Western Digital WD My Cloud v04.05.00-320 devices embed the session token (aka PHPSESSID) in filenames, which makes it easier for attackers to bypass authentication by listing a directory. NOTE: this can be exploited in conjunction with CVE-2018-7171 for remote authentication bypass within a product that uses My Cloud.

An authentication bypass vulnerability exists in the Green Electronics RainMachine Mini-8 (2nd Generation) and Touch HD 12 web application allowing an unauthenticated attacker to perform authenticated actions on the device via a 127.0.0.1:port value in the HTTP 'Host' header, as demonstrated by retrieving credentials.

The IBM Tivoli Storage Manager (IBM Spectrum Protect 7.1 and 8.1) default authentication protocol is vulnerable to a brute force attack due to disclosing too much information during authentication. An attacker could gain user or administrative access to the TSM server. IBM X-Force ID: 118750.

A vulnerability exists in Schneider Electric's Pelco Sarix Professional in all firmware versions prior to 3.29.67 which could allow retrieving of specially crafted URLs without authentication that can reveal sensitive information to an attacker.

The Password Manager Extension in Abine Blur 7.8.242* before 7.8.2428 allows attackers to bypass the Multi-Factor Authentication and macOS disk-encryption protection mechanisms, and consequently exfiltrate secured data, because the right-click context menu is not secured.

A vulnerability classified as problematic was found in Lucky LM-520-SC, LM-520-FSC and LM-520-FSC-SAM up to 20250321. Affected by this vulnerability is an unknown functionality. The manipulation leads to missing authentication. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in eGauge EG3000 Energy Monitor 3.6.3. It has been classified as problematic. This affects an unknown part of the component Setting Handler. The manipulation leads to missing authentication. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

An issue was discovered in Kabona AB WebDatorCentral (WDC) application prior to Version 3.4.0. WDC does not limit authentication attempts that may allow a brute force attack method.

A vulnerability has been identified in TeleControl Server Basic < V3.1. An attacker with network access to the TeleControl Server Basic's port 8000/tcp could bypass the authentication mechanism and read limited information.

An issue was discovered in Hitachi Vantara Pentaho through 9.1 and Pentaho Business Intelligence Server through 7.x. The Security Model has different layers of Access Control. One of these layers is the applicationContext security, which is defined in the applicationContext-spring-security.xml file. The default configuration allows an unauthenticated user with no previous knowledge of the platform settings to extract pieces of information without possessing valid credentials.

Containous Traefik 1.6.x before 1.6.6, when --api is used, exposes the configuration and secret if authentication is missing and the API's port is publicly reachable.

vRealize Operations for Horizon Adapter (6.7.x prior to 6.7.1 and 6.6.x prior to 6.6.1) has an improper trust store configuration leading to authentication bypass. An unauthenticated remote attacker who has network access to vRealize Operations, with the Horizon Adapter running, may be able to bypass Adapter authentication.

IBM Spectrum Protect Operations Center 8.1.0.000 through 8.1.10.and 7.1.0.000 through 7.1.11 could allow a remote attacker to obtain sensitive information, caused by improper authentication of a websocket endpoint. By using known tools to subscribe to the websocket event stream, an attacker could exploit this vulnerability to obtain sensitive information. IBM X-Force ID: 188993.

The "Security and Privacy" Encryption feature in Mailpile before 1.0.0rc4 does not exclude disabled, revoked, and expired keys.

An issue was discovered in Foxit E-mail advertising system before September 2018. It allows authentication bypass and information disclosure, related to Interspire Email Marketer.

In Knowage through 6.1.1, an unauthenticated user can bypass access controls and access the entire application.

The Stripe API v1 allows remote attackers to bypass intended access restrictions by replaying api.stripe.com /v1/tokens XMLHttpRequest data, parsing the response under the object card{}, and reading the cvc_check information if the creation is successful without charging the actual card used in the transaction.

