A vulnerability in an API endpoint of multiple Cisco Unified Communications Products could allow an unauthenticated, remote attacker to cause high CPU utilization, which could impact access to the web-based management interface and cause delays with call processing. This API is not used for device management and is unlikely to be used in normal operations of the device. This vulnerability is due to improper API authentication and incomplete validation of the API request. An attacker could exploit this vulnerability by sending a crafted HTTP request to a specific API on the device. A successful exploit could allow the attacker to cause a denial of service (DoS) condition due to high CPU utilization, which could negatively impact user traffic and management access. When the attack stops, the device will recover without manual intervention.
The Neighbor Discovery (ND) protocol implementation in the IPv6 stack in Cisco IOS before 15.0(1)XA5 allows remote attackers to cause a denial of service (CPU consumption and device hang) by sending many Router Advertisement (RA) messages with different source addresses, as demonstrated by the flood_router6 program in the thc-ipv6 package, aka Bug ID CSCti33534.
A vulnerability in the Vector Packet Processor (VPP) of Cisco Packet Data Network Gateway (PGW) could allow an unauthenticated, remote attacker to stop ICMP traffic from being processed over an IPsec connection. This vulnerability is due to the VPP improperly handling a malformed packet. An attacker could exploit this vulnerability by sending a malformed Encapsulating Security Payload (ESP) packet over an IPsec connection. A successful exploit could allow the attacker to stop ICMP traffic over an IPsec connection and cause a denial of service (DoS).
CallManager Express (CME) on Cisco IOS before 15.0(1)XA1 does not properly handle SIP TRUNK traffic that contains rate bursts and a "peculiar" request size, which allows remote attackers to cause a denial of service (memory consumption) by sending this traffic over a long duration, aka Bug ID CSCtb47950.
A vulnerability in the DNS functionality of Cisco Nexus Dashboard Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. This vulnerability is due to the improper processing of DNS requests. An attacker could exploit this vulnerability by sending a continuous stream of DNS requests to an affected device. A successful exploit could allow the attacker to cause the coredns service to stop working or cause the device to reload, resulting in a DoS condition.
A vulnerability in a logging API in Cisco Firepower Management Center (FMC) Software could allow an unauthenticated, remote attacker to cause the device to become unresponsive or trigger an unexpected reload. This vulnerability could also allow an attacker with valid user credentials, but not Administrator privileges, to view a system log file that they would not normally have access to. This vulnerability is due to a lack of rate-limiting of requests that are sent to a specific API that is related to an FMC log. An attacker could exploit this vulnerability by sending a high rate of HTTP requests to the API. A successful exploit could allow the attacker to cause a denial of service (DoS) condition due to the FMC CPU spiking to 100 percent utilization or to the device reloading. CPU utilization would return to normal if the attack traffic was stopped before an unexpected reload was triggered.
Linux kernel versions 4.9+ can be forced to make very expensive calls to tcp_collapse_ofo_queue() and tcp_prune_ofo_queue() for every incoming packet which can lead to a denial of service.
A vulnerability in the Cisco AnyConnect VPN server of Cisco Meraki MX and Cisco Meraki Z Series Teleworker Gateway devices could allow an unauthenticated, remote attacker to cause a DoS condition in the AnyConnect service on an affected device. This vulnerability is due to insufficient resource management when establishing TLS/SSL sessions. An attacker could exploit this vulnerability by sending a series of crafted TLS/SSL messages to the VPN server of an affected device. A successful exploit could allow the attacker to cause the Cisco AnyConnect VPN server to stop accepting new connections, preventing new SSL VPN connections from being established. Existing SSL VPN sessions are not impacted. Note: When the attack traffic stops, the Cisco AnyConnect VPN server recovers gracefully without requiring manual intervention.
A vulnerability in the Cisco AnyConnect VPN server of Cisco Meraki MX and Cisco Meraki Z Series Teleworker Gateway devices could allow an unauthenticated, remote attacker to cause a DoS condition on an affected device. This vulnerability is due to insufficient resource management while establishing SSL VPN sessions. An attacker could exploit this vulnerability by sending a series of crafted HTTPS requests to the VPN server of an affected device. A successful exploit could allow the attacker to cause the Cisco AnyConnect VPN server to stop accepting new connections, preventing new SSL VPN connections from being established. Existing SSL VPN sessions are not impacted. Note: When the attack traffic stops, the Cisco AnyConnect VPN server recovers gracefully without requiring manual intervention.
