A vulnerability in the TCP connection handling functionality of Cisco Remote Expert Manager Software 11.0.0 could allow an unauthenticated, remote attacker to disable TCP ports and cause a denial of service (DoS) condition on an affected system. The vulnerability is due to a lack of rate-limiting functionality in the TCP Listen application of the affected software. An attacker could exploit this vulnerability by sending a crafted TCP traffic stream in which specific types of TCP packets are flooded to an affected device, for example a TCP packet stream in which the TCP FIN bit is set in all the TCP packets. A successful exploit could allow the attacker to cause certain TCP listening ports on the affected system to stop accepting incoming connections for a period of time or until the affected device is restarted, resulting in a DoS condition. In addition, system resources, such as CPU and memory, could be exhausted during the attack. Cisco Bug IDs: CSCva29806.

The IronPort Spam Quarantine (ISQ) component in the web framework in IronPort AsyncOS on Cisco Email Security Appliance devices before 7.1.5-106 and 7.3, 7.5, and 7.6 before 7.6.3-019 and Content Security Management Appliance devices before 7.9.1-102 and 8.0 before 8.0.0-404 allows remote attackers to cause a denial of service (service crash or hang) via a high rate of TCP connection attempts, aka Bug IDs CSCzv25573 and CSCzv81712.

Cisco Adaptive Security Appliances (ASA) 5500 series devices with software 8.2 and 8.4, when SIP inspection is enabled, create many identical pre-allocated secondary pinholes, which might allow remote attackers to cause a denial of service (CPU consumption) via crafted SIP traffic, aka Bug ID CSCtz63143.

A vulnerability in the HTTP remote procedure call (RPC) service of set-top box (STB) receivers manufactured by Cisco for Yes could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability exists because the firmware of an affected device fails to handle certain XML values that are passed to the HTTP RPC service listening on the local subnet of the device. An attacker could exploit this vulnerability by submitting a malformed request to an affected device. A successful attack could cause the affected device to restart, resulting in a DoS condition. Yes has updated the affected devices with firmware that addresses this vulnerability. Customers are not required to take action. Vulnerable Products: This vulnerability affects YesMaxTotal, YesMax HD, and YesQuattro STB devices. Cisco Bug IDs: CSCvd08812.

A vulnerability in the Secure Sockets Layer (SSL) and Transport Layer Security (TLS) code of Cisco ASA Software could allow an unauthenticated, remote attacker to cause a reload of the affected system. The vulnerability is due to improper parsing of crafted SSL or TLS packets. An attacker could exploit this vulnerability by sending a crafted packet to the affected system. Note: Only traffic directed to the affected system can be used to exploit this vulnerability. This vulnerability affects systems configured in routed and transparent firewall mode and in single or multiple context mode. This vulnerability can be triggered by IPv4 and IPv6 traffic. A valid SSL or TLS session is needed to exploit this vulnerability. This vulnerability affects Cisco ASA Software running on the following products: Cisco ASA 1000V Cloud Firewall, Cisco ASA 5500 Series Adaptive Security Appliances, Cisco ASA 5500-X Series Next-Generation Firewalls, Cisco ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Cisco Adaptive Security Virtual Appliance (ASAv), Cisco Firepower 9300 ASA Security Module, Cisco ISA 3000 Industrial Security Appliance. Fixed versions: 8.4(7.31) 9.0(4.39) 9.1(7) 9.2(4.6) 9.3(3.8) 9.4(2) 9.5(2). Cisco Bug IDs: CSCuv48243.

Cisco Intrusion Prevention System (IPS) Software on IPS NME devices before 7.0(9)E4 allows remote attackers to cause a denial of service (device reload) via malformed IPv4 packets that trigger incorrect memory allocation, aka Bug ID CSCua61977.

Multiple vulnerabilities in the EnergyWise module of Cisco IOS (12.2 and 15.0 through 15.6) and Cisco IOS XE (3.2 through 3.18) could allow an unauthenticated, remote attacker to cause a buffer overflow condition or a reload of an affected device, leading to a denial of service (DoS) condition. These vulnerabilities are due to improper parsing of crafted EnergyWise packets destined to an affected device. An attacker could exploit these vulnerabilities by sending crafted EnergyWise packets to be processed by an affected device. An exploit could allow the attacker to cause a buffer overflow condition or a reload of the affected device, leading to a DoS condition. Cisco IOS Software and Cisco IOS XE Software support EnergyWise for IPv4 communication. Only IPv4 packets destined to a device configured as an EnergyWise domain member can trigger these vulnerabilities. IPv6 packets cannot be used to trigger these vulnerabilities. Cisco Bug ID CSCut47751.

