The web administration interface on ZyXEL NBG-418N devices with firmware 1.00(AADZ.3)C0 has a default password of 1234 for the admin account, which allows remote attackers to obtain administrative privileges by leveraging a LAN session.

The web management interface on Belkin F9K1102 2 devices with firmware 2.10.17 has a blank password, which allows remote attackers to obtain administrative privileges by leveraging a LAN session.

Multiple cross-site request forgery (CSRF) vulnerabilities in the web management interface in the ZyXEL P-330W router allow remote attackers to hijack the authentication of administrators for requests that (1) enable remote router management via goform/formRmtMgt or (2) modify the administrator password via goform/formPasswordSetup.

An authentication bypasss vulnerability in the web-based management interface of Zyxel USG/Zywall series firmware versions 4.35 through 4.64 and USG Flex, ATP, and VPN series firmware versions 4.35 through 5.01, which could allow a remote attacker to execute arbitrary commands on an affected device.

An issue was discovered on Zyxel GS1900 devices with firmware before 2.50(AAHH.0)C0. Through an undocumented sequence of keypresses, undocumented functionality is triggered. A diagnostics shell is triggered via CTRL-ALT-t, which prompts for the password returned by fds_sys_passDebugPasswd_ret(). The firmware contains access control checks that determine if remote users are allowed to access this functionality. The function that performs this check (fds_sys_remoteDebugEnable_ret in libfds.so) always return TRUE with no actual checks performed. The diagnostics menu allows for reading/writing arbitrary registers and various other configuration parameters which are believed to be related to the network interface chips.

A vulnerability in specific versions of Zyxel NBG6818, NBG7815, WSQ20, WSQ50, WSQ60, and WSR30 firmware with pre-configured password management could allow an attacker to obtain root access of the device, if the local attacker dismantles the device and uses a USB-to-UART cable to connect the device, or if the remote assistance feature had been enabled by an authenticated user.

**UNSUPPORTED WHEN ASSIGNED** The improper authentication vulnerability in the Zyxel P-6101C ADSL modem firmware version P-6101CSA6AP_20140331 could allow an unauthenticated attacker to read some device information via a crafted HTTP HEAD method.

The Openfire server in Cisco Finesse Desktop 10.5(1) and 11.0(1) and Unified Contact Center Express 10.6(1) has a hardcoded account, which makes it easier for remote attackers to obtain access via an XMPP session, aka Bug ID CSCuw79085.

A flaw in the Zyxel LTE3301-M209 firmware verisons prior to V1.00(ABLG.6)C0 could allow a remote attacker to access the device using an improper pre-configured password if the remote administration feature has been enabled by an authenticated administrator.

Cisco NX-OS 6.0(2)U6(1) through 6.0(2)U6(5) on Nexus 3000 devices and 6.0(2)A6(1) through 6.0(2)A6(5) and 6.0(2)A7(1) on Nexus 3500 devices has hardcoded credentials, which allows remote attackers to obtain root privileges via a (1) TELNET or (2) SSH session, aka Bug ID CSCuy25800.

Certain Zyxel products have a locally accessible binary that allows a non-root user to generate a password for an undocumented user account that can be used for a TELNET session as root. This affects NAS520 V5.21(AASZ.4)C0, V5.21(AASZ.0)C0, V5.11(AASZ.3)C0, and V5.11(AASZ.0)C0; NAS542 V5.11(ABAG.0)C0, V5.20(ABAG.1)C0, and V5.21(ABAG.3)C0; NSA325 v2_V4.81(AALS.0)C0 and V4.81(AAAJ.1)C0; NSA310 4.22(AFK.0)C0 and 4.22(AFK.1)C0; NAS326 V5.21(AAZF.8)C0, V5.11(AAZF.4)C0, V5.11(AAZF.2)C0, and V5.11(AAZF.3)C0; NSA310S V4.75(AALH.2)C0; NSA320S V4.75(AANV.2)C0 and V4.75(AANV.1)C0; NSA221 V4.41(AFM.1)C0; and NAS540 V5.21(AATB.5)C0 and V5.21(AATB.3)C0.

The ZyXEL Wireless N300 NetUSB NBG-419N router with firmware 1.00(BFQ.6)C0 allows remote attackers to bypass authentication by using %2F sequences in place of / (slash) characters.

