This vulnerability allows remote attackers to bypass authentication on affected installations of BMC Track-It! 20.21.01.102. Authentication is not required to exploit this vulnerability. The specific flaw exists within the authorization of HTTP requests. The issue results from the lack of authentication prior to allowing access to functionality. An attacker can leverage this vulnerability to bypass authentication on the system. Was ZDI-CAN-14618.

An issue was discovered in Joomla! 2.5.0 through 3.10.6 & 4.0.0 through 4.1.0. A user row was not bound to a specific authentication mechanism which could under very special circumstances allow an account takeover.

The Java Servlet framework on Cisco TelePresence Multipoint Switch (CTMS) devices with software 1.0.x, 1.1.x, 1.5.x, and 1.6.x does not require administrative authentication for unspecified actions, which allows remote attackers to execute arbitrary code via a crafted request, aka Bug ID CSCtf01253.

Cobbler, a Linux installation server that allows for rapid setup of network installation environments, has an improper authentication vulnerability starting in version 3.0.0 and prior to versions 3.2.3 and 3.3.7. `utils.get_shared_secret()` always returns `-1`, which allows anyone to connect to cobbler XML-RPC as user `''` password `-1` and make any changes. This gives anyone with network access to a cobbler server full control of the server. Versions 3.2.3 and 3.3.7 fix the issue.

An issue in compop.ca ONLINE MALL v.3.5.3 allows a remote attacker to execute arbitrary code via the rid, tid, et, and ts parameters.

Remote code execution vulnerability due to insufficient user privilege verification in reverseWall-MDS. Remote attackers can exploit the vulnerability such as stealing account, through remote code execution.

Meshtastic is an open source, off-grid, decentralized, mesh network. Meshtastic uses MQTT to communicate over an internet connection to a shared or private MQTT Server. Nodes can communicate directly via an internet connection or proxied through a connected phone (i.e., via bluetooth). Prior to version 2.5.1, multiple weaknesses in the MQTT implementation allow for authentication and authorization bypasses resulting in unauthorized control of MQTT-connected nodes. Version 2.5.1 contains a patch.

Insufficient authentication in the MQTT backend (broker) allows an attacker to access and even manipulate the telemetry data of the entire fleet of vehicles using the HopeChart HQT-401 telematics unit. Other models are possibly affected too. Multiple vulnerabilities were identified: - The MQTT backend does not require authentication, allowing unauthorized connections from an attacker. - The vehicles publish their telemetry data (e.g. GPS Location, speed, odometer, fuel, etc) as messages in public topics. The backend also sends commands to the vehicles as MQTT posts in public topics. As a result, an attacker can access the confidential data of the entire fleet that is managed by the backend. - The MQTT messages sent by the vehicles or the backend are not encrypted or authenticated. An attacker can create and post messages to impersonate a vehicle or the backend. The attacker could then, for example, send incorrect information to the backend about the vehicle's location. - The backend can inject data into a vehicle´s CAN bus by sending a specific MQTT message on a public topic. Because these messages are not authenticated or encrypted, an attacker could impersonate the backend, create a fake message and inject CAN data in any vehicle managed by the backend. The confirmed version is 201808021036, however further versions have been also identified as potentially impacted.

Improper Authentication vulnerability in Apache Solr. Solr instances using the PKIAuthenticationPlugin, which is enabled by default when Solr Authentication is used, are vulnerable to Authentication bypass. A fake ending at the end of any Solr API URL path, will allow requests to skip Authentication while maintaining the API contract with the original URL Path. This fake ending looks like an unprotected API path, however it is stripped off internally after authentication but before API routing. This issue affects Apache Solr: from 5.3.0 before 8.11.4, from 9.0.0 before 9.7.0. Users are recommended to upgrade to version 9.7.0, or 8.11.4, which fix the issue.

The web-based administration interface on the Camtron CMNC-200 Full HD IP Camera and TecVoz CMNC-200 Megapixel IP Camera with firmware 1.102A-008 allows remote attackers to bypass authentication via a // (slash slash) at the beginning of a URI, as demonstrated by the //system.html URI.

TeslaMate before 1.25.1 (when using the default Docker configuration) allows attackers to open doors of Tesla vehicles, start Keyless Driving, and interfere with vehicle operation en route. This occurs because an attacker can leverage Grafana login access to obtain a token for Tesla API calls.

Improper Authentication vulnerability in Microchip TimeProvider 4100 (login modules) allows Session Hijacking.This issue affects TimeProvider 4100: from 1.0 before 2.4.7.

An insufficient authorization vulnerability in web component of EPMM prior to 12.1.0.1 allows an unauthorized attacker within the network to execute arbitrary commands on the underlying operating system of the appliance.