A vulnerability in the Session Initiation Protocol (SIP) UDP throttling process of Cisco Unified Communications Manager (Cisco Unified CM) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to insufficient rate limiting protection. An attacker could exploit this vulnerability by sending the affected device a high rate of SIP messages. An exploit could allow the attacker to cause the device to reload unexpectedly. The device and services will restart automatically. This vulnerability affects Cisco Unified Communications Manager (CallManager) releases prior to the first fixed release; the following list indicates the first minor release that includes the fix for this vulnerability: 10.5.2.14900-16 11.0.1.23900-5 11.5.1.12900-2. Cisco Bug IDs: CSCuz72455.

A vulnerability in the web user interface of Cisco IOS XE 3.1 through 3.17 could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability is due to insufficient resource handling by the affected software when the web user interface is under a high load. An attacker could exploit this vulnerability by sending a high number of requests to the web user interface of the affected software. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition. To exploit this vulnerability, the attacker must have access to the management interface of the affected software, which is typically connected to a restricted management network. This vulnerability affects Cisco devices that are running a vulnerable release of Cisco IOS XE Software, if the web user interface of the software is enabled. By default, the web user interface is not enabled. Cisco Bug IDs: CSCup70353.

A vulnerability in the Event Management Service daemon (emsd) of Cisco IOS XR routers could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on the affected device. The vulnerability is due to improper handling of gRPC requests. An attacker could exploit this vulnerability by repeatedly sending unauthenticated gRPC requests to the affected device. A successful exploit could allow the attacker to crash the device in such a manner that manual intervention is required to recover. This vulnerability affects all Cisco IOS XR platforms that are running release 6.1.1 of Cisco IOS XR Software when the gRPC service is enabled on the device. The gRPC service is not enabled by default. Cisco Bug IDs: CSCvb14441.

Multiple vulnerabilities in the EnergyWise module of Cisco IOS (12.2 and 15.0 through 15.6) and Cisco IOS XE (3.2 through 3.18) could allow an unauthenticated, remote attacker to cause a buffer overflow condition or a reload of an affected device, leading to a denial of service (DoS) condition. These vulnerabilities are due to improper parsing of crafted EnergyWise packets destined to an affected device. An attacker could exploit these vulnerabilities by sending crafted EnergyWise packets to be processed by an affected device. An exploit could allow the attacker to cause a buffer overflow condition or a reload of the affected device, leading to a DoS condition. Cisco IOS Software and Cisco IOS XE Software support EnergyWise for IPv4 communication. Only IPv4 packets destined to a device configured as an EnergyWise domain member can trigger these vulnerabilities. IPv6 packets cannot be used to trigger these vulnerabilities. Cisco Bug ID CSCur29331.

A vulnerability in the web management interface of Cisco Wireless LAN Controller (WLC) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to a missing internal handler for the specific request. An attacker could exploit this vulnerability by accessing a specific hidden URL on the GUI web management interface. A successful exploit could allow the attacker to cause a reload of the device, resulting in a DoS condition. This vulnerability affects only the Cisco Wireless LAN Controller 8.3.102.0 release. Cisco Bug IDs: CSCvb48198.

A vulnerability in the DHCP client implementation of Cisco IOS (12.2, 12.4, and 15.0 through 15.6) and Cisco IOS XE (3.3 through 3.7) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability occurs during the parsing of a crafted DHCP packet. An attacker could exploit this vulnerability by sending crafted DHCP packets to an affected device that is configured as a DHCP client. A successful exploit could allow the attacker to cause a reload of an affected device, resulting in a DoS condition. This vulnerability affects Cisco devices that are running a vulnerable release of Cisco IOS or IOS XE Software and using a specific DHCP client configuration. Cisco Bug IDs: CSCuu43892.

Multiple vulnerabilities in the EnergyWise module of Cisco IOS (12.2 and 15.0 through 15.6) and Cisco IOS XE (3.2 through 3.18) could allow an unauthenticated, remote attacker to cause a buffer overflow condition or a reload of an affected device, leading to a denial of service (DoS) condition. These vulnerabilities are due to improper parsing of crafted EnergyWise packets destined to an affected device. An attacker could exploit these vulnerabilities by sending crafted EnergyWise packets to be processed by an affected device. An exploit could allow the attacker to cause a buffer overflow condition or a reload of the affected device, leading to a DoS condition. Cisco IOS Software and Cisco IOS XE Software support EnergyWise for IPv4 communication. Only IPv4 packets destined to a device configured as an EnergyWise domain member can trigger these vulnerabilities. IPv6 packets cannot be used to trigger these vulnerabilities. Cisco Bug ID CSCuu76493.

