Multiple vulnerabilities in Cisco SD-WAN vEdge Software could allow an attacker to execute arbitrary code as the root user or cause a denial of service (DoS) condition on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

goform/websXMLAdminRequestCgi.cgi in Cisco Unified Videoconferencing (UVC) System 5110 and 5115, and possibly Unified Videoconferencing System 3545 and 5230, Unified Videoconferencing 3527 Primary Rate Interface (PRI) Gateway, Unified Videoconferencing 3522 Basic Rate Interfaces (BRI) Gateway, and Unified Videoconferencing 3515 Multipoint Control Unit (MCU), allows remote authenticated administrators to execute arbitrary commands via the username field, related to a "shell command injection vulnerability," aka Bug ID CSCti54059.

Unspecified vulnerability in Cisco Digital Media Manager (DMM) 5.0.x and 5.1.x allows remote authenticated users to gain privileges via unknown vectors, and consequently execute arbitrary code via a crafted web application, aka Bug ID CSCtc46008.

MeetingTime in Cisco Unified MeetingPlace 6 before MR5, and possibly 5, allows remote authenticated users to gain privileges via a modified authentication sequence, aka Bug ID CSCsv66530.

The RBAC implementation in Cisco ASA-CX Content-Aware Security software before 9.3.1.1(112) and Cisco Prime Security Manager (PRSM) software before 9.3.1.1(112) allows remote authenticated users to change arbitrary passwords via a crafted HTTP request, aka Bug ID CSCuo94842.

The Grapevine update process in Cisco Application Policy Infrastructure Controller Enterprise Module (APIC-EM) 1.0 allows remote authenticated users to execute arbitrary commands as root via a crafted upgrade parameter, aka Bug ID CSCux15507.

The CTIManager module in Cisco Unified Communications Manager (CM) 10.0(1), when single sign-on is enabled, does not properly validate Kerberos SSO tokens, which allows remote authenticated users to gain privileges and execute arbitrary commands via crafted token data, aka Bug ID CSCum95491.

Cisco Adaptive Security Appliance (ASA) Software 8.2 before 8.2(5.47), 8.4 before 8.4(7.5), 8.7 before 8.7(1.11), 9.0 before 9.0(3.10), and 9.1 before 9.1(3.4) allows remote authenticated users to gain privileges by leveraging level-0 ASDM access, aka Bug ID CSCuj33496.

Cisco Adaptive Security Appliance (ASA) Software 8.x before 8.2(5.48), 8.3 before 8.3(2.40), 8.4 before 8.4(7.9), 8.6 before 8.6(1.13), 9.0 before 9.0(4.1), and 9.1 before 9.1(4.3) does not properly process management-session information during privilege validation for SSL VPN portal connections, which allows remote authenticated users to gain privileges by establishing a Clientless SSL VPN session and entering crafted URLs, aka Bug ID CSCul70099.

The End User Safelist/Blocklist (aka SLBL) service in Cisco AsyncOS Software for Email Security Appliance (ESA) before 7.6.3-023 and 8.x before 8.0.1-023 and Cisco Content Security Management Appliance (SMA) before 7.9.1-110 and 8.x before 8.1.1-013 allows remote authenticated users to execute arbitrary code with root privileges via an FTP session that uploads a modified SLBL database file, aka Bug IDs CSCug79377 and CSCug80118.

A vulnerability in the web UI of Cisco IOS XE Software could allow an authenticated, remote attacker to execute arbitrary code with root privileges on the underlying operating system of an affected device. The vulnerability exists because the affected software improperly sanitizes values that are parsed from a specific configuration file. An attacker could exploit this vulnerability by tampering with a specific configuration file and then sending an API call. A successful exploit could allow the attacker to inject arbitrary code that would be executed on the underlying operating system of the affected device. To exploit this vulnerability, the attacker would need to have a privileged set of credentials to the device.

A vulnerability in Cisco IOx application hosting environment of Cisco IOS XE Software could allow an authenticated, remote attacker to inject commands into the underlying operating system as the root user. This vulnerability is due to incomplete validation of fields in the application packages loaded onto IOx. An attacker could exploit this vulnerability by creating a crafted application .tar file and loading it onto the device. A successful exploit could allow the attacker to perform command injection into the underlying operating system as the root user.

