In cPanel before 67.9999.103, the backup system overwrites root's home directory when a mount disappears (SEC-299).

cPanel before 68.0.15 writes home-directory backups to an incorrect location (SEC-309).

The name service cache daemon (nscd) in Sun Solaris 10 and OpenSolaris snv_50 through snv_104 does not properly check permissions, which allows local users to gain privileges and obtain sensitive information via unspecified vectors.

hald in Sun OpenSolaris snv_51 through snv_130 does not have the proc_audit privilege during unspecified attempts to write to the auditing log, which makes it easier for physically proximate attackers to avoid detection of changes to the set of connected hardware devices supporting the Hardware Abstraction Layer (HAL) specification.

Unspecified vulnerability in Condor before 7.0.5 allows attackers to execute jobs as other users via unknown vectors.

In Arista's MOS (Metamako Operating System) software which is supported on the 7130 product line, under certain conditions, the bash shell might be accessible to unprivileged users in situations where they should not have access. This issue affects: Arista Metamako Operating System All releases in the MOS-0.1x train MOS-0.26.6 and below releases in the MOS-0.2x train MOS-0.31.1 and below releases in the MOS-0.3x train

The Shibboleth authentication module 5.x before 5.x-3.4 and 6.x before 6.x-3.2, a module for Drupal, does not properly remove statically granted privileges after a logout or other session change, which allows physically proximate attackers to gain privileges by using an unattended web browser.

The Self Tuning Memory Manager (STMM) component in IBM DB2 9.1 before FP8, 9.5 before FP5, and 9.7 before FP1 uses 0666 permissions for the STMM log file, which allows local users to cause a denial of service or have unspecified other impact by writing to this file.

dasauto in IBM DB2 8 before FP18, 9.1 before FP8, 9.5 before FP4, and 9.7 before FP1 permits execution by unprivileged user accounts, which has unspecified impact and local attack vectors.

A vulnerability in the restricted shell of the Cisco Identity Services Engine (ISE) that is accessible via SSH could allow an authenticated, local attacker to run arbitrary CLI commands with elevated privileges. The vulnerability is due to incomplete input validation of the user input for CLI commands issued at the restricted shell. An attacker could exploit this vulnerability by authenticating to the targeted device and executing commands that could lead to elevated privileges. An attacker would need valid user credentials to the device to exploit this vulnerability. The vulnerability affects the following Cisco Identity Services Engine (ISE) products running Release 1.4, 2.0, 2.0.1, 2.1.0: ISE, ISE Express, ISE Virtual Appliance. Cisco Bug IDs: CSCve74916.

A vulnerability in the guest shell feature of Cisco NX-OS System Software could allow an authenticated, local attacker to read and send packets outside the scope of the guest shell container. An attacker would need valid administrator credentials to perform this attack. The vulnerability is due to insufficient internal security measures in the guest shell feature. An attacker could exploit this vulnerability by sending or receiving packets on the device-internal network outside of the guest shell container, aka "Unauthorized Internal Interface Access." This vulnerability affects the following products running Cisco NX-OS System Software: Nexus 3000 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules. Cisco Bug IDs: CSCvf33038.

A vulnerability in the Open Agent Container (OAC) feature of Cisco Nexus Series Switches could allow an unauthenticated, local attacker to read and send packets outside the scope of the OAC. The vulnerability is due to insufficient internal security measures in the OAC feature. An attacker could exploit this vulnerability by crafting specific packets for communication on the device-internal network. A successful exploit could allow the attacker to run code on the underlying host operating system. OAC is not enabled by default. For a device to be vulnerable, an administrator would need to install and activate this feature. This vulnerability affects the following Cisco Nexus Series Switches: Nexus 2000 Series Fabric Extenders, Nexus 5000 Series Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches. Cisco Bug IDs: CSCve53542, CSCvf36621.

incron 0.5.5 does not initialize supplementary groups when running a process from a user's incrontabs, which causes the process to be run with the incrond supplementary groups and allows local users to gain privileges via an incrontab table.

