Cisco Secure Access Control System (ACS) does not properly implement an incoming-packet firewall rule, which allows remote attackers to cause a denial of service (process crash) via a flood of crafted packets, aka Bug ID CSCui51521.

Apache Traffic Server before 6.2.1 generates a coredump when there is a mismatch between content length and chunked encoding.

The TCP/IP networking module in Unisys ClearPath MCP systems with TCP-IP-SW 57.1 before 57.152, 58.1 before 58.142, or 59.1 before 59.172, when running a TLS 1.2 service, allows remote attackers to cause a denial of service (network connectivity disruption) via a client hello with a signature_algorithms extension above those defined in RFC 5246, which triggers a full memory dump.

In Schneider Electric ClearSCADA 2014 R1 (build 75.5210) and prior, 2014 R1.1 (build 75.5387) and prior, 2015 R1 (build 76.5648) and prior, and 2015 R2 (build 77.5882) and prior, an attacker with network access to the ClearSCADA server can send specially crafted sequences of commands and data packets to the ClearSCADA server that can cause the ClearSCADA server process and ClearSCADA communications driver processes to terminate. A CVSS v3 base score of 7.5 has been assigned; the CVSS vector string is (AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H).

On Juniper Networks Junos OS and Junos OS Evolved devices, the receipt of a specific BGP UPDATE packet causes an internal counter to be incremented incorrectly, which over time can lead to the routing protocols process (RPD) crash and restart. This issue affects both IBGP and EBGP multihop deployment in IPv4 or IPv6 network. This issue affects: Juniper Networks Junos OS: 17.2X75 versions prior to 17.2X75-D105.19; 17.3 versions prior to 17.3R3-S8; 17.4 versions prior to 17.4R2-S10, 17.4R3-S2; 18.1 versions prior to 18.1R3-S10; 18.2 versions prior to 18.2R2-S7, 18.2R3-S4; 18.2X75 versions prior to 18.2X75-D13, 18.2X75-D411.1, 18.2X75-D420.18, 18.2X75-D52.3, 18.2X75-D60; 18.3 versions prior to 18.3R2-S4, 18.3R3-S2; 18.4 versions prior to 18.4R1-S7, 18.4R2-S4, 18.4R3-S2; 19.1 versions prior to 19.1R1-S5, 19.1R2-S1, 19.1R3; 19.2 versions prior to 19.2R1-S5, 19.2R2; 19.3 versions prior to 19.3R2-S2, 19.3R3; 19.4 versions prior to 19.4R1-S2, 19.4R2. Juniper Networks Junos OS Evolved: any releases prior to 20.1R2-EVO. This issue does not affect Juniper Networks Junos OS releases prior to 17.3R1.

An issue was discovered in picoTCP 1.7.0. The routine for processing the next header field (and deducing whether the IPv6 extension headers are valid) doesn't check whether the header extension length field would overflow. Therefore, if it wraps around to zero, iterating through the extension headers will not increment the current data pointer. This leads to an infinite loop and Denial-of-Service in pico_ipv6_check_headers_sequence() in pico_ipv6.c.

EasyCom SQL iPlug allows remote attackers to cause a denial of service via the D$EVAL parameter to the default URI.

Odata Server in SAP Adaptive Server Enterprise (ASE) 16 allows remote attackers to cause a denial of service (process crash) via a series of crafted requests, aka SAP Security Note 2330422.

