Advantech EKI-132x devices with firmware before 2015-12-31 allow remote attackers to bypass authentication via unspecified vectors.

Stack-based buffer overflow in opcImg.asp in Advantech/BroadWin WebAccess before 7.0 allows remote attackers to execute arbitrary code via unspecified vectors.

Format string vulnerability in Advantech/BroadWin WebAccess before 7.0 allows remote attackers to execute arbitrary code via format string specifiers in a message string.

A Path Traversal issue was discovered in WebAccess versions 8.3.2 and earlier. An attacker has access to files within the directory structure of the target device.

Buffer overflow in an ActiveX control in Advantech/BroadWin WebAccess before 7.0 might allow remote attackers to execute arbitrary code via a long string value in unspecified parameters.

Buffer overflow in Advantech/BroadWin WebAccess before 7.0 allows remote attackers to execute arbitrary code via a long string value in unspecified parameters.

Advantech/BroadWin WebAccess before 7.0 allows remote attackers to trigger the extraction of arbitrary web content into a batch file on a client system, and execute this batch file, via unspecified vectors.

An Improper Restriction Of Operations Within The Bounds Of A Memory Buffer issue was discovered in Advantech WebAccess versions prior to V8.2_20170817. Researchers have identified multiple vulnerabilities that allow invalid locations to be referenced for the memory buffer, which may allow an attacker to execute arbitrary code or cause the system to crash.

Buffer overflow in the Advantech ADAM OLE for Process Control (OPC) Server ActiveX control in ADAM OPC Server before 3.01.012, Modbus RTU OPC Server before 3.01.010, and Modbus TCP OPC Server before 3.01.010 allows remote attackers to execute arbitrary code via unspecified vectors.

BB-ESWGP506-2SFP-T versions 1.01.09 and prior is vulnerable due to the use of hard-coded credentials, which may allow an attacker to gain unauthorized access and permit the execution of arbitrary code on the BB-ESWGP506-2SFP-T (versions 1.01.01 and prior).

Multiple stack-based buffer overflows in Advantech WebAccess before 8.1 allow remote attackers to execute arbitrary code via unspecified vectors.

Advantech EKI-122x-BE devices with firmware before 1.65, EKI-132x devices with firmware before 1.98, and EKI-136x devices with firmware before 1.27 have hardcoded SSH keys, which makes it easier for remote attackers to obtain access via an SSH session.

Buffer overflow in the BwpAlarm subsystem in Advantech WebAccess before 8.1 allows remote attackers to cause a denial of service via a crafted RPC request.

Integer overflow in the Kernel service in Advantech WebAccess before 8.1 allows remote attackers to execute arbitrary code or cause a denial of service (stack-based buffer overflow) via a crafted RPC request.

Unrestricted file upload vulnerability in the uploadImageCommon function in the UploadAjaxAction script in the WebAccess Dashboard Viewer in Advantech WebAccess before 8.1 allows remote attackers to write to files of arbitrary types via unspecified vectors.

Buffer overflow on Advantech EKI-1200 gateways with firmware before 1.63 allows remote attackers to execute arbitrary code via unspecified vectors.

The web interface on Advantech/B+B SmartWorx VESP211-EU devices with firmware 1.7.2 and VESP211-232 devices with firmware 1.5.1 and 1.7.2 relies on the client to implement access control, which allows remote attackers to perform administrative actions via modified JavaScript code.

Multiple stack-based buffer overflows in unspecified DLL files in Advantech WebAccess before 8.0.1 allow remote attackers to execute arbitrary code via unknown vectors.

Buffer overflow in an ActiveX control in bwocxrun.ocx in Advantech/BroadWin WebAccess before 7.0 allows remote attackers to execute arbitrary code by leveraging the ability to write arbitrary content to any pathname.

Advantech WISE-PaaS/RMM, Versions 3.3.29 and prior. There is an unsecured function that allows anyone who can access the IP address to use the function without authentication.

Stack-based buffer overflow in NTWebServer.exe in the test web service in InduSoft NTWebServer, as distributed in Advantech Studio 6.1 and InduSoft Web Studio 7.0, allows remote attackers to cause a denial of service (daemon crash) or possibly execute arbitrary code via a long request to TCP port 80.

