The web-based GUI in Cisco Firepower Management Center 4.x and 5.x before 5.3.0.3, 5.3.1.x before 5.3.1.2, and 5.4.x before 5.4.0.1 and Cisco Adaptive Security Appliance (ASA) Software on 5500-X devices with FirePOWER Services 4.x and 5.x before 5.3.0.3, 5.3.1.x before 5.3.1.2, and 5.4.x before 5.4.0.1 allows remote authenticated users to increase user-account privileges via crafted HTTP requests, aka Bug ID CSCur25483.
Cisco RV180 and RV180W devices allow remote authenticated users to execute arbitrary commands as root via a crafted HTTP request, aka Bug ID CSCuz48592.
The administrative web interface in Cisco Prime Infrastructure (PI) before 3.1.1 allows remote authenticated users to execute arbitrary commands via crafted field values, aka Bug ID CSCuy96280.
Cisco Wireless LAN Controller (WLC) software, possibly 4.2 through 6.0, allows remote authenticated users to bypass intended access restrictions and modify the configuration, and possibly obtain administrative privileges, via unspecified vectors, a different vulnerability than CVE-2010-2843 and CVE-2010-3033.
Cisco Wireless LAN Controller (WLC) software, possibly 4.2 through 6.0, allows remote authenticated users to bypass intended access restrictions and modify the configuration, and possibly obtain administrative privileges, via unspecified vectors, a different vulnerability than CVE-2010-2842 and CVE-2010-2843.
The web management interface on the Cisco RVS4000 Gigabit Security Router with software 1.x before 1.3.3.4 and 2.x before 2.0.2.7, and the WRVS4400N Gigabit Security Router with software before 2.0.2.1, allows remote authenticated users to execute arbitrary commands via the (1) ping test parameter or (2) traceroute test parameter, aka Bug ID CSCtn23871.
Cisco Video Communications Server (VCS) before X7.0.3 contains a command injection vulnerability which allows remote, authenticated attackers to execute arbitrary commands.
The CGI implementation on Cisco TelePresence endpoint devices with software 1.2.x through 1.5.x allows remote authenticated users to execute arbitrary commands via a malformed request, related to "command injection vulnerabilities," aka Bug ID CSCtb31659.
Unspecified vulnerability in Cisco Mediator Framework 1.5.1 before 1.5.1.build.14-eng, 2.2 before 2.2.1.dev.1, and 3.0 before 3.0.9.release.1 on the Cisco Network Building Mediator NBM-2400 and NBM-4800 and the Richards-Zeta Mediator 2500 allows remote authenticated users to read or modify the device configuration, and gain privileges or cause a denial of service (device reload), via a (1) XML RPC or (2) XML RPC over HTTPS request, aka Bug ID CSCtb83618.
The web-based GUI in Cisco Firepower Management Center 4.x and 5.x before 5.3.1.2 and 5.4.x before 5.4.0.1 and Cisco Adaptive Security Appliance (ASA) Software on 5500-X devices with FirePOWER Services 4.x and 5.x before 5.3.1.2 and 5.4.x before 5.4.0.1 allows remote authenticated users to execute arbitrary commands as root via crafted HTTP requests, aka Bug ID CSCur25513.
The Device Manager GUI in Cisco Application Control Engine (ACE) 4710 A5 before A5(3.1) allows remote authenticated users to bypass intended RBAC restrictions and execute arbitrary CLI commands with admin privileges via an unspecified parameter in a POST request, aka Bug ID CSCul84801.
The web framework in Cisco Unified Computing System (UCS) Performance Manager 2.0.0 and earlier allows remote authenticated users to execute arbitrary commands via crafted parameters in a GET request, aka Bug ID CSCuy07827.
Cisco Application Policy Infrastructure Controller (APIC) devices with software before 1.0(3h) and 1.1 before 1.1(1j) and Nexus 9000 ACI Mode switches with software before 11.0(3h) and 11.1 before 11.1(1j) allow remote authenticated users to bypass intended RBAC restrictions via crafted REST requests, aka Bug ID CSCut12998.
Cisco Wireless LAN Controller (WLC) software, possibly 4.2 through 6.0, allows remote authenticated users to bypass intended access restrictions and modify the configuration, and possibly obtain administrative privileges, via unspecified vectors, a different vulnerability than CVE-2010-2842 and CVE-2010-3033.
SQL injection vulnerability in Cisco Wireless Control System (WCS) 6.0.x before 6.0.196.0 allows remote authenticated users to execute arbitrary SQL commands via vectors related to the ORDER BY clause of the Client List screens, aka Bug ID CSCtf37019.