An improper use of a validation framework when processing incoming genuine BGP packets within Juniper Networks RPD (routing protocols process) daemon allows an attacker to crash RPD thereby causing a Denial of Service (DoS) condition. This framework requires these packets to be passed. By continuously sending any of these types of formatted genuine packets, an attacker can repeatedly crash the RPD process causing a sustained Denial of Service. Authentication to the BGP peer is not required. This issue can be initiated or propagated through eBGP and iBGP and can impact devices in either modes of use as long as the devices are configured to support the compromised framework and a BGP path is activated or active. This issue affects: Juniper Networks Junos OS 16.1 versions 16.1R7-S6 and later versions prior to 16.1R7-S8; 17.3 versions 17.3R2-S5, 17.3R3-S6 and later versions prior to 17.3R3-S8; 17.4 versions 17.4R2-S7, 17.4R3 and later versions prior to 17.4R2-S11, 17.4R3-S2; 18.1 versions 18.1R3-S7 and later versions prior to 18.1R3-S10; 18.2 versions 18.2R2-S6, 18.2R3-S2 and later versions prior to 18.2R2-S7, 18.2R3-S5; 18.2X75 versions 18.2X75-D12, 18.2X75-D32, 18.2X75-D33, 18.2X75-D51, 18.2X75-D60, 18.2X75-D411, 18.2X75-D420 and later versions prior to 18.2X75-D32, 18.2X75-D33, 18.2X75-D420, 18.2X75-D52, 18.2X75-D60, 18.2X75-D65, 18.2X75-D70;(*1) 18.3 versions 18.3R1-S6, 18.3R2-S3, 18.3R3 and later versions prior to 18.3R2-S4, 18.3R3-S2; 18.4 versions 18.4R1-S5, 18.4R2-S4, 18.4R3 and later versions prior to 18.4R1-S7, 18.4R2-S5, 18.4R3-S3(*2); 19.1 versions 19.1R1-S3, 19.1R2 and later versions prior to 19.1R1-S5, 19.1R2-S2, 19.1R3-S2; 19.2 versions 19.2R1-S2, 19.2R2 and later versions prior to 19.2R1-S5, 19.2R2, 19.2R3; 19.3 versions prior to 19.3R2-S3, 19.3R3; 19.4 versions prior to 19.4R1-S2, 19.4R2, 19.4R3; 20.1 versions prior to 20.1R1-S1, 20.1R2. This issue does not affect Junos OS prior to 16.1R1. This issue affects IPv4 and IPv6 traffic.

On Juniper Networks Junos OS devices configured with DHCPv6 relay enabled, receipt of a specific DHCPv6 packet might crash the jdhcpd daemon. The jdhcpd daemon automatically restarts without intervention, but continuous receipt of specific crafted DHCP messages will repeatedly crash jdhcpd, leading to an extended Denial of Service (DoS) condition. Only DHCPv6 packet can trigger this issue. DHCPv4 packet cannot trigger this issue. This issue affects Juniper Networks Junos OS: 17.3 versions prior to 17.3R3-S9; 17.4 versions prior to 17.4R2-S11, 17.4R3-S2, 17.4R3-S3; 18.1 versions prior to 18.1R3-S11; 18.2 versions prior to 18.2R3-S5; 18.3 versions prior to 18.3R2-S4, 18.3R3-S3; 18.4 versions prior to 18.4R2-S5, 18.4R3-S4; 19.1 versions prior to 19.1R2-S2, 19.1R3-S2; 19.2 versions prior to 19.2R1-S5, 19.2R2-S1, 19.2R3; 19.3 versions prior to 19.3R2-S4, 19.3R2-S4, 19.3R3; 19.4 versions prior to 19.4R1-S3, 19.4R2-S1, 19.4R3; 20.1 versions prior to 20.1R1-S3, 20.1R2.

A vulnerability in the ICMP ingress packet processing of Cisco TelePresence Collaboration Endpoint (CE) Software could allow an unauthenticated, remote attacker to cause the TelePresence endpoint to reload unexpectedly, resulting in a denial of service (DoS) condition. The vulnerability is due to incomplete input validation for the size of a received ICMP packet. An attacker could exploit this vulnerability by sending a crafted ICMP packet to the local IP address of the targeted endpoint. A successful exploit could allow the attacker to cause a DoS of the TelePresence endpoint, during which time calls could be dropped. This vulnerability would affect either IPv4 or IPv6 ICMP traffic. This vulnerability affects the following Cisco TelePresence products when running software release CE8.1.1, CE8.2.0, CE8.2.1, CE8.2.2, CE 8.3.0, or CE8.3.1: Spark Room OS, TelePresence DX Series, TelePresence MX Series, TelePresence SX Quick Set Series, TelePresence SX Series. Cisco Bug IDs: CSCvb95396.

Cisco Common Services, as used in Cisco Prime LAN Management Solution (LMS), Cisco Security Manager, Cisco Unified Service Monitor, and Cisco Unified Operations Manager, does not properly interact with the ActiveMQ component, which allows remote attackers to cause a denial of service (memory consumption) via simultaneous TCP sessions, aka Bug IDs CSCuh54766, CSCuh01267, CSCuh95976, and CSCuh95969.

Huawei NIP6800 versions V500R001C30, V500R001C60SPC500, and V500R005C00; and Secospace USG6600 and USG9500 versions V500R001C30SPC200, V500R001C30SPC600, V500R001C60SPC500, and V500R005C00 have an input validation vulnerability where the IPSec module does not validate a field in a specific message. Attackers can send specific message to cause out-of-bound read, compromising normal service.