A vulnerability in the DHCP code for the Zero Touch Provisioning feature of Cisco ASR 920 Series Aggregation Services Routers could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability is due to a format string vulnerability when processing a crafted DHCP packet for Zero Touch Provisioning. An attacker could exploit this vulnerability by sending a specially crafted DHCP packet to an affected device. An exploit could allow the attacker to cause the device to reload, resulting in a denial of service (DoS) condition. This vulnerability affects Cisco ASR 920 Series Aggregation Services Routers that are running an affected release of Cisco IOS XE Software (3.13 through 3.18) and are listening on the DHCP server port. By default, the devices do not listen on the DHCP server port. Cisco Bug IDs: CSCuy56385.

Cisco NX-OS 4.2, 5.0, 5.1, and 5.2 on Nexus 7000 series switches, when the High Availability (HA) policy is configured for Reset, allows remote attackers to cause a denial of service (device reset) via a malformed Cisco Discovery Protocol (CDP) packet, aka Bug IDs CSCtk34535 and CSCtk19132.

Cisco IOS 12.3 and 12.4 on Aironet access points allows remote attackers to cause a denial of service (radio-interface input-queue hang) via IAPP 0x3281 packets, aka Bug ID CSCtc12426.

The Multicast Source Discovery Protocol (MSDP) implementation in Cisco IOS 12.0, 12.2 through 12.4, and 15.0 through 15.2 and IOS XE 2.1.x through 2.6.x and 3.1.xS through 3.4.xS before 3.4.1S and 3.1.xSG and 3.2.xSG before 3.2.2SG allows remote attackers to cause a denial of service (device reload) via encapsulated IGMP data in an MSDP packet, aka Bug ID CSCtr28857.

Cisco TelePresence Video Communication Server with software before X7.0.1 allows remote attackers to cause a denial of service (device crash) via a malformed SIP message, aka Bug ID CSCtr20426.

Multiple vulnerabilities in the EnergyWise module of Cisco IOS (12.2 and 15.0 through 15.6) and Cisco IOS XE (3.2 through 3.18) could allow an unauthenticated, remote attacker to cause a buffer overflow condition or a reload of an affected device, leading to a denial of service (DoS) condition. These vulnerabilities are due to improper parsing of crafted EnergyWise packets destined to an affected device. An attacker could exploit these vulnerabilities by sending crafted EnergyWise packets to be processed by an affected device. An exploit could allow the attacker to cause a buffer overflow condition or a reload of the affected device, leading to a DoS condition. Cisco IOS Software and Cisco IOS XE Software support EnergyWise for IPv4 communication. Only IPv4 packets destined to a device configured as an EnergyWise domain member can trigger these vulnerabilities. IPv6 packets cannot be used to trigger these vulnerabilities. Cisco Bug ID CSCut50727.

The Cisco Cius with software before 9.2(1) SR2 allows remote attackers to cause a denial of service (device crash or hang) via malformed network traffic, aka Bug ID CSCto71445.

A vulnerability in the Layer 2 Tunneling Protocol (L2TP) parsing function of Cisco IOS (12.0 through 12.4 and 15.0 through 15.6) and Cisco IOS XE (3.1 through 3.18) could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability is due to insufficient validation of L2TP packets. An attacker could exploit this vulnerability by sending a crafted L2TP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition. This vulnerability affects Cisco devices that are running a vulnerable release of Cisco IOS or Cisco IOS XE Software if the L2TP feature is enabled for the device and the device is configured as an L2TP Version 2 (L2TPv2) or L2TP Version 3 (L2TPv3) endpoint. By default, the L2TP feature is not enabled. Cisco Bug IDs: CSCuy82078.

Memory leak in the SIP inspection feature in the Zone-Based Firewall in Cisco IOS 12.4, 15.0, 15.1, and 15.2 allows remote attackers to cause a denial of service (memory consumption or device reload) via crafted transit SIP traffic, aka Bug ID CSCti46171.

Cisco Wireless LAN Controller (WLC) devices with software 6.0 and 7.0 before 7.0.220.0, 7.1 before 7.1.91.0, and 7.2 before 7.2.103.0 allow remote attackers to cause a denial of service (device reload) via a sequence of IPv6 packets, aka Bug ID CSCtt07949.

