An issue was discovered in EMC ScaleIO 2.0.1.x. A buffer overflow vulnerability in the SDBG service may potentially allow a remote unauthenticated attacker to execute arbitrary commands with root privileges on an affected server.

Heap-based buffer overflow in aws_tmxn.exe in the Admin Agent service in the server in EMC Documentum ApplicationXtender Workflow, possibly 5.40 SP1 and earlier, allows remote attackers to execute arbitrary code via crafted packet data to TCP port 2606.

EMC Mainframe Enablers ResourcePak Base versions 7.6.0, 8.0.0, and 8.1.0 contains a fix for a privilege management vulnerability that could potentially be exploited by malicious users to compromise the affected system.

In EMC VNX2 versions prior to OE for File 8.1.9.211 and VNX1 versions prior to OE for File 7.1.80.8, an unauthenticated remote attacker may be able to elevate their permissions to root through a command injection. This may potentially be exploited by an attacker to run arbitrary code with root-level privileges on the targeted VNX Control Station system, aka remote code execution.

EMC Network Configuration Manager (NCM) 9.3.x, EMC Network Configuration Manager (NCM) 9.4.0.x, EMC Network Configuration Manager (NCM) 9.4.1.x, EMC Network Configuration Manager (NCM) 9.4.2.x contains a Java RMI Remote Code Execution vulnerability that could potentially be exploited by malicious users to compromise the affected system.

EMC Network Configuration Manager (NCM) 9.3.x, EMC Network Configuration Manager (NCM) 9.4.0.x, EMC Network Configuration Manager (NCM) 9.4.1.x, EMC Network Configuration Manager (NCM) 9.4.2.x contains an Improper Authentication vulnerability that could potentially be exploited by malicious users to compromise the affected system.

An issue was discovered in EMC Avamar Server 7.1.x, 7.2.x, 7.3.x, 7.4.x, 7.5.0; EMC NetWorker Virtual Edition (NVE) 9.0.x, 9.1.x, 9.2.x; and EMC Integrated Data Protection Appliance 2.0. A remote unauthenticated malicious user can potentially bypass application authentication and gain unauthorized root access to the affected systems.

EMC Unisphere for VMAX Virtual Appliance (vApp) versions prior to 8.4.0.15, EMC Solutions Enabler Virtual Appliance versions prior to 8.4.0.15, EMC VASA Virtual Appliance versions prior to 8.4.0.512, and EMC VMAX Embedded Management (eManagement) versions prior to and including 1.4 (Enginuity Release 5977.1125.1125 and earlier) contain an authentication bypass vulnerability that may potentially be exploited by malicious users to compromise the affected system.

Unrestricted file upload vulnerability in dmclTrace.jsp in EMC Documentum Administrator 5.3.0.313 and Webtop 5.3.0.317 allows remote attackers to overwrite arbitrary files via the filename attribute.

The vApp Managers web application in EMC Unisphere for VMAX Virtual Appliance 8.x before 8.3.0 and Solutions Enabler Virtual Appliance 8.x before 8.3.0 allows remote attackers to execute arbitrary code via crafted input to the (1) GetSymmCmdRequest or (2) RemoteServiceHandler class.

The Management Console server in EMC NetWorker (formerly Legato NetWorker) 7.3.2 before Jumbo Update 1 uses weak authentication, which allows remote attackers to execute arbitrary commands.

EMC NetWorker 8.2.1.x and 8.2.2.x before 8.2.2.6 and 9.x before 9.0.0.6 mishandles authentication, which allows remote attackers to execute arbitrary commands by leveraging access to a different NetWorker instance.

EMC Unisphere for VMAX 8.x before 8.0.3.4 sets up the Java Debugging Wire Protocol (JDWP) service, which allows remote attackers to execute arbitrary code via unspecified vectors.

EMC Unified Infrastructure Manager/Provisioning (UIM/P) 4.1 allows remote attackers to bypass LDAP authentication by providing a valid account name.

