remote command injection vulnerabilities. The following parameters in the [form name] form; [list vulnerable parameters], are not properly sanitized after being submitted to the web interface in a POST request. With specially crafted parameters, it is possible to inject a an OS command which will be executed with root privileges, as the web interface, and all processes on the device, run as root.

In Festo Controller CECC-X-M1 product family in multiple versions, the http-endpoint "cecc-x-acknerr-request" POST request doesn’t check for port syntax. This can result in unauthorized execution of system commands with root privileges due to improper access control command injection.

Tenda TX9 Pro 22.03.02.10 devices allow OS command injection via set_route (called by doSystemCmd_route).

In Festo Controller CECC-X-M1 product family in multiple versions, the http-endpoint "cecc-x-web-viewer-request-on" POST request doesn’t check for port syntax. This can result in unauthorized execution of system commands with root privileges due to improper access control command injection.

In Festo Controller CECC-X-M1 product family in multiple versions, the http-endpoint "cecc-x-refresh-request" POST request doesn’t check for port syntax. This can result in unauthorized execution of system commands with root privileges due to improper access control command injection.

TOTOLink N600R V5.3c.7159_B20190425 was discovered to contain a command injection vulnerability via the filename parameter in /setting/setUploadSetting.

TOTOLink N600R V5.3c.7159_B20190425 was discovered to contain a command injection vulnerability via the devicemac parameter in /setting/setDeviceName.

A command injection vulnerability in the component /SetTriggerLEDBlink/Blink of D-Link DIR882 DIR882A1_FW130B06 allows attackers to escalate privileges to root via a crafted payload.

A command injection vulnerability in the component /setnetworksettings/SubnetMask of D-Link DIR882 DIR882A1_FW130B06 allows attackers to escalate privileges to root via a crafted payload.

A command injection vulnerability in the component /setnetworksettings/IPAddress of D-Link DIR882 DIR882A1_FW130B06 allows attackers to escalate privileges to root via a crafted payload.

IBM Spectrum Protect Plus 10.1.0 and 10.1.5 could allow a remote attacker to execute arbitrary code on the system. By using a specially crafted HTTP command, an attacker could exploit this vulnerability to execute arbitrary command on the system. IBM X-Force ID: 175020.

It is found that there is a command injection vulnerability in the setWiFiAdvancedCfg interface in TOTOlink A7100RU (v7.4cu.2313_b20191024) router, which allows an attacker to execute arbitrary commands through a carefully constructed payload.

It is found that there is a command injection vulnerability in the setL2tpServerCfg interface in TOTOlink A7100RU (v7.4cu.2313_b20191024) router, which allows an attacker to execute arbitrary commands through a carefully constructed payload.

TOTOLink N600R V5.3c.7159_B20190425 was discovered to contain a command injection vulnerability via the filename parameter in /setting/CloudACMunualUpdate.

GNU Bash through 4.3 bash43-025 processes trailing strings after certain malformed function definitions in the values of environment variables, which allows remote attackers to write to files or possibly have unknown other impact via a crafted environment, as demonstrated by vectors involving the ForceCommand feature in OpenSSH sshd, the mod_cgi and mod_cgid modules in the Apache HTTP Server, scripts executed by unspecified DHCP clients, and other situations in which setting the environment occurs across a privilege boundary from Bash execution. NOTE: this vulnerability exists because of an incomplete fix for CVE-2014-6271.

Command Injection in the Ping Module in the Web Interface on Technicolor TD5336 OI_Fw_v7 devices allows remote attackers to execute arbitrary OS commands as root via shell metacharacters in the pingAddr parameter to mnt_ping.cgi.

It is found that there is a command injection vulnerability in the setWiFiWpsStart interface in TOTOlink A7100RU (v7.4cu.2313_b20191024) router, which allows an attacker to execute arbitrary commands through a carefully constructed payload.