A vulnerability was found in the Linux kernel in versions prior to v5.14-rc1. Missing size validations on inbound SCTP packets may allow the kernel to read uninitialized memory.
In the Linux kernel through 5.13.7, an unprivileged BPF program can obtain sensitive information from kernel memory via a Speculative Store Bypass side-channel attack because the protection mechanism neglects the possibility of uninitialized memory locations on the BPF stack.
aria2c in aria2 1.33.1, when --log is used, can store an HTTP Basic Authentication username and password in a file, which might allow local users to obtain sensitive information by reading this file.
reportbug before 2.62 creates the .reportbugrc configuration file with world-readable permissions, which allows local users to obtain email smarthost passwords.
reportbug 3.2 includes settings from .reportbugrc in bug reports, which exposes sensitive information such as smtpuser and smtppasswd.
kernel/bpf/verifier.c in the Linux kernel through 5.12.1 performs undesirable speculative loads, leading to disclosure of stack content via side-channel attacks, aka CID-801c6058d14a. The specific concern is not protecting the BPF stack area against speculative loads. Also, the BPF stack can contain uninitialized data that might represent sensitive information previously operated on by the kernel.
An issue was discovered in the Linux kernel before 5.11.11. qrtr_recvmsg in net/qrtr/qrtr.c allows attackers to obtain sensitive information from kernel memory because of a partially uninitialized data structure, aka CID-50535249f624.
Debian GNU/Linux 3.0 installs the libpam-radius-auth package with the pam_radius_auth.conf set to be world-readable, which allows local users to obtain sensitive information.
A cryptographic cache-based side channel in the RSA implementation in Botan before 1.10.17, and 1.11.x and 2.x before 2.3.0, allows a local attacker to recover information about RSA secret keys, as demonstrated by CacheD. This occurs because an array is indexed with bits derived from a secret key.
An issue was discovered in Xen 4.9 through 4.14.x. On Arm, a guest is allowed to control whether memory accesses are bypassing the cache. This means that Xen needs to ensure that all writes (such as the ones during scrubbing) have reached the memory before handing over the page to a guest. Unfortunately, the operation to clean the cache is happening before checking if the page was scrubbed. Therefore there is no guarantee when all the writes will reach the memory.
Multiple vulnerabilities in suidperl 5.6.1 and earlier allow a local user to obtain sensitive information about files for which the user does not have appropriate permissions.
The tcf_act_police_dump function in net/sched/act_police.c in the actions implementation in the network queueing functionality in the Linux kernel before 2.6.36-rc4 does not properly initialize certain structure members, which allows local users to obtain potentially sensitive information from kernel memory via vectors involving a dump operation. NOTE: this vulnerability exists because of an incomplete fix for CVE-2010-2942.
The eql_g_master_cfg function in drivers/net/eql.c in the Linux kernel before 2.6.36-rc5 does not properly initialize a certain structure member, which allows local users to obtain potentially sensitive information from kernel stack memory via an EQL_GETMASTRCFG ioctl call.
Vulnerability in FAM 2.6.8, 2.6.6, and other versions allows unprivileged users to obtain the names of files whose access is restricted to the root group.
sgml-tools (aka sgmltools) before 1.0.9-15 creates temporary files with insecure permissions, which allows other users to read files that are being processed by sgml-tools.
glibc 2.1.9x and earlier does not properly clear the RESOLV_HOST_CONF, HOSTALIASES, or RES_OPTIONS environmental variables when executing setuid/setgid programs, which could allow local users to read arbitrary files.
sash before 3.4-4 in Debian GNU/Linux does not properly clone /etc/shadow, which makes it world-readable and could allow local users to gain privileges via password cracking.
cpio on FreeBSD 2.1.0, Debian GNU/Linux 3.0, and possibly other operating systems, uses a 0 umask when creating files using the -O (archive) or -F options, which creates the files with mode 0666 and allows local users to read or overwrite those files.
liboping 1.3.2 allows users reading arbitrary files upon the local system.
In uvc_parse_standard_control of uvc_driver.c, there is a possible out-of-bound read due to improper input validation. This could lead to local information disclosure with no additional execution privileges needed. User interaction is not needed for exploitation. Product: Android. Versions: Android kernel. Android ID: A-111760968.