Unspecified vulnerability in the tech support diagnostic shell in Cisco Application Extension Platform (AXP) 1.1 and 1.1.5 allows local users to obtain sensitive configuration information and gain administrator privileges via unspecified API calls.
Unspecified vulnerability in Cisco Mediator Framework 2.2 before 2.2.1.dev.1 and 3.0 before 3.0.9.release.1 on the Cisco Network Building Mediator NBM-2400 and NBM-4800 and the Richards-Zeta Mediator 2500 allows remote authenticated users to read or modify the device configuration, and gain privileges, via a (1) HTTP or (2) HTTPS request, aka Bug ID CSCtb83607.
The Cisco RVS4000 4-port Gigabit Security Router before 1.3.2.0, PVC2300 Business Internet Video Camera before 1.1.2.6, WVC200 Wireless-G PTZ Internet Video Camera before 1.1.1.15, WVC210 Wireless-G PTZ Internet Video Camera before 1.1.1.15, and WVC2300 Wireless-G Business Internet Video Camera before 1.1.2.6 do not properly restrict read access to passwords, which allows context-dependent attackers to obtain sensitive information, related to (1) access by remote authenticated users to a PVC2300 or WVC2300 via a crafted URL, (2) leveraging setup privileges on a WVC200 or WVC210, and (3) leveraging administrative privileges on an RVS4000, aka Bug ID CSCte64726.
Unspecified vulnerability in the Cisco Wireless LAN Controller (WLC), Cisco Catalyst 6500 Wireless Services Module (WiSM), and Cisco Catalyst 3750 Integrated Wireless LAN Controller with software 4.2.173.0 allows remote authenticated users to gain privileges via unknown vectors, as demonstrated by escalation from the (1) Lobby Admin and (2) Local Management User privilege levels.
Directory traversal vulnerability in the Administration interface in Cisco Customer Response Solutions (CRS) before 7.0(1) SR2 in Cisco Unified Contact Center Express (aka CCX) server allows remote authenticated users to read, modify, or delete arbitrary files via unspecified vectors.
Directory traversal vulnerability in Cisco Application Networking Manager (ANM) before 2.0 and Application Control Engine (ACE) Device Manager before A3(2.1) allows remote authenticated users to read or modify arbitrary files via unspecified vectors, related to "invalid directory permissions."
Unspecified vulnerability in Cisco ACE Application Control Engine Module for Catalyst 6500 Switches and 7600 Routers before A2(1.2) and Cisco ACE 4710 Application Control Engine Appliance before A1(8a) allows remote authenticated users to execute arbitrary operating-system commands through a command line interface (CLI).
Cisco RV110W, RV130W, and RV215W devices have an incorrect RBAC configuration for the default account, which allows remote authenticated users to obtain root access via a login session with that account, aka Bug IDs CSCuv90139, CSCux58175, and CSCux73557.
The policy implementation in Cisco FireSIGHT Management Center 5.3.1.7, 5.4.0.4, and 6.0.0 for VMware allows remote authenticated administrators to bypass intended policy restrictions and execute Linux commands as root via unspecified vectors, aka Bug ID CSCuw12839.
A vulnerability in the image verification function of Cisco Expressway Series and Cisco TelePresence Video Communication Server (VCS) could allow an authenticated, remote attacker to execute code with internal user privileges on the underlying operating system. The vulnerability is due to insufficient validation of the content of upgrade packages. An attacker could exploit this vulnerability by uploading a malicious archive to the Upgrade page of the administrative web interface. A successful exploit could allow the attacker to execute code with user-level privileges (the _nobody account) on the underlying operating system.
Cisco Application Policy Infrastructure Controller (APIC) devices with software before 1.0(3o) and 1.1 before 1.1(1j) and Nexus 9000 ACI devices with software before 11.0(4o) and 11.1 before 11.1(1j) do not properly restrict access to the APIC filesystem, which allows remote authenticated users to obtain root privileges via unspecified use of the APIC cluster-management configuration feature, aka Bug IDs CSCuu72094 and CSCuv11991.
Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV320 and RV325 Series Routers and Cisco Small Business RV016, RV042, and RV082 Routers could allow an authenticated, remote attacker with administrative privileges to execute arbitrary commands on an affected device. The vulnerabilities exist because the web-based management interface does not properly validate user-supplied input to scripts. An attacker with administrative privileges that are sufficient to log in to the web-based management interface could exploit each vulnerability by sending malicious requests to an affected device. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the underlying operating system.