A vulnerability in the TCP/IP traffic handling function of the Snort Detection Engine of Cisco Firepower Threat Defense (FTD) Software and Cisco FirePOWER Services could allow an unauthenticated, remote attacker to cause legitimate network traffic to be dropped, resulting in a denial of service (DoS) condition. This vulnerability is due to the improper handling of TCP/IP network traffic. An attacker could exploit this vulnerability by sending a large amount of TCP/IP network traffic through the affected device. A successful exploit could allow the attacker to cause the Cisco FTD device to drop network traffic, resulting in a DoS condition. The affected device must be rebooted to resolve the DoS condition.
A vulnerability in the memory management of Cisco Adaptive Security Appliance (ASA) Software and Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper resource management when connection rates are high. An attacker could exploit this vulnerability by opening a significant number of connections on an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition.
The HTTP/2 protocol allows a denial of service (server resource consumption) because request cancellation can reset many streams quickly, as exploited in the wild in August through October 2023.
A vulnerability in the Secure Sockets Layer (SSL) packet reassembly functionality of the detection engine in Cisco Firepower System Software could allow an unauthenticated, remote attacker to cause the detection engine to consume excessive system memory on an affected device, which could cause a denial of service (DoS) condition. The vulnerability is due to the affected software improperly handling changes to SSL connection states. An attacker could exploit this vulnerability by sending crafted SSL connections through an affected device. A successful exploit could allow the attacker to cause the detection engine to consume excessive system memory on the affected device, which could cause a DoS condition. The device may need to be reloaded manually to recover from this condition. This vulnerability affects Cisco Firepower System Software Releases 6.0.0 and later, running on any of the following Cisco products: Adaptive Security Appliance (ASA) 5500-X Series Firewalls with FirePOWER Services, Adaptive Security Appliance (ASA) 5500-X Series Next-Generation Firewalls, Advanced Malware Protection (AMP) for Networks, 7000 Series Appliances, Advanced Malware Protection (AMP) for Networks, 8000 Series Appliances, Firepower 4100 Series Appliances, FirePOWER 7000 Series Appliances, FirePOWER 8000 Series Appliances, Firepower 9300 Series Security Appliances, Firepower Threat Defense for Integrated Services Routers (ISRs), Firepower Threat Defense Virtual for VMware, Industrial Security Appliance 3000, Sourcefire 3D System Appliances. Cisco Bug IDs: CSCve23031.
A vulnerability in the internal packet-processing functionality of Cisco Firepower Threat Defense (FTD) Software for Cisco Firepower 2100 Series Security Appliances could allow an unauthenticated, remote attacker to cause an affected device to stop processing traffic, resulting in a denial of service (DoS) condition. The vulnerability is due to the affected software improperly validating IP Version 4 (IPv4) and IP Version 6 (IPv6) packets after the software reassembles the packets (following IP Fragmentation). An attacker could exploit this vulnerability by sending a series of malicious, fragmented IPv4 or IPv6 packets to an affected device. A successful exploit could allow the attacker to cause Snort processes on the affected device to hang at 100% CPU utilization, which could cause the device to stop processing traffic and result in a DoS condition until the device is reloaded manually. This vulnerability affects Cisco Firepower Threat Defense (FTD) Software Releases 6.2.1 and 6.2.2, if the software is running on a Cisco Firepower 2100 Series Security Appliance. Cisco Bug IDs: CSCvf91098.
A vulnerability in the DHCPv6 feature of the Cisco Nexus 9000 Series Fabric Switches in Application-Centric Infrastructure (ACI) Mode could allow an unauthenticated, remote attacker to cause the device to run low on system memory, which could result in a Denial of Service (DoS) condition on an affected system. The vulnerability is due to improper memory management when DHCPv6 packets are received on an interface of the targeted device. An attacker could exploit this vulnerability by sending a high number of malicious DHCPv6 packets to be processed by an affected device. A successful exploit could allow the attacker to cause the system to run low on memory, which could cause an eventual reboot of an affected device. The vulnerability only applies to IPv6 protocol packets and not for IPv4 protocol packets. This vulnerability affects Cisco Nexus 9000 Series Fabric Switches in ACI Mode running software version 13.0(1k). The vulnerability can only be exploited when unicast routing is enabled on the Bridge Domain (BD). DHCP and DHCP relay do not have to be configured for the vulnerability to be exploited. Cisco Bug IDs: CSCvg38918.
