A vulnerability in the web-based user interface (Web UI) of Cisco IOS XE Software could allow an authenticated, remote attacker to execute commands on the underlying Linux shell of an affected device with root privileges. The vulnerability occurs because the affected software improperly sanitizes user-supplied input. An attacker who has valid administrator access to an affected device could exploit this vulnerability by supplying a crafted input parameter on a form in the Web UI and then submitting that form. A successful exploit could allow the attacker to run arbitrary commands on the device with root privileges, which may lead to complete system compromise.

A vulnerability in the Cisco SD-WAN Solution could allow an authenticated, remote attacker to overwrite arbitrary files on the underlying operating system of an affected device. The vulnerability is due to improper input validation of the save command in the CLI of the affected software. An attacker could exploit this vulnerability by modifying the save command in the CLI of an affected device. A successful exploit could allow the attacker to overwrite arbitrary files on the underlying operating system of an affected device and escalate their privileges to the root user.

A vulnerability in the web-based management interface of Cisco Small Business RV320 and RV325 Dual Gigabit WAN VPN Routers could allow an authenticated, remote attacker with administrative privileges on an affected device to execute arbitrary commands. The vulnerability is due to improper validation of user-supplied input. An attacker could exploit this vulnerability by sending malicious HTTP POST requests to the web-based management interface of an affected device. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux shell as root. Cisco has released firmware updates that address this vulnerability.

A flaw was found in the CloudForms management engine version 5.10 and CloudForms management version 5.11, which triggered remote code execution through NFS schedule backup. An attacker logged into the management console could use this flaw to execute arbitrary shell commands on the CloudForms server as root.

hotfix_upload.cgi in Trend Micro Deep Discovery Inspector (DDI) 3.7, 3.8 SP1 (3.81), and 3.8 SP2 (3.82) allows remote administrators to execute arbitrary code via shell metacharacters in the filename parameter of the Content-Disposition header.

The Threat Management Console in Cisco Firepower Management Center 5.2.0 through 6.0.1 allows remote authenticated users to execute arbitrary commands via crafted web-application parameters, aka Bug ID CSCva30872.

A File Inclusion vulnerability exists in act parameter to admin.php in UseBB before 1.0.12.

The device management command line interface (CLI) in Palo Alto Networks PAN-OS before 5.0.18, 5.1.x before 5.1.11, 6.0.x before 6.0.13, 6.1.x before 6.1.10, and 7.0.x before 7.0.5H2 allows remote authenticated administrators to execute arbitrary OS commands via an SSH command parameter.

Microsoft Windows Server 2008 SP2 and R2 SP1 and Windows Server 2012 Gold and R2 allow remote authenticated users to execute arbitrary code via a crafted NetLogon request, aka "Windows Netlogon Memory Corruption Remote Code Execution Vulnerability."

Cisco RV180 and RV180W devices allow remote authenticated users to execute arbitrary commands as root via a crafted HTTP request, aka Bug ID CSCuz48592.

The web framework in Cisco Unified Computing System (UCS) Performance Manager 2.0.0 and earlier allows remote authenticated users to execute arbitrary commands via crafted parameters in a GET request, aka Bug ID CSCuy07827.

manager.c in the Manager Interface in Asterisk Open Source 1.4.x before 1.4.40.1, 1.6.1.x before 1.6.1.25, 1.6.2.x before 1.6.2.17.3, and 1.8.x before 1.8.3.3 and Asterisk Business Edition C.x.x before C.3.6.4 does not properly check for the system privilege, which allows remote authenticated users to execute arbitrary commands via an Originate action that has an Async header in conjunction with an Application header.

The administrative web interface in Cisco Prime Infrastructure (PI) before 3.1.1 allows remote authenticated users to execute arbitrary commands via crafted field values, aka Bug ID CSCuy96280.

In cPanel before 57.9999.54, /scripts/addpop and /scripts/delpop exposed TTYs (SEC-113).

A vulnerability in the web UI of the Cisco Firepower Management Center (FMC) could allow an authenticated, remote attacker to execute arbitrary commands on an affected device. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending crafted input to the web UI. A successful exploit could allow the attacker to execute arbitrary commands within the affected device.