In append_to_verify_fifo_interleaved_ of stream_encoder.c, there is a possible out of bounds write due to a missing bounds check. This could lead to local information disclosure with no additional execution privileges needed. User interaction is not needed for exploitation.Product: AndroidVersions: Android-11Android ID: A-174302683
Vulnerability in the Java SE, Java SE Embedded, JRockit component of Oracle Java SE (subcomponent: Security). Supported versions that are affected are Java SE: 6u161, 7u151, 8u144 and 9; Java SE Embedded: 8u144; JRockit: R28.3.15. Easily exploitable vulnerability allows unauthenticated attacker with logon to the infrastructure where Java SE, Java SE Embedded, JRockit executes to compromise Java SE, Java SE Embedded, JRockit. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Java SE, Java SE Embedded, JRockit accessible data. Note: This vulnerability can be exploited through sandboxed Java Web Start applications and sandboxed Java applets. It can also be exploited by supplying data to APIs in the specified Component without using sandboxed Java Web Start applications or sandboxed Java applets, such as through a web service. CVSS 3.0 Base Score 6.2 (Confidentiality impacts). CVSS Vector: (CVSS:3.0/AV:L/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N).
Improper removal of sensitive information before storage or transfer in some Intel(R) Processors may allow an authenticated user to potentially enable information disclosure via local access.
In cloud-init through 19.4, rand_user_password in cloudinit/config/cc_set_passwords.py has a small default pwlen value, which makes it easier for attackers to guess passwords.
Improper isolation of shared resources in some Intel(R) Processors may allow an authenticated user to potentially enable information disclosure via local access.
In the Linux kernel through 5.4.6, there are information leaks of uninitialized memory to a USB device in the drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c driver, aka CID-da2311a6385c.
In the Linux kernel before 5.2.9, there is an info-leak bug that can be caused by a malicious USB device in the drivers/net/can/usb/peak_usb/pcan_usb_fd.c driver, aka CID-30a8beeb3042.
On the x86-64 architecture, the GNU C Library (aka glibc) before 2.31 fails to ignore the LD_PREFER_MAP_32BIT_EXEC environment variable during program execution after a security transition, allowing local attackers to restrict the possible mapping addresses for loaded libraries and thus bypass ASLR for a setuid program.
In the Linux kernel before 5.2.9, there is an info-leak bug that can be caused by a malicious USB device in the drivers/net/can/usb/peak_usb/pcan_usb_pro.c driver, aka CID-ead16e53c2f0.
In the Linux kernel before 5.3.11, there is an info-leak bug that can be caused by a malicious USB device in the drivers/net/can/usb/peak_usb/pcan_usb_core.c driver, aka CID-f7a1337f0d29.
An issue was discovered in OpenSC through 0.19.0 and 0.20.x through 0.20.0-rc3. libopensc/card-setcos.c has an incorrect read operation during parsing of a SETCOS file attribute.
Sudo 1.5 in Debian Linux 2.1 and Red Hat 6.0 allows local users to determine the existence of arbitrary files by attempting to execute the target filename as a program, which generates a different error message when the file does not exist.
TSX Asynchronous Abort condition on some CPUs utilizing speculative execution may allow an authenticated user to potentially enable information disclosure via a side channel with local access.
Vulnerability in crontab allows local users to read crontab files of other users by replacing the temporary file that is being edited while crontab is running.
Integer underflow in the cpuset_tasks_read function in the Linux kernel before 2.6.20.13, and 2.6.21.x before 2.6.21.4, when the cpuset filesystem is mounted, allows local users to obtain kernel memory contents by using a large offset when reading the /dev/cpuset/tasks file.
In Ansible, all Ansible Engine versions up to ansible-engine 2.8.5, ansible-engine 2.7.13, ansible-engine 2.6.19, were logging at the DEBUG level which lead to a disclosure of credentials if a plugin used a library that logged credentials at the DEBUG level. This flaw does not affect Ansible modules, as those are executed in a separate process.
apt-cacher-ng through 3.3 allows local users to obtain sensitive information by hijacking the hardcoded TCP port. The /usr/lib/apt-cacher-ng/acngtool program attempts to connect to apt-cacher-ng via TCP on localhost port 3142, even if the explicit SocketPath=/var/run/apt-cacher-ng/socket command-line option is passed. The cron job /etc/cron.daily/apt-cacher-ng (which is active by default) attempts this periodically. Because 3142 is an unprivileged port, any local user can try to bind to this port and will receive requests from acngtool. There can be sensitive data in these requests, e.g., if AdminAuth is enabled in /etc/apt-cacher-ng/security.conf. This sensitive data can leak to unprivileged local users that manage to bind to this port before the apt-cacher-ng daemon can.
