An issue was discovered in the Linux kernel before 5.11.11. qrtr_recvmsg in net/qrtr/qrtr.c allows attackers to obtain sensitive information from kernel memory because of a partially uninitialized data structure, aka CID-50535249f624.
An issue was discovered in slc_bump in drivers/net/can/slcan.c in the Linux kernel 3.16 through 5.6.2. It allows attackers to read uninitialized can_frame data, potentially containing sensitive information from kernel stack memory, if the configuration lacks CONFIG_INIT_STACK_ALL, aka CID-b9258a2cece4.
An information leak flaw was found due to uninitialized memory in the Linux kernel's TIPC protocol subsystem, in the way a user sends a TIPC datagram to one or more destinations. This flaw allows a local user to read some kernel memory. This issue is limited to no more than 7 bytes, and the user cannot control what is read. This flaw affects the Linux kernel versions prior to 5.17-rc1.
The ib_uverbs_poll_cq function in drivers/infiniband/core/uverbs_cmd.c in the Linux kernel before 2.6.37 does not initialize a certain response buffer, which allows local users to obtain potentially sensitive information from kernel memory via vectors that cause this buffer to be only partially filled, a different vulnerability than CVE-2010-4649.
A vulnerability was found in the Linux kernel in versions prior to v5.14-rc1. Missing size validations on inbound SCTP packets may allow the kernel to read uninitialized memory.
net/can/bcm.c in the Linux kernel through 5.12.10 allows local users to obtain sensitive information from kernel stack memory because parts of a data structure are uninitialized.
The eql_g_master_cfg function in drivers/net/eql.c in the Linux kernel before 2.6.36-rc5 does not properly initialize a certain structure member, which allows local users to obtain potentially sensitive information from kernel stack memory via an EQL_GETMASTRCFG ioctl call.
In the Linux kernel before 5.2.9, there is an info-leak bug that can be caused by a malicious USB device in the drivers/net/can/usb/peak_usb/pcan_usb_pro.c driver, aka CID-ead16e53c2f0.
In the Linux kernel before 5.2.9, there is an info-leak bug that can be caused by a malicious USB device in the drivers/net/can/usb/peak_usb/pcan_usb_fd.c driver, aka CID-30a8beeb3042.
In the Linux kernel before 5.3.11, there is an info-leak bug that can be caused by a malicious USB device in the drivers/net/can/usb/peak_usb/pcan_usb_core.c driver, aka CID-f7a1337f0d29.
It was discovered that read_file() in apport/hookutils.py would follow symbolic links or open FIFOs. When this function is used by the openjdk-14 package apport hooks, it could expose private data to other local users.
It was discovered that read_file() in apport/hookutils.py would follow symbolic links or open FIFOs. When this function is used by the openjdk-8 package apport hooks, it could expose private data to other local users.
It was discovered that read_file() in apport/hookutils.py would follow symbolic links or open FIFOs. When this function is used by the xorg package apport hooks, it could expose private data to other local users.
Systems with microprocessors utilizing speculative execution and speculative execution of memory reads before the addresses of all prior memory writes are known may allow unauthorized disclosure of information to an attacker with local user access via a side-channel analysis, aka Speculative Store Bypass (SSB), Variant 4.
dovecot 1.0.7 in Red Hat Enterprise Linux (RHEL) 5, and possibly Fedora, uses world-readable permissions for dovecot.conf, which allows local users to obtain the ssl_key_password parameter value.
sound/core/timer.c in the Linux kernel through 4.6 does not initialize certain r1 data structures, which allows local users to obtain sensitive information from kernel stack memory via crafted use of the ALSA timer interface, related to the (1) snd_timer_user_ccallback and (2) snd_timer_user_tinterrupt functions.
The print_binder_ref_olocked function in drivers/android/binder.c in the Linux kernel 4.14.90 allows local users to obtain sensitive address information by reading " ref *desc *node" lines in a debugfs file.
It was discovered that read_file() in apport/hookutils.py would follow symbolic links or open FIFOs. When this function is used by the xorg-hwe-18.04 package apport hooks, it could expose private data to other local users.
In pam/gkr-pam-module.c in GNOME Keyring before 3.27.2, the user's password is kept in a session-child process spawned from the LightDM daemon. This can expose the credential in cleartext.
It was discovered that read_file() in apport/hookutils.py would follow symbolic links or open FIFOs. When this function is used by the openjdk-16 package apport hooks, it could expose private data to other local users.
The ext2_make_empty function call in the Linux kernel before 2.6.11.6 does not properly initialize memory when creating a block for a new directory entry, which allows local users to obtain potentially sensitive information by reading the block.
An issue was discovered in the Linux kernel before 4.18.11. The ipddp_ioctl function in drivers/net/appletalk/ipddp.c allows local users to obtain sensitive kernel address information by leveraging CAP_NET_ADMIN to read the ipddp_route dev and next fields via an SIOCFINDIPDDPRT ioctl call.
The hidma_chan_stats function in drivers/dma/qcom/hidma_dbg.c in the Linux kernel 4.14.90 allows local users to obtain sensitive address information by reading "callback=" lines in a debugfs file.
It was discovered that read_file() in apport/hookutils.py would follow symbolic links or open FIFOs. When this function is used by the openjdk-13 package apport hooks, it could expose private data to other local users.
The print_binder_transaction_ilocked function in drivers/android/binder.c in the Linux kernel 4.14.90 allows local users to obtain sensitive address information by reading "*from *code *flags" lines in a debugfs file.
