Cisco PIX Private Link 4.1.6 and earlier does not properly process certain commands in the configuration file, which reduces the effective key length of the DES key to 48 bits instead of 56 bits, which makes it easier for an attacker to find the proper key via a brute force attack.

Web Cache Control Protocol (WCCP) in Cisco Cache Engine for Cisco IOS 11.2 and earlier does not use authentication, which allows remote attackers to redirect HTTP traffic to arbitrary hosts via WCCP packets to UDP port 2048.

The BVSMWeb portal in the web framework in Cisco Unified Communications Domain Manager (CDM) in Unified CDM Application Software before 10 does not properly implement access control, which allows remote attackers to modify user information via a crafted URL, aka Bug ID CSCum77041.

Cisco routers 9.17 and earlier allow remote attackers to bypass security restrictions via certain IP source routed packets that should normally be denied using the "no ip source-route" command.

A vulnerability in the Policy Builder database of Cisco Policy Suite before 18.2.0 could allow an unauthenticated, remote attacker to connect directly to the Policy Builder database. The vulnerability is due to a lack of authentication. An attacker could exploit this vulnerability by connecting directly to the Policy Builder database. A successful exploit could allow the attacker to access and change any data in the Policy Builder database. Cisco Bug IDs: CSCvh06134.

Cisco Catalyst 2900 Virtual LAN (VLAN) switches allow remote attackers to inject 802.1q frames into another VLAN by forging the VLAN identifier in the trunking tag.

The HTTP server in Cisco 7xx series routers 3.2 through 4.2 is enabled by default, which allows remote attackers to change the router's configuration.

A default configuration of CiscoSecure Access Control Server (ACS) allows remote users to modify the server database without authentication.

On Cisco DDR2200 ADSL2+ Residential Gateway DDR2200B-NA-AnnexA-FCC-V00.00.03.45.4E and DDR2201v1 ADSL2+ Residential Gateway DDR2201v1-NA-AnnexA-FCC-V00.00.03.28.3 devices, there is remote command execution via shell metacharacters in the pingAddr parameter to the waitPingqry.cgi URI. The command output is visible at /PingMsg.cmd.

On Cisco DDR2200 ADSL2+ Residential Gateway DDR2200B-NA-AnnexA-FCC-V00.00.03.45.4E and DDR2201v1 ADSL2+ Residential Gateway DDR2201v1-NA-AnnexA-FCC-V00.00.03.28.3 devices, there is no access control for info.html, wancfg.cmd, rtroutecfg.cmd, arpview.cmd, cpuview.cmd, memoryview.cmd, statswan.cmd, statsatm.cmd, scsrvcntr.cmd, scacccntr.cmd, logview.cmd, voicesipview.cmd, usbview.cmd, wlmacflt.cmd, wlwds.cmd, wlstationlist.cmd, HPNAShow.cmd, HPNAView.cmd, qoscls.cmd, qosqueue.cmd, portmap.cmd, scmacflt.cmd, scinflt.cmd, scoutflt.cmd, certlocal.cmd, or certca.cmd.

SQL injection vulnerability in the CallManager Interactive Voice Response (CMIVR) interface in Cisco Unified Communications Manager (UCM) allows remote attackers to execute arbitrary SQL commands via a crafted URL, aka Bug ID CSCum05318.

SQL injection vulnerability in the Java database interface in Cisco Unified Communications Manager (UCM) 10.0(1) and earlier allows remote attackers to execute arbitrary SQL commands via a crafted URL, aka Bug ID CSCum05313.

SQL injection vulnerability in the Enterprise Mobility Application (EMApp) interface in Cisco Unified Communications Manager (UCM) allows remote attackers to execute arbitrary SQL commands via a crafted URL, aka Bug ID CSCum05302.

A vulnerability in Cisco Meeting Server and Meeting App could allow an unauthenticated, remote attacker to execute arbitrary code on an affected system. This vulnerability affects the following products: Cisco Meeting Server releases prior to 2.0.1, Acano Server releases prior to 1.8.16 and prior to 1.9.3, Cisco Meeting App releases prior to 1.9.8, Acano Meeting Apps releases prior to 1.8.35. More Information: CSCva75942 CSCvb67878. Known Affected Releases: 1.81.92.0.

A vulnerability in the Session Description Protocol (SDP) parser of Cisco Meeting Server could allow an unauthenticated, remote attacker to execute arbitrary code on an affected system. This vulnerability affects the following products: Cisco Meeting Server releases prior to Release 2.0.3, Acano Server releases 1.9.x prior to Release 1.9.5, Acano Server releases 1.8.x prior to Release 1.8.17. More Information: CSCva76004. Known Affected Releases: 1.8.x 1.92.0.

