Multiple Buffer Overflow vulnerabilities in the Link Layer Discovery Protocol (LLDP) subsystem of Cisco IOS Software, Cisco IOS XE Software, and Cisco IOS XR Software could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition or execute arbitrary code with elevated privileges on an affected device. Cisco Bug IDs: CSCuo17183, CSCvd73487.

An Improper Restriction of Operations within the Bounds of a Memory Buffer issue was discovered in the Continental AG Infineon S-Gold 2 (PMB 8876) chipset on BMW several models produced between 2009-2010, Ford a limited number of P-HEV vehicles, Infiniti 2013 JX35, Infiniti 2014-2016 QX60, Infiniti 2014-2016 QX60 Hybrid, Infiniti 2014-2015 QX50, Infiniti 2014-2015 QX50 Hybrid, Infiniti 2013 M37/M56, Infiniti 2014-2016 Q70, Infiniti 2014-2016 Q70L, Infiniti 2015-2016 Q70 Hybrid, Infiniti 2013 QX56, Infiniti 2014-2016 QX 80, and Nissan 2011-2015 Leaf. A vulnerability in the temporary mobile subscriber identity (TMSI) may allow an attacker to access and control memory. This may allow remote code execution on the baseband radio processor of the TCU.

An issue was discovered on D-Link DCS-1100 and DCS-1130 devices. The device runs a custom daemon on UDP port 5978 which is called "dldps2121" and listens for broadcast packets sent on 255.255.255.255. This daemon handles custom D-Link UDP based protocol that allows D-Link mobile applications and desktop applications to discover D-Link devices on the local network. The binary processes the received UDP packets sent from any device in "main" function. One path in the function traverses towards a block of code that processing of packets which does an unbounded copy operation which allows to overflow the buffer. The custom protocol created by Dlink follows the following pattern: Packetlen, Type of packet; M=MAC address of device or broadcast; D=Device Type;C=base64 encoded command string;test=1111 We can see at address function starting at address 0x0000DBF8 handles the entire UDP packet and performs an insecure copy using strcpy function at address 0x0000DC88. This results in overflowing the stack pointer after 1060 characters and thus allows to control the PC register and results in code execution. The same form of communication can be initiated by any process including an attacker process on the mobile phone or the desktop and this allows a third-party application on the device to execute commands on the device without any authentication by sending just 1 UDP packet with custom base64 encoding.

A vulnerability in the Cisco Discovery Protocol implementation for Cisco Video Surveillance 8000 Series IP Cameras could allow an unauthenticated, adjacent attacker to execute arbitrary code on an affected device or cause the device to reload. This vulnerability is due to missing checks when an IP camera processes a Cisco Discovery Protocol packet. An attacker could exploit this vulnerability by sending a malicious Cisco Discovery Protocol packet to an affected device. A successful exploit could allow the attacker to execute code on the affected IP camera or cause it to reload unexpectedly, resulting in a denial of service (DoS) condition. Note: Cisco Discovery Protocol is a Layer 2 protocol. To exploit this vulnerability, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent).

A vulnerability in the Universal Plug-and-Play (UPnP) implementation in the Cisco CVR100W Wireless-N VPN Router could allow an unauthenticated, Layer 2-adjacent attacker to execute arbitrary code or cause a denial of service (DoS) condition. The remote code execution could occur with root privileges. The vulnerability is due to incomplete range checks of the UPnP input data, which could result in a buffer overflow. An attacker could exploit this vulnerability by sending a malicious request to the UPnP listening port of the targeted device. An exploit could allow the attacker to cause the device to reload or potentially execute arbitrary code with root privileges. This vulnerability affects all firmware releases of the Cisco CVR100W Wireless-N VPN Router prior to Firmware Release 1.0.1.22. Cisco Bug IDs: CSCuz72642.

Multiple D-Link devices including the DIR-850L firmware versions 1.14B07 and 2.07.B05 contain a stack-based buffer overflow vulnerability in the web administration interface HNAP service.

