A vulnerability in the RADIUS authentication module of Cisco Policy Suite could allow an unauthenticated, remote attacker to be authorized as a subscriber without providing a valid password; however, the attacker must provide a valid username. The vulnerability is due to incorrect RADIUS user credential validation. An attacker could exploit this vulnerability by attempting to access a Cisco Policy Suite domain configured with RADIUS authentication. An exploit could allow the attacker to be authorized as a subscriber without providing a valid password. This vulnerability affects the Cisco Policy Suite application running a release prior to 13.1.0 with Hotfix Patch 1 when RADIUS authentication is configured for a domain. Cisco Policy Suite Release 14.0.0 is also affected, as it includes vulnerable code, but RADIUS authentication is not officially supported in Cisco Policy Suite Releases 14.0.0 and later. Cisco Bug IDs: CSCvg40124.

An Improper Authentication issue was discovered in Envitech EnviDAS Ultimate Versions prior to v1.0.0.5. The web application lacks proper authentication which could allow an attacker to view information and modify settings or execute code remotely.

Zoho ManageEngine Desktop Central before build 10.0.647 allows a single authentication secret from multiple agents to communicate with the server.

The default configuration of Cisco Small Business IP phones SPA 300 7.5.5 and SPA 500 7.5.5 does not properly support authentication, which allows remote attackers to read audio-stream data or originate telephone calls via a crafted XML request, aka Bug ID CSCuo52482.

A Two-Factor Authentication Bypass Vulnerability exists in BS-Client Private Client 2.4 and 2.5 via an XML request that neglects the use of ADPswID and AD parameters, which could let a malicious user access privileged function.

The I-O DATA TS-WLCAM camera with firmware 1.06 and earlier, TS-WLCAM/V camera with firmware 1.06 and earlier, TS-WPTCAM camera with firmware 1.08 and earlier, TS-PTCAM camera with firmware 1.08 and earlier, TS-PTCAM/POE camera with firmware 1.08 and earlier, and TS-WLC2 camera with firmware 1.02 and earlier allow remote attackers to bypass authentication, and consequently obtain sensitive credential and configuration data, via unspecified vectors.

IKEv2 in strongSwan 4.0.7 before 5.1.3 allows remote attackers to bypass authentication by rekeying an IKE_SA during (1) initiation or (2) re-authentication, which triggers the IKE_SA state to be set to established.

Use of Password Hash Instead of Password for Authentication vulnerability in Mitsubishi Electric MELSEC iQ-F series FX5U(C) CPU all versions, Mitsubishi Electric MELSEC iQ-F series FX5UJ CPU all versions, Mitsubishi Electric MELSEC iQ-R series R00/01/02CPU all versions, Mitsubishi Electric MELSEC iQ-R series R04/08/16/32/120(EN)CPU all versions, Mitsubishi Electric MELSEC iQ-R series R08/16/32/120SFCPU all versions, Mitsubishi Electric MELSEC iQ-R series R08/16/32/120PCPU all versions, Mitsubishi Electric MELSEC iQ-R series R08/16/32/120PSFCPU all versions, Mitsubishi Electric MELSEC iQ-R series R16/32/64MTCPU all versions, Mitsubishi Electric MELSEC iQ-R series RJ71C24(-R2/R4) all versions, Mitsubishi Electric MELSEC iQ-R series RJ71EN71 all versions, Mitsubishi Electric MELSEC iQ-R series RJ71GF11-T2 all versions, Mitsubishi Electric MELSEC iQ-R series RJ71GP21(S)-SX all versions, Mitsubishi Electric MELSEC iQ-R series RJ72GF15-T2 all versions, Mitsubishi Electric MELSEC Q series Q03UDECPU all versions, Mitsubishi Electric MELSEC Q series Q04/06/10/13/20/26/50/100UDEHCPU all versions, Mitsubishi Electric MELSEC Q series Q03/04/06/13/26UDVCPU all versions, Mitsubishi Electric MELSEC Q series Q04/06/13/26UDPVCPU all versions, Mitsubishi Electric MELSEC Q series QJ71C24N(-R2/R4) all versions, Mitsubishi Electric MELSEC Q series QJ71E71-100 all versions, Mitsubishi Electric MELSEC L series L02/06/26CPU(-P) all versions, Mitsubishi Electric MELSEC L series L26CPU-(P)BT all versions, Mitsubishi Electric MELSEC L series LJ71C24(-R2) all versions, Mitsubishi Electric MELSEC L series LJ71E71-100 all versions and Mitsubishi Electric MELSEC L series LJ72GF15-T2 all versions allows a remote unauthenticated attacker to disclose or tamper with the information in the product by using an eavesdropped password hash.