The Advantech ADAM-6000 module has 00000000 as its default password, which makes it easier for remote attackers to obtain access through an HTTP session, and (1) monitor or (2) control the module's Modbus/TCP I/O activity.

Multiple issues exist that allow files to be uploaded and executed on the WebAccess/NMS (versions prior to 3.0.2).

Advantech WISE-PaaS/RMM, Versions 3.3.29 and prior. Path traversal vulnerabilities are caused by a lack of proper validation of a user-supplied path prior to use in file operations. An attacker can leverage these vulnerabilities to remotely execute code while posing as an administrator.

The VBWinExec function in Node\AspVBObj.dll in Advantech WebAccess 8.3.0 allows remote attackers to execute arbitrary OS commands via a single argument (aka the command parameter).

Multiple heap-based buffer overflows in Advantech WebAccess before 8.1 allow remote attackers to execute arbitrary code via unspecified vectors.

An OS Command Injection vulnerability exists in the ping.php script functionality of Advantech R-SeeNet v 2.4.12 (20.10.2020). A specially crafted HTTP request can lead to arbitrary OS command execution. An attacker can send a crafted HTTP request to trigger this vulnerability.

uaddUpAdmin.asp in Advantech/BroadWin WebAccess before 7.0 does not properly perform authentication, which allows remote attackers to modify an administrative password via a password-change request.

An Improper Authentication issue was discovered in Advantech WebAccess versions prior to V8.2_20170817. Specially crafted requests allow a possible authentication bypass that could allow remote code execution.

An issue was discovered in Advantech WebAccess Version 8.1. By accessing a specific uniform resource locator (URL) on the web server, a malicious user is able to access pages unrestricted (AUTHENTICATION BYPASS).

WebAccess/NMS (Versions prior to v3.0.3_Build6299) has an improper authentication vulnerability, which may allow unauthorized users to view resources monitored and controlled by the WebAccess/NMS, as well as IP addresses and names of all the devices managed via WebAccess/NMS.

WebAccess/SCADA, Version 8.3. Specially crafted requests could allow a possible authentication bypass that could allow an attacker to obtain and manipulate sensitive information.

WebAccess/SCADA, Version 8.3. An improper authentication vulnerability exists that could allow a possible authentication bypass allowing an attacker to upload malicious data.

It was discovered that the Western Digital My Cloud device before 2.30.196 is affected by an authentication bypass vulnerability. An unauthenticated attacker can exploit this vulnerability to authenticate as an admin user without needing to provide a password, thereby gaining full control of the device. (Whenever an admin logs into My Cloud, a server-side session is created that is bound to the user's IP address. After the session is created, it is possible to call authenticated CGI modules by sending the cookie username=admin in the HTTP request. The invoked CGI will check if a valid session is present and bound to the user's IP address.) It was found that it is possible for an unauthenticated attacker to create a valid session without a login. The network_mgr.cgi CGI module contains a command called "cgi_get_ipv6" that starts an admin session -- tied to the IP address of the user making the request -- if the additional parameter "flag" with the value "1" is provided. Subsequent invocation of commands that would normally require admin privileges now succeed if an attacker sets the username=admin cookie.

An issue was discovered in SMA Solar Technology products. An attacker can use Sunny Explorer or the SMAdata2+ network protocol to update the device firmware without ever having to authenticate. If an attacker is able to create a custom firmware version that is accepted by the inverter, the inverter is compromised completely. This allows the attacker to do nearly anything: for example, giving access to the local OS, creating a botnet, using the inverters as a stepping stone into companies, etc. NOTE: the vendor reports that this attack has always been blocked by "a final integrity and compatibility check." Also, only Sunny Boy TLST-21 and TL-21 and Sunny Tripower TL-10 and TL-30 could potentially be affected

In OpenBMC 2.9, crafted IPMI messages allow an attacker to bypass authentication and gain full control of the system.

EMC NetWorker may potentially be vulnerable to an unauthenticated remote code execution vulnerability in the Networker Client execution service (nsrexecd) when oldauth authentication method is used. An unauthenticated remote attacker could send arbitrary commands via RPC service to be executed on the host system with the privileges of the nsrexecd service, which runs with administrative privileges.