Buffer overflow in TS-WPTCAM firmware version 1.18 and earlier, TS-WPTCAM2 firmware version 1.00, TS-WLCE firmware version 1.18 and earlier, TS-WLC2 firmware version 1.18 and earlier, TS-WRLC firmware version 1.17 and earlier, TS-PTCAM firmware version 1.18 and earlier, TS-PTCAM/POE firmware version 1.18 and earlier allows remote attackers to execute arbitrary OS commands via unspecified vectors.

Improper input validation for GATT data packet received in Bluetooth Controller function can lead to possible memory corruption in Snapdragon Mobile in version QCA9379, SD 210/SD 212/SD 205, SD 410/12, SD 425, SD 427, SD 430, SD 435, SD 450, SD 615/16/SD 415, SD 625, SD 650/52, SD 820, SD 835, SD 845, SD 850, SDM630, SDM636, SDM660, SDM710, Snapdragon_High_Med_2016.

Multiple buffer overflows in the ndiswrapper module 1.53 for the Linux kernel 2.6 allow remote attackers to execute arbitrary code by sending packets over a local wireless network that specify long ESSIDs.

Heap-based buffer overflow in the dcerpc_read_ncacn_packet_done function in librpc/rpc/dcerpc_util.c in winbindd in Samba 3.x before 3.6.22, 4.0.x before 4.0.13, and 4.1.x before 4.1.3 allows remote AD domain controllers to execute arbitrary code via an invalid fragment length in a DCE-RPC packet.

A vulnerability was found in D-Link DI-8100 up to 20250523. It has been classified as critical. Affected is the function httpd_get_parm of the file /login.cgi of the component jhttpd. The manipulation of the argument notify leads to stack-based buffer overflow. The attack can only be initiated within the local network. The exploit has been disclosed to the public and may be used.

In Qualcomm Android for MSM, Firefox OS for MSM, and QRD Android with all Android releases from CAF using the Linux kernel before security patch level 2018-04-05, while processing a 802.11 management frame, a buffer overflow may potentially occur.

Buffer overflow in Corega CG-WGR1200 firmware 2.20 and earlier allows an attacker to execute arbitrary code via unspecified vectors.

Buffer overflow in Corega CG-WGR1200 firmware 2.20 and earlier allows an attacker to execute arbitrary commands via unspecified vectors.

Integer signedness error in the CIFSFindNext function in fs/cifs/cifssmb.c in the Linux kernel before 3.1 allows remote CIFS servers to cause a denial of service (memory corruption) or possibly have unspecified other impact via a large length value in a response to a read request for a directory.

A remote code execution vulnerability in the Android system (bluetooth). Product: Android. Versions: 4.4.4, 5.0.2, 5.1.1, 6.0, 6.0.1, 7.0, 7.1.1, 7.1.2, 8.0. Android ID: A-63146105.

Stack-based buffer overflow in the Broadcom BCMWL5.SYS wireless device driver 3.50.21.10, as used in Cisco Linksys WPC300N Wireless-N Notebook Adapter before 4.100.15.5 and other products, allows remote attackers to execute arbitrary code via an 802.11 response frame containing a long SSID field.

A vulnerability in the Link Layer Discovery Protocol (LLDP) subsystem of Cisco Nexus 9000 Series Application Centric Infrastructure (ACI) Mode Switch Software could allow an adjacent, unauthenticated attacker to cause a denial of service (DoS) condition or execute arbitrary code with root privileges. The vulnerability is due to improper input validation of certain type, length, value (TLV) fields of the LLDP frame header. An attacker could exploit this vulnerability by sending a crafted LLDP packet to the targeted device. A successful exploit may lead to a buffer overflow condition that could either cause a DoS condition or allow the attacker to execute arbitrary code with root privileges. Note: This vulnerability cannot be exploited by transit traffic through the device; the crafted packet must be targeted to a directly connected interface. This vulnerability affects Cisco Nexus 9000 Series Fabric Switches in ACI mode if they are running a Cisco Nexus 9000 Series ACI Mode Switch Software release prior to 13.2(7f) or any 14.x release.