A vulnerability in the Local Packet Transport Services (LPTS) feature set of Cisco ASR 9000 Series Aggregation Services Router Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to a lack of input and validation checking on certain Precision Time Protocol (PTP) ingress traffic to an affected device. An attacker could exploit this vulnerability by injecting malformed traffic into an affected device. A successful exploit could allow the attacker to cause services on the device to become unresponsive, resulting in a DoS condition. Cisco Bug IDs: CSCvj22858.
A vulnerability in the SSH service of the Cisco StarOS operating system could allow an unauthenticated, remote attacker to cause an affected device to stop processing traffic, resulting in a denial of service (DoS) condition. The vulnerability is due to a logic error that may occur under specific traffic conditions. An attacker could exploit this vulnerability by sending a series of crafted packets to an affected device. A successful exploit could allow the attacker to prevent the targeted service from receiving any traffic, which would lead to a DoS condition on the affected device.
A vulnerability in the Cisco IOx Application Framework of Cisco 809 Industrial Integrated Services Routers (Industrial ISRs), Cisco 829 Industrial ISRs, Cisco CGR 1000 Compute Module, and Cisco IC3000 Industrial Compute Gateway could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient error handling during packet processing. An attacker could exploit this vulnerability by sending a high and sustained rate of crafted TCP traffic to the IOx web server on an affected device. A successful exploit could allow the attacker to cause the IOx web server to stop processing requests, resulting in a DoS condition.
Multiple vulnerabilities in Cisco SD-WAN vManage Software could allow an unauthenticated, remote attacker to execute arbitrary code or gain access to sensitive information, or allow an authenticated, local attacker to gain escalated privileges or gain unauthorized access to the application. For more information about these vulnerabilities, see the Details section of this advisory.
Multiple Cisco products are affected by a vulnerability in local file management for certain system log files of Cisco collaboration products that could allow an unauthenticated, remote attacker to cause high disk utilization, resulting in a denial of service (DoS) condition. The vulnerability occurs because a certain system log file does not have a maximum size restriction. Therefore, the file is allowed to consume the majority of available disk space on the appliance. An attacker could exploit this vulnerability by sending crafted remote connection requests to the appliance. Successful exploitation could allow the attacker to increase the size of a system log file so that it consumes most of the disk space. The lack of available disk space could lead to a DoS condition in which the application functions could operate abnormally, making the appliance unstable. This vulnerability affects the following Cisco Voice Operating System (VOS)-based products: Emergency Responder, Finesse, Hosted Collaboration Mediation Fulfillment, MediaSense, Prime License Manager, SocialMiner, Unified Communications Manager (UCM), Unified Communications Manager IM and Presence Service (IM&P - earlier releases were known as Cisco Unified Presence), Unified Communication Manager Session Management Edition (SME), Unified Contact Center Express (UCCx), Unified Intelligence Center (UIC), Unity Connection, Virtualized Voice Browser. This vulnerability also affects Prime Collaboration Assurance and Prime Collaboration Provisioning. Cisco Bug IDs: CSCvd10872, CSCvf64322, CSCvf64332, CSCvi29538, CSCvi29543, CSCvi29544, CSCvi29546, CSCvi29556, CSCvi29571, CSCvi31738, CSCvi31741, CSCvi31762, CSCvi31807, CSCvi31818, CSCvi31823.
A vulnerability in the logging configuration of Secure Sockets Layer (SSL) policies for Cisco FirePOWER System Software 5.3.0 through 6.2.2 could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition due to high consumption of system resources. The vulnerability is due to the logging of certain TCP packets by the affected software. An attacker could exploit this vulnerability by sending a flood of crafted TCP packets to an affected device. A successful exploit could allow the attacker to cause a DoS condition. The success of an exploit is dependent on how an administrator has configured logging for SSL policies for a device. This vulnerability affects Cisco FirePOWER System Software that is configured to log connections by using SSL policy default actions. Cisco Bug IDs: CSCvd07072.