IBM DB2 8.1 before FP18 allows attackers to obtain unspecified access via a das command.

The kernel in NetBSD, probably 5.0.1 and earlier, on x86 platforms does not properly handle a pre-commit failure of the iret instruction, which might allow local users to gain privileges via vectors related to a tempEIP pseudocode variable that is outside of the code-segment limits.

nilfs-utils before 2.0.14 installs multiple programs with unnecessary setuid privileges, which allows local users to execute arbitrary commands via the device string in a -c command line option to mkfs.nilfs2.

On Windows endpoints, the SecureConnector agent must run under the local SYSTEM account or another administrator account in order to enable full functionality of the agent. The typical configuration is for the agent to run as a Windows service under the local SYSTEM account. The SecureConnector agent runs various plugin scripts and executables on the endpoint in order to gather and report information about the host to the CounterACT management appliance. The SecureConnector agent downloads these scripts and executables as needed from the CounterACT management appliance and runs them on the endpoint. By default, these executable files are downloaded to and run from the %TEMP% directory of the currently logged on user, despite the fact that the SecureConnector agent is running as SYSTEM. Aside from the downloaded scripts, the SecureConnector agent runs a batch file with SYSTEM privileges from the temp directory of the currently logged on user. If the naming convention of this script can be derived, which is made possible by placing it in a directory to which the user has read access, it may be possible overwrite the legitimate batch file with a malicious one before SecureConnector executes it. It is possible to change this directory by setting the the configuration property config.script_run_folder.value in the local.properties configuration file on the CounterACT management appliance, however the batch file which is run does not follow this property.

xvfb-run 1.6.1 in Debian GNU/Linux, Ubuntu, Fedora 10, and possibly other operating systems place the magic cookie (MCOOKIE) on the command line, which allows local users to gain privileges by listing the process and its arguments.

razorCMS before 0.4 uses weak permissions for (1) admin/core/admin_config.php, which allows local users to obtain the administrator's password hash and FTP user credentials; and (2) the root directory, (3) datastore/, and (4) admin/core/, which allows local users to have an unspecified impact.

The kill_something_info function in kernel/signal.c in the Linux kernel before 2.6.28 does not consider PID namespaces when processing signals directed to PID -1, which allows local users to bypass the intended namespace isolation, and send arbitrary signals to all processes in all namespaces, via a kill command.

It was discovered that EAP packages in certain versions of Red Hat Enterprise Linux use incorrect permissions for /etc/sysconfig/jbossas configuration files. The file is writable to jboss group (root:jboss, 664). On systems using classic /etc/init.d init scripts (i.e. on Red Hat Enterprise Linux 6 and earlier), the file is sourced by the jboss init script and its content executed with root privileges when jboss service is started, stopped, or restarted.

Microsoft Office 2008 for Mac, when running on Macintosh systems that restrict Office access to administrators, does not enforce this restriction for user ID 502, which allows local users with that ID to bypass intended security policy and access Office programs, related to permissions and ownership for certain directories.

Linux-PAM before 1.0.4 does not enforce the minimum password age (MINDAYS) as specified in /etc/shadow, which allows local users to bypass intended security policy and change their passwords sooner than specified.

Multiple vulnerabilities in the CLI parser of Cisco IOS XE Software could allow an authenticated, local attacker to gain access to the underlying Linux shell of an affected device and execute arbitrary commands with root privileges on the device. The vulnerabilities are due to the affected software improperly sanitizing command arguments to prevent access to internal data structures on a device. An attacker who has user EXEC mode (privilege level 1) access to an affected device could exploit these vulnerabilities on the device by executing CLI commands that contain crafted arguments. A successful exploit could allow the attacker to gain access to the underlying Linux shell of the affected device and execute arbitrary commands with root privileges on the device. Cisco Bug IDs: CSCtw85441, CSCus42252, CSCuv95370.