Multiple array index errors in epan/dissectors/packet-gsm_a_common.c in the GSM A Common dissector in Wireshark 1.8.x before 1.8.9 and 1.10.x before 1.10.1 allow remote attackers to cause a denial of service (application crash) via a crafted packet.

During a renegotiation handshake if the Encrypt-Then-Mac extension is negotiated where it was not in the original handshake (or vice-versa) then this can cause OpenSSL 1.1.0 before 1.1.0e to crash (dependent on ciphersuite). Both clients and servers are affected.

A vulnerability in an internal API of the Cisco Meeting Server (CMS) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on the affected appliance. More Information: CSCvc89678. Known Affected Releases: 2.1. Known Fixed Releases: 2.1.2.

epan/dissectors/packet-dcom-sysact.c in the DCOM ISystemActivator dissector in Wireshark 1.10.x before 1.10.1 does not properly validate certain index values, which allows remote attackers to cause a denial of service (assertion failure and application exit) via a crafted packet.

A vulnerability in the Stream Control Transmission Protocol (SCTP) decoder of the Cisco NetFlow Generation Appliance (NGA) with software before 1.1(1a) could allow an unauthenticated, remote attacker to cause the device to hang or unexpectedly reload, causing a denial of service (DoS) condition. The vulnerability is due to incomplete validation of SCTP packets being monitored on the NGA data ports. An attacker could exploit this vulnerability by sending malformed SCTP packets on a network that is monitored by an NGA data port. SCTP packets addressed to the IP address of the NGA itself will not trigger this vulnerability. An exploit could allow the attacker to cause the appliance to become unresponsive or reload, causing a DoS condition. User interaction could be needed to recover the device using the reboot command from the CLI. The following Cisco NetFlow Generation Appliances are vulnerable: NGA 3140, NGA 3240, NGA 3340. Cisco Bug IDs: CSCvc83320.

epan/dissectors/packet-dcom-sysact.c in the DCOM ISystemActivator dissector in Wireshark 1.10.x before 1.10.1 does not properly determine whether there is remaining packet data to process, which allows remote attackers to cause a denial of service (application crash) via a crafted packet.

The Canon MG3100, MG5300, MG6100, MP495, MX340, MX870, MX890, MX920, and MX922 printers allow remote attackers to cause a denial of service (device hang) via a crafted LAN_TXT24 parameter to English/pages_MacUS/cgi_lan.cgi followed by a direct request to English/pages_MacUS/lan_set_content.html. NOTE: the vendor has apparently responded by stating "Canon believes that its printers will not have to deal with unauthorized access to the network from an external location as long as the printers are used in a secured environment."

A denial of service vulnerability in rpd daemon of Juniper Networks Junos OS allows a malformed MPLS ping packet to crash the rpd daemon if MPLS OAM is configured. Repeated crashes of the rpd daemon can result in an extended denial of service condition for the device. The affected releases are Junos OS 12.3X48 prior to 12.3X48-D50, 12.3X48-D55; 13.3 prior to 13.3R10; 14.1 prior to 14.1R4-S13, 14.1R8-S3, 14.1R9; 14.1X53 prior to 14.1X53-D42, 14.1X53-D50; 14.2 prior to 14.2R4-S8, 14.2R7-S6, 14.2R8; 15.1 prior to 15.1F2-S14, 15.1F5-S7, 15.1F6-S4, 15.1F7, 15.1R4-S7, 15.1R5-S1, 15.1R6; 15.1X49 prior to 15.1X49-D100; 15.1X53 prior to 15.1X53-D105, 15.1X53-D47, 15.1X53-D62, 15.1X53-D70; 16.1 prior to 16.1R3-S3, 16.1R4. No other Juniper Networks products or platforms are affected by this issue.

The web services APIs in Eucalyptus 2.0 through 3.4.1 allow remote attackers to cause a denial of service via vectors related to the "network connection clean up code" and (1) Cloud Controller (CLC), (2) Walrus, (3) Storage Controller (SC), and (4) VMware Broker (VB).

The HTTP server in Node.js 0.10.x before 0.10.21 and 0.8.x before 0.8.26 allows remote attackers to cause a denial of service (memory and CPU consumption) by sending a large number of pipelined requests without reading the response.

ns-slapd in 389 Directory Server before 1.3.0.8 allows remote attackers to cause a denial of service (server crash) via a crafted Distinguished Name (DN) in a MOD operation request.