The administrative management interface on Cisco Wireless LAN Controller (WLC) devices with software 4.x, 5.x, 6.0, and 7.0 before 7.0.220.0, 7.1 before 7.1.91.0, and 7.2 before 7.2.103.0 allows remote attackers to cause a denial of service (device crash) via a malformed URL in an HTTP request, aka Bug ID CSCts81997.

A vulnerability in the memory management of Cisco Adaptive Security Appliance (ASA) Software and Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper resource management when connection rates are high. An attacker could exploit this vulnerability by opening a significant number of connections on an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition.

Cisco Unity Connection (UC) 8.6, 9.0, and 9.5 allows remote attackers to cause a denial of service (CPU consumption) via malformed UDP packets, aka Bug ID CSCtz76269.

Cisco Intrusion Prevention System (IPS) Software in ASA 5500-X IPS-SSP software modules before 7.1(7)sp1E4 allows remote attackers to cause a denial of service (Analysis Engine process hang or device reload) via fragmented (1) IPv4 or (2) IPv6 packets, aka Bug ID CSCue51272.

Unspecified vulnerability in Cisco IOS 15.0 through 15.1, in certain HTTP Layer 7 Application Control and Inspection configurations, allows remote attackers to cause a denial of service (device reload or hang) via a crafted HTTP packet, aka Bug ID CSCto68554.

Cisco Jabber Extensible Communications Platform (aka Jabber XCP) 2.x through 5.4.x before 5.4.0.27581 and 5.8.x before 5.8.1.27561 does not properly detect recursion during entity expansion, which allows remote attackers to cause a denial of service (memory and CPU consumption, and process crash) via a crafted XML document containing a large number of nested entity references, aka Bug ID CSCtq78106, a similar issue to CVE-2003-1564.

Cisco Unified Communications Manager (CUCM) with software 6.x and 7.x before 7.1(5b)su5, 8.0 before 8.0(3a)su3, and 8.5 and 8.6 before 8.6(2a)su1 and Cisco Business Edition 3000 with software before 8.6.3 and 5000 and 6000 with software before 8.6(2a)su1 allow remote attackers to cause a denial of service (device reload) via a crafted SCCP registration, aka Bug ID CSCtu73538.

Cisco Adaptive Security Appliances (ASA) 5500 series devices, and the ASA Services module in Cisco Catalyst 6500 series devices, with software 7.0 before 7.0(8.13), 7.1 and 7.2 before 7.2(5.4), 8.0 before 8.0(5.25), 8.1 and 8.2 before 8.2(5.11), 8.3 before 8.3(2.23), 8.4 before 8.4(2.6), and 8.5 before 8.5(1.1) and Cisco Firewall Services Module (aka FWSM) 3.1 before 3.1(21), 3.2 before 3.2(22), 4.0 before 4.0(16), and 4.1 before 4.1(7) allow remote attackers to cause a denial of service (device reload) via crafted SunRPC traffic, aka Bug IDs CSCto92398 and CSCtq09989.

A vulnerability in the proxy service of Cisco AsyncOS for Cisco Web Security Appliance (WSA) could allow an unauthenticated, remote attacker to exhaust system memory and cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper memory management in the proxy service of an affected device. An attacker could exploit this vulnerability by establishing a large number of HTTPS connections to the affected device. A successful exploit could allow the attacker to cause the system to stop processing new connections, which could result in a DoS condition. Note: Manual intervention may be required to recover from this situation.

Memory leak in the NAT implementation in Cisco IOS 12.1 through 12.4 and 15.0 through 15.1, and IOS XE 3.1.xSG, allows remote attackers to cause a denial of service (memory consumption or device reload) by sending crafted SIP packets to UDP port 5060, aka Bug ID CSCtj04672.

Unspecified vulnerability in the NAT implementation in Cisco IOS 12.1 through 12.4 and 15.0 through 15.1, and IOS XE 3.1.xSG, allows remote attackers to cause a denial of service (device reload) by sending crafted H.323 packets to TCP port 1720, aka Bug ID CSCth11006.

The auth-proxy functionality in Cisco Firewall Services Module (FWSM) software 3.1 and 3.2 before 3.2(20.1), 4.0 before 4.0(15.2), and 4.1 before 4.1(5.1) allows remote attackers to cause a denial of service (device reload) via a crafted URL, aka Bug ID CSCtg02624.

A vulnerability in Cisco Meeting Server versions prior to 2.2.2 could allow an authenticated, remote attacker to cause the system to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to video calls being made on systems with a particular configuration. An attacker could exploit this by knowing a valid URI that directs to a Cisco Meeting Server. An attacker could then make a video call and cause the system to reload. Cisco Bug IDs: CSCve65931.