A vulnerability in the web-based management interface of Cisco Firepower Management Center (FMC) Software could allow an authenticated, remote attacker to execute arbitrary code on the underlying operating system of an affected device. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending malicious commands to the web-based management interface of an affected device. A successful exploit could allow the attacker to execute arbitrary code on the underlying operating system of the affected device.

cPanel before 60.0.25 allows arbitrary code execution via Maketext in PostgreSQL adminbin (SEC-188).

cPanel before 55.9999.141 allows arbitrary code execution in the context of the root account because of MakeText interpolation (SEC-89).

Apache Struts 2.x before 2.3.28 allows remote attackers to execute arbitrary code via a "%{}" sequence in a tag attribute, aka forced double OGNL evaluation.

A vulnerability in the web UI of the Cisco Firepower Management Center (FMC) could allow an authenticated, remote attacker to execute arbitrary commands on an affected device. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending crafted input to the web UI. A successful exploit could allow the attacker to execute arbitrary commands within the affected device.

Apache CouchDB administrative users can configure the database server via HTTP(S). Due to insufficient validation of administrator-supplied configuration settings via the HTTP API, it is possible for a CouchDB administrator user to escalate their privileges to that of the operating system's user that CouchDB runs under, by bypassing the blacklist of configuration settings that are not allowed to be modified via the HTTP API. This privilege escalation effectively allows an existing CouchDB admin user to gain arbitrary remote code execution, bypassing already disclosed CVE-2017-12636. Mitigation: All users should upgrade to CouchDB releases 1.7.2 or 2.1.2.

In cPanel before 57.9999.54, /scripts/enablefileprotect exposed TTYs (SEC-117).

Multiple unspecified API endpoints in Jenkins before 1.650 and LTS before 1.642.2 allow remote authenticated users to execute arbitrary code via serialized data in an XML file, related to XStream and groovy.util.Expando.

A remote code exection vulnerability was identified in HPE Intelligent Management Center (IMC) PLAT earlier than version 7.3 E0506P09.

The network proxy page on the web portal for the Zoom On-Premise Meeting Connector Controller before version 4.6.365.20210703, Zoom On-Premise Meeting Connector MMR before version 4.6.365.20210703, Zoom On-Premise Recording Connector before version 3.8.45.20210703, Zoom On-Premise Virtual Room Connector before version 4.4.6868.20210703, and Zoom On-Premise Virtual Room Connector Load Balancer before version 2.5.5496.20210703 fails to validate input sent in requests to set the network proxy password. This could lead to remote command injection by a web portal administrator.

A remote code execution vulnerability was identified in HPE Intelligent Management Center (IMC) PLAT earlier than version 7.3 E0506P09.

A Remote Code Execution vulnerability in HPE Intelligent Management Center (iMC) PLAT version PLAT 7.3 (E0504) was found. The problem was resolved in HPE Intelligent Management Center PLAT v7.3 (E0506) or any subsequent version.

A Remote Code Execution vulnerability in HPE Intelligent Management Center (iMC) PLAT version PLAT 7.3 (E0504) was found. The problem was resolved in HPE Intelligent Management Center PLAT v7.3 (E0506) or any subsequent version.

A remote code execution vulnerability was identified in HPE Intelligent Management Center (IMC) PLAT earlier than version 7.3 E0506P09.

The files_external app in ownCloud Server before 7.0.9, 8.0.x before 8.0.7, and 8.1.x before 8.1.2 allows remote authenticated users to instantiate arbitrary classes and possibly execute arbitrary code via a crafted mount point option, related to "objectstore."

A crafted configuration packet sent by an authenticated administrative user can be used to execute arbitrary commands in system context. This issue also affects installations of the VRM, DIVAR IP, BVMS with VRM installed, the VIDEOJET decoder (VJD-7513 and VJD-8000).

Quest KACE, all versions prior to version 8.0.x, 8.1.x, and 9.0.x, allows unintentional access to the appliance leveraging functions of the troubleshooting tools located in the administrator user interface.

A remote code execution vulnerability exists when Windows Hyper-V on a host server fails to properly validate input from an authenticated user on a guest operating system. To exploit the vulnerability, an attacker could run a specially crafted application on a guest operating system that could cause the Hyper-V host operating system to execute arbitrary code. An attacker who successfully exploited the vulnerability could execute arbitrary code on the host operating system. The security update addresses the vulnerability by correcting how Hyper-V validates guest operating system user input.

A remote code execution vulnerability exists when Windows Hyper-V Network Switch on a host server fails to properly validate input from an authenticated user on a guest operating system, aka 'Hyper-V Remote Code Execution Vulnerability'. This CVE ID is unique from CVE-2019-0719.