A vulnerability in the API gateway of the Cisco Digital Network Architecture (DNA) Center could allow an unauthenticated, remote attacker to bypass authentication and access critical services. The vulnerability is due to a failure to normalize URLs prior to servicing requests. An attacker could exploit this vulnerability by submitting a crafted URL designed to exploit the issue. A successful exploit could allow the attacker to gain unauthenticated access to critical services, resulting in elevated privileges in DNA Center. This vulnerability affects Cisco DNA Center Software Releases prior to 1.1.2. Cisco Bug IDs: CSCvi09394.

Multiple vulnerabilities exist in the web-based management interface of Cisco Small Business RV Series Routers. A remote attacker could execute arbitrary commands or bypass authentication and upload files on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

Cisco Prime Network Analysis Module (NAM) before 6.1(1) patch.6.1-2-final and 6.2.x before 6.2(1) and Prime Virtual Network Analysis Module (vNAM) before 6.1(1) patch.6.1-2-final and 6.2.x before 6.2(1) allow remote attackers to execute arbitrary OS commands via a crafted HTTP request, aka Bug ID CSCuy21882.

Cisco VPN 3000 Concentrator 2.2.x, and 3.x before 3.5.3, adds an "HTTPS on Public Inbound (XML-Auto)(forward/in)" rule but sets the protocol to "ANY" when the XML filter configuration is enabled, which ultimately allows arbitrary traffic to pass through the concentrator.

A vulnerability in Cisco Virtual Wide Area Application Services (vWAAS) with Cisco Enterprise NFV Infrastructure Software (NFVIS)-bundled images for Cisco ENCS 5400-W Series and CSP 5000-W Series appliances could allow an unauthenticated, remote attacker to log into the NFVIS CLI of an affected device by using accounts that have a default, static password. The vulnerability exists because the affected software has user accounts with default, static passwords. An attacker with access to the NFVIS CLI of an affected device could exploit this vulnerability by logging into the CLI. A successful exploit could allow the attacker to access the NFVIS CLI with administrator privileges.

A vulnerability in Cisco Webex Meetings and Cisco Webex Meetings Server could allow an unauthenticated, remote attacker to gain unauthorized access to a vulnerable Webex site. The vulnerability is due to improper handling of authentication tokens by a vulnerable Webex site. An attacker could exploit this vulnerability by sending crafted requests to a vulnerable Cisco Webex Meetings or Cisco Webex Meetings Server site. If successful, the attacker could gain the privileges of another user within the affected Webex site.

A vulnerability in the Device Manager application of Cisco Data Center Network Manager (DCNM) could allow an unauthenticated, remote attacker to bypass authentication and execute arbitrary actions on an affected device. The vulnerability is due to a failure in the software to perform proper authentication. An attacker could exploit this vulnerability by browsing to one of the hosted URLs in Cisco DCNM. A successful exploit could allow the attacker to interact with and use certain functions within the Cisco DCNM.

A vulnerability in Cisco HyperFlex Software could allow an unauthenticated, remote attacker to generate valid, signed session tokens. The vulnerability is due to a static signing key that is present in all Cisco HyperFlex systems. An attacker could exploit this vulnerability by accessing the static signing key from one HyperFlex system and using it to generate valid, signed session tokens for another HyperFlex system. A successful exploit could allow the attacker to access the HyperFlex Web UI of a system for which they are not authorized.

Directory traversal vulnerability in the web-management interface in the server in Cisco Wide Area Application Services (WAAS) Mobile before 3.5.5 allows remote attackers to upload and execute arbitrary files via a crafted POST request, aka Bug ID CSCuh69773.

Cisco 675 routers running CBOS allow remote attackers to establish telnet sessions if an exec or superuser password has not been set.

SQL injection vulnerability in Cisco Unified Communications Manager (CUCM) 7.1(x) through 9.1(1a) allows remote attackers to execute arbitrary SQL commands via unspecified vectors, leading to discovery of encrypted credentials by leveraging metadata, aka Bug ID CSCuh01051.

A vulnerability in Cisco Digital Network Architecture (DNA) Center could allow an unauthenticated, remote attacker to bypass authentication and have direct unauthorized access to critical management functions. The vulnerability is due to an insecure default configuration of the affected system. An attacker could exploit this vulnerability by directly connecting to the exposed services. An exploit could allow the attacker to retrieve and modify critical system files.