The wp_validate_auth_cookie function in wp-includes/pluggable.php in WordPress before 3.7.2 and 3.8.x before 3.8.2 does not properly determine the validity of authentication cookies, which makes it easier for remote attackers to obtain access via a forged cookie.

The default configuration in cURL and libcurl 7.10.6 before 7.36.0 re-uses (1) SCP, (2) SFTP, (3) POP3, (4) POP3S, (5) IMAP, (6) IMAPS, (7) SMTP, (8) SMTPS, (9) LDAP, and (10) LDAPS connections, which might allow context-dependent attackers to connect as other users via a request, a similar issue to CVE-2014-0015.

An Incorrect Access Control vulnerability has been identified in Citrix XenMobile Server 10.8.0 before Rolling Patch 6 and 10.9.0 before Rolling Patch 3. An attacker can impersonate and take actions on behalf of any Mobile Application Management (MAM) enrolled device.

admin/management.html in PineApp Mail-SeCure allows remote attackers to bypass authentication and perform a sys_usermng operation via the it parameter.

Authentication bypass vulnerability in portal/account/register.php in versions of OpenEMR before 5.0.1.4 allows a remote attacker to access (1) portal/add_edit_event_user.php, (2) portal/find_appt_popup_user.php, (3) portal/get_allergies.php, (4) portal/get_amendments.php, (5) portal/get_lab_results.php, (6) portal/get_medications.php, (7) portal/get_patient_documents.php, (8) portal/get_problems.php, (9) portal/get_profile.php, (10) portal/portal_payment.php, (11) portal/messaging/messages.php, (12) portal/messaging/secure_chat.php, (13) portal/report/pat_ledger.php, (14) portal/report/portal_custom_report.php, or (15) portal/report/portal_patient_report.php without authenticating as a patient.

An issue was discovered in myStrom WiFi Switch V1 before 2.66, WiFi Switch V2 before 3.80, WiFi Switch EU before 3.80, WiFi Bulb before 2.58, WiFi LED Strip before 3.80, WiFi Button before 2.73, and WiFi Button Plus before 2.73. Devices did not authenticate themselves to the cloud in device to cloud communication. This lack of device authentication allowed an attacker to impersonate any device by guessing or learning their MAC address.

fileadmin.php in Libra File Manager (aka Libra PHP File Manager) 1.18 and earlier allows remote attackers to bypass authentication, and read arbitrary files, modify arbitrary files, and list arbitrary directories, by inserting certain user and isadmin parameters in the query string.

YzmCMS v6.3 is affected by broken access control. Without login, unauthorized access to the user's personal home page can be realized. It is necessary to judge the user's login status before accessing the personal home page, but the vulnerability can access other users' home pages through the non login status because real authentication is not carried out.

constants.inc in EZWebAlbum 1.0 allows remote attackers to bypass authentication and gain administrator privileges by setting the photoalbumadmin cookie, as demonstrated via addpage.php.

An issue was discovered in Hyland OnBase 16.0.2.83 and below, 17.0.2.109 and below, 18.0.0.37 and below, 19.8.16.1000 and below and 20.3.10.1000 and below. Client-side authentication is used for critical functions such as adding users or retrieving sensitive information.