Multiple buffer overflows in the Cisco Discovery Protocol (CDP) implementation in Cisco NX-OS on Nexus 7000 devices 4.x and 5.x before 5.2(4) and 6.x before 6.1(1), Nexus 5000 and 5500 devices 4.x and 5.x before 5.1(3)N1(1), Nexus 4000 devices before 4.1(2)E1(1h), Nexus 3000 devices 5.x before 5.0(3)U3(1), Nexus 1000V devices 4.x before 4.2(1)SV1(5.1), MDS 9000 devices 4.x and 5.x before 5.2(4), Unified Computing System (UCS) 6100 and 6200 devices before 2.0(2m), and Connected Grid Router (CGR) 1000 devices before CG4(1) allow remote attackers to execute arbitrary code via malformed CDP packets, aka Bug IDs CSCtu10630, CSCtu10551, CSCtu10550, CSCtw56581, CSCtu10548, CSCtu10544, and CSCuf61275.

Dell WES Wyse Device Agent versions prior to 14.1.2.9 and Dell Wyse ThinLinux HAgent versions prior to 5.4.55 00.10 contain a buffer overflow vulnerability. An unauthenticated attacker may potentially exploit this vulnerability to execute arbitrary code on the system with privileges of the FTP client by sending specially crafted input data to the affected system. The FTP code that contained the vulnerability has been removed.

A vulnerability was found in D-Link DI-8100 16.07.26A1. It has been rated as critical. This issue affects the function auth_asp of the file /auth.asp of the component jhttpd. The manipulation of the argument callback leads to stack-based buffer overflow. The attack needs to be approached within the local network. The exploit has been disclosed to the public and may be used.

On the Broadcom Wi-Fi HardMAC SoC with fbt firmware, a stack buffer overflow occurs when handling an 802.11r (FT) authentication response, leading to remote code execution via a crafted access point that sends a long R0KH-ID field in a Fast BSS Transition Information Element (FT-IE).

Buffer overflow in the PPP Access Concentrator (PPPAC) on the SEIL/x86 with firmware 1.00 through 1.61, SEIL/B1 with firmware 1.00 through 3.11, SEIL/X1 with firmware 1.00 through 3.11, SEIL/X2 with firmware 1.00 through 3.11, SEIL/Turbo with firmware 1.80 through 2.10, and SEIL/neu 2FE Plus with firmware 1.80 through 2.10 might allow remote attackers to execute arbitrary code via a PPPoE packet.

Improper validation of buffer length checks in the lwm2m device management protocol can leads to a buffer overflow in snapdragon mobile and snapdragon wear in versions MDM9206, MDM9607, SD 210/SD 212/SD 205, SD 425, SD 427, SD 430, SD 435, SD 450, SD 625, SD 636, SD 835, SDA660, SDM630, SDM660

While parsing over-the-air information elements in all Android releases from CAF using the Linux kernel (Android for MSM, Firefox OS for MSM, QRD Android) before security patch level 2018-07-05, the use of an out-of-range pointer offset can occur.

The Near Field Communication (NFC) module in Huawei Mate 9 Pro mobile phones with the versions before LON-AL00B 8.0.0.340a(C00) has a buffer overflow vulnerability due to the lack of input validation. An attacker may use an NFC card reader or another device to inject malicious data into a target mobile phone. Successful exploit could lead to system restart or arbitrary code execution.

Buffer overflow in HTTP handler in Intel Active Management Technology in Intel Converged Security Manageability Engine Firmware 3.x, 4.x, 5.x, 6.x, 7.x, 8.x, 9.x, 10.x, and 11.x may allow an attacker to execute arbitrary code via the same subnet.