A vulnerability in the loading process of specific DLLs in Cisco Proximity Desktop for Windows could allow an authenticated, local attacker to load a malicious library. To exploit this vulnerability, the attacker must have valid credentials on the Windows system. This vulnerability is due to incorrect handling of directory paths at run time. An attacker could exploit this vulnerability by placing a malicious DLL file in a specific location on the targeted system. This file will execute when the vulnerable application launches. A successful exploit could allow the attacker to execute arbitrary code on the targeted system with the privileges of another user’s account.

The Baseboard Management Controller (BMC) in Cisco Unified Computing System (UCS) does not properly handle SSH escape sequences, which allows remote authenticated users to bypass an unspecified authentication step via SSH port forwarding, aka Bug ID CSCtg17656.

A vulnerability in the CLI of Cisco SD-WAN vManage Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system as the root user. The attacker must be authenticated on the affected system as a low-privileged user to exploit this vulnerability. This vulnerability exists because a file leveraged by a root user is executed when a low-privileged user runs specific commands on an affected system. An attacker could exploit this vulnerability by injecting arbitrary commands to a specific file as a lower-privileged user and then waiting until an admin user executes specific commands. The commands would then be executed on the device by the root user. A successful exploit could allow the attacker to escalate their privileges on the affected system from a low-privileged user to the root user.

Apache Log4j2 versions 2.0-beta7 through 2.17.0 (excluding security fix releases 2.3.2 and 2.12.4) are vulnerable to a remote code execution (RCE) attack when a configuration uses a JDBC Appender with a JNDI LDAP data source URI when an attacker has control of the target LDAP server. This issue is fixed by limiting JNDI data source names to the java protocol in Log4j2 versions 2.17.1, 2.12.4, and 2.3.2.

A vulnerability in the web services interface for remote access VPN features of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, but unprivileged, remote attacker to elevate privileges to level 15. This vulnerability is due to improper separation of authentication and authorization scopes. An attacker could exploit this vulnerability by sending crafted HTTPS messages to the web services interface of an affected device. A successful exploit could allow the attacker to gain privilege level 15 access to the web management interface of the device. This includes privilege level 15 access to the device using management tools like the Cisco Adaptive Security Device Manager (ASDM) or the Cisco Security Manager (CSM). Note: With Cisco FTD Software, the impact is lower than the CVSS score suggests because the affected web management interface allows for read access only.

Cisco IOS 12.2 through 12.4 and 15.0 through 15.2 and IOS XE 2.1.x through 2.6.x and 3.1.xS before 3.1.2S, 3.2.xS through 3.4.xS before 3.4.2S, 3.5.xS before 3.5.1S, and 3.1.xSG and 3.2.xSG before 3.2.2SG, when AAA authorization is enabled, allow remote authenticated users to bypass intended access restrictions and execute commands via a (1) HTTP or (2) HTTPS session, aka Bug ID CSCtr91106.

SQL injection vulnerability in Cisco Unified Communications Manager (aka CUCM, formerly CallManager) 6.x before 6.1(5)su2, 7.x before 7.1(5)su1, 8.0 before 8.0(3), and 8.5 before 8.5(1) allows remote authenticated users to execute arbitrary SQL commands via unspecified vectors, aka Bug ID CSCtg85647.

Buffer overflow in Cisco Adaptive Security Appliance (ASA) Software through 9.4.2.3 on ASA 5500, ASA 5500-X, ASA Services Module, ASA 1000V, ASAv, Firepower 9300 ASA Security Module, PIX, and FWSM devices allows remote authenticated users to execute arbitrary code via crafted IPv4 SNMP packets, aka Bug ID CSCva92151 or EXTRABACON.

Multiple vulnerabilities in the REST API of Cisco UCS Director and Cisco UCS Director Express for Big Data may allow a remote attacker to bypass authentication or conduct directory traversal attacks on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

Unspecified vulnerability in the server side of the Secure Copy (SCP) implementation in Cisco 12.2-based IOS allows remote authenticated users to read, write or overwrite any file on the device's filesystem via unknown vectors.

The web framework in Cisco Prime Collaboration Assurance before 10.5.1.53684-1 allows remote authenticated users to bypass intended login-session read restrictions, and impersonate administrators of arbitrary tenant domains, by discovering a session identifier and constructing a crafted URL, aka Bug IDs CSCus88343 and CSCus88334.

A vulnerability in the memory buffer of Cisco Wireless LAN Controller (WLC) AireOS Software could allow an unauthenticated, adjacent attacker to cause memory leaks that could eventually lead to a device reboot. This vulnerability is due to memory leaks caused by multiple clients connecting under specific conditions. An attacker could exploit this vulnerability by causing multiple wireless clients to attempt to connect to an access point (AP) on an affected device. A successful exploit could allow the attacker to cause the affected device to reboot after a significant amount of time, resulting in a denial of service (DoS) condition.