A vulnerability in the web user interface of Cisco IOS XE 3.1 through 3.17 could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability is due to insufficient resource handling by the affected software when the web user interface is under a high load. An attacker could exploit this vulnerability by sending a high number of requests to the web user interface of the affected software. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition. To exploit this vulnerability, the attacker must have access to the management interface of the affected software, which is typically connected to a restricted management network. This vulnerability affects Cisco devices that are running a vulnerable release of Cisco IOS XE Software, if the web user interface of the software is enabled. By default, the web user interface is not enabled. Cisco Bug IDs: CSCup70353.
A vulnerability in the Layer 2 Tunneling Protocol (L2TP) parsing function of Cisco IOS (12.0 through 12.4 and 15.0 through 15.6) and Cisco IOS XE (3.1 through 3.18) could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability is due to insufficient validation of L2TP packets. An attacker could exploit this vulnerability by sending a crafted L2TP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition. This vulnerability affects Cisco devices that are running a vulnerable release of Cisco IOS or Cisco IOS XE Software if the L2TP feature is enabled for the device and the device is configured as an L2TP Version 2 (L2TPv2) or L2TP Version 3 (L2TPv3) endpoint. By default, the L2TP feature is not enabled. Cisco Bug IDs: CSCuy82078.
A vulnerability in the packet processing functionality of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to inefficient memory management. An attacker could exploit this vulnerability by sending a high rate of IPv4 or IPv6 traffic through an affected device. This traffic would need to match a configured block action in an access control policy. An exploit could allow the attacker to cause a memory exhaustion condition on the affected device, which would result in a DoS for traffic transiting the device, as well as sluggish performance of the management interface. Once the flood is stopped, performance should return to previous states.
A vulnerability in the web interface of Cisco Adaptive Security Appliance (ASA) Software and Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause an affected device to reload unexpectedly, resulting in a denial of service (DoS) condition. The vulnerability is due to a lack of proper input validation of HTTP requests. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. An exploit could allow the attacker to cause a DoS condition. Note: This vulnerability applies to IP Version 4 (IPv4) and IP Version 6 (IPv6) HTTP traffic.
A vulnerability in the locally significant certificate (LSC) provisioning feature of Cisco Catalyst 9800 Series Wireless Controllers that are running Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a memory leak that could lead to a denial of service (DoS) condition. The vulnerability is due to incorrect processing of certain public key infrastructure (PKI) packets. An attacker could exploit this vulnerability by sending crafted Secure Sockets Layer (SSL) packets to an affected device. A successful exploit could cause an affected device to continuously consume memory, which could result in a memory allocation failure that leads to a crash and causes a DoS condition.
A vulnerability in the Open Shortest Path First (OSPF) implementation in Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a memory leak on an affected device. The vulnerability is due to incorrect processing of certain OSPF packets. An attacker could exploit this vulnerability by sending a series of crafted OSPF packets to be processed by an affected device. A successful exploit could allow the attacker to continuously consume memory on an affected device and eventually cause it to reload, resulting in a denial of service (DoS) condition.
A vulnerability in the web proxy functionality of Cisco AsyncOS Software for Cisco Web Security Appliances could allow an unauthenticated, remote attacker to exhaust system memory and cause a denial of service (DoS) condition on an affected system. The vulnerability exists because the affected software improperly manages memory resources for TCP connections to a targeted device. An attacker could exploit this vulnerability by establishing a high number of TCP connections to the data interface of an affected device via IPv4 or IPv6. A successful exploit could allow the attacker to exhaust system memory, which could cause the system to stop processing new connections and result in a DoS condition. System recovery may require manual intervention. Cisco Bug IDs: CSCvf36610.
A vulnerability in the OSPF Version 2 (OSPFv2) implementation of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to incomplete input validation when the affected software processes certain OSPFv2 packets with Link-Local Signaling (LLS) data. An attacker could exploit this vulnerability by sending a malformed OSPFv2 packet to an affected device. A successful exploit could allow the attacker to cause an affected device to reload, resulting in a DoS condition.
A vulnerability in the resource handling system of Cisco NX-OS Software for Cisco MDS 9000 Series Multilayer Switches could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to improper resource usage control. An attacker could exploit this vulnerability by sending traffic to the management interface (mgmt0) of an affected device at very high rates. An exploit could allow the attacker to cause unexpected behaviors such as high CPU usage, process crashes, or even full system reboots of an affected device.