A vulnerability was found in libssh's server-side state machine before versions 0.7.6 and 0.8.4. A malicious client could create channels without first performing authentication, resulting in unauthorized access.

Envoy is a cloud-native high-performance edge/middle/service proxy. In Envoy version 1.17.0 an attacker can bypass authentication by presenting a JWT token with an issuer that is not in the provider list when Envoy's JWT Authentication filter is configured with the `allow_missing` requirement under `requires_any` due to a mistake in implementation. Envoy's JWT Authentication filter can be configured with the `allow_missing` requirement that will be satisfied if JWT is missing (JwtMissed error) and fail if JWT is presented or invalid. Due to a mistake in implementation, a JwtUnknownIssuer error was mistakenly converted to JwtMissed when `requires_any` was configured. So if `allow_missing` was configured under `requires_any`, an attacker can bypass authentication by presenting a JWT token with an issuer that is not in the provider list. Integrity may be impacted depending on configuration if the JWT token is used to protect against writes or modifications. This regression was introduced on 2020/11/12 in PR 13839 which fixed handling `allow_missing` under RequiresAny in a JwtRequirement (see issue 13458). The AnyVerifier aggregates the children verifiers' results into a final status where JwtMissing is the default error. However, a JwtUnknownIssuer was mistakenly treated the same as a JwtMissing error and the resulting final aggregation was the default JwtMissing. As a result, `allow_missing` would allow a JWT token with an unknown issuer status. This is fixed in version 1.17.1 by PR 15194. The fix works by preferring JwtUnknownIssuer over a JwtMissing error, fixing the accidental conversion and bypass with `allow_missing`. A user could detect whether a bypass occurred if they have Envoy logs enabled with debug verbosity. Users can enable component level debug logs for JWT. The JWT filter logs will indicate that there is a request with a JWT token and a failure that the JWT token is missing.

ManageEngine Applications Manager 8.1 build 8100 does not check authentication for monitorType.do and unspecified other pages, which allows remote attackers to obtain sensitive information and change settings via unspecified vectors. NOTE: the provenance of this information is unknown; the details are obtained solely from third party information.

BEA WebLogic Server and WebLogic Express 6.1 through 10.0 allows remote attackers to bypass authentication for application servlets via crafted request headers.

Uebimiau Webmail 2.7.10 and 2.7.2 does not protect authentication state variables from being set through HTTP requests, which allows remote attackers to bypass authentication via a sess[auth]=1 parameter settting. NOTE: this can be leveraged to conduct directory traversal attacks without authentication by using CVE-2008-0140.

HTTP File Server (HFS) before 2.2c allows remote attackers to append arbitrary text to the log file by using the base64 representation of this text during HTTP Basic Authentication.

An authentication bypass vulnerability exists in the GlobalProtect SSL VPN component of Palo Alto Networks PAN-OS software that allows an attacker to bypass all client certificate checks with an invalid certificate. A remote attacker can successfully authenticate as any user and gain access to restricted VPN network resources when the gateway or portal is configured to rely entirely on certificate-based authentication. Impacted features that use SSL VPN with client certificate verification are: GlobalProtect Gateway, GlobalProtect Portal, GlobalProtect Clientless VPN In configurations where client certificate verification is used in conjunction with other authentication methods, the protections added by the certificate check are ignored as a result of this issue. This issue impacts: PAN-OS 8.1 versions earlier than PAN-OS 8.1.17; PAN-OS 9.0 versions earlier than PAN-OS 9.0.11; PAN-OS 9.1 versions earlier than PAN-OS 9.1.5; PAN-OS 10.0 versions earlier than PAN-OS 10.0.1.

An Authentication Bypass vulnerability in Cisco WebEx Meetings Server could allow an unauthenticated, remote attacker to access limited meeting information on the Cisco WebEx Meetings Server. More Information: CSCvd50728. Known Affected Releases: 2.6 2.7 2.8 CWMS-2.5MR1 Orion1.1.2.patch T29_orion_merge.

