The metadata flow feature in Cisco IOS 15.1 through 15.3 and IOS XE 3.3.xXO before 3.3.1XO, 3.6.xS and 3.7.xS before 3.7.6S, and 3.8.xS, 3.9.xS, and 3.10.xS before 3.10.1S allows remote attackers to cause a denial of service (device reload) via malformed RSVP packets, aka Bug ID CSCue22753.

Cisco WebEx Recording Format (WRF) player and Advanced Recording Format (ARF) player T27 LD before SP32 EP16, T28 before T28.12, and T29 before T29.2 allow remote attackers to cause a denial of service (application crash) via a crafted (1) .wrf or (2) .arf file that triggers a buffer over-read, aka Bug ID CSCuh52768.

The session-termination functionality on Cisco ONS 15454 controller cards with software 9.6 and earlier does not initialize an unspecified pointer, which allows remote authenticated users to cause a denial of service (card reset) via crafted session-close actions, aka Bug ID CSCug97416.

Buffer overflow in decode.cpp in Cisco OpenH264 1.2.0 and earlier allows remote attackers to execute arbitrary code via an encoded media file.

Use-after-free vulnerability in decode_slice.cpp in Cisco OpenH264 1.2.0 and earlier allows remote attackers to execute arbitrary code via an encoded media file.

Buffer overflow in Cisco Advanced Recording Format (ARF) player T27 LD before SP32 EP16, T28 before T28.12, and T29 before T29.2 allows remote attackers to execute arbitrary code or cause a denial of service (memory corruption and application crash) via a crafted .arf file, aka Bug IDs CSCui72223, CSCul01163, and CSCul01166.

A vulnerability in the software-based SSL/TLS message handler of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to trigger a reload of an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to insufficient validation of SSL/TLS messages when the device performs software-based SSL decryption. An attacker could exploit this vulnerability by sending a crafted SSL/TLS message through an affected device. SSL/TLS messages sent to an affected device do not trigger this vulnerability. A successful exploit could allow the attacker to cause a process to crash. This crash would then trigger a reload of the device. No manual intervention is needed to recover the device after the reload.

A vulnerability in the configuration and monitoring service of the Cisco SD-WAN Solution could allow an authenticated, local attacker to execute arbitrary code with root privileges or cause a denial of service (DoS) condition on an affected device. The vulnerability is due to incomplete bounds checks for data that is provided by the configuration and monitoring service of the affected solution. An attacker could exploit this vulnerability by sending malicious data to the vDaemon listening service on an affected device. A successful exploit could allow the attacker to cause a buffer overflow condition on the affected device, which could allow the attacker to execute arbitrary code with root privileges on the device or cause the vDaemon listening service to reload and result in a DoS condition on the device. This vulnerability affects the following Cisco products if they are running a release of the Cisco SD-WAN Solution prior to Release 18.3.0: vBond Orchestrator Software, vEdge 100 Series Routers, vEdge 1000 Series Routers, vEdge 2000 Series Routers, vEdge 5000 Series Routers, vEdge Cloud Router Platform, vManage Network Management Software, vSmart Controller Software. Cisco Bug IDs: CSCvi70003.

Cisco Adaptive Security Appliance (ASA) Software 8.2.x before 8.2(5.46), 8.3.x before 8.3(2.39), 8.4.x before 8.4(7), 8.5.x before 8.5(1.18), 8.6.x before 8.6(1.12), 8.7.x before 8.7(1.7), 9.0.x before 9.0(3.3), and 9.1.x before 9.1(1.8), when the DNS ALPI engine is enabled for TCP, allows remote attackers to cause a denial of service (device reload) via crafted TCP DNS packets, aka Bug ID CSCug03975.

The Clientless SSL VPN feature in Cisco Adaptive Security Appliance (ASA) Software 8.x before 8.2(5.44), 8.3.x before 8.3(2.39), 8.4.x before 8.4(5.7), 8.6.x before 8.6(1.12), 9.0.x before 9.0(2.6), and 9.1.x before 9.1(1.7) allows remote attackers to cause a denial of service (device reload) via crafted HTTPS requests, aka Bug ID CSCua22709.

