PrestaShop is a fully scalable open source e-commerce solution. In PrestaShop before version 1.7.2 the soft logout system is not complete and an attacker is able to foreign request and executes customer commands. The problem is fixed in 1.7.7.2

The default configuration of Cisco Small Business IP phones SPA 300 7.5.5 and SPA 500 7.5.5 does not properly support authentication, which allows remote attackers to read audio-stream data or originate telephone calls via a crafted XML request, aka Bug ID CSCuo52482.

The make_password function in ipsclass.php in Invision Power Board (IPB) 2.1.4 uses random data generated from partially predictable seeds to create the authentication code that is sent by e-mail to a user with a lost password, which might make it easier for remote attackers to guess the code and change the password for an IPB account, possibly involving millions of requests.

A vulnerability in the Quality of Voice Reporting (QOVR) service of Cisco Prime Collaboration Assurance (PCA) Software could allow an unauthenticated, remote attacker to access the system as a valid user. The vulnerability is due to insufficient authentication controls. An attacker could exploit this vulnerability by connecting to the QOVR service with a valid username. A successful exploit could allow the attacker to perform actions with the privileges of the user that is used for access. This vulnerability affects Cisco PCA Software Releases prior to 12.1 SP2.

An issue was discovered on Zyxel GS1900 devices with firmware before 2.50(AAHH.0)C0. Through an undocumented sequence of keypresses, undocumented functionality is triggered. A diagnostics shell is triggered via CTRL-ALT-t, which prompts for the password returned by fds_sys_passDebugPasswd_ret(). The firmware contains access control checks that determine if remote users are allowed to access this functionality. The function that performs this check (fds_sys_remoteDebugEnable_ret in libfds.so) always return TRUE with no actual checks performed. The diagnostics menu allows for reading/writing arbitrary registers and various other configuration parameters which are believed to be related to the network interface chips.

A vulnerability was found in Moodle versions 3.7 before 3.7.3, 3.6 before 3.6.7, 3.5 before 3.5.9 and earlier. OAuth 2 providers who do not verify users' email address changes require additional verification during sign-up to reduce the risk of account compromise.

All Samba versions 4.x.x before 4.9.17, 4.10.x before 4.10.11 and 4.11.x before 4.11.3 have an issue, where the S4U (MS-SFU) Kerberos delegation model includes a feature allowing for a subset of clients to be opted out of constrained delegation in any way, either S4U2Self or regular Kerberos authentication, by forcing all tickets for these clients to be non-forwardable. In AD this is implemented by a user attribute delegation_not_allowed (aka not-delegated), which translates to disallow-forwardable. However the Samba AD DC does not do that for S4U2Self and does set the forwardable flag even if the impersonated client has the not-delegated flag set.

A vulnerability in the web-based management interface of Cisco Enterprise NFV Infrastructure Software (NFVIS) could allow an unauthenticated, remote attacker to bypass authentication and get limited access to the web-based management interface. The vulnerability is due to an incorrect implementation of authentication in the web-based management interface. An attacker could exploit this vulnerability by sending a crafted authentication request to the web-based management interface on an affected system. A successful exploit could allow the attacker to view limited configuration details and potentially upload a virtual machine image.

fileadmin.php in Libra File Manager (aka Libra PHP File Manager) 1.18 and earlier allows remote attackers to bypass authentication, and read arbitrary files, modify arbitrary files, and list arbitrary directories, by inserting certain user and isadmin parameters in the query string.

constants.inc in EZWebAlbum 1.0 allows remote attackers to bypass authentication and gain administrator privileges by setting the photoalbumadmin cookie, as demonstrated via addpage.php.

octobercms in a CMS platform based on the Laravel PHP Framework. In affected versions of the october/system package an attacker can request an account password reset and then gain access to the account using a specially crafted request. The issue has been patched in Build 472 and v1.1.5.

IKEv2 in strongSwan 4.0.7 before 5.1.3 allows remote attackers to bypass authentication by rekeying an IKE_SA during (1) initiation or (2) re-authentication, which triggers the IKE_SA state to be set to established.