Multiple buffer overflows in the Cisco WebEx Recording Format (WRF) and Advanced Recording Format (ARF) Players T27LB before SP21 EP3 and T27LC before SP22 allow remote attackers to cause a denial of service (application crash) or possibly execute arbitrary code via a crafted (1) .wrf or (2) .arf file, a different vulnerability than CVE-2010-3041, CVE-2010-3043, and CVE-2010-3044.

Multiple stack-based buffer overflows in the Cisco WebEx Recording Format (WRF) and Advanced Recording Format (ARF) Players T27LB before SP21 EP3 and T27LC before SP22 allow remote attackers to execute arbitrary code via a crafted (1) .wrf or (2) .arf file, related to use of a function pointer in a callback mechanism.

Multiple buffer overflows in the authentication functionality in the web-server module in Cisco CiscoWorks Common Services before 4.0 allow remote attackers to execute arbitrary code via a session on TCP port (1) 443 or (2) 1741, aka Bug ID CSCti41352.

Buffer overflow in the Overlay Transport Virtualization (OTV) GRE feature in Cisco NX-OS 5.0 through 7.3 on Nexus 7000 and 7700 devices allows remote attackers to execute arbitrary code via long parameters in a packet header, aka Bug ID CSCuy95701.

Buffer overflow on Cisco Adaptive Security Appliances (ASA) 5500 series devices with software 1.6.x; Cisco TelePresence Multipoint Switch (CTMS) devices with software 1.0.x, 1.1.x, 1.5.x, and 1.6.x; Cisco TelePresence endpoint devices with software 1.2.x through 1.6.x; and Cisco TelePresence Manager 1.2.x, 1.3.x, 1.4.x, 1.5.x, and 1.6.2 allows remote attackers to execute arbitrary code via a crafted Cisco Discovery Protocol packet, aka Bug IDs CSCtd75769, CSCtd75766, CSCtd75754, and CSCtd75761.

A vulnerability in the cache server within Cisco Videoscape Distribution Suite (VDS) for Television 3.2(5)ES1 could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on a targeted appliance. The vulnerability is due to excessive mapped connections exhausting the allotted resources within the system. An attacker could exploit this vulnerability by sending large amounts of inbound traffic to a device with the intention of overloading certain resources. A successful exploit could cause the device to reload, resulting in a DoS condition. Cisco Bug IDs: CSCvc39260.

Cisco IOS 15.0(2)SG5, 15.1(2)SG3, 15.2(1)E, 15.3(3)S, and 15.4(1.13)S allows remote attackers to cause a denial of service (device crash) via a crafted LLDP packet, aka Bug ID CSCun66735.

Buffer overflow in the web-based management interface on Cisco RV110W devices with firmware before 1.2.1.7, RV130W devices with firmware before 1.0.3.16, and RV215W devices with firmware before 1.3.0.8 allows remote authenticated users to cause a denial of service (device reload) via crafted configuration commands in an HTTP request, aka Bug ID CSCux82523.

Buffer overflow in Cisco CiscoWorks Internetwork Performance Monitor (IPM) 2.6 and earlier on Windows, as distributed in CiscoWorks LAN Management Solution (LMS), allows remote attackers to execute arbitrary code via a malformed getProcessName CORBA General Inter-ORB Protocol (GIOP) request, related to a "third-party component," aka Bug ID CSCsv62350.

A vulnerability in the web application for Cisco IP Phones could allow an unauthenticated, remote attacker to execute code with root privileges or cause a reload of an affected IP phone, resulting in a denial of service (DoS) condition. The vulnerability exists because the affected software fails to check the bounds of input data. An attacker could exploit this vulnerability by sending a crafted HTTP request to the web server of a targeted device. A successful exploit could allow the attacker to remotely execute code with root privileges or cause a reload of an affected IP phone, resulting in a DoS condition.

The General Packet Radio Switching Tunneling Protocol 1 (aka GTPv1) implementation on Cisco ASR 5000 Packet Data Network Gateway devices before 19.4 allows remote attackers to cause a denial of service (Session Manager process restart) via a crafted GTPv1 packet, aka Bug ID CSCuz46198.

