Stack-based buffer overflow in the libbecompat library in Ingres 2.6, Ingres 2006 release 1 (aka 9.0.4), and Ingres 2006 release 2 (aka 9.1.0) on Linux and HP-UX allows local users to gain privileges by setting a long value of an environment variable before running (1) verifydb, (2) iimerge, or (3) csreport.
Ingres 2.5 and 2.6 on Windows, as used in multiple CA products and possibly other products, assigns the privileges and identity of users to be the same as the first user, which allows remote attackers to gain privileges.
Enlightenment before 0.17.6 might allow local users to gain privileges via vectors involving the gdb method.
An unspecified setuid root helper in Enlightenment before 0.17.6 allows local users to gain privileges by leveraging failure to properly sanitize the environment.
zsh before 5.0.7 allows evaluation of the initial values of integer variables imported from the environment (instead of treating them as literal numbers). That could allow local privilege escalation, under some specific and atypical conditions where zsh is being invoked in privilege-elevation contexts when the environment has not been properly sanitized, such as when zsh is invoked by sudo on systems where "env_reset" has been disabled.
Privilege Escalation vulnerability in McAfee FRP 5.x prior to 5.1.0.209 allows local users to gain elevated privileges via running McAfee Tray with elevated privileges.
A vulnerability in TACACS authentication with Cisco Wireless LAN Controller (WLC) Software could allow an authenticated, local attacker to perform certain operations within the GUI that are not normally available to that user on the CLI. The vulnerability is due to incorrect parsing of a specific TACACS attribute received in the TACACS response from the remote TACACS server. An attacker could exploit this vulnerability by authenticating via TACACS to the GUI on the affected device. A successful exploit could allow an attacker to create local user accounts with administrative privileges on an affected WLC and execute other commands that are not allowed from the CLI and should be prohibited.
V8 javascript engine (heap vulnerability) can cause privilege escalation ,which can impact on some webOS TV models.
Microsoft Office 2008 for Mac, when running on Macintosh systems that restrict Office access to administrators, does not enforce this restriction for user ID 502, which allows local users with that ID to bypass intended security policy and access Office programs, related to permissions and ownership for certain directories.
Robin Rawson-Tetley Animal Shelter Manager (ASM) before 2.2.2 does not properly enforce the privileges of user accounts, which allows local users to bypass intended access restrictions by (1) opening unspecified screens, related to the "double click selector bug"; or modifying a (2) animal, (3) owner, (4) lost/found, (5) diary note, (6) owner donation, or (7) waiting list record, related to "change permissions" and the "new UI."
nilfs-utils before 2.0.14 installs multiple programs with unnecessary setuid privileges, which allows local users to execute arbitrary commands via the device string in a -c command line option to mkfs.nilfs2.
In cPanel before 67.9999.103, the backup system overwrites root's home directory when a mount disappears (SEC-299).
A vulnerability in Cisco IOS ROM Monitor (ROMMON) Software for Cisco Catalyst 6800 Series Switches could allow an unauthenticated, local attacker to bypass Cisco Secure Boot validation checks and load a compromised software image on an affected device. The vulnerability is due to the presence of a hidden command in the affected software. An attacker could exploit this vulnerability by connecting to an affected device via the console, forcing the device into ROMMON mode, and writing a malicious pattern to a specific memory address on the device. A successful exploit could allow the attacker to bypass signature validation checks by Cisco Secure Boot technology and load a compromised software image on the affected device. A compromised software image is any software image that has not been digitally signed by Cisco.
A vulnerability has been identified in SINUMERIK 808D V4.7 (All versions), SINUMERIK 808D V4.8 (All versions), SINUMERIK 828D V4.7 (All versions < V4.7 SP6 HF1), SINUMERIK 840D sl V4.7 (All versions < V4.7 SP6 HF5), SINUMERIK 840D sl V4.8 (All versions < V4.8 SP3). A local attacker with user privileges could use the service command application for privilege escalation to an elevated user but not root. The security vulnerability could be exploited by an attacker with local access to the affected systems. Successful exploitation requires user privileges but no user interaction. The vulnerability could allow an attacker to compromise confidentiality, integrity and availability of the system. At the time of advisory publication no public exploitation of this security vulnerability was known.
