In Wireshark 2.4.0 to 2.4.4 and 2.2.0 to 2.2.12, epan/dissectors/packet-sccp.c had an infinite loop that was addressed by using a correct integer data type.
In Wireshark 2.4.0 to 2.4.4 and 2.2.0 to 2.2.12, epan/dissectors/packet-reload.c had an infinite loop that was addressed by validating a length.
In Wireshark 2.4.0 to 2.4.4 and 2.2.0 to 2.2.12, epan/dissectors/packet-rpki-rtr.c had an infinite loop that was addressed by validating a length field.
In Wireshark 2.4.0 to 2.4.4 and 2.2.0 to 2.2.12, epan/dissectors/packet-ber.c had an infinite loop that was addressed by validating a length.
In Wireshark 2.4.0 to 2.4.4 and 2.2.0 to 2.2.12, epan/dissectors/packet-dcm.c had an infinite loop that was addressed by checking for integer wraparound.
An error within the "parse_rollei()" function (internal/dcraw_common.cpp) within LibRaw versions prior to 0.19.1 can be exploited to trigger an infinite loop.
w3m through 0.5.3 is prone to an infinite recursion flaw in HTMLlineproc0 because the feed_table_block_tag function in table.c does not prevent a negative indent value.
The Quagga BGP daemon (bgpd) prior to version 1.2.3 has a bug in its parsing of "Capabilities" in BGP OPEN messages, in the bgp_packet.c:bgp_capability_msg_parse function. The parser can enter an infinite loop on invalid capabilities if a Multi-Protocol capability does not have a recognized AFI/SAFI, causing a denial of service.
libcurl provides the `CURLOPT_CERTINFO` option to allow applications torequest details to be returned about a server's certificate chain.Due to an erroneous function, a malicious server could make libcurl built withNSS get stuck in a never-ending busy-loop when trying to retrieve thatinformation.
An issue was discovered in dns.c in HAProxy through 1.8.14. In the case of a compressed pointer, a crafted packet can trigger infinite recursion by making the pointer point to itself, or create a long chain of valid pointers resulting in stack exhaustion.
QEMU can have an infinite loop in hw/rdma/vmw/pvrdma_dev_ring.c because return values are not checked (and -1 is mishandled).
In Wireshark 2.6.0 to 2.6.4 and 2.4.0 to 2.4.10, the MMSE dissector could go into an infinite loop. This was addressed in epan/dissectors/packet-mmse.c by preventing length overflows.
PJSIP is a free and open source multimedia communication library written in the C language. Versions 2.12 and prior contain a denial-of-service vulnerability that affects PJSIP users that consume PJSIP's XML parsing in their apps. Users are advised to update. There are no known workarounds.
An issue was discovered in MultiPartParser in Django 2.2 before 2.2.27, 3.2 before 3.2.12, and 4.0 before 4.0.2. Passing certain inputs to multipart forms could result in an infinite loop when parsing files.
A vulnerability was found in the way RemoteMessageChannel, introduced in jboss-remoting versions 3.3.10, reads from an empty buffer. An attacker could use this flaw to cause denial of service via high CPU caused by an infinite loop.
An issue was discovered in the DNS proxy in Connman through 1.40. The TCP server reply implementation has an infinite loop if no data is received.
In Wireshark 2.2.0 to 2.2.5 and 2.0.0 to 2.0.11, the SLSK dissector could go into an infinite loop, triggered by packet injection or a malformed capture file. This was addressed in epan/dissectors/packet-slsk.c by adding checks for the remaining length.
In Wireshark 2.2.0 to 2.2.4 and 2.0.0 to 2.0.10, there is an RTMPT dissector infinite loop, triggered by packet injection or a malformed capture file. This was addressed in epan/dissectors/packet-rtmpt.c by properly incrementing a certain sequence value.
It was found in Undertow before 1.3.28 that with non-clean TCP close, the Websocket server gets into infinite loop on every IO thread, effectively causing DoS.
A flaw was found in the way HAProxy processed HTTP responses containing the "Set-Cookie2" header. This flaw could allow an attacker to send crafted HTTP response packets which lead to an infinite loop, eventually resulting in a denial of service condition. The highest threat from this vulnerability is availability.