The IP stack in Cisco Intrusion Prevention System (IPS) Software in ASA 5500-X IPS-SSP software and hardware modules before 7.1(5)E4, IPS 4500 sensors before 7.1(6)E4, and IPS 4300 sensors before 7.1(5)E4 allows remote attackers to cause a denial of service (MainApp process hang) via malformed IPv4 packets, aka Bug ID CSCtx18596.

Cisco Video Surveillance 2421 and 2500 series cameras with software 1.1.x and 2.x before 2.4.0 and Video Surveillance 2600 series cameras with software before 4.2.0-13 allow remote attackers to cause a denial of service (device reload) by sending crafted RTSP packets over TCP, aka Bug IDs CSCtj96312, CSCtj39462, and CSCtl80175.

Cisco Firewall Services Module (aka FWSM) 3.1 before 3.1(21), 3.2 before 3.2(22), 4.0 before 4.0(16), and 4.1 before 4.1(7), when certain authentication configurations are used, allows remote attackers to cause a denial of service (module crash) by making many authentication requests for network access, aka Bug ID CSCtn15697.

The Wireless Intrusion Prevention System (wIPS) component on Cisco Wireless LAN Controller (WLC) devices with software 7.0 before 7.0.235.0, 7.1 and 7.2 before 7.2.110.0, and 7.3 before 7.3.101.0 allows remote attackers to cause a denial of service (device reload) via crafted IP packets, aka Bug ID CSCtx80743.

The provider-edge MPLS NAT implementation in Cisco IOS 12.1 through 12.4 and 15.0 through 15.1, and IOS XE 3.1.xSG, allows remote attackers to cause a denial of service (device reload) via a malformed SIP packet to UDP port 5060, aka Bug ID CSCti98219.

Cisco Adaptive Security Appliances (ASA) 5500 series devices, and the ASA Services module in Cisco Catalyst 6500 series devices, with software 7.0 before 7.0(8.13), 7.1 and 7.2 before 7.2(5.4), 8.0 before 8.0(5.25), 8.1 and 8.2 before 8.2(5.11), 8.3 before 8.3(2.23), 8.4 before 8.4(2.6), and 8.5 before 8.5(1.1) and Cisco Firewall Services Module (aka FWSM) 3.1 before 3.1(21), 3.2 before 3.2(22), 4.0 before 4.0(16), and 4.1 before 4.1(7) allow remote attackers to cause a denial of service (device reload) via crafted SunRPC traffic, aka Bug IDs CSCtq06062 and CSCtq09986.

Race condition in the VRF-aware NAT feature in Cisco IOS 12.2 through 12.4 and 15.0 through 15.2 allows remote attackers to cause a denial of service (memory consumption) via IPv4 packets, aka Bug IDs CSCtg47129 and CSCtz96745.

Unspecified vulnerability in the NAT implementation in Cisco IOS 12.1 through 12.4 and 15.0 through 15.1, and IOS XE 3.1.xSG, allows remote attackers to cause a denial of service (device reload) by sending crafted SIP packets to UDP port 5060, aka Bug ID CSCti48483.

Memory leak in Cisco IOS 15.0 through 15.1, when IPS or Zone-Based Firewall (aka ZBFW) is configured, allows remote attackers to cause a denial of service (memory consumption or device crash) via vectors that trigger many session creation flows, aka Bug ID CSCti79848.

The General Responder implementation in the IP Service Level Agreement (SLA) feature in Cisco IOS 15.2 and IOS XE 3.1.xS through 3.4.xS before 3.4.5S and 3.5.xS through 3.7.xS before 3.7.2S allows remote attackers to cause a denial of service (device reload) via crafted (1) IPv4 or (2) IPv6 IP SLA packets on UDP port 1167, aka Bug ID CSCuc72594.

The CallServer component in Cisco Unified Customer Voice Portal (CVP) Software before 9.0.1 ES 11 allows remote attackers to cause a denial of service (call-acceptance outage) via malformed SIP INVITE messages, aka Bug ID CSCua65148.

Cisco Adaptive Security Appliances (ASA) devices with software 9.0 before 9.0(1.2) allow remote attackers to cause a denial of service (device reload) via a crafted field in a DNS message, aka Bug ID CSCuc80080.

The IP Service Level Agreement (IP SLA) functionality in Cisco IOS 15.1, and IOS XE 2.1.x through 3.3.x, allows remote attackers to cause a denial of service (memory corruption and device reload) via malformed IP SLA packets, aka Bug ID CSCtk67073.