Mitake smart stock selection system contains a broken authentication vulnerability. By manipulating the parameters in the URL, remote attackers can gain the privileged permissions to access transaction record, and fraudulent trading without login.

Affected versions of Atlassian Jira Server and Data Center allow remote attackers to evade behind-the-firewall protection of app-linked resources via a Broken Authentication vulnerability in the `makeRequest` gadget resource. The affected versions are before version 8.13.3, and from version 8.14.0 before 8.14.1.

A Missing Authentication in Critical Function in Bosch IP cameras allows an unauthenticated remote attacker to extract sensitive information or change settings of the camera by sending crafted requests to the device. Only devices of the CPP6, CPP7 and CPP7.3 family with firmware 7.70, 7.72, and 7.80 prior to B128 are affected by this vulnerability. Versions 7.62 or lower and INTEOX cameras are not affected.

VMware Carbon Black Cloud Workload appliance 1.0.0 and 1.01 has an authentication bypass vulnerability that may allow a malicious actor with network access to the administrative interface of the VMware Carbon Black Cloud Workload appliance to obtain a valid authentication token. Successful exploitation of this issue would result in the attacker being able to view and alter administrative configuration settings.

CRIXP OpenCRX version 4.30 and 5.0-20200717 and prior suffers from an unverified password change vulnerability. An attacker who is able to connect to the affected OpenCRX instance can change the password of any user, including admin-Standard, to any chosen value. This issue was resolved in version 5.0-20200904, released September 4, 2020.

An exploitable authentication bypass vulnerability exists in the ESPON Web Control functionality of Epson EB-1470Ui MAIN: 98009273ESWWV107 MAIN2: 8X7325WWV303. A specially crafted series of HTTP requests can cause authentication bypass resulting in information disclosure. An attacker can send an HTTP request to trigger this vulnerability.

Schneider Electric StruxureWare SCADA Expert ClearSCADA 2010 R3 through 2014 R1 allows remote attackers to read database records by leveraging access to the guest account.

A Two-Factor Authentication Bypass Vulnerability exists in BS-Client Private Client 2.4 and 2.5 via an XML request that neglects the use of ADPswID and AD parameters, which could let a malicious user access privileged function.

The I-O DATA TS-WLCAM camera with firmware 1.06 and earlier, TS-WLCAM/V camera with firmware 1.06 and earlier, TS-WPTCAM camera with firmware 1.08 and earlier, TS-PTCAM camera with firmware 1.08 and earlier, TS-PTCAM/POE camera with firmware 1.08 and earlier, and TS-WLC2 camera with firmware 1.02 and earlier allow remote attackers to bypass authentication, and consequently obtain sensitive credential and configuration data, via unspecified vectors.

The default configuration in cURL and libcurl 7.10.6 before 7.36.0 re-uses (1) SCP, (2) SFTP, (3) POP3, (4) POP3S, (5) IMAP, (6) IMAPS, (7) SMTP, (8) SMTPS, (9) LDAP, and (10) LDAPS connections, which might allow context-dependent attackers to connect as other users via a request, a similar issue to CVE-2014-0015.

The WAP interface in Trihedral VTScada (formerly VTS) 8.x through 11.x before 11.2.02 allows remote attackers to bypass authentication and read arbitrary files via unspecified vectors.

admin/management.html in PineApp Mail-SeCure allows remote attackers to bypass authentication and perform a sys_usermng operation via the it parameter.

WordPress Portable phpMyAdmin Plugin has an authentication bypass vulnerability

The master external node classification script in Puppet Enterprise before 3.2.0 does not verify the identity of consoles, which allows remote attackers to create arbitrary classifications on the master by spoofing a console.

WordPress Portable phpMyAdmin Plugin 1.4.1 has Multiple Security Bypass Vulnerabilities

An Incorrect Access Control vulnerability has been identified in Citrix XenMobile Server 10.8.0 before Rolling Patch 6 and 10.9.0 before Rolling Patch 3. An attacker can impersonate and take actions on behalf of any Mobile Application Management (MAM) enrolled device.