An issue was discovered in the Linux kernel before 4.18.7. In create_qp_common in drivers/infiniband/hw/mlx5/qp.c, mlx5_ib_create_qp_resp was never initialized, resulting in a leak of stack memory to userspace.
kernel/bpf/verifier.c in the Linux kernel through 5.12.1 performs undesirable speculative loads, leading to disclosure of stack content via side-channel attacks, aka CID-801c6058d14a. The specific concern is not protecting the BPF stack area against speculative loads. Also, the BPF stack can contain uninitialized data that might represent sensitive information previously operated on by the kernel.
It was discovered that read_file() in apport/hookutils.py would follow symbolic links or open FIFOs. When this function is used by the openjdk-17 package apport hooks, it could expose private data to other local users.
Red Hat Certificate System 7.2 stores passwords in cleartext in the UserDirEnrollment log, the RA wizard installer log, and unspecified other debug log files, and uses weak permissions for these files, which allows local users to discover passwords by reading the files.
Software suspend 2 2-2.2.1, when used with the Linux kernel 2.6.16, stores pre-boot authentication passwords in the BIOS Keyboard buffer and does not clear this buffer after use, which allows local users to obtain sensitive information by reading the physical memory locations associated with this buffer.
KDE 3.2.x and 3.3.0 through 3.3.2, when saving credentials that are (1) manually entered by the user or (2) created by the SMB protocol handler, stores those credentials for plaintext in the user's .desktop file, which may be created with world-readable permissions, which could allow local users to obtain usernames and passwords for remote resources such as SMB shares.
Linux kernel does not properly convert 64-bit file offset pointers to 32 bits, which allows local users to access portions of kernel memory.
The function hso_get_config_data in drivers/net/usb/hso.c in the Linux kernel through 4.19.8 reads if_num from the USB device (as a u8) and uses it to index a small array, resulting in an object out-of-bounds (OOB) read that potentially allows arbitrary read in the kernel address space.
The patch_instruction function in hw/i386/kvmvapic.c in QEMU does not initialize the imm32 variable, which allows local guest OS administrators to obtain sensitive information from host stack memory by accessing the Task Priority Register (TPR).
The XFS file system code in Linux 2.4.x has an information leak in which in-memory data is written to the device for the XFS file system, which allows local users to obtain sensitive information by reading the raw device.
The linux 2.4 kernel before 2.4.19 assumes that the fninit instruction clears all registers, which could lead to an information leak on processors that do not clear all relevant SSE registers.
The proc_connectinfo function in drivers/usb/core/devio.c in the Linux kernel through 4.6 does not initialize a certain data structure, which allows local users to obtain sensitive information from kernel stack memory via a crafted USBDEVFS_CONNECTINFO ioctl call.
It was discovered that read_file() in apport/hookutils.py would follow symbolic links or open FIFOs. When this function is used by the openjdk-lts package apport hooks, it could expose private data to other local users.
Red Hat Certificate System 7.2 uses world-readable permissions for password.conf and unspecified other configuration files, which allows local users to discover passwords by reading these files.
The x86/fpu (Floating Point Unit) subsystem in the Linux kernel before 4.13.5, when a processor supports the xsave feature but not the xsaves feature, does not correctly handle attempts to set reserved bits in the xstate header via the ptrace() or rt_sigreturn() system call, allowing local users to read the FPU registers of other processes on the system, related to arch/x86/kernel/fpu/regset.c and arch/x86/kernel/fpu/signal.c.
It was discovered that read_file() in apport/hookutils.py would follow symbolic links or open FIFOs. When this function is used by the openjdk-15 package apport hooks, it could expose private data to other local users.
Red Hat Enterprise Virtualization (RHEV) Manager 3.6 allows local users to obtain encryption keys, certificates, and other sensitive information by reading the engine-setup log file.
QEMU 0.9.0 does not properly handle changes to removable media, which allows guest OS users to read arbitrary files on the host OS by using the diskformat: parameter in the -usbdevice option to modify the disk-image header to identify a different format, a related issue to CVE-2008-2004.
The sg_ioctl function in drivers/scsi/sg.c in the Linux kernel before 4.13.4 allows local users to obtain sensitive information from uninitialized kernel heap-memory locations via an SG_GET_REQUEST_TABLE ioctl call for /dev/sg0.
snapd 2.54.2 and earlier created ~/snap directories in user home directories without specifying owner-only permissions. This could allow a local attacker to read information that should have been private. Fixed in snapd versions 2.54.3+18.04, 2.54.3+20.04 and 2.54.3+21.10.1
The waitid implementation in kernel/exit.c in the Linux kernel through 4.13.4 accesses rusage data structures in unintended cases, which allows local users to obtain sensitive information, and bypass the KASLR protection mechanism, via a crafted system call.
LXD before 2.0.2 does not properly set permissions when switching an unprivileged container into privileged mode, which allows local users to access arbitrary world readable paths in the container directory via unspecified vectors.
A permissions flaw was found in redis, which sets weak permissions on certain files and directories that could potentially contain sensitive information. A local, unprivileged user could possibly use this flaw to access unauthorized system information.
/proc/tty/driver/serial in Linux 2.4.x reveals the exact number of characters used in serial links, which could allow local users to obtain potentially sensitive information such as the length of passwords.
The adjust_branches function in kernel/bpf/verifier.c in the Linux kernel before 4.5 does not consider the delta in the backward-jump case, which allows local users to obtain sensitive information from kernel memory by creating a packet filter and then loading crafted BPF instructions.