Systems with microprocessors utilizing speculative execution and speculative execution of memory reads before the addresses of all prior memory writes are known may allow unauthorized disclosure of information to an attacker with local user access via a side-channel analysis, aka Speculative Store Bypass (SSB), Variant 4.
qmail-verify as used in netqmail 1.06 is prone to an information disclosure vulnerability. A local attacker can test for the existence of files and directories anywhere in the filesystem because qmail-verify runs as root and tests for the existence of files in the attacker's home directory, without dropping its privileges first.
The spectre_v2_select_mitigation function in arch/x86/kernel/cpu/bugs.c in the Linux kernel before 4.18.1 does not always fill RSB upon a context switch, which makes it easier for attackers to conduct userspace-userspace spectreRSB attacks.
The function hso_get_config_data in drivers/net/usb/hso.c in the Linux kernel through 4.19.8 reads if_num from the USB device (as a u8) and uses it to index a small array, resulting in an object out-of-bounds (OOB) read that potentially allows arbitrary read in the kernel address space.
The do_hidp_sock_ioctl function in net/bluetooth/hidp/sock.c in the Linux kernel before 5.0.15 allows a local user to obtain potentially sensitive information from kernel stack memory via a HIDPCONNADD command, because a name field may not end with a '\0' character.
Ansible "User" module leaks any data which is passed on as a parameter to ssh-keygen. This could lean in undesirable situations such as passphrases credentials passed as a parameter for the ssh-keygen executable. Showing those credentials in clear text form for every user which have access just to the process list.
A timing attack flaw was found in OpenSSL 1.0.1u and before that could allow a malicious user with local access to recover ECDSA P-256 private keys.
Directory traversal vulnerability in hw/9pfs/9p.c in QEMU (aka Quick Emulator) allows local guest OS administrators to access host files outside the export path via a .. (dot dot) in an unspecified string.
The C software implementation of AES Encryption and Decryption in wolfSSL (formerly CyaSSL) before 3.9.10 makes it easier for local users to discover AES keys by leveraging cache-bank timing differences.
The vmxnet3_complete_packet function in hw/net/vmxnet3.c in QEMU (aka Quick Emulator) allows local guest OS administrators to obtain sensitive host memory information by leveraging failure to initialize the txcq_descr object.
The megasas_ctrl_get_info function in hw/scsi/megasas.c in QEMU allows local guest OS administrators to obtain sensitive host memory information via vectors related to reading device control information.
The patch_instruction function in hw/i386/kvmvapic.c in QEMU does not initialize the imm32 variable, which allows local guest OS administrators to obtain sensitive information from host stack memory by accessing the Task Priority Register (TPR).
An issue was discovered in Xen through 4.14.x. Neither xenstore implementation does any permission checks when reporting a xenstore watch event. A guest administrator can watch the root xenstored node, which will cause notifications for every created, modified, and deleted key. A guest administrator can also use the special watches, which will cause a notification every time a domain is created and destroyed. Data may include: number, type, and domids of other VMs; existence and domids of driver domains; numbers of virtual interfaces, block devices, vcpus; existence of virtual framebuffers and their backend style (e.g., existence of VNC service); Xen VM UUIDs for other domains; timing information about domain creation and device setup; and some hints at the backend provisioning of VMs and their devices. The watch events do not contain values stored in xenstore, only key names. A guest administrator can observe non-sensitive domain and device lifecycle events relating to other guests. This information allows some insight into overall system configuration (including the number and general nature of other guests), and configuration of other guests (including the number and general nature of other guests' devices). This information might be commercially interesting or might make other attacks easier. There is not believed to be exposure of sensitive data. Specifically, there is no exposure of VNC passwords, port numbers, pathnames in host and guest filesystems, cryptographic keys, or within-guest data.