Cobham Satcom Sailor 250 and 500 devices before 1.25 contained an unauthenticated password reset vulnerability. This could allow modification of any user account's password (including the default "admin" account), without prior knowledge of their password. All that is required is knowledge of the username and attack vector (/index.lua?pageID=Administration usernameAdmChange, passwordAdmChange1, and passwordAdmChange2 fields).

In PHP Proxy 3.0.3, any user can read files from the server without authentication due to an index.php?q=file:/// LFI URI, a different vulnerability than CVE-2018-19246.

LCDS Laquis SCADA prior to version 4.1.0.4150 allows an authentication bypass, which may allow an attacker access to sensitive data.

A vulnerability was found in jeecg-boot 3.5.0 and classified as critical. This issue affects some unknown processing of the component API Documentation. The manipulation leads to improper authentication. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-224699.

An issue was discovered on Foscam C2 devices with System Firmware 1.11.1.8 and Application Firmware 2.72.1.32, and Opticam i5 devices with System Firmware 1.5.2.11 and Application Firmware 2.21.1.128. The FTP and RTSP services make it easier for attackers to conduct brute-force authentication attacks, because failed-authentication limits apply only to HTTP (not FTP or RTSP).

An issue was discovered in CIRCONTROL CirCarLife before 4.3. There is PLC status disclosure due to lack of authentication for /html/devstat.html.

A vulnerability in the API subsystem of Cisco Meetings App could allow an unauthenticated, remote attacker to retain and reuse the Traversal Using Relay NAT (TURN) server credentials that are configured in an affected system. The vulnerability is due to insufficient protection mechanisms for the TURN server credentials. An attacker could exploit this vulnerability by intercepting the legitimate traffic that is generated by an affected system. An exploit could allow the attacker to obtain the TURN server credentials, which the attacker could use to place audio/video calls and forward packets through the configured TURN server. The attacker would not be able to take control of the TURN server unless the same credentials were used in multiple systems.

EasyIO EasyIO-30P devices before 2.0.5.27 have Incorrect Access Control, related to webuser.js.

LG SuperSign CMS allows authentication bypass because the CAPTCHA requirement is skipped if a captcha:pass cookie is sent, and because the PIN is limited to four digits.

Improper authentication in Citrix XenMobile Server 10.12 before RP2, Citrix XenMobile Server 10.11 before RP4, Citrix XenMobile Server 10.10 before RP6 and Citrix XenMobile Server before 10.9 RP5 leads to the ability to access sensitive files.

Rockwell Automation MicroLogix 1400 Controllers Series B v21.001 and prior, Series A, all versions, MicroLogix 1100 Controller, all versions, RSLogix 500 Software v12.001 and prior, A remote, unauthenticated attacker can send a request from the RSLogix 500 software to the victim’s MicroLogix controller. The controller will then respond to the client with used password values to authenticate the user on the client-side. This method of authentication may allow an attacker to bypass authentication altogether, disclose sensitive information, or leak credentials.

The tqsl_verifyDataBlock function in openssl_cert.cpp in American Radio Relay League (ARRL) tqsllib 2.0 does not properly check the return value from the OpenSSL EVP_VerifyFinal function, which allows remote attackers to bypass validation of the certificate chain via a malformed SSL/TLS signature, a similar vulnerability to CVE-2008-5077.

Sun GridEngine 5.3 and earlier does not properly check the return value from the OpenSSL EVP_VerifyFinal function, which allows remote attackers to bypass validation of the certificate chain via a malformed SSL/TLS signature for DSA and ECDSA keys, a similar vulnerability to CVE-2008-5077.

NetComm Wireless G LTE Light Industrial M2M Router (NWL-25) with firmware 2.0.29.11 and prior. The device allows access to configuration files and profiles without authenticating the user.

Improper authentication vulnerability in Cybozu Garoon 4.0.0 to 4.10.3 allows remote attackers to obtain data in the affected product via the API.

Improper authentication vulnerability in Cybozu Garoon 4.0.0 to 4.10.3 allows remote attackers to obtain data in Application Menu.

