The UDP inspection engine on Cisco Adaptive Security Appliances (ASA) 5500 series devices, and the ASA Services Module (ASASM) in Cisco Catalyst 6500 series devices, with software 8.0 before 8.0(5.25), 8.1 before 8.1(2.50), 8.2 before 8.2(5.5), 8.3 before 8.3(2.22), 8.4 before 8.4(2.1), and 8.5 before 8.5(1.2) does not properly handle flows, which allows remote attackers to cause a denial of service (device reload) via a crafted series of (1) IPv4 or (2) IPv6 UDP packets, aka Bug ID CSCtq10441.

Cisco Adaptive Security Appliances (ASA) 5500 series devices, and the ASA Services Module (ASASM) in Cisco Catalyst 6500 series devices, with software 7.0 through 7.2 before 7.2(5.7), 8.0 before 8.0(5.27), 8.1 before 8.1(2.53), 8.2 before 8.2(5.8), 8.3 before 8.3(2.25), 8.4 before 8.4(2.5), and 8.5 before 8.5(1.2) and the Firewall Services Module (FWSM) 3.1 and 3.2 before 3.2(23) and 4.0 and 4.1 before 4.1(8) in Cisco Catalyst 6500 series devices, when multicast routing is enabled, allow remote attackers to cause a denial of service (device reload) via a crafted IPv4 PIM message, aka Bug IDs CSCtr47517 and CSCtu97367.

Multiple vulnerabilities in the CLI of Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to execute arbitrary commands with root privileges. For more information about these vulnerabilities, see the Details section of this advisory.

The Cisco Security Service in Cisco AnyConnect Secure Mobility Client (aka AnyConnect VPN Client) does not properly verify files, which allows local users to gain privileges via unspecified vectors, aka Bug ID CSCud14153.

Multiple vulnerabilities in the Application Level Gateway (ALG) for the Network Address Translation (NAT) feature of Cisco Adaptive Security Appliance (ASA) Software and Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass the ALG and open unauthorized connections with a host located behind the ALG. For more information about these vulnerabilities, see the Details section of this advisory. Note: These vulnerabilities have been publicly discussed as NAT Slipstreaming.

A vulnerability in Cisco Firepower System Software could allow an unauthenticated, remote attacker to maliciously bypass the appliance's ability to block certain web content, aka a URL Bypass. More Information: CSCvb93980. Known Affected Releases: 5.3.0 5.4.0 6.0.0 6.0.1 6.1.0.

Multiple vulnerabilities in the Application Level Gateway (ALG) for the Network Address Translation (NAT) feature of Cisco Adaptive Security Appliance (ASA) Software and Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass the ALG and open unauthorized connections with a host located behind the ALG. For more information about these vulnerabilities, see the Details section of this advisory. Note: These vulnerabilities have been publicly discussed as NAT Slipstreaming.

The command-line interface in Cisco Secure Access Control System (ACS), Identity Services Engine Software, Context Directory Agent, Application Networking Manager (ANM), Prime Network Control System, Prime LAN Management Solution (LMS), Prime Collaboration, Unified Provisioning Manager, Network Services Manager, Prime Data Center Network Manager (DCNM), and Quad does not properly validate input, which allows local users to obtain root privileges via unspecified vectors, aka Bug IDs CSCug29384, CSCug13866, CSCug29400, CSCug29406, CSCug29411, CSCug29413, CSCug29416, CSCug29418, CSCug29422, CSCug29425, and CSCug29426, a different issue than CVE-2013-1125.

A vulnerability in the implementation of the direct authentication feature in Cisco Adaptive Security Appliance (ASA) Software could allow an unauthenticated, remote attacker to cause an affected device to unexpectedly reload, resulting in a denial of service (DoS) condition. The vulnerability is due to incomplete input validation of the HTTP header. An attacker could exploit this vulnerability by sending a crafted HTTP request to the local IP address of an affected device. A successful exploit could allow the attacker to cause the affected device to reload. This vulnerability affects Cisco Adaptive Security Appliance (ASA) Software that is running on the following Cisco products: ASA 5500 Series Adaptive Security Appliances, ASA 5500-X Series Next-Generation Firewalls, ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, ASA 1000V Cloud Firewall, Adaptive Security Virtual Appliance (ASAv), Firepower 4110 Security Appliance, Firepower 9300 ASA Security Module, ISA 3000 Industrial Security Appliance. Cisco Bug IDs: CSCvd59063.

