arch/powerpc/mm/mmu_context_book3s64.c in the Linux kernel before 5.1.15 for powerpc has a bug where unrelated processes may be able to read/write to one another's virtual memory under certain conditions via an mmap above 512 TB. Only a subset of powerpc systems are affected.

A certain Red Hat patch for the Linux kernel in Red Hat Enterprise Linux (RHEL) 4 on the ia64 platform allows local users to use ptrace on an arbitrary process, and consequently gain privileges, via vectors related to a missing ptrace_check_attach call.

A flaw was found in podman before 1.7.0. File permissions for non-root users running in a privileged container are not correctly checked. This flaw can be abused by a low-privileged user inside the container to access any other file in the container, even if owned by the root user inside the container. It does not allow to directly escape the container, though being a privileged container means that a lot of security features are disabled when running the container. The highest threat from this vulnerability is to data confidentiality and integrity as well as system availability.

An issue was discovered in the Linux kernel before 5.0.4. There is a use-after-free upon attempted read access to /proc/ioports after the ipmi_si module is removed, related to drivers/char/ipmi/ipmi_si_intf.c, drivers/char/ipmi/ipmi_si_mem_io.c, and drivers/char/ipmi/ipmi_si_port_io.c.

rkt through version 1.30.0 does not isolate processes in containers that are run with `rkt enter`. Processes run with `rkt enter` are not limited by cgroups during stage 2 (the actual environment in which the applications run). Compromised containers could exploit this flaw to access host resources.

rkt through version 1.30.0 does not isolate processes in containers that are run with `rkt enter`. Processes run with `rkt enter` do not have seccomp filtering during stage 2 (the actual environment in which the applications run). Compromised containers could exploit this flaw to access host resources.

rkt through version 1.30.0 does not isolate processes in containers that are run with `rkt enter`. Processes run with `rkt enter` are given all capabilities during stage 2 (the actual environment in which the applications run). Compromised containers could exploit this flaw to access host resources.

It was discovered freeradius up to and including version 3.0.19 does not correctly configure logrotate, allowing a local attacker who already has control of the radiusd user to escalate his privileges to root, by tricking logrotate into writing a radiusd-writable file to a directory normally inaccessible by the radiusd user. NOTE: the upstream software maintainer has stated "there is simply no way for anyone to gain privileges through this alleged issue."

Multiple race conditions in fs/pipe.c in the Linux kernel before 2.6.32-rc6 allow local users to cause a denial of service (NULL pointer dereference and system crash) or gain privileges by attempting to open an anonymous pipe via a /proc/*/fd/ pathname.

A certain Red Hat modification to the ChrootDirectory feature in OpenSSH 4.8, as used in sshd in OpenSSH 4.3 in Red Hat Enterprise Linux (RHEL) 5.4 and Fedora 11, allows local users to gain privileges via hard links to setuid programs that use configuration files within the chroot directory, related to requirements for directory ownership.

The configtest function in the Red Hat dhcpd init script for DHCP 3.0.1 in Red Hat Enterprise Linux (RHEL) 3 allows local users to overwrite arbitrary files via a symlink attack on an unspecified temporary file, related to the "dhcpd -t" command.

The tower_probe function in drivers/usb/misc/legousbtower.c in the Linux kernel before 4.8.1 allows local users (who are physically proximate for inserting a crafted USB device) to gain privileges by leveraging a write-what-where condition that occurs after a race condition and a NULL pointer dereference.

A flaw was found in tripleo-ansible version as shipped in Red Hat Openstack 16.1. The Ansible log file is readable to all users during stack update and creation. The highest threat from this vulnerability is to data confidentiality.

dovecot 1.0.7 in Red Hat Enterprise Linux (RHEL) 5, and possibly Fedora, uses world-readable permissions for dovecot.conf, which allows local users to obtain the ssl_key_password parameter value.

Service works could inappropriately gain access to cross origin audio in Media in Google Chrome prior to 71.0.3578.80 allowed a remote attacker to bypass same origin policy for audio content via a crafted HTML page.