The server in Brocade Network Advisor before 12.1.0, as used in EMC Connectrix Manager Converged Network Edition (CMCNE), HP B-series SAN Network Advisor, and possibly other products, allows remote attackers to execute arbitrary code by using a servlet to upload an executable file.

Multiple unspecified vulnerabilities in Cisco Unified Service Monitor before 8.6, as used in Unified Operations Manager before 8.6 and CiscoWorks LAN Management Solution 3.x and 4.x before 4.1; and multiple EMC Ionix products including Application Connectivity Monitor (Ionix ACM) 2.3 and earlier, Adapter for Alcatel-Lucent 5620 SAM EMS (Ionix ASAM) 3.2.0.2 and earlier, IP Management Suite (Ionix IP) 8.1.1.1 and earlier, and other Ionix products; allow remote attackers to execute arbitrary code via crafted packets to TCP port 9002, aka Bug IDs CSCtn42961 and CSCtn64922, related to a buffer overflow.

Stack-based buffer overflow in ftserver.exe in the OpenText Hummingbird Client Connector, as used in the Indexing Server in EMC Documentum eRoom 7.x before 7.4.3.f and other products, allows remote attackers to execute arbitrary code by sending a crafted message over TCP.

The irccd.exe service in EMC Replication Manager Client before 5.3 and NetWorker Module for Microsoft Applications 2.1.x and 2.2.x allows remote attackers to execute arbitrary commands via the RunProgram function to TCP port 6542.

Multiple heap-based buffer overflows in EMC RepliStor 6.2 before SP5 and 6.3 before SP2 allow remote attackers to execute arbitrary code via a crafted message to (1) ctrlservice.exe or (2) rep_srv.exe, possibly related to an integer overflow.

Stack-based buffer overflow in SAN Manager Master Agent service (aka msragent.exe) in EMC Control Center 5.2 SP5 and 6.0 allows remote attackers to execute arbitrary code via multiple SST_CTGTRANS requests.

Dell EMC RecoverPoint versions prior to 5.1.2 and RecoverPoint for VMs versions prior to 5.1.1.3, contain a command injection vulnerability. An unauthenticated remote attacker may potentially exploit this vulnerability to execute arbitrary commands on the affected system with root privilege.

Integer signedness error in the authentication functionality in librpc.dll in the Informix Storage Manager (ISM) Portmapper service (aka portmap.exe), as used in IBM Informix Dynamic Server (IDS) 10.x before 10.00.TC9 and 11.x before 11.10.TC3 and EMC Legato NetWorker, allows remote attackers to execute arbitrary code via a crafted parameter size that triggers a stack-based buffer overflow.

The Backbone service (ftbackbone.exe) in EMC AutoStart before 5.3 SP2 allows remote attackers to execute arbitrary code via a packet with a crafted value that is dereferenced as a function pointer.

Directory traversal vulnerability in aws_tmxn.exe in the Admin Agent service in the server in EMC Documentum ApplicationXtender Workflow, possibly 5.40 SP1 and earlier, allows remote attackers to upload arbitrary files, and execute arbitrary code, via directory traversal sequences in requests to TCP port 2606.

The RepliStor Server Service in EMC Replistor 6.1.3 allows remote attackers to execute arbitrary code via a size value that causes RepliStor to create a smaller buffer than expected, which triggers a buffer overflow when that buffer is used in a recv function call.

EMC Data Protection Advisor 6.3.x before patch 67 and 6.4.x before patch 130 contains undocumented accounts with hard-coded passwords and various privileges. Affected accounts are: "Apollo System Test", "emc.dpa.agent.logon" and "emc.dpa.metrics.logon". An attacker with knowledge of the password could potentially use these accounts via REST APIs to gain unauthorized access to EMC Data Protection Advisor (including potentially access with administrative privileges).

EMC ESRS Policy Manager prior to 6.8 contains an undocumented account (OpenDS admin) with a default password. A remote attacker with the knowledge of the default password may login to the system and gain administrator privileges to the local LDAP directory server.