A vulnerability in the software-based SSL/TLS message handler of Cisco Adaptive Security Appliance (ASA) Software and Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. This vulnerability is due to insufficient validation of SSL/TLS messages when the device performs software-based SSL/TLS decryption. An attacker could exploit this vulnerability by sending a crafted SSL/TLS message to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. Note: Datagram TLS (DTLS) messages cannot be used to exploit this vulnerability.

A vulnerability in the Border Gateway Protocol (BGP) over an Ethernet Virtual Private Network (EVPN) for Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause the device to reload, resulting in a denial of service (DoS) condition, or potentially corrupt the BGP routing table, which could result in network instability. The vulnerability exists due to changes in the implementation of the BGP MPLS-Based Ethernet VPN RFC (RFC 7432) draft between IOS XE software releases. When the BGP Inclusive Multicast Ethernet Tag Route or BGP EVPN MAC/IP Advertisement Route update packet is received, it could be possible that the IP address length field is miscalculated. An attacker could exploit this vulnerability by sending a crafted BGP packet to an affected device after the BGP session was established. An exploit could allow the attacker to cause the affected device to reload or corrupt the BGP routing table; either outcome would result in a DoS. The vulnerability may be triggered when the router receives a crafted BGP message from a peer on an existing BGP session. This vulnerability affects all releases of Cisco IOS XE Software prior to software release 16.3 that support BGP EVPN configurations. If the device is not configured for EVPN, it is not vulnerable. Cisco Bug IDs: CSCui67191, CSCvg52875.

A vulnerability in the Stream Control Transmission Protocol (SCTP) decoder of the Cisco NetFlow Generation Appliance (NGA) with software before 1.1(1a) could allow an unauthenticated, remote attacker to cause the device to hang or unexpectedly reload, causing a denial of service (DoS) condition. The vulnerability is due to incomplete validation of SCTP packets being monitored on the NGA data ports. An attacker could exploit this vulnerability by sending malformed SCTP packets on a network that is monitored by an NGA data port. SCTP packets addressed to the IP address of the NGA itself will not trigger this vulnerability. An exploit could allow the attacker to cause the appliance to become unresponsive or reload, causing a DoS condition. User interaction could be needed to recover the device using the reboot command from the CLI. The following Cisco NetFlow Generation Appliances are vulnerable: NGA 3140, NGA 3240, NGA 3340. Cisco Bug IDs: CSCvc83320.

The traffic engineering (TE) processing subsystem in Cisco IOS XR allows remote attackers to cause a denial of service (process restart) via crafted TE packets, aka Bug ID CSCue04000.

The JAR files on Cisco Device Manager for Cisco MDS 9000 devices before 5.2.8, and Cisco Device Manager for Cisco Nexus 5000 devices, allow remote attackers to execute arbitrary commands on Windows client machines via a crafted element-manager.jnlp file, aka Bug IDs CSCty17417 and CSCty10802.

The Connection Manager in Cisco Jabber Extensible Communications Platform (aka Jabber XCP) does not properly validate login data, which allows remote attackers to cause a denial of service (service crash) by sending a series of malformed login packets, aka Bug ID CSCts76762.

Cisco Carrier Routing System 3.9.1 allows remote attackers to cause a denial of service (Metro subsystem crash) via a fragmented GRE packet, aka Bug ID CSCts14887.

Cisco Universal Broadband (aka uBR) 10000 series routers, when an IPv4/IPv6 dual-stack modem is used, allow remote attackers to cause a denial of service (routing-engine reload) via unspecified changes to IP address assignments, aka Bug ID CSCue15313.

A vulnerability in the Client Manager Server of Cisco Workload Automation and Cisco Tidal Enterprise Scheduler could allow an unauthenticated, remote attacker to retrieve any file from the Client Manager Server. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending a crafted URL to the Client Manager Server. An exploit could allow the attacker to retrieve any file from the Cisco Workload Automation or Cisco Tidal Enterprise Scheduler Client Manager Server. This vulnerability affects the following products: Cisco Tidal Enterprise Scheduler Client Manager Server releases 6.2.1.435 and later, Cisco Workload Automation Client Manager Server releases 6.3.0.116 and later. Cisco Bug IDs: CSCvc90789.

The log viewer in Cisco Unified Customer Voice Portal (CVP) Software before 9.0.1 ES 11 does not properly validate an unspecified parameter, which allows remote attackers to read arbitrary files via a crafted (1) HTTP or (2) HTTPS request, aka Bug ID CSCub38372.

