A vulnerability was detected in Tenda O3 1.0.0.10(2478). This issue affects the function SetValue/GetValue of the file /goform/sysAutoReboot. Performing a manipulation of the argument enable results in stack-based buffer overflow. The attack may be initiated remotely. The exploit is now public and may be used.

A vulnerability was identified in Tenda CH22 1.0.0.1. This affects the function fromRouteStatic of the file /goform/RouteStatic. Such manipulation of the argument page leads to buffer overflow. The attack can be launched remotely. The exploit is publicly available and might be used.

A vulnerability has been found in Tenda AC6 15.03.06.50. This issue affects some unknown processing of the file /goform/WifiGuestSet of the component HTTP Request Handler. Such manipulation of the argument shareSpeed leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

A weakness has been identified in Tenda AC8 16.03.34.06. The affected element is the function formSetServerConfig of the file /goform/SetServerConfig. Executing manipulation can lead to buffer overflow. It is possible to launch the attack remotely. The exploit has been made available to the public and could be exploited.

A security flaw has been discovered in D-Link DIR-825 up to 2.10. Affected by this vulnerability is the function sub_4106d4 of the file apply.cgi. The manipulation of the argument countdown_time results in buffer overflow. The attack can be executed remotely. The exploit has been released to the public and may be exploited. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was determined in Tenda CH22 1.0.0.1. This vulnerability affects the function formWrlExtraGet of the file /goform/GstDhcpSetSer. This manipulation of the argument dips causes buffer overflow. The attack is possible to be carried out remotely. The exploit has been publicly disclosed and may be utilized.

A flaw has been found in Belkin F9K1015 1.00.10. This affects an unknown part of the file /goform/formPPPoESetup. This manipulation of the argument pppUserName causes buffer overflow. Remote exploitation of the attack is possible. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A security flaw has been discovered in Tenda AC15 15.03.05.18. Affected is an unknown function of the file /goform/saveAutoQos. Performing a manipulation of the argument enable results in stack-based buffer overflow. Remote exploitation of the attack is possible. The exploit has been released to the public and may be used for attacks.

A security vulnerability has been detected in UTT 1200GW and 1250GW up to 3.0.0-170831/3.2.2-200710. This vulnerability affects unknown code of the file /goform/formApMail. The manipulation of the argument senderEmail leads to buffer overflow. The attack may be initiated remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability has been found in UTT HiPER 840G up to 3.1.1-190328. Affected by this issue is the function strcpy of the file /goform/formTaskEdit. The manipulation of the argument txtMin2 leads to buffer overflow. Remote exploitation of the attack is possible. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A security flaw has been discovered in UTT HiPER 840G up to 3.1.1-190328. Impacted is an unknown function of the file /goform/getOneApConfTempEntry. The manipulation of the argument tempName results in buffer overflow. It is possible to launch the attack remotely. The exploit has been released to the public and may be exploited. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Tenda AC8 16.03.34.09 and classified as critical. Affected by this issue is the function route_static_check of the file /goform/SetStaticRouteCfg. The manipulation of the argument list leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

A security vulnerability has been detected in TOTOLINK N600R up to 4.3.0cu.7866_B20220506. This impacts the function setWiFiBasicConfig of the file /cgi-bin/cstecgi.cgi of the component HTTP Request Handler. Such manipulation of the argument wepkey leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed publicly and may be used.

A vulnerability was detected in Tenda AC18 15.03.05.19. This affects an unknown function of the file /goform/WizardHandle. The manipulation of the argument WANT/mtuvalue results in stack-based buffer overflow. The attack can be launched remotely. The exploit is now public and may be used.

A vulnerability has been found in UTT 进取 518G up to V3v3.2.7-210919-161313. This vulnerability affects the function sub_4247AC of the file /goform/formRemoteControl. The manipulation of the argument Profile leads to buffer overflow. The attack is possible to be carried out remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in UTT 进取 518G up to V3v3.2.7-210919-161313. This issue affects some unknown processing of the file /goform/formTaskEdit_ap. The manipulation of the argument txtMin2 results in buffer overflow. The attack may be performed from remote. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way.

A security vulnerability has been detected in Belkin F9K1015 1.00.10. Affected by this vulnerability is an unknown functionality of the file /goform/formConnectionSetting. The manipulation of the argument max_Conn leads to buffer overflow. The attack may be initiated remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in D-Link DCS-935L up to 1.13.01. The impacted element is the function sub_402280 of the file /HNAP1/. The manipulation of the argument HNAP_AUTH/SOAPAction results in stack-based buffer overflow. The attack may be launched remotely. The exploit has been made public and could be used. This vulnerability only affects products that are no longer supported by the maintainer.

A flaw has been found in Tenda AC7 15.03.06.44. This issue affects some unknown processing of the file /goform/SetDDNSCfg. This manipulation of the argument ddnsEn causes stack-based buffer overflow. The attack can be initiated remotely. The exploit has been published and may be used.