A vulnerability in the web-based user interface (web UI) of Cisco IOS XE Software could allow an authenticated, remote attacker with read-only privileges to inject IOS commands to an affected device. The injected commands should require a higher privilege level in order to be executed. The vulnerability is due to insufficient input validation of specific HTTP requests. An attacker could exploit this vulnerability by sending crafted HTTP requests to a specific web UI endpoint on an affected device. A successful exploit could allow the attacker to inject IOS commands to the affected device, which could allow the attacker to alter the configuration of the device or cause a denial of service (DoS) condition.
The web framework in Cisco Prime Collaboration Provisioning before 11.0 allows remote authenticated users to bypass intended access restrictions and create administrative accounts via a crafted URL, aka Bug ID CSCut64111.
A vulnerability in the web-based management interface of Cisco Intersight Virtual Appliance could allow an authenticated, remote attacker to perform a command injection attack on an affected device. This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by using the web-based management interface to execute a command using crafted input. A successful exploit could allow the attacker to execute arbitrary commands using root-level privileges on an affected device.
A vulnerability in the Control and Provisioning of Wireless Access Points (CAPWAP) protocol processing of Cisco IOS XE Software for Cisco Catalyst 9000 Family Wireless Controllers could allow an unauthenticated, remote attacker to execute arbitrary code with administrative privileges or cause a denial of service (DoS) condition on an affected device. The vulnerability is due to a logic error that occurs during the validation of CAPWAP packets. An attacker could exploit this vulnerability by sending a crafted CAPWAP packet to an affected device. A successful exploit could allow the attacker to execute arbitrary code with administrative privileges or cause the affected device to crash and reload, resulting in a DoS condition.
A vulnerability in the web-based management interface of Cisco Expressway Series and Cisco TelePresence Video Communication Server (VCS) could allow an authenticated, remote attacker to execute arbitrary code on the underlying operating system as the root user. This vulnerability is due to incorrect handling of certain crafted software images that are uploaded to the affected device. An attacker could exploit this vulnerability by authenticating to the system as an administrative user and then uploading specific crafted software images to the affected device. A successful exploit could allow the attacker to execute arbitrary code on the underlying operating system as the root user.
Multiple vulnerabilities in the Cisco ATA 190 Series Analog Telephone Adapter Software could allow an attacker to perform a command injection attack resulting in remote code execution or cause a denial of service (DoS) condition on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.
The IP Phone Personal Address Book (PAB) Synchronizer feature in Cisco Unified Communications Manager (aka CUCM, formerly CallManager) 4.1, 4.2 before 4.2(3)SR4b, 4.3 before 4.3(2)SR1b, 5.x before 5.1(3e), 6.x before 6.1(3), and 7.0 before 7.0(2) sends privileged directory-service account credentials to the client in cleartext, which allows remote attackers to modify the CUCM configuration and perform other privileged actions by intercepting these credentials, and then using them in requests unrelated to the intended synchronization task, as demonstrated by (1) DC Directory account credentials in CUCM 4.x and (2) TabSyncSysUser account credentials in CUCM 5.x through 7.x.
Cisco NX-OS 4.0 through 7.3 on Multilayer Director and Nexus 1000V, 2000, 3000, 3500, 4000, 5000, 5500, 5600, 6000, 7000, 7700, and 9000 devices allows remote authenticated users to bypass intended AAA restrictions and obtain privileged CLI access via crafted parameters in an SSH connection negotiation, aka Bug IDs CSCum35502, CSCuw78669, CSCuw79754, and CSCux88492.
The administrative web interface in Cisco WebEx Meetings Server 1.0 through 1.5 allows remote authenticated users to execute arbitrary OS commands with root privileges via unspecified fields, aka Bug ID CSCuj40460.
Cisco TelePresence TC Software 4.x through 6.x before 6.2.0 and TE Software 4.x and 6.0 allow remote authenticated users to execute arbitrary commands by using the commands as arguments to internal system scripts, aka Bug ID CSCue60211.
The network-diagnostics administration interface in the Cisco RV router firmware on RV220W devices, before 1.0.5.9 on RV120W devices, and before 1.0.4.14 on RV180 and RV180W devices allows remote authenticated users to execute arbitrary commands via a crafted HTTP request, aka Bug ID CSCuh87126.
The Administration GUI in the web framework in Cisco Unified Communications Domain Manager (CDM) in Unified CDM Application Software before 8.1.4 does not properly implement access control, which allows remote authenticated users to modify administrative credentials via a crafted URL, aka Bug ID CSCun49862.
The server in Cisco Unity Connection 9.1(1) and 9.1(2) allows remote authenticated users to obtain privileged access by conducting an "HTTP Intercept" attack and leveraging the ability to read files within the context of the web-server user account, aka Bug ID CSCup41014.
