A Remote Code Execution vulnerability in HPE Intelligent Management Center (iMC) PLAT version PLAT 7.3 (E0504) was found. The problem was resolved in HPE Intelligent Management Center PLAT v7.3 (E0506) or any subsequent version.

A Remote Code Execution vulnerability in HPE Intelligent Management Center (iMC) PLAT version PLAT 7.3 (E0504) was found. The problem was resolved in HPE Intelligent Management Center PLAT v7.3 (E0506) or any subsequent version.

A remote code execution vulnerability was identified in HPE Intelligent Management Center (IMC) PLAT earlier than version 7.3 E0506P09.

The files_external app in ownCloud Server before 7.0.9, 8.0.x before 8.0.7, and 8.1.x before 8.1.2 allows remote authenticated users to instantiate arbitrary classes and possibly execute arbitrary code via a crafted mount point option, related to "objectstore."

A crafted configuration packet sent by an authenticated administrative user can be used to execute arbitrary commands in system context. This issue also affects installations of the VRM, DIVAR IP, BVMS with VRM installed, the VIDEOJET decoder (VJD-7513 and VJD-8000).

Quest KACE, all versions prior to version 8.0.x, 8.1.x, and 9.0.x, allows unintentional access to the appliance leveraging functions of the troubleshooting tools located in the administrator user interface.

A remote code execution vulnerability exists when Windows Hyper-V on a host server fails to properly validate input from an authenticated user on a guest operating system. To exploit the vulnerability, an attacker could run a specially crafted application on a guest operating system that could cause the Hyper-V host operating system to execute arbitrary code. An attacker who successfully exploited the vulnerability could execute arbitrary code on the host operating system. The security update addresses the vulnerability by correcting how Hyper-V validates guest operating system user input.

A remote code execution vulnerability exists when Windows Hyper-V Network Switch on a host server fails to properly validate input from an authenticated user on a guest operating system, aka 'Hyper-V Remote Code Execution Vulnerability'. This CVE ID is unique from CVE-2019-0719.

An input validation vulnerability in CA Privileged Access Manager 2.x allows unprivileged users to execute arbitrary commands by passing specially crafted arguments to the update_crld script.

In Lenovo xClarity Administrator versions earlier than 2.1.0, an authenticated LXCA user can, under specific circumstances, inject additional parameters into a specific web API call which can result in privileged command execution within LXCA's underlying operating system.

Bamboo did not correctly check if a configured Mercurial repository URI contained values that the Windows operating system may consider argument parameters. An attacker who has permission to create a repository in Bamboo, edit an existing plan in Bamboo that has a non-linked Mercurial repository, or create a plan in Bamboo either globally or in a project using Bamboo Specs can can execute code of their choice on systems that run a vulnerable version of Bamboo on the Windows operating system. All versions of Bamboo starting with 2.7.0 before 6.3.3 (the fixed version for 6.3.x) and from version 6.4.0 before 6.4.1 (the fixed version for 6.4.x) running on the Windows operating system are affected by this vulnerability.

A Code Execution vulnerability exists in Android prior to 4.4.0 related to the addJavascriptInterface method and the accessibility and accessibilityTraversal objects, which could let a remote malicious user execute arbitrary code.

Java Method Server (JMS) in EMC Documentum Content Server before 6.7SP1 P32, 6.7SP2 before P25, 7.0 before P19, 7.1 before P16, and 7.2 before P02 allows remote authenticated users to execute arbitrary code by forging a signature for a query string that lacks the method_verb parameter.

The administrative web interface in Cisco WebEx Meetings Server 1.0 through 1.5 allows remote authenticated users to execute arbitrary OS commands with root privileges via unspecified fields, aka Bug ID CSCuj40460.

The ViewPoint web application in Dell SonicWALL Global Management System (GMS) before 7.2 SP2, SonicWALL Analyzer before 7.2 SP2, and SonicWALL UMA before 7.2 SP2 allows remote authenticated users to execute arbitrary code via unspecified vectors.

An issue was discovered in the firewall3 component in Inteno IOPSYS 1.0 through 3.16. The attacker must make a JSON-RPC method call to add a firewall rule as an "include" and point the "path" argument to a malicious script or binary. This gets executed as root when the firewall changes are committed.

Digi TransPort LR54 4.4.0.26 and possible earlier devices have Improper Input Validation that allows users with 'super' CLI access privileges to bypass a restricted shell and execute arbitrary commands as root.

A flaw was found in PolicyKit (aka polkit) 0.115 that allows a user with a uid greater than INT_MAX to successfully execute any systemctl command.

An Improper Input Validation vulnerability in J-Web of Juniper Networks Junos OS allows a locally authenticated J-Web attacker to escalate their privileges to root over the target device. This issue affects: Juniper Networks Junos OS All versions prior to 18.3R3-S5; 18.4 versions prior to 18.4R3-S9; 19.1 versions prior to 19.1R3-S6; 19.2 versions prior to 19.2R3-S3; 19.3 versions prior to 19.3R3-S3; 19.4 versions prior to 19.4R3-S5; 20.1 versions prior to 20.1R3-S1; 20.2 versions prior to 20.2R3-S2; 20.3 versions prior to 20.3R3-S1; 20.4 versions prior to 20.4R3; 21.1 versions prior to 21.1R2, 21.1R3; 21.2 versions prior to 21.2R1-S1, 21.2R2;

jsdm/ajax/port.php in J-Web in Juniper Junos before 10.4R13, 11.4 before 11.4R7, 12.1 before 12.1R5, 12.2 before 12.2R3, and 12.3 before 12.3R1 allows remote authenticated users to execute arbitrary commands via the rsargs parameter in an exec action.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV016, RV042, RV042G, RV082, RV320, and RV325 Routers could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. These vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on an affected device.