Remote frame navigations was incorrectly permitted to local resources in Blink in Google Chrome prior to 71.0.3578.80 allowed an attacker who convinced a user to install a malicious extension to access files on the local file system via a crafted Chrome Extension.

A permissions flaw was found in redis, which sets weak permissions on certain files and directories that could potentially contain sensitive information. A local, unprivileged user could possibly use this flaw to access unauthorized system information.

It was found in EAP 7 before 7.0.9 that properties based files of the management and the application realm configuration that contain user to role mapping are world readable allowing access to users and roles information to all the users logged in to the system.

A postinstall script in the dovecot rpm allows local users to read the contents of newly created SSL/TLS key files.

ipmievd (aka the IPMI event daemon) in OpenIPMI, as used in the ipmitool package 1.8.11 in Red Hat Enterprise Linux (RHEL) 6, Debian GNU/Linux, Fedora 16, and other products uses 0666 permissions for its ipmievd.pid PID file, which allows local users to kill arbitrary processes by writing to this file.

A flaw was found in tripleo-ansible. Due to an insecure default configuration, the permissions of a sensitive file are not sufficiently restricted. This flaw allows a local attacker to use brute force to explore the relevant directory and discover the file. This issue leads to information disclosure of important configuration details from the OpenStack deployment.

A flaw was found in tripleo-ansible. Due to an insecure default configuration, the permissions of a sensitive file are not sufficiently restricted. This flaw allows a local attacker to use brute force to explore the relevant directory and discover the file, leading to information disclosure of important configuration details from the OpenStack deployment.

It was reported that watchman in openshift node-utils creates /var/run/watchman.pid and /var/log/watchman.ouput with world writable permission.

An issue exists AccountService 0.6.37 in the user_change_password_authorized_cb() function in user.c which could let a local users obtain encrypted passwords.

It was found that rhnsd PID files are created as world-writable that allows local attackers to fill the disks or to kill selected processes.

Apache Struts before 2.3.1.2 allows remote attackers to bypass security protections in the ParameterInterceptor class and execute arbitrary commands.

A vulnerability was found in all openshift/mediawiki 4.x.x versions prior to 4.3.0, where an insecure modification vulnerability in the /etc/passwd file was found in the openshift/mediawiki. An attacker with access to the container could use this flaw to modify /etc/passwd and escalate their privileges.

A flaw was found in all versions of Keycloak before 10.0.0, where the NodeJS adapter did not support the verify-token-audience. This flaw results in some users having access to sensitive information outside of their permissions.

An insecure modification vulnerability flaw was found in containers using nmstate/kubernetes-nmstate-handler. An attacker with access to the container could use this flaw to modify /etc/passwd and escalate their privileges. Versions before kubernetes-nmstate-handler-container-v2.3.0-30 are affected.

It has been found that in openshift-enterprise version 3.11 and openshift-enterprise versions 4.1 up to, including 4.3, multiple containers modify the permissions of /etc/passwd to make them modifiable by users other than root. An attacker with access to the running container can exploit this to modify /etc/passwd to add a user and escalate their privileges. This CVE is specific to the openshift/apb-tools-container.

A flaw was found in Red Hat Satellite, which allows a privileged attacker to read OMAPI secrets through the ISC DHCP of Smart-Proxy. This flaw allows an attacker to gain control of DHCP records from the network. The highest threat from this vulnerability is to system availability.

An information-disclosure flaw was found in Grafana through 6.7.3. The database directory /var/lib/grafana and database file /var/lib/grafana/grafana.db are world readable. This can result in exposure of sensitive information (e.g., cleartext or encrypted datasource passwords).

An incorrect sysctls validation vulnerability was found in CRI-O 1.18 and earlier. The sysctls from the list of "safe" sysctls specified for the cluster will be applied to the host if an attacker is able to create a pod with a hostIPC and hostNetwork kernel namespace.

An Incorrect Permission Assignment for Critical Resource flaw was found in Horizon on Red Hat OpenStack. Horizon session cookies are created without the HttpOnly flag despite HorizonSecureCookies being set to true in the environmental files, possibly leading to a loss of confidentiality and integrity.