An issue was discovered on KONE Group Controller (KGC) devices before 4.6.5. FTP does not require authentication or authorization, aka KONE-03.

YzmCMS v6.3 is affected by broken access control. Without login, unauthorized access to the user's personal home page can be realized. It is necessary to judge the user's login status before accessing the personal home page, but the vulnerability can access other users' home pages through the non login status because real authentication is not carried out.

Authentication bypass vulnerability in portal/account/register.php in versions of OpenEMR before 5.0.1.4 allows a remote attacker to access (1) portal/add_edit_event_user.php, (2) portal/find_appt_popup_user.php, (3) portal/get_allergies.php, (4) portal/get_amendments.php, (5) portal/get_lab_results.php, (6) portal/get_medications.php, (7) portal/get_patient_documents.php, (8) portal/get_problems.php, (9) portal/get_profile.php, (10) portal/portal_payment.php, (11) portal/messaging/messages.php, (12) portal/messaging/secure_chat.php, (13) portal/report/pat_ledger.php, (14) portal/report/portal_custom_report.php, or (15) portal/report/portal_patient_report.php without authenticating as a patient.

A vulnerability was found in libssh's server-side state machine before versions 0.7.6 and 0.8.4. A malicious client could create channels without first performing authentication, resulting in unauthorized access.

Use of Password Hash Instead of Password for Authentication vulnerability in Mitsubishi Electric MELSEC iQ-F series FX5U(C) CPU all versions, Mitsubishi Electric MELSEC iQ-F series FX5UJ CPU all versions, Mitsubishi Electric MELSEC iQ-R series R00/01/02CPU all versions, Mitsubishi Electric MELSEC iQ-R series R04/08/16/32/120(EN)CPU all versions, Mitsubishi Electric MELSEC iQ-R series R08/16/32/120SFCPU all versions, Mitsubishi Electric MELSEC iQ-R series R08/16/32/120PCPU all versions, Mitsubishi Electric MELSEC iQ-R series R08/16/32/120PSFCPU all versions, Mitsubishi Electric MELSEC iQ-R series R16/32/64MTCPU all versions, Mitsubishi Electric MELSEC iQ-R series RJ71C24(-R2/R4) all versions, Mitsubishi Electric MELSEC iQ-R series RJ71EN71 all versions, Mitsubishi Electric MELSEC iQ-R series RJ71GF11-T2 all versions, Mitsubishi Electric MELSEC iQ-R series RJ71GP21(S)-SX all versions, Mitsubishi Electric MELSEC iQ-R series RJ72GF15-T2 all versions, Mitsubishi Electric MELSEC Q series Q03UDECPU all versions, Mitsubishi Electric MELSEC Q series Q04/06/10/13/20/26/50/100UDEHCPU all versions, Mitsubishi Electric MELSEC Q series Q03/04/06/13/26UDVCPU all versions, Mitsubishi Electric MELSEC Q series Q04/06/13/26UDPVCPU all versions, Mitsubishi Electric MELSEC Q series QJ71C24N(-R2/R4) all versions, Mitsubishi Electric MELSEC Q series QJ71E71-100 all versions, Mitsubishi Electric MELSEC L series L02/06/26CPU(-P) all versions, Mitsubishi Electric MELSEC L series L26CPU-(P)BT all versions, Mitsubishi Electric MELSEC L series LJ71C24(-R2) all versions, Mitsubishi Electric MELSEC L series LJ71E71-100 all versions and Mitsubishi Electric MELSEC L series LJ72GF15-T2 all versions allows a remote unauthenticated attacker to disclose or tamper with the information in the product by using an eavesdropped password hash.

A vulnerability in the RADIUS authentication module of Cisco Policy Suite could allow an unauthenticated, remote attacker to be authorized as a subscriber without providing a valid password; however, the attacker must provide a valid username. The vulnerability is due to incorrect RADIUS user credential validation. An attacker could exploit this vulnerability by attempting to access a Cisco Policy Suite domain configured with RADIUS authentication. An exploit could allow the attacker to be authorized as a subscriber without providing a valid password. This vulnerability affects the Cisco Policy Suite application running a release prior to 13.1.0 with Hotfix Patch 1 when RADIUS authentication is configured for a domain. Cisco Policy Suite Release 14.0.0 is also affected, as it includes vulnerable code, but RADIUS authentication is not officially supported in Cisco Policy Suite Releases 14.0.0 and later. Cisco Bug IDs: CSCvg40124.