An issue was discovered in Enigmail before 1.9.9. Regular expressions are exploitable for Denial of Service, because of attempts to match arbitrarily long strings, aka TBE-01-003.

The mk_request_header_process function in mk_request.c in Monkey 1.1.1 allows remote attackers to cause a denial of service (thread crash and service outage) via a '\0' character in an HTTP request.

The Fast Communications Manager (FCM) in IBM DB2 Enterprise Server Edition and Advanced Enterprise Server Edition 10.1 before FP3 and 10.5, when a multi-node configuration is used, allows remote attackers to cause a denial of service via vectors involving arbitrary data.

index.js in brace-expansion before 1.1.7 is vulnerable to Regular Expression Denial of Service (ReDoS) attacks, as demonstrated by an expand argument containing many comma characters.

PostGIS 2.x before 2.3.3, as used with PostgreSQL, allows remote attackers to cause a denial of service via crafted ST_AsX3D function input, as demonstrated by an abnormal server termination for "SELECT ST_AsX3D('LINESTRING EMPTY');" because empty geometries are mishandled.

An Improper Input Validation issue was discovered in Advantech WebAccess versions prior to 8.3. WebAccess allows some inputs that may cause the program to crash.

The Meeting Server in IBM Sametime 8.x through 8.5.2.1 and 9.x through 9.0.0.1 allows remote attackers to cause a denial of service (room unusability) by generating a large number of fictitious users to enter a meeting room.

Huawei DP300 V500R002C00, RP200 V500R002C00, V600R006C00, TE30 V100R001C10, V500R002C00, V600R006C00, TE40 V500R002C00, V600R006C00, TE50 V500R002C00, V600R006C00, TE60 V100R001C01, V100R001C10, V500R002C00, V600R006C00 have an out-of-bound read vulnerability. A remote attacker send specially crafted Session Initiation Protocol (SIP) messages to the affected products. Due to insufficient input validation, successful exploit will cause some services abnormal.

The aspath_put function in bgpd/bgp_aspath.c in Quagga before 1.2.2 allows remote attackers to cause a denial of service (session drop) via BGP UPDATE messages, because AS_PATH size calculation for long paths counts certain bytes twice and consequently constructs an invalid message.

MikroTik RouterBOARD v6.39.2 and v6.40.5 allows an unauthenticated remote attacker to cause a denial of service by connecting to TCP port 53 and sending data that begins with many '\0' characters, possibly related to DNS.