The default configuration of Pandora FMS 3.1 and earlier specifies an empty string for the loginhash_pwd field, which allows remote attackers to bypass authentication by sending a request to index.php with "admin" in the loginhash_user parameter, in conjunction with the md5 hash of "admin" in the loginhash_data parameter.

Improper Authentication vulnerability in upKeeper Solutions product upKeeper Manager allows Authentication Bypass.This issue affects upKeeper Manager: through 5.1.9.

Sysaid – Sysaid System Takeover - An attacker can bypass the authentication process by accessing to: /wmiwizard.jsp, Then to: /ConcurrentLogin.jsp, then click on the login button, and it will redirect you to /home.jsp without any authentication.

Osprey Pump Controller version 1.01 could allow an unauthenticated user to create an account and bypass authentication, thereby gaining unauthorized access to the system. A threat actor could exploit this vulnerability to create a user account without providing valid credentials. A threat actor who successfully exploits this vulnerability could gain access to the pump controller and cause disruption in operation, modify data, or shut down the controller.

Rocket Software UniData versions prior to 8.2.4 build 3003 and UniVerse versions prior to 11.3.5 build 1001 or 12.2.1 build 2002 suffer from an authentication bypass vulnerability, where a special username with a deterministic password can be leveraged to bypass authentication checks and execute OS commands as the root user.

VMware Workspace ONE Access has two authentication bypass vulnerabilities (CVE-2022-22955 & CVE-2022-22956) in the OAuth2 ACS framework. A malicious actor may bypass the authentication mechanism and execute any operation due to exposed endpoints in the authentication framework.

Servision - CWE-287: Improper Authentication

An issue in WooCommerce Payments plugin for WordPress (versions 5.6.1 and lower) allows an unauthenticated attacker to send requests on behalf of an elevated user, like administrator. This allows a remote, unauthenticated attacker to gain admin access on a site that has the affected version of the plugin activated.

An issue was discovered in Servisnet Tessa 0.0.2. An attacker can add a new sysadmin user via a manipulation of the Authorization HTTP header.

Improper authentication in the Intel(R) Edge Insights for Industrial software before version 2.6.1 may allow an unauthenticated user to potentially enable escalation of privilege via network access.

An issue in Ocuco Innovation - REPORTS.EXE v2.10.24.13 allows attackers to bypass authentication and escalate privileges to Administrator via a crafted TCP packet.

An authentication bypass in Optoma 1080PSTX C02 allows an attacker to access the administration console without valid credentials.

An issue in Ocuco Innovation - REPORTSERVER.EXE v2.10.24.13 allows attackers to bypass authentication and escalate privileges to Administrator via a crafted TCP packet.

An issue in Ocuco Innovation - INVCLIENT.EXE v2.10.24.5 allows attackers to bypass authentication and escalate privileges to Administrator via a crafted TCP packet.

An issue in Ocuco Innovation - INNOVASERVICEINTF.EXE v2.10.24.17 allows attackers to bypass authentication and escalate privileges to Administrator via a crafted TCP packet.

A remote urlaccesscontroller authentication bypass vulnerability was discovered in HPE Intelligent Management Center (iMC) version(s): Prior to iMC PLAT 7.3 (E0705P07).

maddy is a composable, all-in-one mail server. Starting with version 0.2.0 and prior to version 0.6.3, maddy allows a full authentication bypass if SASL authorization username is specified when using the PLAIN authentication mechanisms. Instead of validating the specified username, it is accepted as is after checking the credentials for the authentication username. maddy 0.6.3 includes the fix for the bug. There are no known workarounds.

A vulnerability in the single sign-on (SSO) implementation of Cisco BroadWorks Application Delivery Platform and Cisco BroadWorks Xtended Services Platform could allow an unauthenticated, remote attacker to forge the credentials required to access an affected system. This vulnerability is due to the method used to validate SSO tokens. An attacker could exploit this vulnerability by authenticating to the application with forged credentials. A successful exploit could allow the attacker to commit toll fraud or to execute commands at the privilege level of the forged account. If that account is an Administrator account, the attacker would have the ability to view confidential information, modify customer settings, or modify settings for other users. To exploit this vulnerability, the attacker would need a valid user ID that is associated with an affected Cisco BroadWorks system.

Teltonika’s Remote Management System versions 4.14.0 is vulnerable to an unauthorized attacker registering previously unregistered devices through the RMS platform. If the user has not disabled the "RMS management feature" enabled by default, then an attacker could register that device to themselves. This could enable the attacker to perform different operations on the user's devices, including remote code execution with 'root' privileges (using the 'Task Manager' feature on RMS).

In S+ Operations and S+ History, it is possible that an unauthenticated user could inject values to the Operations History server (or standalone S+ History server) and ultimately write values to the controlled process.