AIRTAME HDMI dongle with firmware before 2.2.0 allows unauthenticated access to a big part of the management interface. It is possible to extract all information including the Wi-Fi password, reboot, or force a software update at an arbitrary time.

On certain Brother devices, authorization is mishandled by including a valid AuthCookie cookie in the HTTP response to a failed login attempt. Affected models are: MFC-J6973CDW MFC-J4420DW MFC-8710DW MFC-J4620DW MFC-L8850CDW MFC-J3720 MFC-J6520DW MFC-L2740DW MFC-J5910DW MFC-J6920DW MFC-L2700DW MFC-9130CW MFC-9330CDW MFC-9340CDW MFC-J5620DW MFC-J6720DW MFC-L8600CDW MFC-L9550CDW MFC-L2720DW DCP-L2540DW DCP-L2520DW HL-3140CW HL-3170CDW HL-3180CDW HL-L8350CDW HL-L2380DW ADS-2500W ADS-1000W ADS-1500W.

FURUNO FELCOM 250 and 500 devices use only client-side JavaScript in login.js for authentication.

An issue was discovered in dnaTools dnaLIMS 4-2015s13. dnaLIMS is vulnerable to unauthenticated command execution through an improperly protected administrative web shell (cgi-bin/dna/sysAdmin.cgi POST requests).

A vulnerability in the web-based GUI of Cisco Mobility Express 1800 Series Access Points could allow an unauthenticated, remote attacker to bypass authentication. The attacker could be granted full administrator privileges. The vulnerability is due to improper implementation of authentication for accessing certain web pages using the GUI interface. An attacker could exploit this vulnerability by sending a crafted HTTP request to the web interface of the affected system. A successful exploit could allow the attacker to bypass authentication and perform unauthorized configuration changes or issue control commands to the affected device. This vulnerability affects Cisco Mobility Express 1800 Series Access Points running a software version prior to 8.2.110.0. Cisco Bug IDs: CSCuy68219.

EMC Network Configuration Manager (NCM) 9.3.x, EMC Network Configuration Manager (NCM) 9.4.0.x, EMC Network Configuration Manager (NCM) 9.4.1.x, EMC Network Configuration Manager (NCM) 9.4.2.x contains an Improper Authentication vulnerability that could potentially be exploited by malicious users to compromise the affected system.

EMC Network Configuration Manager (NCM) 9.3.x, EMC Network Configuration Manager (NCM) 9.4.0.x, EMC Network Configuration Manager (NCM) 9.4.1.x, EMC Network Configuration Manager (NCM) 9.4.2.x contains a Java RMI Remote Code Execution vulnerability that could potentially be exploited by malicious users to compromise the affected system.

The ComputePassword function in the Schneider Electric Quantum Ethernet Module on the NOE 771 device (aka the Quantum 140NOE771* module) generates the password for the fwupgrade account by performing a calculation on the MAC address, which makes it easier for remote attackers to obtain access via a (1) ARP request message or (2) Neighbor Solicitation message.

The identity authentication bypass vulnerability found in some Dahua products during the login process. Attackers can bypass device identity authentication by constructing malicious data packets.

Delta Electronics DIAEnergie Version 1.7.5 and prior may allow an attacker to add a new administrative user without being authenticated or authorized, which may allow the attacker to log in and use the device with administrative privileges.

In Android before 2018-01-05 on Qualcomm Snapdragon IoT, Snapdragon Mobile, Snapdragon Automobile APQ8096AU, MDM9206, MDM9650, MSM8996AU, SD 210/SD 212/SD 205, SD 425, SD 430, SD 625, SD 650/52, SD 820, SD 835, it is possible for the XBL loader to skip the authentication of device config.

OneOrZero Action & Information Management System (AIMS) 2.7.0 allows remote attackers to bypass authentication and obtain administrator privileges via a crafted oozimsrememberme cookie.

An issue was discovered in EMC Avamar Server 7.1.x, 7.2.x, 7.3.x, 7.4.x, 7.5.0; EMC NetWorker Virtual Edition (NVE) 9.0.x, 9.1.x, 9.2.x; and EMC Integrated Data Protection Appliance 2.0. A remote unauthenticated malicious user can potentially bypass application authentication and gain unauthorized root access to the affected systems.