An input validation vulnerability in CA Privileged Access Manager 2.x allows unprivileged users to execute arbitrary commands by passing specially crafted arguments to the update_crld script.

In Lenovo xClarity Administrator versions earlier than 2.1.0, an authenticated LXCA user can, under specific circumstances, inject additional parameters into a specific web API call which can result in privileged command execution within LXCA's underlying operating system.

Bamboo did not correctly check if a configured Mercurial repository URI contained values that the Windows operating system may consider argument parameters. An attacker who has permission to create a repository in Bamboo, edit an existing plan in Bamboo that has a non-linked Mercurial repository, or create a plan in Bamboo either globally or in a project using Bamboo Specs can can execute code of their choice on systems that run a vulnerable version of Bamboo on the Windows operating system. All versions of Bamboo starting with 2.7.0 before 6.3.3 (the fixed version for 6.3.x) and from version 6.4.0 before 6.4.1 (the fixed version for 6.4.x) running on the Windows operating system are affected by this vulnerability.

A Code Execution vulnerability exists in Android prior to 4.4.0 related to the addJavascriptInterface method and the accessibility and accessibilityTraversal objects, which could let a remote malicious user execute arbitrary code.

Java Method Server (JMS) in EMC Documentum Content Server before 6.7SP1 P32, 6.7SP2 before P25, 7.0 before P19, 7.1 before P16, and 7.2 before P02 allows remote authenticated users to execute arbitrary code by forging a signature for a query string that lacks the method_verb parameter.

The administrative web interface in Cisco WebEx Meetings Server 1.0 through 1.5 allows remote authenticated users to execute arbitrary OS commands with root privileges via unspecified fields, aka Bug ID CSCuj40460.

The ViewPoint web application in Dell SonicWALL Global Management System (GMS) before 7.2 SP2, SonicWALL Analyzer before 7.2 SP2, and SonicWALL UMA before 7.2 SP2 allows remote authenticated users to execute arbitrary code via unspecified vectors.

An issue was discovered in the firewall3 component in Inteno IOPSYS 1.0 through 3.16. The attacker must make a JSON-RPC method call to add a firewall rule as an "include" and point the "path" argument to a malicious script or binary. This gets executed as root when the firewall changes are committed.

Digi TransPort LR54 4.4.0.26 and possible earlier devices have Improper Input Validation that allows users with 'super' CLI access privileges to bypass a restricted shell and execute arbitrary commands as root.

A flaw was found in PolicyKit (aka polkit) 0.115 that allows a user with a uid greater than INT_MAX to successfully execute any systemctl command.

An Improper Input Validation vulnerability in J-Web of Juniper Networks Junos OS allows a locally authenticated J-Web attacker to escalate their privileges to root over the target device. This issue affects: Juniper Networks Junos OS All versions prior to 18.3R3-S5; 18.4 versions prior to 18.4R3-S9; 19.1 versions prior to 19.1R3-S6; 19.2 versions prior to 19.2R3-S3; 19.3 versions prior to 19.3R3-S3; 19.4 versions prior to 19.4R3-S5; 20.1 versions prior to 20.1R3-S1; 20.2 versions prior to 20.2R3-S2; 20.3 versions prior to 20.3R3-S1; 20.4 versions prior to 20.4R3; 21.1 versions prior to 21.1R2, 21.1R3; 21.2 versions prior to 21.2R1-S1, 21.2R2;

jsdm/ajax/port.php in J-Web in Juniper Junos before 10.4R13, 11.4 before 11.4R7, 12.1 before 12.1R5, 12.2 before 12.2R3, and 12.3 before 12.3R1 allows remote authenticated users to execute arbitrary commands via the rsargs parameter in an exec action.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV016, RV042, RV042G, RV082, RV320, and RV325 Routers could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. These vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on an affected device.

Multiple vulnerabilities in Cisco SD-WAN products could allow an authenticated attacker to perform command injection attacks against an affected device, which could allow the attacker to take certain actions with root privileges on the device. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the web UI of Cisco Smart Software Manager Satellite could allow an unauthenticated, remote attacker to execute arbitrary commands on the underlying operating system. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV016, RV042, RV042G, RV082, RV320, and RV325 Routers could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. These vulnerabilities are due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system. To exploit these vulnerabilities, an attacker would need to have valid administrator credentials on an affected device.