An elevation of privilege vulnerability in the NVIDIA GPU driver. Product: Android. Versions: Android kernel. Android ID: A-31799863. References: N-CVE-2016-8482.

Russ Allbery pam-krb5 before 3.13, as used by libpam-heimdal, su in Solaris 10, and other software, does not properly handle calls to pam_setcred when running setuid, which allows local users to overwrite and change the ownership of arbitrary files by setting the KRB5CCNAME environment variable, and then launching a setuid application that performs certain pam_setcred operations.

The Windows installer that the Apache CouchDB team provides was vulnerable to local privilege escalation. All files in the install inherit the file permissions of the parent directory and therefore a non-privileged user can substitute any executable for the nssm.exe service launcher, or CouchDB batch or binary files. A subsequent service or server restart will then run that binary with administrator privilege. This issue affected CouchDB 2.0.0 (Windows platform only) and was addressed in CouchDB 2.0.0.1.

Jboss jbossas before versions 5.2.0-23, 6.4.13, 7.0.5 is vulnerable to an unsafe file handling in the jboss init script which could result in local privilege escalation.

A vulnerability in the administrative shell of Cisco AsyncOS on Cisco Email Security Appliance (ESA) and Content Security Management Appliance (SMA) could allow an authenticated, local attacker to escalate their privilege level and gain root access. The attacker has to have a valid user credential with at least a privilege level of a guest user. The vulnerability is due to an incorrect networking configuration at the administrative shell CLI. An attacker could exploit this vulnerability by authenticating to the targeted device and issuing a set of crafted, malicious commands at the administrative shell. An exploit could allow the attacker to gain root access on the device. Cisco Bug IDs: CSCvb34303, CSCvb35726.

Robin Rawson-Tetley Animal Shelter Manager (ASM) before 2.2.2 does not properly enforce the privileges of user accounts, which allows local users to bypass intended access restrictions by (1) opening unspecified screens, related to the "double click selector bug"; or modifying a (2) animal, (3) owner, (4) lost/found, (5) diary note, (6) owner donation, or (7) waiting list record, related to "change permissions" and the "new UI."

gitweb/gitweb.perl in gitweb in Git 1.6.x before 1.6.0.6, 1.5.6.x before 1.5.6.6, 1.5.5.x before 1.5.5.6, 1.5.4.x before 1.5.4.7, and other versions after 1.4.3 allows local repository owners to execute arbitrary commands by modifying the diff.external configuration variable and executing a crafted gitweb query.

This vulnerability allows an attacker to use the Mozilla Maintenance Service to escalate privilege by having the Maintenance Service invoke the Mozilla Updater to run malicious local files. This vulnerability requires local system access and is a variant of MFSA2013-44. Note: this issue only affects Windows operating systems. This vulnerability affects Firefox < 50.

fs/open.c in the Linux kernel before 2.6.22 does not properly strip setuid and setgid bits when there is a write to a file, which allows local users to gain the privileges of a different group, and obtain sensitive information or possibly have unspecified other impact, by creating an executable file in a setgid directory through the (1) truncate or (2) ftruncate function in conjunction with memory-mapped I/O.

Unspecified vulnerability in Script Editor in Mac OS X 10.4.11 and 10.5.5 allows local users to cause the scripting dictionary to be written to arbitrary locations, related to an "insecure file operation" on temporary files.

The do_splice_from function in fs/splice.c in the Linux kernel before 2.6.27 does not reject file descriptors that have the O_APPEND flag set, which allows local users to bypass append mode and make arbitrary changes to other locations in the file.