Multiple vulnerabilities in Cisco SD-WAN products could allow an authenticated attacker to perform command injection attacks against an affected device, which could allow the attacker to take certain actions with root privileges on the device. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the web UI of Cisco Smart Software Manager Satellite could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV016, RV042, RV042G, RV082, RV320, and RV325 Routers could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. These vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on an affected device.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV016, RV042, RV042G, RV082, RV320, and RV325 Routers could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. These vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on an affected device.

ManageOne versions 6.5.1.1.B010, 6.5.1.1.B020, 6.5.1.1.B030, 6.5.1.1.B040, ,6.5.1.1.B050, 8.0.0 and 8.0.1 have a command injection vulnerability. An attacker with high privileges may exploit this vulnerability through some operations on the plug-in component. Due to insufficient input validation of some parameters, the attacker can exploit this vulnerability to inject commands to the target device.

IBM QRadar Incident Forensics 7.2 could allow a remote authenticated attacker to execute arbitrary commands on the system. By sending a specially-crafted request, an attacker could exploit this vulnerability to execute arbitrary commands on the system. IBM Reference #: 1999542.

A flaw was found in Ansible Tower's interface before 3.1.5 and 3.2.0 with SCM repositories. If a Tower project (SCM repository) definition does not have the 'delete before update' flag set, an attacker with commit access to the upstream playbook source repository could create a Trojan playbook that, when executed by Tower, modifies the checked out SCM repository to add git hooks. These git hooks could, in turn, cause arbitrary command and code execution as the user Tower runs as.

A Remote Code Execution vulnerability in HPE Intelligent Management Center (iMC) PLAT version PLAT 7.3 (E0504) was found. The problem was resolved in HPE Intelligent Management Center PLAT v7.3 (E0506) or any subsequent version.

A Remote Code Execution vulnerability in HPE Intelligent Management Center (iMC) PLAT version PLAT 7.3 (E0504) was found. The problem was resolved in HPE Intelligent Management Center PLAT v7.3 (E0506) or any subsequent version.

A vulnerability in the web-based Wireless Controller GUI of Cisco IOS XE Software for Cisco 5760 Wireless LAN Controllers, Cisco Catalyst 4500E Supervisor Engine 8-E (Wireless) Switches, and Cisco New Generation Wireless Controllers (NGWC) 3850 could allow an authenticated, remote attacker to elevate their privileges on an affected device. The vulnerability is due to incomplete input validation of HTTP requests by the affected GUI, if the GUI connection state or protocol changes. An attacker could exploit this vulnerability by authenticating to the Wireless Controller GUI as a Lobby Administrator user of an affected device and subsequently changing the state or protocol for their connection to the GUI. A successful exploit could allow the attacker to elevate their privilege level to administrator and gain full control of the affected device. This vulnerability affects the following Cisco products if they are running Cisco IOS XE Software Release 3.7.0E, 3.7.1E, 3.7.2E, 3.7.3E, 3.7.4E, or 3.7.5E: Cisco 5760 Wireless LAN Controllers, Cisco Catalyst 4500E Supervisor Engine 8-E (Wireless) Switches, Cisco New Generation Wireless Controllers (NGWC) 3850. Cisco Bug IDs: CSCvd73746.

A Remote Code Execution vulnerability in HPE Intelligent Management Center (iMC) PLAT version PLAT 7.3 (E0504) was found. The problem was resolved in HPE Intelligent Management Center PLAT v7.3 (E0506) or any subsequent version.

This vulnerability allows remote attackers to execute arbitrary code on vulnerable installations of EMC Data Protection Advisor 6.3.0. Authentication is required to exploit this vulnerability. The specific flaw exists within the EMC DPA Application service, which listens on TCP port 9002 by default. When parsing the preScript parameter, the process does not properly validate a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute arbitrary code under the context of SYSTEM. Was ZDI-CAN-4697. NOTE: Dell EMC disputes that this is a vulnerability

A vulnerability in Cisco SD-WAN vManage Software could allow an authenticated, remote attacker to execute code with root privileges on an affected system. The vulnerability is due to insufficient input sanitization during user authentication processing. An attacker could exploit this vulnerability by sending a crafted response to the Cisco SD-WAN vManage Software. A successful exploit could allow the attacker to access the software and execute commands they should not be authorized to execute.

Multiple vulnerabilities in the REST API of Cisco UCS Director and Cisco UCS Director Express for Big Data may allow a remote attacker to bypass authentication or conduct directory traversal attacks on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the REST API of Cisco UCS Director and Cisco UCS Director Express for Big Data may allow a remote attacker to bypass authentication or conduct directory traversal attacks on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.