EMC AppSync Server prior to 3.5.0.1 contains database accounts with hardcoded passwords that could potentially be exploited by malicious users to compromise the affected system.

Dell EMC Data Protection Advisor versions prior to 6.3 Patch 159 and Dell EMC Data Protection Advisor versions prior to 6.4 Patch 110 contain a hardcoded database account with administrative privileges. The affected account is "apollosuperuser." An attacker with local access to the server where DPA Datastore Service is installed and knowledge of the password may potentially gain unauthorized access to the database. Note: The Datastore Service database cannot be accessed remotely using this account.

Out of the wired and wireless interfaces within MiR100, MiR200 and other vehicles from the MiR fleet, it's possible to access the Control Dashboard on a hardcoded IP address. Credentials to such wireless interface default to well known and widely spread users (omitted) and passwords (omitted). This information is also available in past User Guides and manuals which the vendor distributed. This flaw allows cyber attackers to take control of the robot remotely and make use of the default user interfaces MiR has created, lowering the complexity of attacks and making them available to entry-level attackers. More elaborated attacks can also be established by clearing authentication and sending network requests directly. We have confirmed this flaw in MiR100 and MiR200 but according to the vendor, it might also apply to MiR250, MiR500 and MiR1000.

Battelle V2I Hub 2.5.1 contains hard-coded credentials for the administrative account. An attacker could exploit this vulnerability to log in as an admin on any installation and gain unauthorized access to the system.

Yokogawa STARDOM FCJ controllers R4.02 and prior, FCN-100 controllers R4.02 and prior, FCN-RTU controllers R4.02 and prior, and FCN-500 controllers R4.02 and prior utilize hard-coded credentials that could allow an attacker to gain unauthorized administrative access to the device, which could result in remote code execution.

SOUND4 IMPACT/FIRST/PULSE/Eco versions 2.x and below contain hardcoded credentials embedded in server binaries that cannot be modified through normal device operations. Attackers can leverage these static credentials to gain unauthorized access to the device across Linux and Windows distributions without requiring user interaction.

A vulnerability in Cisco IOS XE Software could allow an unauthenticated, remote attacker to log in to a device running an affected release of Cisco IOS XE Software with the default username and password that are used at initial boot, aka a Static Credential Vulnerability. The vulnerability is due to an undocumented user account with privilege level 15 that has a default username and password. An attacker could exploit this vulnerability by using this account to remotely connect to an affected device. A successful exploit could allow the attacker to log in to the device with privilege level 15 access. This vulnerability affects Cisco devices that are running a vulnerable release of Cisco IOS XE Software Release 16.x. This vulnerability does not affect Cisco IOS XE Software releases prior to Release 16.x. Cisco Bug IDs: CSCve89880.

Juniper Networks Contrail Service Orchestrator versions prior to 4.0.0 use hardcoded cryptographic certificates and keys in some cases, which may allow network based attackers to gain unauthorized access to services.

A vulnerability in Cisco Digital Network Architecture (DNA) Center could allow an unauthenticated, remote attacker to log in to an affected system by using an administrative account that has default, static user credentials. The vulnerability is due to the presence of undocumented, static user credentials for the default administrative account for the affected software. An attacker could exploit this vulnerability by using the account to log in to an affected system. A successful exploit could allow the attacker to log in to the affected system and execute arbitrary commands with root privileges. This vulnerability affects all releases of Cisco DNA Center Software prior to Release 1.1.3. Cisco Bug IDs: CSCvh98929.

A vulnerability has been identified in SIMATIC CN 4100 (All versions < V4.0.1). The affected device stores sensitive information in the firmware. This could allow an attacker to access and misuse this information, potentially impacting the device’s confidentiality, integrity, and availability.

Gessler GmbH WEB-MASTER has a restoration account that uses weak hard coded credentials and if exploited could allow an attacker control over the web management of the device.