AVE DOMINAplus <=1.10.x suffers from an authentication bypass vulnerability due to missing control check when directly calling the autologin GET parameter in changeparams.php script. Setting the autologin value to 1 allows an unauthenticated attacker to permanently disable the authentication security control and access the management interface with admin privileges without providing credentials.

Microsoft Dynamics 365 Business Central Elevation of Privilege Vulnerability

The helpmanager servlet in the web server in HP OpenView Performance Insight (OVPI) 5.4 and earlier does not properly authenticate and validate requests, which allows remote attackers to execute arbitrary commands via vectors involving upload of a JSP document.

EMC NetWorker 8.2.1.x and 8.2.2.x before 8.2.2.6 and 9.x before 9.0.0.6 mishandles authentication, which allows remote attackers to execute arbitrary commands by leveraging access to a different NetWorker instance.

The RingCentral Communications plugin for WordPress is vulnerable to Authentication Bypass due to improper validation within the ringcentral_admin_login_2fa_verify() function in versions 1.5 to 1.6.8. This makes it possible for unauthenticated attackers to log in as any user simply by supplying identical bogus codes.

Use of default password vulnerability in PowerPanel Business Local/Remote for Windows v4.8.6 and earlier, PowerPanel Business Management for Windows v4.8.6 and earlier, PowerPanel Business Local/Remote for Linux 32bit v4.8.6 and earlier, PowerPanel Business Local/Remote for Linux 64bit v4.8.6 and earlier, PowerPanel Business Management for Linux 32bit v4.8.6 and earlier, PowerPanel Business Management for Linux 64bit v4.8.6 and earlier, PowerPanel Business Local/Remote for MacOS v4.8.6 and earlier, and PowerPanel Business Management for MacOS v4.8.6 and earlier allows remote attackers to log in to the server directly to perform administrative functions. Upon installation or upon first login, the application does not ask the user to change the 'admin' password.

An authentication bypass vulnerability exists in the httpd nvram.cgi functionality of Yifan YF325 v1.0_20221108. A specially crafted network request can lead to arbitrary command execution. An attacker can send a network request to trigger this vulnerability.

The UserPro plugin for WordPress is vulnerable to authentication bypass in versions up to, and including, 5.1.1. This is due to insufficient verification on the user being supplied during a Facebook login through the plugin. This makes it possible for unauthenticated attackers to log in as any existing user on the site, such as an administrator, if they have access to the email. An attacker can leverage CVE-2023-2448 and CVE-2023-2446 to get the user's email address to successfully exploit this vulnerability.

The system application (com.transsion.kolun.aiservice) component does not perform an authentication check, which allows attackers to perform malicious exploitations and affect system services.

The RegistrationMagic plugin for WordPress is vulnerable to authentication bypass in versions up to, and including, 5.2.1.0. This is due to insufficient verification on the user being supplied during a Google social login through the plugin. This makes it possible for unauthenticated attackers to log in as any existing user on the site, such as an administrator, if they have access to the email.

** UNSUPPORTED WHEN ASSIGNED ** Improper Authentication vulnerability in Apache Submarine Commons Utils. If the user doesn't explicitly set `submarine.auth.default.secret`, a default value will be used. This issue affects Apache Submarine Commons Utils: from 0.8.0. As this project is retired, we do not plan to release a version that fixes this issue. Users are recommended to find an alternative or restrict access to the instance to trusted users. NOTE: This vulnerability only affects products that are no longer supported by the maintainer.

Broken Authentication vulnerability in SoftLab Integrate Google Drive.This issue affects Integrate Google Drive: from n/a through 1.3.93.

Priority Web version 19.1.0.68, parameter manipulation on an unspecified end-point may allow authentication bypass.

login.php in Zenas PaoBacheca Guestbook 2.1, when register_globals is enabled, allows remote attackers to bypass authentication and gain administrative access by setting the login_ok parameter to 1.

Use of Password Hash Instead of Password for Authentication in SICK FTMg AIR FLOW SENSOR with Partnumbers 1100214, 1100215, 1100216, 1120114, 1120116, 1122524, 1122526 allows an unprivileged remote attacker to use a password hash instead of an actual password to login to a valid user account via the REST interface.

The Profile Builder – User Profile & User Registration Forms plugin for WordPress is vulnerable to unauthorized password resets in versions up to, and including 3.9.0. This is due to the plugin using native password reset functionality, with insufficient validation on the password reset function (wppb_front_end_password_recovery). The function uses the plaintext value of a password reset key instead of a hashed value which means it can easily be retrieved and subsequently used. An attacker can leverage CVE-2023-0814, or another vulnerability like SQL Injection in another plugin or theme installed on the site to successfully exploit this vulnerability.