The BN_mod_sqrt() function, which computes a modular square root, contains a bug that can cause it to loop forever for non-prime moduli. Internally this function is used when parsing certificates that contain elliptic curve public keys in compressed form or explicit elliptic curve parameters with a base point encoded in compressed form. It is possible to trigger the infinite loop by crafting a certificate that has invalid explicit curve parameters. Since certificate parsing happens prior to verification of the certificate signature, any process that parses an externally supplied certificate may thus be subject to a denial of service attack. The infinite loop can also be reached when parsing crafted private keys as they can contain explicit elliptic curve parameters. Thus vulnerable situations include: - TLS clients consuming server certificates - TLS servers consuming client certificates - Hosting providers taking certificates or private keys from customers - Certificate authorities parsing certification requests from subscribers - Anything else which parses ASN.1 elliptic curve parameters Also any other applications that use the BN_mod_sqrt() where the attacker can control the parameter values are vulnerable to this DoS issue. In the OpenSSL 1.0.2 version the public key is not parsed during initial parsing of the certificate which makes it slightly harder to trigger the infinite loop. However any operation which requires the public key from the certificate will trigger the infinite loop. In particular the attacker can use a self-signed certificate to trigger the loop during verification of the certificate signature. This issue affects OpenSSL versions 1.0.2, 1.1.1 and 3.0. It was addressed in the releases of 1.1.1n and 3.0.2 on the 15th March 2022. Fixed in OpenSSL 3.0.2 (Affected 3.0.0,3.0.1). Fixed in OpenSSL 1.1.1n (Affected 1.1.1-1.1.1m). Fixed in OpenSSL 1.0.2zd (Affected 1.0.2-1.0.2zc).
It was discovered that a programming error in the processing of HTTPS requests in the Apache Tomcat servlet and JSP engine may result in denial of service via an infinite loop. The denial of service is easily achievable as a consequence of backporting a CVE-2016-6816 fix but not backporting the fix for Tomcat bug 57544. Distributions affected by this backporting issue include Debian (before 7.0.56-3+deb8u8 and 8.0.14-1+deb8u7 in jessie) and Ubuntu.
The receive_msg function in receive.c in the SMTP daemon in Exim 4.88 and 4.89 allows remote attackers to cause a denial of service (infinite loop and stack exhaustion) via vectors involving BDAT commands and an improper check for a '.' character signifying the end of the content, related to the bdat_getc function.
In systemd 223 through 235, a remote DNS server can respond with a custom crafted DNS NSEC resource record to trigger an infinite loop in the dns_packet_read_type_window() function of the 'systemd-resolved' service and cause a DoS of the affected service.
A flaw was discovered in OpenLDAP before 2.4.57 leading to an infinite loop in slapd with the cancel_extop Cancel operation, resulting in denial of service.
Infinite loop in the RTMPT dissector in Wireshark 3.6.0 and 3.4.0 to 3.4.10 allows denial of service via packet injection or crafted capture file
Crash in the RFC 7468 dissector in Wireshark 3.6.0 and 3.4.0 to 3.4.10 allows denial of service via packet injection or crafted capture file
The rencode package through 1.0.6 for Python allows an infinite loop in typecode decoding (such as via ;\x2f\x7f), enabling a remote attack that consumes CPU and memory.
In Wireshark 3.2.0 to 3.2.7, the GQUIC dissector could crash. This was addressed in epan/dissectors/packet-gquic.c by correcting the implementation of offset advancement.
In Wireshark through 3.2.7, the Facebook Zero Protocol (aka FBZERO) dissector could enter an infinite loop. This was addressed in epan/dissectors/packet-fbzero.c by correcting the implementation of offset advancement.
It was found that when Keycloak before 2.5.5 receives a Logout request with a Extensions in the middle of the request, the SAMLSloRequestParser.parse() method ends in a infinite loop. An attacker could use this flaw to conduct denial of service attacks.
Go before 1.13.15 and 14.x before 1.14.7 can have an infinite read loop in ReadUvarint and ReadVarint in encoding/binary via invalid inputs.
In Wireshark 3.2.0 to 3.2.4, the GVCP dissector could go into an infinite loop. This was addressed in epan/dissectors/packet-gvcp.c by ensuring that an offset increases in all situations.
Trustwave ModSecurity 3.x through 3.0.4 allows denial of service via a special request. NOTE: The discoverer reports "Trustwave has signaled they are disputing our claims." The CVE suggests that there is a security issue with how ModSecurity handles regular expressions that can result in a Denial of Service condition. The vendor does not consider this as a security issue because1) there is no default configuration issue here. An attacker would need to know that a rule using a potentially problematic regular expression was in place, 2) the attacker would need to know the basic nature of the regular expression itself to exploit any resource issues. It's well known that regular expression usage can be taxing on system resources regardless of the use case. It is up to the administrator to decide on when it is appropriate to trade resources for potential security benefit
An issue was discovered in LibVNCServer before 0.9.13. An improperly closed TCP connection causes an infinite loop in libvncclient/sockets.c.