Because of hard-coded SSH keys for the root user in Amino Communications AK45x series, AK5xx series, AK65x series, Aria6xx series, Aria7/AK7Xx series, Kami7B, an attacker may remotely log in through SSH.

On BE126 WIFI repeater 1.0 devices, an attacker can log into telnet (which is open by default) with default credentials as root (username:"root" password:"root") and can: 1. Read the entire file system; 2. Write to the file system; or 3. Execute any code that attacker desires (malicious or not).

INPRAX "iZZi connect" application on Android contains hard-coded MQTT queue credentials. The same MQTT queue is used by corresponding physical recuperation devices. Exploiting this vulnerability could potentially allow unauthorized access to manage and read parameters of the recuperation unit "reQnet iZZi".This issue affects "iZZi connect" application versions before 2024010401.

On BE126 WIFI repeater 1.0 devices, an attacker can log into telnet (which is open by default) with default credentials as root (username:"root" password:"root"). The attacker can make a user that is connected to the repeater click on a malicious link that will log into the telnet and will infect the device with malicious code.

The vulnerability of hard-coded default credentials in QSAN SANOS allows unauthenticated remote attackers to obtain administrator’s permission and execute arbitrary functions. The referred vulnerability has been solved with the updated version of QSAN SANOS v2.1.0.

Missing Authentication, Files or Directories Accessible to External Parties, Use of Hard-coded Credentials vulnerability in Talya Informatics Elektraweb allows Authentication Bypass.This issue affects Elektraweb: before v17.0.68.

An issue was discovered on D-Link DCS-1100 and DCS-1130 devices. The device has a custom telnet daemon as a part of the busybox and retrieves the password from the shadow file using the function getspnam at address 0x00053894. Then performs a crypt operation on the password retrieved from the user at address 0x000538E0 and performs a strcmp at address 0x00053908 to check if the password is correct or incorrect. However, the /etc/shadow file is a part of CRAM-FS filesystem which means that the user cannot change the password and hence a hardcoded hash in /etc/shadow is used to match the credentials provided by the user. This is a salted hash of the string "admin" and hence it acts as a password to the device which cannot be changed as the whole filesystem is read only.

Wireless IP Camera (P2P) WIFICAM devices have a backdoor root account that can be accessed with TELNET.

EMC ViPR SRM, EMC Storage M&R, EMC VNX M&R, EMC M&R for SAS Solution Packs (EMC ViPR SRM prior to 4.1, EMC Storage M&R prior to 4.1, EMC VNX M&R all versions, EMC M&R (Watch4Net) for SAS Solution Packs all versions) contain undocumented accounts with default passwords for Webservice Gateway and RMI JMX components. A remote attacker with the knowledge of the default password may potentially use these accounts to run arbitrary web service and remote procedure calls on the affected system.

Vasion Print (formerly PrinterLogic) Virtual Appliance Host versions prior to 22.0.951 and Application prior to 20.0.2368 (VA and SaaS deployments) contain shared, hardcoded SSH host private keys in the appliance image. The same private host keys (RSA, ECDSA, and ED25519) are present across installations, rather than being uniquely generated per appliance. An attacker who obtains these private keys (for example from one compromised appliance image or another installation) can impersonate the appliance, decrypt or intercept SSH connections to appliances that use the same keys, and perform man-in-the-middle or impersonation attacks against administrative SSH sessions. This vulnerability has been identified by the vendor as: V-2024-011 — Hardcoded SSH Host Key.

ShineLan-X contains a set of credentials for an FTP server was found within the firmware, allowing testers to establish an insecure FTP connection with the server. This may allow an attacker to replace legitimate files being deployed to devices with their own malicious versions, since the firmware signature verification is not enforced.

Unitronics VisiLogic before version 9.9.00, used in Vision and Samba PLCs and HMIs, uses a default administrative password. An unauthenticated attacker with network access can take administrative control of a vulnerable system.