An exposure of sensitive information flaw was found in Ansible version 3.7.0. Sensitive information, such tokens and other secrets could be readable and exposed from the rsyslog configuration file, which has set the wrong world-readable permissions. The highest threat from this vulnerability is to confidentiality. This is fixed in Ansible version 3.7.1.

An information-disclosure flaw was found in the way that gluster-block before 0.5.1 logs the output from gluster-block CLI operations. This includes recording passwords to the cmd_history.log file which is world-readable. This flaw allows local users to obtain sensitive information by reading the log file. The highest threat from this vulnerability is to data confidentiality.

It was discovered that sos-collector does not properly set the default permissions of newly created files, making all files created by the tool readable by any local user. A local attacker may use this flaw by waiting for a legit user to run sos-collector and steal the collected data in the /var/tmp directory.

It was found Ceph versions before 13.2.4 that authenticated ceph users with read only permissions could steal dm-crypt encryption keys used in ceph disk encryption.

A vulnerability where a WebExtension can run content scripts in disallowed contexts following navigation or other events. This allows for potential privilege escalation by the WebExtension on sites where content scripts should not be run. This vulnerability affects Firefox ESR < 60.3 and Firefox < 63.

setup before version 2.11.4-1.fc28 in Fedora and Red Hat Enterprise Linux added /sbin/nologin and /usr/sbin/nologin to /etc/shells. This violates security assumptions made by pam_shells and some daemons which allow access based on a user's shell being listed in /etc/shells. Under some circumstances, users which had their shell changed to /sbin/nologin could still access the system.

Red Hat OpenShift Enterprise version 3.7 is vulnerable to access control override for container network filesystems. An attacker could override the UserId and GroupId for GlusterFS and NFS to read and write any data on the network filesystem.

In postgresql 9.3.x before 9.3.21, 9.4.x before 9.4.16, 9.5.x before 9.5.11, 9.6.x before 9.6.7 and 10.x before 10.2, pg_upgrade creates file in current working directory containing the output of `pg_dumpall -g` under umask which was in effect when the user invoked pg_upgrade, and not under 0077 which is normally used for other temporary files. This can allow an authenticated attacker to read or modify the one file, which may contain encrypted or unencrypted database passwords. The attack is infeasible if a directory mode blocks the attacker searching the current working directory or if the prevailing umask blocks the attacker opening the file.

Dell EMC iDRAC Service Module for all supported Linux and XenServer versions v3.0.1, v3.0.2, v3.1.0, v3.2.0, when started, changes the default file permission of the hosts file of the host operating system (/etc/hosts) to world writable. A malicious low privileged operating system user or process could modify the host file and potentially redirect traffic from the intended destination to sites hosting malicious or unwanted content.

redhat-certification does not properly restrict files that can be download through the /download page. A remote attacker may download any file accessible by the user running httpd.

source-to-image component of Openshift Container Platform before versions atomic-openshift 3.7.53, atomic-openshift 3.9.31 is vulnerable to a privilege escalation which allows the assemble script to run as the root user in a non-privileged container. An attacker can use this flaw to open network connections, and possibly other actions, on the host which are normally only available to a root user.

In Mercurial before 4.1.3, "hg serve --stdio" allows remote authenticated users to launch the Python debugger, and consequently execute arbitrary code, by using --debugger as a repository name.

PackageKit 0.6.17 allows installation of unsigned RPM packages as though they were signed which may allow installation of non-trusted packages and execution of arbitrary code.

Blink in Google Chrome prior to 61.0.3163.79 for Mac, Windows, and Linux, and 61.0.3163.81 for Android, failed to correctly propagate CSP restrictions to javascript scheme pages, which allowed a remote attacker to bypass content security policy via a crafted HTML page.

IBM Robotic Process Automation for Cloud Pak 21.0.1 through 21.0.4 could allow a local user to perform unauthorized actions due to insufficient permission settings. IBM X-Force ID: 244073.