ZyXEL Prestige routers, including P-660, P-661, and P-662 models with firmware 3.40(AGD.2) through 3.40(AHQ.3), allow remote authenticated users to obtain authentication data by making direct HTTP requests and then reading the HTML source, as demonstrated by a request for (1) RemMagSNMP.html, which discloses SNMP communities; or (2) WLAN.html, which discloses WEP keys.

An authentication bypass vulnerability in the CGI program of Zyxel USG/ZyWALL series firmware versions 4.20 through 4.70, USG FLEX series firmware versions 4.50 through 5.20, ATP series firmware versions 4.32 through 5.20, VPN series firmware versions 4.30 through 5.20, and NSG series firmware versions V1.20 through V1.33 Patch 4, which could allow an attacker to bypass the web authentication and obtain administrative access of the device.

A downgrade from two-factor authentication to one-factor authentication vulnerability in the CGI program of Zyxel USG/ZyWALL series firmware versions 4.32 through 4.71, USG FLEX series firmware versions 4.50 through 5.21, ATP series firmware versions 4.32 through 5.21, and VPN series firmware versions 4.32 through 5.21, that could allow an authenticated attacker to bypass the second authentication phase to connect the IPsec VPN server even though the two-factor authentication (2FA) was enabled.

An improper authentication vulnerability in the authentication module of the Zyxel NAS326 firmware version V5.21(AAZF.14)C0 and NAS542 firmware version V5.21(ABAG.11)C0 could allow an unauthenticated attacker to obtain system information by sending a crafted URL to a vulnerable device.

On Zyxel NBG2105 V1.00(AAGU.2)C0 devices, setting the login cookie to 1 provides administrator access.

An issue was discovered in ABOOT in OnePlus 3 and 3T OxygenOS before 4.0.2. The attacker can reboot the device into the fastboot mode, which could be done without any authentication. A physical attacker can press the "Volume Up" button during device boot, where an attacker with ADB access can issue the adb reboot bootloader command. Then, the attacker can put the platform's SELinux in permissive mode, which severely weakens it, by issuing: fastboot oem selinux permissive.

D-Link DIR-505L SharePort Mobile Companion 1.01 and DIR-826L Wireless N600 Cloud Router 1.02 allows remote attackers to bypass authentication via a direct request when an authorized session is active.

ajax.cgi in the web interface on the Choice Wireless Green Packet WIXFMR-111 4G WiMax modem allows remote attackers to execute arbitrary commands via shell metacharacters in the pip parameter in an Ajax tag_ipPing request, a different vulnerability than CVE-2013-3581.

Belkin N900 router (F9K1104v1) contains an Authentication Bypass using "Javascript debugging".

The EAP-FAST authentication module in Cisco Secure Access Control Server (ACS) 4.x before 4.2.1.15.11, when a RADIUS server configuration is enabled, does not properly parse user identities, which allows remote attackers to execute arbitrary commands via crafted EAP-FAST packets, aka Bug ID CSCui57636.

EMC Smarts Network Configuration Manager (NCM) before 9.2 does not require authentication for all Java RMI method calls, which allows remote attackers to execute arbitrary code via unspecified vectors.

The Web server password authentication mechanism used by the products is vulnerable to a MitM and Replay attack. Successful exploitation of this vulnerability will allow unauthorized access of the product’s Web server to view and alter product configuration and diagnostics information. Rockwell Automation EtherNet/IP products; 1756-ENBT, 1756-EWEB, 1768-ENBT, and 1768-EWEB communication modules; CompactLogix L32E and L35E controllers; 1788-ENBT FLEXLogix adapter; 1794-AENTR FLEX I/O EtherNet/IP adapter; ControlLogix 18 and earlier; CompactLogix 18 and earlier; GuardLogix 18 and earlier; SoftLogix 18 and earlier; CompactLogix controllers 19 and earlier; SoftLogix controllers 19 and earlier; ControlLogix controllers 20 and earlier; GuardLogix controllers 20 and earlier; and MicroLogix 1100 and 1400

An issue was discovered in certain Apple products. macOS High Sierra before Security Update 2017-001 is affected. The issue involves the "Directory Utility" component. It allows attackers to obtain administrator access without a password via certain interactions involving entry of the root user name.