IKEv2 in Huawei IPS Module V500R001C00, V500R001C00SPC200, V500R001C00SPC300, V500R001C00SPC500, V500R001C00SPH303, V500R001C00SPH508, V500R001C20, V500R001C20SPC100, V500R001C20SPC100PWE, V500R001C20SPC200, V500R001C20SPC200B062, V500R001C20SPC200PWE, V500R001C20SPC300B078, V500R001C20SPC300PWE, NGFW Module V500R001C00, V500R001C00SPC200, V500R001C00SPC300, V500R001C00SPC500, V500R001C00SPC500PWE, V500R001C00SPH303, V500R001C00SPH508, V500R001C20, V500R001C20SPC100, V500R001C20SPC100PWE, V500R001C20SPC200, V500R001C20SPC200B062, V500R001C20SPC200PWE, V500R001C20SPC300B078, V500R001C20SPC300PWE, NIP6300 V500R001C00, V500R001C00SPC200, V500R001C00SPC300, V500R001C00SPC500, V500R001C00SPH303, V500R001C00SPH508, V500R001C20, V500R001C20SPC100, V500R001C20SPC100PWE, V500R001C20SPC200, V500R001C20SPC200B062, V500R001C20SPC200PWE, V500R001C20SPC300B078, V500R001C20SPC300PWE, NIP6600 V500R001C00, V500R001C00SPC200, V500R001C00SPC300, V500R001C00SPC500, V500R001C00SPH303, V500R001C00SPH508, V500R001C20, V500R001C20SPC100, V500R001C20SPC100PWE, V500R001C20SPC200, V500R001C20SPC200B062, V500R001C20SPC200PWE, V500R001C20SPC300B078, Secospace USG6300 V500R001C00, V500R001C00SPC200, V500R001C00SPC300, V500R001C00SPC500, V500R001C00SPC500PWE, V500R001C00SPH303, V500R001C00SPH508, V500R001C20, V500R001C20SPC100, V500R001C20SPC100PWE, V500R001C20SPC101, V500R001C20SPC200, V500R001C20SPC200B062, V500R001C20SPC200PWE, V500R001C20SPC300B078, V500R001C20SPC300PWE, Secospace USG6500 V500R001C00, V500R001C00SPC200, V500R001C00SPC300, V500R001C00SPC500, V500R001C00SPC500PWE, V500R001C00SPH303, V500R001C00SPH508, V500R001C20, V500R001C20SPC100, V500R001C20SPC100PWE, V500R001C20SPC101, V500R001C20SPC200, V500R001C20SPC200B062, V500R001C20SPC200PWE, V500R001C20SPC300B078, V500R001C20SPC300PWE, Secospace USG6600 V500R001C00, V500R001C00SPC100, V500R001C00SPC200, V500R001C00SPC300, V500R001C00SPC301, V500R001C00SPC500, V500R001C00SPC500PWE, V500R001C00SPH303, V500R001C20, V500R001C20SPC100, V500R001C20SPC100PWE, V500R001C20SPC101, V500R001C20SPC200, V500R001C20SPC200PWE, V500R001C20SPC300, V500R001C20SPC300B078, V500R001C20SPC300PWE, USG9500 V500R001C00, V500R001C00SPC200, V500R001C00SPC300, V500R001C00SPC303, V500R001C00SPC500, V500R001C00SPC500PWE, V500R001C00SPH303, V500R001C00SPH508, V500R001C20, V500R001C20SPC100, V500R001C20SPC100PWE, V500R001C20SPC101, V500R001C20SPC200, V500R001C20SPC200B062, V500R001C20SPC200PWE, V500R001C20SPC300B078, V500R001C20SPC300PWE has an out-of-bounds memory access vulnerability due to insufficient input validation. An attacker could exploit it to craft special packets to trigger out-of-bounds memory access, which may further lead to system exceptions.

Huawei DP300 V500R002C00; RP200 V600R006C00; TE30 V100R001C10; V500R002C00; V600R006C00; TE40 V500R002C00; V600R006C00; TE50 V500R002C00; V600R006C00; TE60 V100R001C10; V500R002C00; V600R006C00 have a numeric errors vulnerability. An unauthenticated, remote attacker may send specially crafted SCCP messages to the affected products. Due to the improper validation of the messages, it will cause numeric errors when handling the messages. Successful exploit will cause some services abnormal.

The Zend Engine in PHP before 5.4.16 RC1, and 5.5.0 before RC2, does not properly determine whether a parser error occurred, which allows context-dependent attackers to cause a denial of service (memory consumption and application crash) via a crafted function definition, as demonstrated by an attack within a shared web-hosting environment. NOTE: the vendor's http://php.net/security-note.php page says "for critical security situations you should be using OS-level security by running multiple web servers each as their own user id.

Microsoft Windows XP SP2 and SP3, Windows Server 2003 SP2, Windows Vista SP2, Windows Server 2008 SP2 and R2 SP1, Windows 7 SP1, Windows 8, Windows 8.1, Windows Server 2012 Gold and R2, and Windows RT Gold and 8.1 allow remote attackers to cause a denial of service (daemon hang) via a web-service request containing a crafted X.509 certificate that is not properly handled during validation, aka "Digital Signatures Vulnerability."

The (1) power and (2) ipmi_boot actions in the HostController in Foreman before 1.2.2 allow remote attackers to cause a denial of service (memory consumption) via unspecified input that is converted to a symbol.

In Wireshark 2.2.0 to 2.2.7 and 2.0.0 to 2.0.13, the AMQP dissector could crash. This was addressed in epan/dissectors/packet-amqp.c by checking for successful list dissection.

epan/dissectors/packet-gtpv2.c in the GTPv2 dissector in Wireshark 1.8.x before 1.8.7 calls incorrect functions in certain contexts related to ciphers, which allows remote attackers to cause a denial of service (application crash) via a malformed packet.

The DTLS dissector in Wireshark 1.6.x before 1.6.14 and 1.8.x before 1.8.6 does not validate the fragment offset before invoking the reassembly state machine, which allows remote attackers to cause a denial of service (application crash) via a large offset value that triggers write access to an invalid memory location.