Unspecified vulnerability in the DB2 Administration Server (DAS) in the Core DAS function component in IBM DB2 9.1 before Fixpak 5 allows local users to gain privileges, aka a "FILE CREATION VULNERABILITY." NOTE: this may be the same as CVE-2007-5664.

verifydb in Ingres 2.6, Ingres 2006 release 1 (aka 9.0.4), and Ingres 2006 release 2 (aka 9.1.0) on Linux and other Unix platforms sets the ownership or permissions of an iivdb.log file without verifying that it is the application's own log file, which allows local users to overwrite arbitrary files by creating a symlink with an iivdb.log filename.

arch/i386/kernel/sysenter.c in the Virtual Dynamic Shared Objects (vDSO) implementation in the Linux kernel before 2.6.21 does not properly check boundaries, which allows local users to gain privileges or cause a denial of service via unspecified vectors, related to the install_special_mapping, syscall, and syscall32_nopage functions.

A vulnerability in the web-based GUI of Cisco UCS Director 6.0.0.0 and 6.0.0.1 could allow an authenticated, local attacker to execute arbitrary workflow items with just an end-user profile, a Privilege Escalation Vulnerability. The vulnerability is due to improper role-based access control (RBAC) after the Developer Menu is enabled in Cisco UCS Director. An attacker could exploit this vulnerability by enabling Developer Mode for his/her user profile with an end-user profile and then adding new catalogs with arbitrary workflow items to his/her profile. An exploit could allow an attacker to perform any actions defined by these workflow items, including actions affecting other tenants. Cisco Bug IDs: CSCvb64765.

The rmtree function in lib/File/Path.pm in Perl 5.10 does not properly check permissions before performing a chmod, which allows local users to modify the permissions of arbitrary files via a symlink attack, a different vulnerability than CVE-2005-0448 and CVE-2004-0452.

Untrusted search path vulnerability in VideoLAN VLC before 0.9.0 allows local users to execute arbitrary code via a malicious library under the modules/ or plugins/ subdirectories of the current working directory.

The RBAC functionality in grsecurity before 2.1.11-2.6.24.5 and 2.1.11-2.4.36.2 does not enforce user_transition_deny and user_transition_allow rules for the (1) sys_setfsuid and (2) sys_setfsgid calls, which allows local users to bypass restrictions for those calls.

Unspecified vulnerability in Alias Manager in Apple Mac OS X 10.5.1 and earlier on Intel platforms allows local users to gain privileges or cause a denial of service (memory corruption and application crash) by resolving an alias that contains crafted AFP volume mount information.

NFSv4 in the Linux kernel 2.6.18, and possibly other versions, does not properly clean up an inode when an O_EXCL create fails, which causes files to be created with insecure settings such as setuid bits, and possibly allows local users to gain privileges, related to the execution of the do_open_permission function even when a create fails.

Untrusted search path vulnerability in a certain Red Hat build script for Standards Based Linux Instrumentation for Manageability (sblim) libraries before 1-13a.el4_6.1 in Red Hat Enterprise Linux (RHEL) 4, and before 1-31.el5_2.1 in RHEL 5, allows local users to gain privileges via a malicious library in a certain subdirectory of /var/tmp, related to an incorrect RPATH setting, as demonstrated by a malicious libc.so library for tog-pegasus.

Apple Mac OS X before 10.5 uses weak permissions for the User Template directory, which allows local users to gain privileges by inserting a Trojan horse file into this directory.

The NtUserConsoleControl function in win32k.sys in Microsoft Windows XP SP2 and SP3, and Server 2003 before SP1, allows local administrators to bypass unspecified "security software" and gain privileges via a crafted call that triggers an overwrite of an arbitrary memory location. NOTE: the vendor disputes the significance of this report, stating that 'the Administrator to SYSTEM "escalation" is not a security boundary we defend.

The Repair Permissions tool in Disk Utility in Apple Mac OS X 10.4.11 adds the setuid bit to the emacs executable file, which allows local users to gain privileges by executing commands within emacs.

Red Hat Directory Server 7.1 before SP4 uses insecure permissions for certain directories, which allows local users to modify JAR files and execute arbitrary code via unknown vectors.

Image Capture in Apple Mac OS X before 10.5 does not properly use temporary files, which allows local users to overwrite arbitrary files, and display images that are being resized by this application.