Cisco IOS 15.2(1)T1.11 and 15.2(2)TST allows remote attackers to cause a denial of service (device crash) via a crafted LLDP packet, aka Bug ID CSCun63132.

libclamav in ClamAV (aka Clam AntiVirus), as used in Advanced Malware Protection (AMP) on Cisco Email Security Appliance (ESA) devices before 9.7.0-125 and Web Security Appliance (WSA) devices before 9.0.1-135 and 9.1.x before 9.1.1-041, allows remote attackers to cause a denial of service (AMP process restart) via a crafted document, aka Bug IDs CSCuv78533 and CSCuw60503.

Heap-based buffer overflow in Cisco Unified Computing System (UCS) Platform Emulator 2.5(2)TS4, 3.0(2c)A, and 3.0(2c)TS9 allows local users to gain privileges via crafted libclimeta.so filename arguments, aka Bug ID CSCux68837.

The API in Cisco Prime Infrastructure 1.2 through 3.0 and Evolved Programmable Network Manager (EPNM) 1.2 allows remote attackers to execute arbitrary code or obtain sensitive management information via a crafted HTTP request, as demonstrated by discovering managed-device credentials, aka Bug ID CSCuy10231.

Buffer overflow in the web-based management interface on Cisco RV110W devices with firmware through 1.2.1.4, RV130W devices with firmware through 1.0.2.7, and RV215W devices with firmware through 1.3.0.7 allows remote authenticated users to cause a denial of service (device reload) via a crafted HTTP request, aka Bug ID CSCux86669.

The HTTPS inspection engine in the Content Security and Control Security Services Module (CSC-SSM) 6.6 before 6.6.1164.0 for Cisco ASA 5500 devices allows remote attackers to cause a denial of service (memory consumption or device reload) via a flood of HTTPS packets, aka Bug ID CSCue76147.

A vulnerability in the bidirectional forwarding detection (BFD) hardware offload feature of Cisco IOS XR Software for Cisco ASR 9000 Series Aggregation Services Routers, ASR 9902 Compact High-Performance Routers, and ASR 9903 Compact High-Performance Routers could allow an unauthenticated, remote attacker to cause a line card to reset, resulting in a denial of service (DoS) condition. This vulnerability is due to the incorrect handling of malformed BFD packets that are received on line cards where the BFD hardware offload feature is enabled. An attacker could exploit this vulnerability by sending a crafted IPv4 BFD packet to an affected device. A successful exploit could allow the attacker to cause line card exceptions or a hard reset, resulting in loss of traffic over that line card while the line card reloads.

Cisco Prime Infrastructure 2.2, 3.0, and 3.1(0.0) allows remote authenticated users to read arbitrary files or cause a denial of service via an XML document containing an external entity declaration in conjunction with an entity reference, related to an XML External Entity (XXE) issue, aka Bug ID CSCuw81497.

Cisco Unified Wireless Network (UWN) Solution 7.x before 7.0.98.0 on 5508 series controllers allows remote attackers to cause a denial of service (buffer leak and device crash) via ARP requests that trigger an ARP storm, aka Bug ID CSCte43508.

Buffer overflow in the IKEv1 and IKEv2 implementations in Cisco ASA Software before 8.4(7.30), 8.7 before 8.7(1.18), 9.0 before 9.0(4.38), 9.1 before 9.1(7), 9.2 before 9.2(4.5), 9.3 before 9.3(3.7), 9.4 before 9.4(2.4), and 9.5 before 9.5(2.2) on ASA 5500 devices, ASA 5500-X devices, ASA Services Module for Cisco Catalyst 6500 and Cisco 7600 devices, ASA 1000V devices, Adaptive Security Virtual Appliance (aka ASAv), Firepower 9300 ASA Security Module, and ISA 3000 devices allows remote attackers to execute arbitrary code or cause a denial of service (device reload) via crafted UDP packets, aka Bug IDs CSCux29978 and CSCux42019.

Buffer overflow in the login implementation in the Extension Mobility feature in the Unified Communications Manager Express (CME) component in Cisco IOS 12.4XW, 12.4XY, 12.4XZ, and 12.4YA allows remote attackers to execute arbitrary code or cause a denial of service via crafted HTTP requests, aka Bug ID CSCsq58779.

Cisco Unified Wireless Network (UWN) Solution 7.x before 7.0.98.0 on 5508 series controllers allows remote attackers to cause a denial of service (pbuf exhaustion and device crash) via fragmented traffic, aka Bug ID CSCtd26794.

Buffer overflow in the web server on Cisco DPC2203 and EPC2203 devices with firmware r1_customer_image allows remote attackers to execute arbitrary code via a crafted HTTP request, aka Bug ID CSCuv05935.