Use-after-free vulnerability in decode_slice.cpp in Cisco OpenH264 1.2.0 and earlier allows remote attackers to execute arbitrary code via an encoded media file.

The UPnP IGD implementation on the Cisco Linksys WRT54GX with firmware 2.00.05, when UPnP is enabled, configures the SOAP server to listen on the WAN port, which allows remote attackers to administer the firewall via SOAP requests.

The UPnP IGD implementation in the Broadcom UPnP stack on the Cisco Linksys WRT54G with firmware before 4.30.5, WRT54GS v1 through v3 with firmware before 4.71.1, and WRT54GS v4 with firmware before 1.06.1 allows remote attackers to establish arbitrary port mappings by sending a UPnP AddPortMapping action in a SOAP request to the WAN interface, related to an "external forwarding" vulnerability.

A vulnerability in the use of JSON web tokens by the web-based service portal of Cisco Elastic Services Controller Software could allow an unauthenticated, remote attacker to gain administrative access to an affected system. The vulnerability is due to the presence of static default credentials for the web-based service portal of the affected software. An attacker could exploit this vulnerability by extracting the credentials from an image of the affected software and using those credentials to generate a valid administrative session token for the web-based service portal of any other installation of the affected software. A successful exploit could allow the attacker to gain administrative access to the web-based service portal of an affected system. This vulnerability affects Cisco Elastic Services Controller Software Release 3.0.0. Cisco Bug IDs: CSCvg30884.

A vulnerability in Cisco Prime Collaboration Provisioning (PCP) could allow an unauthenticated, remote attacker to access the Java Remote Method Invocation (RMI) system. The vulnerability is due to an open port in the Network Interface and Configuration Engine (NICE) service. An attacker could exploit this vulnerability by accessing the open RMI system on an affected PCP instance. An exploit could allow the attacker to perform malicious actions that affect PCP and the devices that are connected to it. This vulnerability affects Cisco Prime Collaboration Provisioning (PCP) Releases 11.6 and prior. Cisco Bug IDs: CSCvd61746.

The Enterprise Console in Cisco AppDynamics App iQ Platform before 4.4.3.10598 (HF4) allows SQL injection, aka the Security Advisory 2089 issue.

Multiple vulnerabilities in the web-based management interface of Cisco Finesse could allow an unauthenticated, remote attacker to conduct a server-side request forgery (SSRF) attack. Cisco Bug IDs: CSCvg71018.

A vulnerability in the authentication functionality of the web-based service portal of Cisco Elastic Services Controller Software could allow an unauthenticated, remote attacker to bypass authentication and execute arbitrary actions with administrator privileges on an affected system. The vulnerability is due to improper security restrictions that are imposed by the web-based service portal of the affected software. An attacker could exploit this vulnerability by submitting an empty password value to an affected portal when prompted to enter an administrative password for the portal. A successful exploit could allow the attacker to bypass authentication and gain administrator privileges for the web-based service portal of the affected software. This vulnerability affects Cisco Elastic Services Controller Software Release 3.0.0. Cisco Bug IDs: CSCvg29809.

A vulnerability in Cisco Unified Communications Domain Manager could allow an unauthenticated, remote attacker to bypass security protections, gain elevated privileges, and execute arbitrary code. The vulnerability is due to insecure key generation during application configuration. An attacker could exploit this vulnerability by using a known insecure key value to bypass security protections by sending arbitrary requests using the insecure key to a targeted application. An exploit could allow the attacker to execute arbitrary code. This vulnerability affects Cisco Unified Communications Domain Manager releases prior to 11.5(2). Cisco Bug IDs: CSCuv67964.

The Comcast firmware on Cisco DPC3939 (firmware version dpc3939-P20-18-v303r20421733-160420a-CMCST); Cisco DPC3939 (firmware version dpc3939-P20-18-v303r20421746-170221a-CMCST); Cisco DPC3939B (firmware version dpc3939b-v303r204217-150321a-CMCST); Cisco DPC3941T (firmware version DPC3941_2.5s3_PROD_sey); and Arris TG1682G (eMTA&DOCSIS version 10.0.132.SIP.PC20.CT, software version TG1682_2.2p7s2_PROD_sey) devices allows remote attackers to execute arbitrary code via a specific (but unstated) exposed service. NOTE: the scope of this CVE does NOT include the concept of "Unnecessary Services" in general; the scope is only a single service that is unnecessarily exposed, leading to remote code execution. The details of that service might be disclosed at a later date.