Buffer overflow in the Smart Call Home implementation in Cisco NX-OS on Fabric Interconnects in Cisco Unified Computing System 1.4 before 1.4(1i), NX-OS 5.0 before 5.0(3)U2(2) on Nexus 3000 devices, NX-OS 4.1 before 4.1(2)E1(1l) on Nexus 4000 devices, NX-OS 5.x before 5.1(3)N1(1) on Nexus 5000 devices, NX-OS 5.2 before 5.2(3a) on Nexus 7000 devices, and CG-OS CG4 before CG4(2) on Connected 1000 Connected Grid Routers allows remote SMTP servers to execute arbitrary code via a crafted reply, aka Bug IDs CSCtk00695, CSCts56633, CSCts56632, CSCts56628, CSCug14405, and CSCuf61322.

The ALG module in Cisco IOS 15.0 through 15.4 does not properly implement SIP over NAT, which allows remote attackers to cause a denial of service (device reload) via multipart SDP IPv4 traffic, aka Bug ID CSCun54071.

The metadata flow feature in Cisco IOS 15.1 through 15.3 and IOS XE 3.3.xXO before 3.3.1XO, 3.6.xS and 3.7.xS before 3.7.6S, and 3.8.xS, 3.9.xS, and 3.10.xS before 3.10.1S allows remote attackers to cause a denial of service (device reload) via malformed RSVP packets, aka Bug ID CSCug75942.

Heap-based buffer overflow in Cisco TelePresence TC Software 4.x through 6.x before 6.0.1 and TE Software 4.x and 6.0.x before 6.0.2 allows remote attackers to execute arbitrary code via crafted SIP packets, aka Bug ID CSCud81796.

Buffer overflow in Cisco Advanced Recording Format (ARF) player T27 LD before SP32 EP16, T28 before T28.12, and T29 before T29.2 allows remote attackers to execute arbitrary code or cause a denial of service (memory corruption and application crash) via a crafted .arf file that triggers improper LZW decompression, aka Bug ID CSCuj87565.

Buffer overflow in Cisco TelePresence TC Software 4.x and 5.x and TE Software 4.x and 6.0 allows local users to gain privileges by leveraging improper handling of the u-boot compiler flag for internal executable files, aka Bug ID CSCub67693.

Buffer overflow in Cisco Advanced Recording Format (ARF) player T27 LD before SP32 EP16, T28 before T28.12, and T29 before T29.2 allows remote attackers to execute arbitrary code or cause a denial of service (memory corruption and application crash) via a crafted .arf file, aka Bug IDs CSCul87216 and CSCuj07603.

Heap-based buffer overflow in Cisco WebEx Recording Format (WRF) player T27 LD before SP32 EP16, T28 before T28.12, and T29 before T29.2 allows remote attackers to execute arbitrary code or cause a denial of service (memory corruption and application crash) via a crafted audio channel in a .wrf file, aka Bug ID CSCuc39458.

Buffer overflow in Cisco TelePresence TC Software 4.x and 5.x and TE Software 4.x and 6.0 allows remote attackers to execute arbitrary code via crafted DNS response packets, aka Bug ID CSCty44804.

Multiple vulnerabilities in Cisco SD-WAN products could allow an unauthenticated, remote attacker to execute denial of service (DoS) attacks against an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in Cisco SD-WAN vManage Software could allow an unauthenticated, remote attacker to execute arbitrary code or allow an authenticated, local attacker to gain escalated privileges on an affected system. For more information about these vulnerabilities, see the Details section of this advisory.

The WebVPN CIFS implementation in Cisco Adaptive Security Appliance (ASA) Software 9.0(.4.1) and earlier allows remote CIFS servers to cause a denial of service (device reload) via a long share list, aka Bug ID CSCuj83344.

A vulnerability in Cisco Webex Network Recording Player for Windows and MacOS and Cisco Webex Player for Windows and MacOS could allow an attacker to execute arbitrary code on an affected system. The vulnerability is due to insufficient validation of values within Webex recording files formatted as either Advanced Recording Format (ARF) or Webex Recording Format (WRF). An attacker could exploit the vulnerability by sending a user a malicious ARF or WRF file through a link or email attachment and persuading the user to open the file. A successful exploit could allow the attacker to execute arbitrary code on the affected system with the privileges of the targeted user.