It was found that the REST API in Infinispan before version 9.0.0 did not properly enforce auth constraints. An attacker could use this vulnerability to read or modify data in the default cache or a known cache name.

in Scratch Login (MediaWiki extension) before version 1.1, any account can be logged into by using the same username with leading, trailing, or repeated underscore(s), since those are treated as whitespace and trimmed by MediaWiki. This affects all users on any wiki using this extension. Since version 1.1, comments by users whose usernames would be trimmed on MediaWiki are ignored when searching for the verification code.

In Spree before versions 3.7.11, 4.0.4, or 4.1.11, expired user tokens could be used to access Storefront API v2 endpoints. The issue is patched in versions 3.7.11, 4.0.4 and 4.1.11. A workaround without upgrading is described in the linked advisory.

Apache Axis2 allows remote attackers to forge messages and bypass authentication via a SAML assertion that lacks a Signature element, aka a "Signature exclusion attack," a different vulnerability than CVE-2012-4418.

The (1) reports API and (2) administration feature in the comments API in the Ushahidi Platform before 2.5 do not require authentication, which allows remote attackers to generate reports and organize comments via API functions.

The ABUS Secvest FUMO50110 hybrid module does not have any security mechanism that ensures confidentiality or integrity of RF packets that are exchanged with an alarm panel. This makes it easier to conduct wAppLoxx authentication-bypass attacks.

An improper authentication vulnerability in CA Privileged Access Manager 3.x Web-UI jk-manager and jk-status allows a remote attacker to gain sensitive information or alter configuration.

The search and replay servers in IBM Tealeaf Customer Experience 8.0 through 9.0.2 allow remote attackers to bypass authentication via unspecified vectors. IBM X-Force ID: 105896.

ECOA BAS controller suffers from an authentication bypass vulnerability. An unauthenticated attacker through cookie poisoning can remotely bypass authentication and disclose sensitive information and circumvent physical access controls in smart homes and buildings and manipulate HVAC.

Authentication Bypass by Primary Weakness in GitHub repository adodb/adodb prior to 5.20.21.

A Missing Authentication in Critical Function in Bosch IP cameras allows an unauthenticated remote attacker to extract sensitive information or change settings of the camera by sending crafted requests to the device. Only devices of the CPP6, CPP7 and CPP7.3 family with firmware 7.70, 7.72, and 7.80 prior to B128 are affected by this vulnerability. Versions 7.62 or lower and INTEOX cameras are not affected.

VMware Carbon Black Cloud Workload appliance 1.0.0 and 1.01 has an authentication bypass vulnerability that may allow a malicious actor with network access to the administrative interface of the VMware Carbon Black Cloud Workload appliance to obtain a valid authentication token. Successful exploitation of this issue would result in the attacker being able to view and alter administrative configuration settings.

PrestaShop is a fully scalable open source e-commerce solution. In PrestaShop before version 1.7.2 the soft logout system is not complete and an attacker is able to foreign request and executes customer commands. The problem is fixed in 1.7.7.2

CRIXP OpenCRX version 4.30 and 5.0-20200717 and prior suffers from an unverified password change vulnerability. An attacker who is able to connect to the affected OpenCRX instance can change the password of any user, including admin-Standard, to any chosen value. This issue was resolved in version 5.0-20200904, released September 4, 2020.

In Opencast before 7.6 and 8.1, using a remember-me cookie with an arbitrary username can cause Opencast to assume proper authentication for that user even if the remember-me cookie was incorrect given that the attacked endpoint also allows anonymous access. This way, an attacker can, for example, fake a remember-me token, assume the identity of the global system administrator and request non-public content from the search service without ever providing any proper authentication. This problem is fixed in Opencast 7.6 and Opencast 8.1

IBM Security Guardium Insights 2.0.1 could allow an attacker to obtain sensitive information or perform unauthorized actions due to improper authenciation mechanisms. IBM X-Force ID: 174403.