A vulnerability in the web-based GUI of Cisco UCS Director 6.0.0.0 and 6.0.0.1 could allow an authenticated, local attacker to execute arbitrary workflow items with just an end-user profile, a Privilege Escalation Vulnerability. The vulnerability is due to improper role-based access control (RBAC) after the Developer Menu is enabled in Cisco UCS Director. An attacker could exploit this vulnerability by enabling Developer Mode for his/her user profile with an end-user profile and then adding new catalogs with arbitrary workflow items to his/her profile. An exploit could allow an attacker to perform any actions defined by these workflow items, including actions affecting other tenants. Cisco Bug IDs: CSCvb64765.
Insufficient protection of the inter-process communication functions in ABB System 800xA Base (all published versions) enables an attacker authenticated on the local system to inject data, affect node redundancy handling.
Insufficient protection of the inter-process communication functions in ABB System 800xA for DCI (all published versions) enables an attacker authenticated on the local system to inject data, allowing reads and writes to the controllers or cause windows processes to crash.
Insufficient protection of the inter-process communication functions in ABB System 800xA for MOD 300 (all published versions) enables an attacker authenticated on the local system to inject data, allowing reads and writes to the controllers or cause windows processes to crash.
Insufficient protection of the inter-process communication functions in ABB System 800xA RNRP (all published versions) enables an attacker authenticated on the local system to inject data, affect node redundancy handling.
A vulnerability in the AntivirusforMac binary as used in Bitdefender Antivirus for Mac allows an attacker to inject a library using DYLD environment variable to cause third-party code execution
Privilege Escalation vulnerability in the command line interface in McAfee Advanced Threat Defense (ATD) 4.x prior to 4.8.2 allows local users to execute arbitrary code via improper access controls on the sudo command.
Improper access control vulnerability in ESconfigTool.exe in McAfee Endpoint Security (ENS) for Windows all current versions allows local administrator to alter ENS configuration up to and including disabling all protection offered by ENS via insecurely implemented encryption of configuration for export and import.
Exploitation of Privilege/Trust vulnerability in file in McAfee Endpoint Security (ENS) Prior to 10.7.0 February 2020 Update allows local users to bypass local security protection via a carefully crafted input file
hald in Sun OpenSolaris snv_51 through snv_130 does not have the proc_audit privilege during unspecified attempts to write to the auditing log, which makes it easier for physically proximate attackers to avoid detection of changes to the set of connected hardware devices supporting the Hardware Abstraction Layer (HAL) specification.
dasauto in IBM DB2 8 before FP18, 9.1 before FP8, 9.5 before FP4, and 9.7 before FP1 permits execution by unprivileged user accounts, which has unspecified impact and local attack vectors.
The Shibboleth authentication module 5.x before 5.x-3.4 and 6.x before 6.x-3.2, a module for Drupal, does not properly remove statically granted privileges after a logout or other session change, which allows physically proximate attackers to gain privileges by using an unattended web browser.
The Self Tuning Memory Manager (STMM) component in IBM DB2 9.1 before FP8, 9.5 before FP5, and 9.7 before FP1 uses 0666 permissions for the STMM log file, which allows local users to cause a denial of service or have unspecified other impact by writing to this file.
AIX builds of Eclipse OpenJ9 before 0.15.0 contain unused RPATHs which may facilitate code injection and privilege elevation by local users.
In kubelet v1.13.6 and v1.14.2, containers for pods that do not specify an explicit runAsUser attempt to run as uid 0 (root) on container restart, or if the image was previously pulled to the node. If the pod specified mustRunAsNonRoot: true, the kubelet will refuse to start the container as root. If the pod did not specify mustRunAsNonRoot: true, the kubelet will run the container as uid 0.
An issue was discovered in Ivanti Workspace Control before 10.3.90.0. Local authenticated users with low privileges in a Workspace Control managed session can bypass Workspace Control security features configured for this session by resetting the session context.
incron 0.5.5 does not initialize supplementary groups when running a process from a user's incrontabs, which causes the process to be run with the incrond supplementary groups and allows local users to gain privileges via an incrontab table.
NFSv4 in the Linux kernel 2.6.18, and possibly other versions, does not properly clean up an inode when an O_EXCL create fails, which causes files to be created with insecure settings such as setuid bits, and possibly allows local users to gain privileges, related to the execution of the do_open_permission function even when a create fails.