The default configuration of EMC Smarts Network Configuration Manager (NCM) before 9.1 does not require authentication for database access, which allows remote attackers to have an unspecified impact via a network session.

Networking OS10, versions prior to October 2021 with Smart Fabric Services enabled, contains an authentication bypass vulnerability. A remote unauthenticated attacker could exploit this vulnerability to gain access and perform actions on the affected system.

A vulnerability in the TACACS+ authentication, authorization and accounting (AAA) feature of Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an unauthenticated, remote attacker to bypass authentication and log in to an affected device as an administrator. This vulnerability is due to incomplete validation of user-supplied input that is passed to an authentication script. An attacker could exploit this vulnerability by injecting parameters into an authentication request. A successful exploit could allow the attacker to bypass authentication and log in as an administrator to the affected device.

Intel Alert Management System (aka AMS or AMS2), as used in Symantec Antivirus Corporate Edition (SAVCE) 10.x before 10.1 MR10, Symantec System Center (SSC) 10.x, and Symantec Quarantine Server 3.5 and 3.6, allows remote attackers to execute arbitrary commands via crafted messages over TCP, as discovered by Junaid Bohio, a different vulnerability than CVE-2010-0110 and CVE-2010-0111. NOTE: some of these details are obtained from third party information.

The Remote Console in IBM Lotus Domino, when a certain unsupported configuration involving UNC share pathnames is used, allows remote attackers to bypass authentication and execute arbitrary code via unspecified vectors, aka SPR PRAD89WGRS.

The Update Installer in VMware ESXi 4.1, when a modified sfcb.cfg is present, does not properly configure the SFCB authentication mode, which allows remote attackers to obtain access via an arbitrary username and password.

Open&Compact FTP Server (Open-FTPD) 1.2 and earlier allows remote attackers to bypass authentication by sending (1) LIST, (2) RETR, (3) STOR, or other commands without performing the required login steps first.

HTTP server for Cisco IOS 11.3 to 12.2 allows attackers to bypass authentication and execute arbitrary commands, when local authorization is being used, by specifying a high access level in the URL.

The base-files package before 5.0.0ubuntu7.1 on Ubuntu 9.10 and before 5.0.0ubuntu20.10.04.2 on Ubuntu 10.04 LTS, as shipped on Dell Latitude 2110 netbooks, does not require authentication for package installation, which allows remote archive servers and man-in-the-middle attackers to execute arbitrary code via a crafted package.

The pam_lsass library in Likewise Open 5.4 and CIFS 5.4 before build 8046, and 6.0 before build 8234, as used in HP StorageWorks X9000 Network Storage Systems and possibly other products, uses "SetPassword logic" when running as part of a root service, which allows remote attackers to bypass authentication for a Likewise Security Authority (lsassd) account whose password is marked as expired.

The SSH USERAUTH CHANGE REQUEST feature in SSH Tectia Server 6.0.4 through 6.0.20, 6.1.0 through 6.1.12, 6.2.0 through 6.2.5, and 6.3.0 through 6.3.2 on UNIX and Linux, when old-style password authentication is enabled, allows remote attackers to bypass authentication via a crafted session involving entry of blank passwords, as demonstrated by a root login session from a modified OpenSSH client with an added input_userauth_passwd_changereq call in sshconnect2.c.

pam-auth-update for PAM, as used in Ubuntu 8.10 and 9.4, and Debian GNU/Linux, does not properly handle an "empty selection" for system authentication modules in certain rare configurations, which causes any attempt to be successful and allows remote attackers to bypass authentication.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business 220 Series Smart Switches could allow an attacker to do the following: Hijack a user session Execute arbitrary commands as a root user on the underlying operating system Conduct a cross-site scripting (XSS) attack Conduct an HTML injection attack For more information about these vulnerabilities, see the Details section of this advisory.

The Basic authentication code in WEBrick library in Ruby before 2.2.8, 2.3.x before 2.3.5, and 2.4.x through 2.4.1 allows remote attackers to inject terminal emulator escape sequences into its log and possibly execute arbitrary commands via a crafted user name.