Multiple SQL injection vulnerabilities in Cisco Unified Operations Manager (CUOM) before 8.6 allow remote attackers to execute arbitrary SQL commands via (1) the CCMs parameter to iptm/PRTestCreation.do or (2) the ccm parameter to iptm/TelePresenceReportAction.do, aka Bug ID CSCtn61716.

Cisco TelePresence Recording Server devices with software 1.6.x do not require authentication for an XML-RPC interface, which allows remote attackers to perform unspecified actions via a session on TCP port 8080, aka Bug ID CSCtg35833.

A Spring MVC or Spring WebFlux application running on JDK 9+ may be vulnerable to remote code execution (RCE) via data binding. The specific exploit requires the application to run on Tomcat as a WAR deployment. If the application is deployed as a Spring Boot executable jar, i.e. the default, it is not vulnerable to the exploit. However, the nature of the vulnerability is more general, and there may be other ways to exploit it.

A vulnerability in the Cisco Umbrella Secure Web Gateway service could allow an unauthenticated, remote attacker to bypass the file inspection feature. This vulnerability is due to insufficient restrictions in the file inspection feature. An attacker could exploit this vulnerability by downloading a crafted payload through specific methods. A successful exploit could allow the attacker to bypass file inspection protections and download a malicious payload.

Multiple vulnerabilities in Cisco Small Business RV160, RV260, RV340, and RV345 Series Routers could allow an attacker to do any of the following: Execute arbitrary code Elevate privileges Execute arbitrary commands Bypass authentication and authorization protections Fetch and run unsigned software Cause denial of service (DoS) For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in Cisco Small Business RV160, RV260, RV340, and RV345 Series Routers could allow an attacker to do any of the following: Execute arbitrary code Elevate privileges Execute arbitrary commands Bypass authentication and authorization protections Fetch and run unsigned software Cause denial of service (DoS) For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the implementation of the Locator/ID Separation Protocol (LISP) in Cisco IOS XE 3.2 through 16.5 could allow an unauthenticated, remote attacker using an x tunnel router to bypass authentication checks performed when registering an Endpoint Identifier (EID) to a Routing Locator (RLOC) in the map server/map resolver (MS/MR). The vulnerability is due to a logic error introduced via a code regression for the affected software. An attacker could exploit this vulnerability by sending specific valid map-registration requests, which will be accepted by the MS/MR even if the authentication keys do not match, to the affected software. A successful exploit could allow the attacker to inject invalid mappings of EIDs to RLOCs in the MS/MR of the affected software. This vulnerability affects Cisco devices that are configured with LISP acting as an IPv4 or IPv6 map server. This vulnerability affects Cisco IOS XE Software release trains 3.9E and Everest 16.4. Cisco Bug IDs: CSCvc18008.

Multiple vulnerabilities in the web-based management interface of the Cisco Catalyst Passive Optical Network (PON) Series Switches Optical Network Terminal (ONT) could allow an unauthenticated, remote attacker to perform the following actions: Log in with a default credential if the Telnet protocol is enabled Perform command injection Modify the configuration For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the web-based management interface of the Cisco Catalyst Passive Optical Network (PON) Series Switches Optical Network Terminal (ONT) could allow an unauthenticated, remote attacker to perform the following actions: Log in with a default credential if the Telnet protocol is enabled Perform command injection Modify the configuration For more information about these vulnerabilities, see the Details section of this advisory.

Cisco Unified Computing System (UCS) 1.x before 1.4(4) and 2.x before 2.0(2m) allows remote attackers to bypass KVM authentication via a crafted authentication request to a Cisco Integrated Management Controller (IMC), aka Bug ID CSCts53746.

The Cisco Prime Network Control System (NCS) appliance with software before 1.1.1.24 has a default password for the database user account, which makes it easier for remote attackers to change the configuration or cause a denial of service (service disruption) via unspecified vectors, aka Bug ID CSCtz30468.

SQL injection vulnerability in Cisco Network Admission Control (NAC) Manager before 4.8.3.1 and 4.9.x before 4.9.2 allows remote attackers to execute arbitrary SQL commands via unspecified vectors, aka Bug ID CSCub23095.

Cisco Secure ACS 3.x before 3.3(4) Build 12 patch 7, 4.0.x, 4.1.x before 4.1(4) Build 13 Patch 11, and 4.2.x before 4.2(0) Build 124 Patch 4 does not properly handle an EAP Response packet in which the value of the length field exceeds the actual packet length, which allows remote authenticated users to cause a denial of service (CSRadius and CSAuth service crash) or possibly execute arbitrary code via a crafted RADIUS (1) EAP-Response/Identity, (2) EAP-Response/MD5, or (3) EAP-Response/TLS Message Attribute packet.