An elevation of privilege vulnerability exists when Windows improperly handles calls to the LUAFV driver (luafv.sys), aka 'Windows Elevation of Privilege Vulnerability'. This CVE ID is unique from CVE-2019-0730, CVE-2019-0796, CVE-2019-0805, CVE-2019-0836, CVE-2019-0841.
An elevation of privilege vulnerability exists when Windows improperly handles calls to the LUAFV driver (luafv.sys), aka 'Windows Elevation of Privilege Vulnerability'. This CVE ID is unique from CVE-2019-0731, CVE-2019-0796, CVE-2019-0805, CVE-2019-0836, CVE-2019-0841.
Improper permissions for Intel(R) USB 3.0 Creator Utility all versions may allow an authenticated user to potentially enable escalation of privilege via local access.
IBM DB2 8.1 before FP18 allows attackers to obtain unspecified access via a das command.
Improper permissions in the installer for Intel(R) Accelerated Storage Manager in Intel(R) RSTe before version 5.5.0.2015 may allow an authenticated user to potentially enable escalation of privilege via local access. L-SA-00206
Improper permissions in Intel(R) Matrix Storage Manager 8.9.0.1023 and before may allow an authenticated user to potentially enable escalation of privilege via local access.
Improper permissions in the installer for Intel(R) Chipset Device Software (INF Update Utility) before version 10.1.1.45 may allow an authenticated user to escalate privilege via local access.
The kernel in NetBSD, probably 5.0.1 and earlier, on x86 platforms does not properly handle a pre-commit failure of the iret instruction, which might allow local users to gain privileges via vectors related to a tempEIP pseudocode variable that is outside of the code-segment limits.
The NtUserConsoleControl function in win32k.sys in Microsoft Windows XP SP2 and SP3, and Server 2003 before SP1, allows local administrators to bypass unspecified "security software" and gain privileges via a crafted call that triggers an overwrite of an arbitrary memory location. NOTE: the vendor disputes the significance of this report, stating that 'the Administrator to SYSTEM "escalation" is not a security boundary we defend.
xvfb-run 1.6.1 in Debian GNU/Linux, Ubuntu, Fedora 10, and possibly other operating systems place the magic cookie (MCOOKIE) on the command line, which allows local users to gain privileges by listing the process and its arguments.
razorCMS before 0.4 uses weak permissions for (1) admin/core/admin_config.php, which allows local users to obtain the administrator's password hash and FTP user credentials; and (2) the root directory, (3) datastore/, and (4) admin/core/, which allows local users to have an unspecified impact.
The kill_something_info function in kernel/signal.c in the Linux kernel before 2.6.28 does not consider PID namespaces when processing signals directed to PID -1, which allows local users to bypass the intended namespace isolation, and send arbitrary signals to all processes in all namespaces, via a kill command.
Linux-PAM before 1.0.4 does not enforce the minimum password age (MINDAYS) as specified in /etc/shadow, which allows local users to bypass intended security policy and change their passwords sooner than specified.
Russ Allbery pam-krb5 before 3.13, as used by libpam-heimdal, su in Solaris 10, and other software, does not properly handle calls to pam_setcred when running setuid, which allows local users to overwrite and change the ownership of arbitrary files by setting the KRB5CCNAME environment variable, and then launching a setuid application that performs certain pam_setcred operations.
The name service cache daemon (nscd) in Sun Solaris 10 and OpenSolaris snv_50 through snv_104 does not properly check permissions, which allows local users to gain privileges and obtain sensitive information via unspecified vectors.
gitweb/gitweb.perl in gitweb in Git 1.6.x before 1.6.0.6, 1.5.6.x before 1.5.6.6, 1.5.5.x before 1.5.5.6, 1.5.4.x before 1.5.4.7, and other versions after 1.4.3 allows local repository owners to execute arbitrary commands by modifying the diff.external configuration variable and executing a crafted gitweb query.
Unspecified vulnerability in Script Editor in Mac OS X 10.4.11 and 10.5.5 allows local users to cause the scripting dictionary to be written to arbitrary locations, related to an "insecure file operation" on temporary files.
fs/open.c in the Linux kernel before 2.6.22 does not properly strip setuid and setgid bits when there is a write to a file, which allows local users to gain the privileges of a different group, and obtain sensitive information or possibly have unspecified other impact, by creating an executable file in a setgid directory through the (1) truncate or (2) ftruncate function in conjunction with memory-mapped I/O.