Authentication Bypass vulnerability in Accellion kiteworks before 2017.01.00 allows remote attackers to execute certain API calls on behalf of a web user using a gathered token via a POST request to /oauth/token.

A vulnerability in the Ultra Automation Service (UAS) of the Cisco Ultra Services Framework could allow an unauthenticated, remote attacker to gain unauthorized access to a targeted device. The vulnerability is due to an insecure default configuration of the Apache ZooKeeper service used by the affected software. An attacker could exploit this vulnerability by accessing the affected device through the orchestrator network. An exploit could allow the attacker to gain access to ZooKeeper data nodes (znodes) and influence the behavior of the system's high-availability feature. This vulnerability affects all releases of Cisco Ultra Services Framework UAS prior to Releases 5.0.3 and 5.1. Cisco Bug IDs: CSCvd29395.

An Authentication Bypass vulnerability in Cisco WebEx Meetings Server could allow an unauthenticated, remote attacker to access limited meeting information on the Cisco WebEx Meetings Server. More Information: CSCvd50728. Known Affected Releases: 2.6 2.7 2.8 CWMS-2.5MR1 Orion1.1.2.patch T29_orion_merge.

An authentication bypass vulnerability exists in the cgiserver.cgi Login functionality of reolink RLC-410W v3.0.0.136_20121102. A specially-crafted HTTP request can lead to authentication bypass. An attacker can send an HTTP request to trigger this vulnerability.

A flaw was found in 389-ds-base. If an asterisk is imported as password hashes, either accidentally or maliciously, then instead of being inactive, any password will successfully match during authentication. This flaw allows an attacker to successfully authenticate as a user whose password was disabled.

QNAP NAS application Media Streaming add-on version 421.1.0.2, 430.1.2.0, and earlier does not authenticate requests properly. Successful exploitation could lead to change of the Media Streaming settings, and leakage of sensitive information of the QNAP NAS.

An issue was discovered in Advantech WebAccess Version 8.1. By accessing a specific uniform resource locator (URL) on the web server, a malicious user is able to access pages unrestricted (AUTHENTICATION BYPASS).

Envoy is a cloud-native high-performance edge/middle/service proxy. In Envoy version 1.17.0 an attacker can bypass authentication by presenting a JWT token with an issuer that is not in the provider list when Envoy's JWT Authentication filter is configured with the `allow_missing` requirement under `requires_any` due to a mistake in implementation. Envoy's JWT Authentication filter can be configured with the `allow_missing` requirement that will be satisfied if JWT is missing (JwtMissed error) and fail if JWT is presented or invalid. Due to a mistake in implementation, a JwtUnknownIssuer error was mistakenly converted to JwtMissed when `requires_any` was configured. So if `allow_missing` was configured under `requires_any`, an attacker can bypass authentication by presenting a JWT token with an issuer that is not in the provider list. Integrity may be impacted depending on configuration if the JWT token is used to protect against writes or modifications. This regression was introduced on 2020/11/12 in PR 13839 which fixed handling `allow_missing` under RequiresAny in a JwtRequirement (see issue 13458). The AnyVerifier aggregates the children verifiers' results into a final status where JwtMissing is the default error. However, a JwtUnknownIssuer was mistakenly treated the same as a JwtMissing error and the resulting final aggregation was the default JwtMissing. As a result, `allow_missing` would allow a JWT token with an unknown issuer status. This is fixed in version 1.17.1 by PR 15194. The fix works by preferring JwtUnknownIssuer over a JwtMissing error, fixing the accidental conversion and bypass with `allow_missing`. A user could detect whether a bypass occurred if they have Envoy logs enabled with debug verbosity. Users can enable component level debug logs for JWT. The JWT filter logs will indicate that there is a request with a JWT token and a failure that the JWT token is missing.