The PPP implementation in Cisco IOS 12.2 and 15.0 through 15.2, when Point-to-Point Termination and Aggregation (PTA) and L2TP are used, allows remote attackers to cause a denial of service (device crash) via crafted network traffic, aka Bug ID CSCtf71673.

A vulnerability in the Unidirectional Link Detection (UDLD) feature of Cisco FXOS Software, Cisco IOS Software, Cisco IOS XE Software, Cisco IOS XR Software, and Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to cause an affected device to reload. This vulnerability is due to improper input validation of the UDLD packets. An attacker could exploit this vulnerability by sending specifically crafted UDLD packets to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition. Note: The UDLD feature is disabled by default, and the conditions to exploit this vulnerability are strict. An attacker must have full control of a directly connected device. On Cisco IOS XR devices, the impact is limited to the reload of the UDLD process.

A vulnerability in the Cisco application-hosting framework (CAF) component of the Cisco IOx application environment could allow an authenticated, remote attacker to write or modify arbitrary files in the virtual instance running on the affected device. The vulnerability is due to insufficient input validation of user-supplied application packages. An attacker who can upload a malicious package within Cisco IOx could exploit the vulnerability to modify arbitrary files. The impacts of a successful exploit are limited to the scope of the virtual instance and do not impact the router that is hosting Cisco IOx. Cisco IOx Releases 1.0.0.0 and 1.1.0.0 are vulnerable. Cisco Bug IDs: CSCuy52317.

Cisco IOS 15.0 and 15.1 and IOS XE 3.x do not properly handle the "set mpls experimental imposition" command, which allows remote attackers to cause a denial of service (device crash) via network traffic that triggers (1) fragmentation or (2) reassembly, aka Bug ID CSCtr56576.

The DSP card on Cisco TelePresence MCU 4500 and 4501 devices before 4.3(2.30), TelePresence MCU MSE 8510 devices before 4.3(2.30), and TelePresence Server before 2.3(1.55) does not properly validate H.264 data, which allows remote attackers to cause a denial of service (device reload) via crafted RTP packets in a (1) SIP session or (2) H.323 session, aka Bug IDs CSCuc11328 and CSCub05448.

Cisco Unified Contact Center Express (aka CCX) 8.0 and 8.5 allows remote attackers to cause a denial of service via network traffic, as demonstrated by an SEC-BE-STABLE test case, aka Bug ID CSCth33834.

Cisco NX-OS on the Nexus 7000, when a certain Overlay Transport Virtualization (OTV) configuration is used, allows remote attackers to cause a denial of service (M1-Series module reload) via crafted packets, aka Bug ID CSCud15673.

The HTTP client in Cisco IOS 12.4 and 15.0 allows user-assisted remote attackers to cause a denial of service (device crash) via a malformed HTTP response to a request for service installation, aka Bug ID CSCts12249.

The cat6000-dot1x component in Cisco IOS 12.2 before 12.2(33)SXI7 does not properly handle (1) a loop between a dot1x enabled port and an open-authentication dot1x enabled port and (2) a loop between a dot1x enabled port and a non-dot1x port, which allows remote attackers to cause a denial of service (traffic storm) via unspecified vectors that trigger many Spanning Tree Protocol (STP) Bridge Protocol Data Unit (BPDU) frames, aka Bug ID CSCtq36327.

The cat6000-dot1x component in Cisco IOS 12.2 before 12.2(33)SXI7 does not properly handle an external loop between a pair of dot1x enabled ports, which allows remote attackers to cause a denial of service (traffic storm) via unspecified vectors that trigger many unicast EAPoL Protocol Data Units (PDUs), aka Bug ID CSCtq36336.

The helper application in Cisco AnyConnect Secure Mobility Client (formerly AnyConnect VPN Client) before 2.5.3041, and 3.0.x before 3.0.629, on Linux and Mac OS X downloads a client executable file (vpndownloader.exe) without verifying its authenticity, which allows remote attackers to execute arbitrary code via the url property to a Java applet, aka Bug ID CSCsy05934.

Cisco IOS Unified Border Element (CUBE) in Cisco IOS before 15.3(2)T allows remote authenticated users to cause a denial of service (input queue wedge) via a crafted series of RTCP packets, aka Bug ID CSCuc42518.