The MLDP implementation in Cisco IOS 15.3(3)S and earlier on 7600 routers, when many VRFs are configured, allows remote attackers to cause a denial of service (chunk corruption and device reload) by establishing many multicast flows, aka Bug ID CSCue22345.

A vulnerability in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an unauthenticated, remote attacker to execute arbitrary code on an affected device. The vulnerability is due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit this vulnerability by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system of the affected device. Cisco has not released software updates that address this vulnerability.

A vulnerability in the DECnet Phase IV and DECnet/OSI protocol processing of Cisco IOS XE Software could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to insufficient input validation of DECnet traffic that is received by an affected device. An attacker could exploit this vulnerability by sending DECnet traffic to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition.

The OSPFv3 functionality in Cisco IOS XR 5.1 allows remote attackers to cause a denial of service (process crash) via a malformed LSA Type-1 packet, aka Bug ID CSCuj82176.

The TCP implementation in Cisco IOS does not properly implement the transitions from the ESTABLISHED state to the CLOSED state, which allows remote attackers to cause a denial of service (flood of ACK packets) via a crafted series of ACK and FIN packets, aka Bug ID CSCtz14399.

Multiple vulnerabilities in Cisco SD-WAN products could allow an unauthenticated, remote attacker to execute denial of service (DoS) attacks against an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

The Java process in the Impact server in Cisco Prime Central for Hosted Collaboration Solution (HCS) allows remote attackers to cause a denial of service (process crash) via a flood of TCP packets, aka Bug ID CSCug57345.

Buffer overflow in the Active Template Library (ATL) framework in the VPNAPI COM module in Cisco AnyConnect Secure Mobility Client 2.x allows user-assisted remote attackers to execute arbitrary code via a crafted HTML document, aka Bug ID CSCuj58139.

Cisco NX-OS 5.0 and earlier on MDS 9000 devices allows remote attackers to cause a denial of service (supervisor CPU consumption) via Authentication Header (AH) authentication in a Virtual Router Redundancy Protocol (VRRP) frame, aka Bug ID CSCte27874.

Cisco Unified Communications Manager (aka CUCM or Unified CM) allows remote attackers to cause a denial of service (service restart) via a crafted SIP message, aka Bug ID CSCub54349.

A vulnerability in the Secure Sockets Layer (SSL) input packet processor of Cisco Small Business 200, 300, and 500 Series Managed Switches could allow an unauthenticated, remote attacker to cause a memory corruption on an affected device. The vulnerability is due to improper validation of HTTPS packets. An attacker could exploit this vulnerability by sending a malformed HTTPS packet to the management web interface of the affected device. A successful exploit could allow the attacker to cause an unexpected reload of the device, resulting in a denial of service (DoS) condition.

Buffer overflow in Cisco Unified Communications Manager (Unified CM) 7.1(x) before 7.1(5b)su6, 8.5(x) before 8.5(1)su6, 8.6(x) before 8.6(2a)su3, and 9.x before 9.1(2) allows remote authenticated users to execute arbitrary code via unspecified vectors, aka Bug ID CSCud54358.

The ITM web server in Cisco Prime Central for Hosted Collaboration Solution (HCS) allows remote attackers to cause a denial of service (temporary HTTP service outage) via a flood of TCP packets, aka Bug ID CSCuh36313.

Multiple vulnerabilities in Cisco SD-WAN vEdge Software could allow an attacker to execute arbitrary code as the root user or cause a denial of service (DoS) condition on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities exist in the Link Layer Discovery Protocol (LLDP) implementation for Cisco Small Business RV Series Routers. An unauthenticated, adjacent attacker could execute arbitrary code or cause an affected router to leak system memory or reload. A memory leak or device reload would cause a denial of service (DoS) condition on an affected device. For more information about these vulnerabilities, see the Details section of this advisory. Note: LLDP is a Layer 2 protocol. To exploit these vulnerabilities, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent).