A vulnerability in SSL/TLS message handler for Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability exists because incoming SSL/TLS packets are not properly processed. An attacker could exploit this vulnerability by sending a crafted SSL/TLS packet to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition.
A vulnerability in the DNS inspection handler of Cisco Adaptive Security Appliance (ASA) Software and Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service condition (DoS) on an affected device. This vulnerability is due to a lack of proper processing of incoming requests. An attacker could exploit this vulnerability by sending crafted DNS requests at a high rate to an affected device. A successful exploit could allow the attacker to cause the device to stop responding, resulting in a DoS condition.
A vulnerability in the Cisco Fabric Services over IP (CFSoIP) feature of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient validation of incoming CFSoIP packets. An attacker could exploit this vulnerability by sending crafted CFSoIP packets to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition.
A vulnerability in Cisco AsyncOS Software for Cisco Email Security Appliance (ESA) could allow an unauthenticated remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper handling of certain TLS connections that are processed by an affected device. An attacker could exploit this vulnerability by establishing a large number of concurrent TLS connections to an affected device. A successful exploit could allow the attacker to cause the device to drop new TLS email messages that come from the associated email servers. Exploitation of this vulnerability does not cause the affected device to unexpectedly reload. The device will recover autonomously within a few hours of when the attack is halted or mitigated.
A vulnerability in the processing of SSH connections of Cisco Firepower Management Center (FMC) and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper error handling when an SSH session fails to be established. An attacker could exploit this vulnerability by sending a high rate of crafted SSH connections to the instance. A successful exploit could allow the attacker to cause resource exhaustion, resulting in a reboot on the affected device.
A vulnerability in the Network Time Protocol (NTP) feature of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to excessive use of system resources when the affected device is logging a drop action for received MODE_PRIVATE (Mode 7) NTP packets. An attacker could exploit this vulnerability by flooding the device with a steady stream of Mode 7 NTP packets. A successful exploit could allow the attacker to cause high CPU and memory usage on the affected device, which could cause internal system processes to restart or cause the affected device to unexpectedly reload. Note: The NTP feature is enabled by default.
A vulnerability in the cryptographic driver for Cisco Adaptive Security Appliance Software (ASA) and Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause the device to reboot unexpectedly. The vulnerability is due to incomplete input validation of a Secure Sockets Layer (SSL) or Transport Layer Security (TLS) ingress packet header. An attacker could exploit this vulnerability by sending a crafted TLS/SSL packet to an interface on the targeted device. An exploit could allow the attacker to cause the device to reload, which will result in a denial of service (DoS) condition. Note: Only traffic directed to the affected system can be used to exploit this vulnerability. This vulnerability affects systems configured in routed and transparent firewall mode and in single or multiple context mode. This vulnerability can be triggered by IPv4 and IPv6 traffic. A valid SSL or TLS session is required to exploit this vulnerability.
A vulnerability in the internal packet-processing functionality of Cisco Firepower Threat Defense (FTD) Software for the Cisco Firepower 2100 Series could allow an unauthenticated, remote attacker to cause an affected device to stop processing traffic, resulting in a denial of service (DoS) condition. The vulnerability is due to a logic error, which may prevent ingress buffers from being replenished under specific traffic conditions. An attacker could exploit this vulnerability by sending a series of crafted packets to an affected device. A successful exploit could allow the attacker to consume all input buffers, which are shared between all interfaces, leading to a queue wedge condition in all active interfaces. This situation would cause an affected device to stop processing any incoming traffic and result in a DoS condition until the device is reloaded manually.
A vulnerability in the processing of IP Service Level Agreement (SLA) packets by Cisco IOS Software and Cisco IOS XE software could allow an unauthenticated, remote attacker to cause an interface wedge and an eventual denial of service (DoS) condition on the affected device. The vulnerability is due to improper socket resources handling in the IP SLA responder application code. An attacker could exploit this vulnerability by sending crafted IP SLA packets to an affected device. An exploit could allow the attacker to cause an interface to become wedged, resulting in an eventual denial of service (DoS) condition on the affected device.
The ethernet-lldp component in Cisco IOS 12.2 before 12.2(33)SXJ1 does not properly support a large number of LLDP Management Address (MA) TLVs, which allows remote attackers to cause a denial of service (device crash) via crafted LLDPDUs, aka Bug ID CSCtj22354.