In resetPasswordInternal of DevicePolicyManagerService.java, there is a possible bypass of password reset protection due to an unusual root cause. Remote user interaction is needed for exploitation.Product: AndroidVersions: Android-8.1 Android-9Android ID: A-110172241

Due to the lack of firmware authentication in the upgrade process of T&W WIFI Repeater BE126 devices, an attacker can craft a malicious firmware and use it as an update.

Session fixation vulnerability in Mambo 4.6.2 CMS allows remote attackers to hijack web sessions by setting the Cookie parameter.

Johnson & Johnson Animas OneTouch Ping devices allow remote attackers to bypass authentication via replay attacks.

A vulnerability has been identified in SIMATIC IT LMS (All versions), SIMATIC IT Production Suite (Versions V7.1 < V7.1 Upd3), SIMATIC IT UA Discrete Manufacturing (Versions < V1.2), SIMATIC IT UA Discrete Manufacturing (Versions V1.2), SIMATIC IT UA Discrete Manufacturing (Versions V1.3), SIMATIC IT UA Discrete Manufacturing (Versions V2.3), SIMATIC IT UA Discrete Manufacturing (Versions V2.4). An attacker with network access to the installation could bypass the application-level authentication. In order to exploit the vulnerability, an attacker must obtain network access to an affected installation and must obtain a valid username to the system. Successful exploitation requires no user privileges and no user interaction. The vulnerability could allow an attacker to compromise confidentiality, integrity and availability of the system. At the time of advisory publication no public exploitation of this vulnerability was known.

Johnson & Johnson Animas OneTouch Ping devices mishandle acknowledgements, which makes it easier for remote attackers to bypass authentication via a custom communication protocol.

Intelbras NPLUG 1.0.0.14 wireless repeater devices have a critical vulnerability that allows an attacker to authenticate in the web interface just by using "admin:" as the name of a cookie.

If RSH service is enabled on Junos OS and if the PAM authentication is disabled, a remote unauthenticated attacker can obtain root access to the device. RSH service is disabled by default on Junos. There is no documented CLI command to enable this service. However, an undocumented CLI command allows a privileged Junos user to enable RSH service and disable PAM, and hence expose the system to unauthenticated root access. When RSH is enabled, the device is listing to RSH connections on port 514. This issue is not exploitable on platforms where Junos release is based on FreeBSD 10+. Affected releases are Juniper Networks Junos OS: 12.1X46 versions prior to 12.1X46-D77 on SRX Series; 12.3 versions prior to 12.3R12-S10; 12.3X48 versions prior to 12.3X48-D75 on SRX Series; 14.1X53 versions prior to 14.1X53-D47 on QFX/EX Series; 15.1 versions prior to 15.1R4-S9, 15.1R6-S6, 15.1R7; 15.1X49 versions prior to 15.1X49-D131, 15.1X49-D140 on SRX Series; 15.1X53 versions prior to 15.1X53-D59 on EX2300/EX3400 Series; 15.1X53 versions prior to 15.1X53-D67 on QFX10K Series; 15.1X53 versions prior to 15.1X53-D233 on QFX5200/QFX5110 Series; 15.1X53 versions prior to 15.1X53-D471, 15.1X53-D490 on NFX Series; 16.1 versions prior to 16.1R3-S9, 16.1R4-S9, 16.1R5-S4, 16.1R6-S4, 16.1R7; 16.2 versions prior to 16.2R2-S5; 17.1 versions prior to 17.1R1-S7, 17.1R2-S7, 17.1R3; 17.2 versions prior to 17.2R1-S6, 17.2R2-S4, 17.2R3; 17.2X75 versions prior to 17.2X75-D110, 17.2X75-D91; 17.3 versions prior to 17.3R1-S4, 17.3R2-S2, 17.3R3; 17.4 versions prior to 17.4R1-S3, 17.4R2; 18.2X75 versions prior to 18.2X75-D5.

Sauter EY-WS505F0x0 moduWeb Vision before 1.6.0 allows remote attackers to bypass authentication by leveraging knowledge of a password hash without knowledge of the associated password.

FortiOS 5.2.3, when configured to use High Availability (HA) and the dedicated management interface is enabled, does not require authentication for access to the ZebOS shell on the HA dedicated management interface, which allows remote attackers to obtain shell access via unspecified vectors.

Unknown vulnerability in Cisco Catalyst 7.5(1) allows local users to bypass authentication and gain access to the enable mode without a password.