Unraid 6.8.0 allows authentication bypass.

An issue was discovered in Descor Infocad FM before 3.1.0.0. An unauthenticated web service allows the retrieval of files on the web server and on reachable SMB servers.

The WebUI of PHOENIX CONTACT FL SWITCH 3xxx, 4xxx, 48xx versions prior to 1.35 is vulnerable to brute-force attacks, because of Improper Restriction of Excessive Authentication Attempts.

An issue was discovered on D-Link DIR-809 A1 through 1.09, A2 through 1.11, and Guest Zone through 1.09 devices. One can bypass authentication mechanisms to download the configuration file.

Incorrect access control in the Dashboard API on Drobo 5N2 NAS version 4.0.5-13.28.96115 allows attackers to bypass authentication due to insecure token generation.

Moxa Device Server Web Console 5232-N allows remote attackers to bypass authentication, and consequently modify settings and data, via vectors related to reading a cookie parameter containing a UserId value.

IBM BigFix Remote Control before 9.1.3 does not properly restrict failed login attempts, which makes it easier for remote attackers to obtain access via a brute-force approach.

plugins/crypto/openssl/crypto_openssl.c in Simple Linux Utility for Resource Management (aka SLURM or slurm-llnl) does not properly check the return value from the OpenSSL EVP_VerifyFinal function, which allows remote attackers to bypass validation of the certificate chain via a malformed SSL/TLS signature, a similar vulnerability to CVE-2008-5077.

jwt-go before 4.0.0-preview1 allows attackers to bypass intended access restrictions in situations with []string{} for m["aud"] (which is allowed by the specification). Because the type assertion fails, "" is the value of aud. This is a security problem if the JWT token is presented to a service that lacks its own audience check.

Moxa MiiNePort_E1_4641 devices with firmware 1.1.10 Build 09120714, MiiNePort_E1_7080 devices with firmware 1.1.10 Build 09120714, MiiNePort_E2_1242 devices with firmware 1.1 Build 10080614, MiiNePort_E2_4561 devices with firmware 1.1 Build 10080614, and MiiNePort E3 devices with firmware 1.0 Build 11071409 have a blank default password, which allows remote attackers to obtain access via unspecified vectors.

A vulnerability exists in the Aruba AirWave Management Platform 8.x prior to 8.2 in the management interface of an underlying system component called RabbitMQ, which could let a malicious user obtain sensitive information. This interface listens on TCP port 15672 and 55672

HAProxy statistics in openstack-tripleo-image-elements are non-authenticated over the network.

NTP 4.2.4 before 4.2.4p5 and 4.2.5 before 4.2.5p150 does not properly check the return value from the OpenSSL EVP_VerifyFinal function, which allows remote attackers to bypass validation of the certificate chain via a malformed SSL/TLS signature for DSA and ECDSA keys, a similar vulnerability to CVE-2008-5077.

The System Configuration Protocol (SCP) core messaging interface in Cisco Prime Network Registrar 8.2 before 8.2.3.1 and 8.3 before 8.3.2 allows remote attackers to obtain sensitive information via crafted SCP messages, aka Bug ID CSCuv35694.

Certain NETGEAR devices are affected by mishandling of repeated URL calls. This affects JNR1010v2 before 2017-01-06, WNR614 before 2017-01-06, WNR618 before 2017-01-06, JWNR2000v5 before 2017-01-06, WNR2020 before 2017-01-06, JWNR2010v5 before 2017-01-06, WNR1000v4 before 2017-01-06, WNR2020v2 before 2017-01-06, R6220 before 2017-01-06, and WNDR3700v5 before 2017-01-06.

The ABUS Secvest wireless alarm system FUAA50000 (v3.01.17) fails to properly authenticate some requests to its built-in HTTPS interface. Someone can use this vulnerability to obtain sensitive information from the system, such as usernames and passwords. This information can then be used to reconfigure or disable the alarm system.