Cisco Prime LAN Management Solution (LMS) 4.1 through 4.2.2 on Linux does not properly validate authentication and authorization requests in TCP sessions, which allows remote attackers to execute arbitrary commands via a crafted session, aka Bug ID CSCuc79779.

Apache Log4j2 2.0-beta9 through 2.15.0 (excluding security releases 2.12.2, 2.12.3, and 2.3.1) JNDI features used in configuration, log messages, and parameters do not protect against attacker controlled LDAP and other JNDI related endpoints. An attacker who can control log messages or log message parameters can execute arbitrary code loaded from LDAP servers when message lookup substitution is enabled. From log4j 2.15.0, this behavior has been disabled by default. From version 2.16.0 (along with 2.12.2, 2.12.3, and 2.3.1), this functionality has been completely removed. Note that this vulnerability is specific to log4j-core and does not affect log4net, log4cxx, or other Apache Logging Services projects.

The kernel in Cisco Native Unix (CNU) on Cisco Unified IP Phone 7900 series devices (aka TNP phones) with software before 9.3.1-ES10 does not properly validate unspecified system calls, which allows attackers to execute arbitrary code or cause a denial of service (memory overwrite) via a crafted binary.

The helper application in Cisco AnyConnect Secure Mobility Client (formerly AnyConnect VPN Client) before 2.3.185 on Windows, and on Windows Mobile, downloads a client executable file (vpndownloader.exe) without verifying its authenticity, which allows remote attackers to execute arbitrary code via the url property to a certain ActiveX control in vpnweb.ocx, aka Bug ID CSCsy00904.

The management interface in the Central Software component in Cisco Unified Computing System (UCS) does not properly validate the identity of vCenter consoles, which allows man-in-the-middle attackers to read or modify an inter-device data stream by spoofing an identity, aka Bug ID CSCtk00683.

The DHCPv6 server in Cisco IOS 12.2 through 12.4 and 15.0 through 15.2 and IOS XE 2.1.x through 2.6.x, 3.1.xS before 3.1.4S, 3.1.xSG and 3.2.xSG before 3.2.5SG, 3.2.xS, 3.2.xXO, 3.3.xS, and 3.3.xSG before 3.3.1SG allows remote attackers to cause a denial of service (device reload) via a malformed DHCPv6 packet, aka Bug ID CSCto57723.

The local file editor in the fabric-interconnect component in Cisco Unified Computing System (UCS) allows local users to gain privileges, and read or modify arbitrary files, via unspecified key bindings, aka Bug ID CSCtn04521.

The fabric-interconnect component in Cisco Unified Computing System (UCS) allows local users to cause a denial of service (component crash) via crafted "debug hardware" parameters, aka Bug ID CSCtq86468.

Cisco NX-OS allows local users to gain privileges and execute arbitrary commands via shell metacharacters in a command that calls the system library function, aka Bug IDs CSCtf23559 and CSCtf27780.

MCTools in the Cisco Management Controller in Cisco Unified Computing System (UCS) allows local users to gain privileges by entering crafted command-line parameters on a Fabric Interconnect device, aka Bug ID CSCtg20749.

A certain ActiveX control in CSDWebInstaller.ocx in Cisco Secure Desktop (CSD) does not properly verify the signature of an unspecified downloaded program, which allows remote attackers to execute arbitrary code by spoofing the CSD installation process, a different vulnerability than CVE-2010-0589.

The BGP implementation in Cisco IOS 15.2, IOS XE 3.5.xS before 3.5.2S, and IOS XR 4.1.0 through 4.2.2 allows remote attackers to cause a denial of service (multiple connection resets) by leveraging a peer relationship and sending a malformed attribute, aka Bug IDs CSCtt35379, CSCty58300, CSCtz63248, and CSCtz62914.

The CSDWebInstallerCtrl ActiveX control in CSDWebInstaller.ocx in Cisco Secure Desktop (CSD) allows remote attackers to download an unintended Cisco program onto a client machine, and execute this program, by identifying a Cisco program with a Cisco digital signature and then renaming this program to inst.exe, a different vulnerability than CVE-2010-0589 and CVE-2011-0926.

The BGP implementation in Cisco NX-OS does not properly filter segment types in AS paths, which allows remote attackers to cause a denial of service (BGP service reset) via a malformed UPDATE message, aka Bug ID CSCtn13043.

The Manager component in Cisco Unified Computing System (UCS) allows local users to cause a denial of service via an invalid Smart Call Home contact address, aka Bug ID CSCtl00186.