A vulnerability in the UDP protocol implementation for Cisco IoT Field Network Director (IoT-FND) could allow an unauthenticated, remote attacker to exhaust system resources, resulting in a denial of service (DoS) condition. The vulnerability is due to improper resource management for UDP ingress packets. An attacker could exploit this vulnerability by sending a high rate of UDP packets to an affected system within a short period of time. A successful exploit could allow the attacker to exhaust available system resources, resulting in a DoS condition.
A vulnerability in the Internet Key Exchange version 1 (IKEv1) feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to trigger a reload of an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to improper management of system memory. An attacker could exploit this vulnerability by sending malicious IKEv1 traffic to an affected device. The attacker does not need valid credentials to authenticate the VPN session, nor does the attacker's source address need to match a peer statement in the crypto map applied to the ingress interface of the affected device. An exploit could allow the attacker to exhaust system memory resources, leading to a reload of an affected device.
A vulnerability in the email parsing module Clam AntiVirus (ClamAV) Software versions 0.102.0, 0.101.4 and prior could allow an unauthenticated, remote attacker to cause a denial of service condition on an affected device. The vulnerability is due to inefficient MIME parsing routines that result in extremely long scan times of specially formatted email files. An attacker could exploit this vulnerability by sending a crafted email file to an affected device. An exploit could allow the attacker to cause the ClamAV scanning process to scan the crafted email file indefinitely, resulting in a denial of service condition.
A vulnerability in the packet processing functionality of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to inefficient memory management. An attacker could exploit this vulnerability by sending a large number of TCP packets to a specific port on an affected device. A successful exploit could allow the attacker to exhaust system memory, which could cause the device to reload unexpectedly. No manual intervention is needed to recover the device after it has reloaded.
A vulnerability in the TCP packet processing of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to a memory exhaustion condition. An attacker could exploit this vulnerability by sending a high rate of crafted TCP traffic through an affected device. A successful exploit could allow the attacker to exhaust device resources, resulting in a DoS condition for traffic transiting the affected device.
A vulnerability in the ICMP ingress packet processing of Cisco Firepower Threat Defense (FTD) Software for Cisco Firepower 4110 appliances could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to incomplete input validation upon receiving ICMP packets. An attacker could exploit this vulnerability by sending a high number of crafted ICMP or ICMPv6 packets to an affected device. A successful exploit could allow the attacker to cause a memory exhaustion condition that may result in an unexpected reload. No manual intervention is needed to recover the device after the reload.
A vulnerability in Cisco Aironet Access Points (APs) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) on an affected device. The vulnerability is due to improper resource management while processing specific packets. An attacker could exploit this vulnerability by sending a series of crafted UDP packets to a specific port on an affected device. A successful exploit could either allow the attacker to tear down the connection between the AP and the wireless LAN controller, resulting in the affected device not being able to process client traffic, or cause the vulnerable device to reload, triggering a DoS condition. After the attack, the affected device should automatically recover its normal functions without manual intervention.
A vulnerability in the WebVPN feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause increased CPU utilization on an affected device. The vulnerability is due to excessive processing load for a specific WebVPN HTTP page request. An attacker could exploit this vulnerability by sending multiple WebVPN HTTP page load requests for a specific URL. A successful exploit could allow the attacker to increase CPU load on the device, resulting in a denial of service (DoS) condition, which could cause traffic to be delayed through the device.
A vulnerability in the filesystem resource management code of Cisco IOS XE Software could allow an unauthenticated, remote attacker to exhaust filesystem resources on an affected device and cause a denial of service (DoS) condition. The vulnerability is due to ineffective management of the underlying filesystem resources. An attacker could exploit this vulnerability by performing specific actions that result in messages being sent to specific operating system log files. A successful exploit could allow the attacker to exhaust available filesystem space on an affected device. This could cause the device to crash and reload, resulting in a DoS condition for clients whose network traffic is transiting the device. Upon reload of the device, the impacted filesystem space is cleared, and the device will return to normal operation. However, continued exploitation of this vulnerability could cause subsequent forced crashes and reloads, which could lead to an extended DoS condition.
A vulnerability in the HTTP server code of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause the HTTP server to crash. The vulnerability is due to a logical error in the logging mechanism. An attacker could exploit this vulnerability by generating a high amount of long-lived connections to the HTTP service on the device. A successful exploit could allow the attacker to cause the HTTP server to crash.