The x/text package before 0.3.3 for Go has a vulnerability in encoding/unicode that could lead to the UTF-16 decoder entering an infinite loop, causing the program to crash or run out of memory. An attacker could provide a single byte to a UTF16 decoder instantiated with UseBOM or ExpectBOM to trigger an infinite loop if the String function on the Decoder is called, or the Decoder is passed to golang.org/x/text/transform.String.
The payload length in a WebSocket frame was not correctly validated in Apache Tomcat 10.0.0-M1 to 10.0.0-M6, 9.0.0.M1 to 9.0.36, 8.5.0 to 8.5.56 and 7.0.27 to 7.0.104. Invalid payload lengths could trigger an infinite loop. Multiple requests with invalid payload lengths could lead to a denial of service.
Unbound before 1.10.1 has an infinite loop via malformed DNS answers received from upstream servers.
The Library API in buger jsonparser through 2019-12-04 allows attackers to cause a denial of service (infinite loop) via a Delete call.
Openwsman, versions up to and including 2.6.9, are vulnerable to infinite loop in process_connection() when parsing specially crafted HTTP requests. A remote, unauthenticated attacker can exploit this vulnerability by sending malicious HTTP request to cause denial of service to openwsman server.
Unbound before 1.9.5 allows an infinite loop via a compressed name in dname_pkt_copy. NOTE: The vendor disputes that this is a vulnerability. Although the code may be vulnerable, a running Unbound installation cannot be remotely or locally exploited
In Lib/tarfile.py in Python through 3.8.3, an attacker is able to craft a TAR archive leading to an infinite loop when opened by tarfile.open, because _proc_pax lacks header validation.
OctoRPKI does not limit the depth of a certificate chain, allowing for a CA to create children in an ad-hoc fashion, thereby making tree traversal never end.
The file name encoding algorithm used internally in Apache Commons Compress 1.15 to 1.18 can get into an infinite loop when faced with specially crafted inputs. This can lead to a denial of service attack if an attacker can choose the file names inside of an archive created by Compress.
golang.org/x/net before v0.0.0-20210520170846-37e1c6afe023 allows attackers to cause a denial of service (infinite loop) via crafted ParseFragment input.
In Wireshark 3.0.0, the GSUP dissector could go into an infinite loop. This was addressed in epan/dissectors/packet-gsm_gsup.c by rejecting an invalid Information Element length.
In Wireshark 3.0.0, the IEEE 802.11 dissector could go into an infinite loop. This was addressed in epan/dissectors/packet-ieee80211.c by detecting cases in which the bit offset does not advance.
In Wireshark 3.0.0, the Rbm dissector could go into an infinite loop. This was addressed in epan/dissectors/file-rbm.c by handling unknown object types safely.
scapy 2.4.0 is affected by: Denial of Service. The impact is: infinite loop, resource consumption and program unresponsive. The component is: _RADIUSAttrPacketListField.getfield(self..). The attack vector is: over the network or in a pcap. both work.
Pydantic is a data validation and settings management using Python type hinting. In affected versions passing either `'infinity'`, `'inf'` or `float('inf')` (or their negatives) to `datetime` or `date` fields causes validation to run forever with 100% CPU usage (on one CPU). Pydantic has been patched with fixes available in the following versions: v1.8.2, v1.7.4, v1.6.2. All these versions are available on pypi(https://pypi.org/project/pydantic/#history), and will be available on conda-forge(https://anaconda.org/conda-forge/pydantic) soon. See the changelog(https://pydantic-docs.helpmanual.io/) for details. If you absolutely can't upgrade, you can work around this risk using a validator(https://pydantic-docs.helpmanual.io/usage/validators/) to catch these values. This is not an ideal solution (in particular you'll need a slightly different function for datetimes), instead of a hack like this you should upgrade pydantic. If you are not using v1.8.x, v1.7.x or v1.6.x and are unable to upgrade to a fixed version of pydantic, please create an issue at https://github.com/samuelcolvin/pydantic/issues requesting a back-port, and we will endeavour to release a patch for earlier versions of pydantic.