Cisco TelePresence TC Software 4.x and 5.x before 5.1.7 and 6.x before 6.0.1 and TE Software 4.x and 6.0 allow remote authenticated users to execute arbitrary commands by using the commands as arguments to tshell (aka tcsh) scripts, aka Bug ID CSCue60202.
A vulnerability in the error reporting feature of the Cisco SD-WAN Solution could allow an authenticated, remote attacker to gain elevated privileges on an affected device. The vulnerability is due to a failure to properly validate certain parameters included within the error reporting application configuration. An attacker could exploit this vulnerability by sending a crafted command to the error reporting feature. A successful exploit could allow the attacker to gain root-level privileges and take full control of the device.
A vulnerability in the web interface of Cisco Data Center Network Manager could allow an authenticated application administrator to execute commands on the underlying operating system with root-level privileges. The vulnerability is due to incomplete input validation of user input within an HTTP request. An attacker could exploit this vulnerability by authenticating to the application and then sending a crafted HTTP request to the targeted application. A successful exploit could allow the authenticated attacker to issue commands on the underlying operating system as the root user.
The RMI interface in Cisco Secure Access Control System (ACS) 5.x before 5.5 does not properly enforce authorization requirements, which allows remote authenticated users to obtain superadmin access via a request to this interface, aka Bug ID CSCud75180.
A vulnerability in the web-based management interface of Cisco Integrated Management Controller (IMC) Software could allow an authenticated, remote attacker to inject and execute arbitrary commands with root privileges on an affected device. The vulnerability is due to insufficient validation of command input by the affected software. An attacker could exploit this vulnerability by sending crafted commands to the web-based management interface of the affected software. A successful exploit could allow the attacker to inject and execute arbitrary, system-level commands with root privileges on an affected device.
A vulnerability in the CLI parser of Cisco Network Services Orchestrator (NSO) could allow an authenticated, remote attacker to execute arbitrary shell commands with the privileges of the root user. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by injecting malicious arguments into vulnerable commands. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the affected system. This vulnerability affects the following releases of Cisco Network Services Orchestrator (NSO): 4.1 through 4.1.6.0, 4.2 through 4.2.4.0, 4.3 through 4.3.3.0, 4.4 through 4.4.2.0. Cisco Bug IDs: CSCvf99982.
A vulnerability in the process of uploading new application images to Cisco FXOS on the Cisco Firepower 4100 Series Next-Generation Firewall (NGFW) and Firepower 9300 Security Appliance could allow an authenticated, remote attacker using path traversal techniques to create or overwrite arbitrary files on an affected device. The vulnerability is due to insufficient validation during the application image upload process. An attacker could exploit this vulnerability by creating an application image containing malicious code and installing the image on the affected device using the CLI or web-based user interface (web UI). These actions occur prior to signature verification and could allow the attacker to create and execute arbitrary code with root privileges. Note: A missing or invalid signature in the application image will cause the upload process to fail, but does not prevent the exploit. Cisco Bug IDs: CSCvc21901.
A vulnerability in role-based access control (RBAC) for Cisco NX-OS Software could allow an authenticated, remote attacker to execute CLI commands that should be restricted for a nonadministrative user. The attacker would have to possess valid user credentials for the device. The vulnerability is due to incorrect RBAC privilege assignment for certain CLI commands. An attacker could exploit this vulnerability by authenticating to a device as a nonadministrative user and executing specific commands from the CLI. An exploit could allow the attacker to run commands that should be restricted to administrative users. These commands could modify the configuration or boot image on the device. This vulnerability affects MDS 9000 Series Multilayer Switches, Nexus 2000 Series Switches, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 3600 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules. Cisco Bug IDs: CSCvd77904.
Cisco Prime Infrastructure 1.2 and 1.3 before 1.3.0.20-2, 1.4 before 1.4.0.45-2, and 2.0 before 2.0.0.0.294-2 allows remote authenticated users to execute arbitrary commands with root privileges via an unspecified URL, aka Bug ID CSCum71308.
A vulnerability in the web management GUI of the Cisco D9800 Network Transport Receiver could allow an authenticated, remote attacker to perform a command injection attack. The vulnerability is due to insufficient input validation of GUI command arguments. An attacker could exploit this vulnerability by injecting crafted arguments into a vulnerable GUI command. An exploit could allow the attacker to execute commands on the underlying BusyBox operating system. These commands are run at the privilege level of the authenticated user. The attacker needs valid device credentials for this attack. Cisco Bug IDs: CSCvg74691.