A vulnerability in Cisco Webex Network Recording Player for Windows and MacOS and Cisco Webex Player for Windows and MacOS could allow an attacker to execute arbitrary code on an affected system. This vulnerability is due to insufficient validation of values in Webex recording files that are in either Advanced Recording Format (ARF) or Webex Recording Format (WRF). An attacker could exploit this vulnerability by sending a user a malicious ARF or WRF file through a link or email attachment and persuading the user to open the file with the affected software on the local system. A successful exploit could allow the attacker to execute arbitrary code on the affected system with the privileges of the targeted user.

Cisco Adaptive Security Appliances (ASA) devices, when SMP is used, do not properly process X.509 certificates, which allows remote attackers to cause a denial of service (device crash) via a large volume of (1) SSL or (2) TLS traffic, aka Bug ID CSCuh19462.

Multiple vulnerabilities in Cisco SD-WAN products could allow an unauthenticated, remote attacker to execute denial of service (DoS) attacks against an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the Cisco Discovery Protocol implementation for Cisco Video Surveillance 8000 Series IP Cameras could allow an unauthenticated, adjacent attacker to cause an affected IP camera to reload. This vulnerability is due to missing checks when processing Cisco Discovery Protocol messages. An attacker could exploit this vulnerability by sending a malicious Cisco Discovery Protocol packet to an affected IP camera. A successful exploit could allow the attacker to cause the affected IP camera to reload unexpectedly, resulting in a denial of service (DoS) condition. Note: Cisco Discovery Protocol is a Layer 2 protocol. To exploit this vulnerability, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent).

Multiple vulnerabilities exist in the web-based management interface of Cisco Small Business RV Series Routers. A remote attacker could execute arbitrary commands or bypass authentication and upload files on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in Cisco SD-WAN products could allow an unauthenticated, remote attacker to execute denial of service (DoS) attacks against an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

Cisco Aironet 3600 access points allow remote attackers to cause a denial of service (memory corruption and device crash) by disrupting Cisco Wireless LAN Controller communication and consequently forcing many transitions from FlexConnect mode to Standalone mode, aka Bug ID CSCuh71210.

Multiple vulnerabilities in Cisco Webex Network Recording Player for Microsoft Windows and Cisco Webex Player for Microsoft Windows could allow an attacker to execute arbitrary code on an affected system. The vulnerabilities exist due to insufficient validation of certain elements with a Webex recording stored in either the Advanced Recording Format (ARF) or the Webex Recording Format (WRF). An attacker could exploit these vulnerabilities by sending a user a malicious ARF or WRF file through a link or email attachment and persuading the user to open the file with the affected software on the local system. A successful exploit could allow the attacker to execute arbitrary code on the affected system with the privileges of the targeted user.

The Web Administrator Interface on Cisco Wireless LAN Controller (WLC) devices allows remote authenticated users to cause a denial of service (device crash) by leveraging membership in the Full Manager managers group, Read Only managers group, or Lobby Ambassador managers group, and sending a request that (1) lacks a parameter value or (2) contains a malformed parameter value, aka Bug IDs CSCuh14313, CSCuh14159, CSCuh14368, and CSCuh14436.

Multiple vulnerabilities in Cisco SD-WAN products could allow an unauthenticated, remote attacker to execute attacks against an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

Cisco IOS XR allows local users to cause a denial of service (Silicon Packet Processor memory corruption, improper mutex handling, and device reload) by starting an outbound flood of large ICMP Echo Request packets and stopping this with a CTRL-C sequence, aka Bug ID CSCui60347.

Multiple vulnerabilities exist in the Link Layer Discovery Protocol (LLDP) implementation for Cisco Small Business RV Series Routers. An unauthenticated, adjacent attacker could execute arbitrary code or cause an affected router to leak system memory or reload. A memory leak or device reload would cause a denial of service (DoS) condition on an affected device. For more information about these vulnerabilities, see the Details section of this advisory. Note: LLDP is a Layer 2 protocol. To exploit these vulnerabilities, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent).