Symantec Industrial Control System Protection (ICSP), versions 6.x.x, may be susceptible to an unauthorized access issue that could potentially allow a threat actor to create or modify application user accounts without proper authentication.

The remote console in the Server Controller in IBM Lotus Domino 7.x and 8.x verifies credentials against a file located at a UNC share pathname specified by the client, which allows remote attackers to bypass authentication, and consequently execute arbitrary code, by placing this pathname in the COOKIEFILE field. NOTE: this might overlap CVE-2011-0920.

The Java Servlet framework on Cisco TelePresence Recording Server devices with software 1.6.x before 1.6.2 and Cisco TelePresence Multipoint Switch (CTMS) devices with software 1.0.x, 1.1.x, 1.5.x, and 1.6.x does not require administrative authentication for unspecified actions, which allows remote attackers to execute arbitrary code via a crafted request, aka Bug IDs CSCtf42005 and CSCtf42008.

The helpmanager servlet in the web server in HP OpenView Performance Insight (OVPI) 5.4 and earlier does not properly authenticate and validate requests, which allows remote attackers to execute arbitrary commands via vectors involving upload of a JSP document.

It was discovered that the Western Digital My Cloud device before 2.30.196 is affected by an authentication bypass vulnerability. An unauthenticated attacker can exploit this vulnerability to authenticate as an admin user without needing to provide a password, thereby gaining full control of the device. (Whenever an admin logs into My Cloud, a server-side session is created that is bound to the user's IP address. After the session is created, it is possible to call authenticated CGI modules by sending the cookie username=admin in the HTTP request. The invoked CGI will check if a valid session is present and bound to the user's IP address.) It was found that it is possible for an unauthenticated attacker to create a valid session without a login. The network_mgr.cgi CGI module contains a command called "cgi_get_ipv6" that starts an admin session -- tied to the IP address of the user making the request -- if the additional parameter "flag" with the value "1" is provided. Subsequent invocation of commands that would normally require admin privileges now succeed if an attacker sets the username=admin cookie.

In Drobo 5N2 4.0.5, all optional applications lack any form of authentication/authorization validation. As a result, any user capable of accessing the device over the network may interact with and control these applications. This not only poses a severe risk to the availability of these applications, but also poses severe risks to the confidentiality and integrity of data stored within the applications and the device itself.

The Internet Authentication Service (IAS) in Microsoft Windows Vista SP2 and Server 2008 SP2 does not properly validate MS-CHAP v2 Protected Extensible Authentication Protocol (PEAP) authentication requests, which allows remote attackers to execute arbitrary code via crafted structures in a malformed request, aka "Internet Authentication Service Memory Corruption Vulnerability."

IBM FlashSystem 900 product GUI allows a specially crafted attack to bypass the authentication requirements of the system, resulting in the ability to remotely change the superuser password. This can be used by an attacker to gain administrative control or to deny service. IBM X-Force ID: 150296.

A command execution vulnerability in SonicWall GMS 9.3 allows a remote unauthenticated attacker to locally escalate privilege to root.

Anyterm Daemon in Infoblox Network Automation NetMRI before NETMRI-23483 allows remote attackers to execute arbitrary commands with root privileges via a crafted terminal/anyterm-module request.

userHandler.cgi in RaidSonic ICY BOX NAS firmware 2.3.2.IB.2.RS.1 allows remote attackers to bypass authentication and gain administrator privileges by setting the login parameter to admin. NOTE: the provenance of this information is unknown; the details are obtained solely from third party information.

Unspecified vulnerability in SimpleIrcBot before 1.0 Stable has unknown impact and attack vectors related to an "auth vulnerability."

An authentication bypass flaw was found in the smart_proxy_dynflow component used by Foreman. A malicious attacker can use this flaw to remotely execute arbitrary commands on machines managed by vulnerable Foreman instances, in a highly privileged context.

TIBCO Enterprise Administrator 1.0.0 and Enterprise Administrator SDK 1.0.0 do not properly enforce administrative authentication requirements, which allows remote attackers to execute arbitrary commands via unspecified vectors.

The administrative interface in Allied Telesis AT-RG634A ADSL Broadband router 3.3+, iMG624A firmware 3.5, iMG616LH firmware 2.4, and iMG646BD firmware 3.5 allows remote attackers to gain privileges and execute arbitrary commands via a direct request to cli.html.

Wi2be SMART HP WMT R1.2.20_201400922 allows unauthorized remote attackers to reset the admin password via the /ConfigWizard/ChangePwd.esp?2admin URL (Attackers can login using the "admin" username with password "admin" after a successful attack).

Siemens SpeedStream 5200 with NetPort Software 1.1 allows remote attackers to bypass authentication via an invalid Host header, possibly involving a trailing dot in the hostname.

The Java Glassfish Admin Console in HP Executive Scorecard 9.40 and 9.41 does not require authentication, which allows remote attackers to execute arbitrary code via a session on TCP port 10001, aka ZDI-CAN-2116.

Unify OpenStage/OpenScape Desk Phone IP SIP before V3 R3.11.0 has an authentication bypass in the default mode of the Workpoint Interface

openshift-ansible before versions 3.9.23, 3.7.46 deploys a misconfigured etcd file that causes the SSL client certificate authentication to be disabled. Quotations around the values of ETCD_CLIENT_CERT_AUTH and ETCD_PEER_CLIENT_CERT_AUTH in etcd.conf result in etcd being configured to allow remote users to connect without any authentication if they can access the etcd server bound to the network on the master nodes. An attacker could use this flaw to read and modify all the data about the Openshift cluster in the etcd datastore, potentially adding another compute node, or bringing down the entire cluster.

ASUS HG100 devices with firmware before 1.05.12 allow unauthenticated access, leading to remote command execution.

This vulnerability allows remote attackers to bypass authentication on vulnerable installations of Quest NetVault Backup 11.2.0.13. The specific flaw exists within JSON RPC Request handling. By setting the checksession parameter to a specific value, it is possible to bypass authentication to critical functions. An attacker can leverage this in conjunction with other vulnerabilities to execute arbitrary code in the context of SYSTEM. Was ZDI-CAN-4752.

An issue was discovered in WildFly 10.1.2.Final. It is possible for an attacker to access the administration panel on TCP port 9990 without any authentication using "anonymous" access that is automatically created. Once logged in, a misconfiguration present by default (auto-deployment) permits an anonymous user to deploy a malicious .war file, leading to remote code execution. NOTE: the vendor indicates that anonymous access is not available in the default installation; however, it remains optional because there are several use cases for it, including development environments and network architectures that have a proxy server for access control to the WildFly server

A vulnerability in Trend Micro InterScan Web Security Virtual Appliance 6.5 SP2 could allow an attacker to manipulate system updates using a combination of CSRF bypass (CVE-2020-8461) and authentication bypass (CVE-2020-8464) to execute code as user root.

A security vulnerability has been identified in the HPE Edgeline Infrastructure Manager, also known as HPE Edgeline Infrastructure Management Software. The vulnerability could be remotely exploited to bypass remote authentication leading to execution of arbitrary commands, gaining privileged access, causing denial of service, and changing the configuration.

A vulnerability, which was classified as critical, was found in LB-LINK BL-AC1900, BL-AC2100_AZ3, BL-AC3600, BL-AX1800, BL-AX5400P and BL-WR9000 up to 20250702. Affected is the function reboot/restore of the file /cgi-bin/lighttpd.cgi of the component Web Interface. The manipulation leads to improper authentication. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Dell iDRAC9 versions 5.00.00.00 and later but prior to 5.10.10.00, contain an improper authentication vulnerability. A remote unauthenticated attacker may potentially exploit this vulnerability to gain access to the VNC Console.

An issue was discovered in dnaTools dnaLIMS 4-2015s13. dnaLIMS is vulnerable to unauthenticated command execution through an improperly protected administrative web shell (cgi-bin/dna/sysAdmin.cgi POST requests).

An issue was discovered on Crestron HD-MD4X2-4K-E 1.0.0.2159 devices. When the administrative web interface of the HDMI switcher is accessed unauthenticated, user credentials are disclosed that are valid to authenticate to the web interface. Specifically, aj.html sends a JSON document with uname and upassword fields.

AIRTAME HDMI dongle with firmware before 2.2.0 allows unauthenticated access to a big part of the management interface. It is possible to extract all information including the Wi-Fi password, reboot, or force a software update at an arbitrary time.

On certain Brother devices, authorization is mishandled by including a valid AuthCookie cookie in the HTTP response to a failed login attempt. Affected models are: MFC-J6973CDW MFC-J4420DW MFC-8710DW MFC-J4620DW MFC-L8850CDW MFC-J3720 MFC-J6520DW MFC-L2740DW MFC-J5910DW MFC-J6920DW MFC-L2700DW MFC-9130CW MFC-9330CDW MFC-9340CDW MFC-J5620DW MFC-J6720DW MFC-L8600CDW MFC-L9550CDW MFC-L2720DW DCP-L2540DW DCP-L2520DW HL-3140CW HL-3170CDW HL-3180CDW HL-L8350CDW HL-L2380DW ADS-2500W ADS-1000W ADS-1500W.

The "Java Update" feature for Java Runtime Environment (JRE) for Sun JDK and JRE 6 Update 10 and earlier; JDK and JRE 5.0 Update 16 and earlier; and SDK and JRE 1.4.2_18 and earlier does not verify the signature of the JRE that is downloaded, which allows remote attackers to execute arbitrary code via DNS man-in-the-middle attacks.

In PrestaShop from version 1.5.0.0 and before version 1.7.6.6, the authentication system is malformed and an attacker is able to forge requests and execute admin commands. The problem is fixed in 1.7.6.6.

The ASUS DSL-N17U modem with firmware 1.1.0.2 allows attackers to access the admin interface by changing the admin password without authentication via a POST request to Advanced_System_Content.asp with the uiViewTools_username=admin&uiViewTools_Password= and uiViewTools_PasswordConfirm= substrings.

A vulnerability in session management for the web-based interface of Cisco Small Business Smart and Managed Switches could allow an unauthenticated, remote attacker to defeat authentication protections and gain unauthorized access to the management interface. The attacker could obtain the privileges of the highjacked session account, which could include administrator privileges on the device. The vulnerability is due to the use of weak entropy generation for session identifier values. An attacker could exploit this vulnerability to determine a current session identifier through brute force and reuse that session identifier to take over an ongoing session. In this way, an attacker could take actions within the management interface with privileges up to the level of the administrative user.

An issue was discovered on Fujitsu Eternus Storage DX200 S4 devices through 2020-11-25. After logging into the portal as a root user (using any web browser), the portal can be accessed with root privileges when the URI cgi-bin/csp?cspid={XXXXXXXXXX}&csppage=cgi_PgOverview&csplang=en is visited from a different web browser.

TestLink before 1.7.1 does not enforce an unspecified authorization mechanism, which has unknown impact and attack vectors.

A vulnerability in the web-based GUI of Cisco Mobility Express 1800 Series Access Points could allow an unauthenticated, remote attacker to bypass authentication. The attacker could be granted full administrator privileges. The vulnerability is due to improper implementation of authentication for accessing certain web pages using the GUI interface. An attacker could exploit this vulnerability by sending a crafted HTTP request to the web interface of the affected system. A successful exploit could allow the attacker to bypass authentication and perform unauthorized configuration changes or issue control commands to the affected device. This vulnerability affects Cisco Mobility Express 1800 Series Access Points running a software version prior to 8.2.110.0. Cisco Bug IDs: CSCuy68219.

EMC Network Configuration Manager (NCM) 9.3.x, EMC Network Configuration Manager (NCM) 9.4.0.x, EMC Network Configuration Manager (NCM) 9.4.1.x, EMC Network Configuration Manager (NCM) 9.4.2.x contains a Java RMI Remote Code Execution vulnerability that could potentially be exploited by malicious users to compromise the affected system.

An improper authentication vulnerability has been reported to affect QNAP device running Video Station. If exploited, this vulnerability allows attackers to compromise the security of the system. We have already fixed this vulnerability in the following versions of Video Station: Video Station 5.5.9 and later Video Station 5.3.13 and later Video Station 5.1.8 and later

An improper authentication vulnerability has been reported to affect QNAP device running Photo Station. If exploited, this vulnerability allows attackers to compromise the security of the system. We have already fixed this vulnerability in the following versions of Photo Station: Photo Station 6.0.20 ( 2022/02/15 ) and later Photo Station 5.7.16 ( 2022/02/11 ) and later Photo Station 5.4.13 ( 2022/02/11 ) and later

Sysaid – Sysaid System Takeover - An attacker can bypass the authentication process by accessing to: /wmiwizard.jsp, Then to: /ConcurrentLogin.jsp, then click on the login button, and it will redirect you to /home.jsp without any authentication.

WAPM-1166D firmware Ver.1.2.7 and earlier, WAPM-APG600H firmware Ver.1.16.1 and earlier allows remote attackers to bypass authentication and access the configuration interface via unspecified vectors.

A flaw was found in Linux-Pam in versions prior to 1.5.1 in the way it handle empty passwords for non-existing users. When the user doesn't exist PAM try to authenticate with root and in the case of an empty password it successfully authenticate.

The initial admin account setup wizard on Lexmark devices allow unauthenticated access to the “out of service erase” feature.

By using a specific credential string, an attacker with network access to the device’s web interface could circumvent the authentication scheme and perform administrative operations.

Podcast Producer in Apple Mac OS X 10.5 before 10.5.6 allows remote attackers to bypass authentication and gain administrative access via unspecified vectors.