A vulnerability was found in Belkin F9K1015 1.00.10. This issue affects some unknown processing of the file /goform/formSetLanguage. Performing a manipulation of the argument webpage results in buffer overflow. The attack is possible to be carried out remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was detected in Belkin F9K1015 1.00.10. Affected by this issue is some unknown functionality of the file /goform/formL2TPSetup. The manipulation of the argument L2TPUserName results in buffer overflow. The attack may be launched remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Tenda AC7 15.03.06.44. The affected element is an unknown function of the file /goform/WifiMacFilterSet. Performing a manipulation of the argument wifi_chkHz results in stack-based buffer overflow. The attack may be initiated remotely. The exploit has been made public and could be used.

A vulnerability has been found in D-Link DI-7100G C1 up to 20250928. This issue affects the function sub_4BD4F8 of the file /webchat/hi_block.asp of the component jhttpd. The manipulation of the argument popupId leads to buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used.

A vulnerability has been found in Tenda W12 3.0.0.6(3948). The affected element is the function wifiMacFilterSet of the file /goform/modules of the component HTTP Request Handler. The manipulation of the argument mac leads to stack-based buffer overflow. The attack is possible to be carried out remotely. The exploit has been disclosed to the public and may be used.

A vulnerability has been found in Tenda AC7 15.03.06.44. Impacted is an unknown function of the file /goform/SetUpnpCfg. Such manipulation of the argument upnpEn leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

A vulnerability classified as critical was found in Tenda AC10 16.03.10.13. Affected by this vulnerability is the function FUN_0044db3c of the file /goform/fast_setting_wifi_set. The manipulation of the argument timeZone leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was identified in H3C Magic B3 up to 100R002. This affects the function AddMacList/EditMacList of the file /goform/aspForm. The manipulation of the argument param leads to buffer overflow. The attack can be initiated remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was identified in Belkin F9K1015 1.00.10. The affected element is an unknown function of the file /goform/formWanTcpipSetup. The manipulation of the argument pppUserName leads to buffer overflow. It is possible to initiate the attack remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in D-Link DI-8003 16.07.16A1. It has been declared as critical. Affected by this vulnerability is the function upgrade_filter_asp of the file /upgrade_filter.asp. The manipulation of the argument path leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was detected in UTT 1250GW up to 3.2.2-200710. This vulnerability affects the function sub_453DC of the file /goform/formConfigApConfTemp. Performing manipulation results in buffer overflow. Remote exploitation of the attack is possible. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Tenda AC10 16.03.10.13 and classified as critical. Affected by this issue is the function formSetRebootTimer of the file /goform/SetSysAutoRebbotCfg. The manipulation of the argument rebootTime leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in D-Link DI-8003 16.07.16A1. It has been rated as critical. Affected by this issue is the function dbsrv_asp of the file /dbsrv.asp. The manipulation of the argument str leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

A security vulnerability has been detected in UTT 1200GW up to 3.0.0-170831. This affects the function sub_4B48F8 of the file /goform/formApLbConfig. Such manipulation of the argument loadBalanceNameOld leads to buffer overflow. The attack may be launched remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability, which was classified as critical, was found in Tenda AC10 16.03.10.13. Affected is the function FUN_0046AC38 of the file /goform/WifiExtraSet. The manipulation of the argument wpapsk_crypto leads to stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was detected in Tenda AC20 up to 16.03.08.12. The impacted element is the function strcpy of the file /goform/GetParentControlInfo. The manipulation of the argument mac results in buffer overflow. The attack may be performed from remote. The exploit is now public and may be used.

A vulnerability has been found in Mercury KM08-708H GiGA WiFi Wave2 1.1. Affected by this issue is the function sub_450B2C of the file /goform/mcr_setSysAdm. The manipulation of the argument ChgUserId leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability classified as critical has been found in Tenda AC6 15.03.05.16. Affected is the function GetParentControlInfo of the file /goform/GetParentControlInfo. The manipulation of the argument src/mac leads to stack-based buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. Other parameters might be affected as well.

A vulnerability, which was classified as critical, was found in TOTOLINK AC1200 T8 and AC1200 T10 4.1.5cu.861_B20230220/4.1.8cu.5207. This affects the function setParentalRules of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument desc/week/sTime/eTime leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. Other parameters might be affected as well. The vendor was contacted early about this disclosure but did not respond in any way.

Buffer overflow in Cybozu Office 9 and 10 before 10.1.0, Mailwise 4 and 5 before 5.1.4, and Dezie 8 before 8.1.1 allows remote authenticated users to execute arbitrary code via e-mail messages.

In FreeBSD 12.1-STABLE before r357490, 12.1-RELEASE before 12.1-RELEASE-p3, 11.3-STABLE before r357489, and 11.3-RELEASE before 11.3-RELEASE-p7, incorrect use of a user-controlled pointer in the epair virtual network module allowed vnet jailed privileged users to panic the host system and potentially execute arbitrary code in the kernel.

Multiple vulnerabilities in the web-based management interface of Cisco Small Business RV320 and RV325 Series Routers and Cisco Small Business RV016, RV042, and RV082 Routers could allow an authenticated, remote attacker with administrative privileges to execute arbitrary code on an affected device. The vulnerabilities are due to insufficient boundary restrictions on user-supplied input to scripts in the web-based management interface. An attacker with administrative privileges that are sufficient to log in to the web-based management interface could exploit each vulnerability by sending crafted requests that contain overly large values to an affected device, causing a stack overflow. A successful exploit could allow the attacker to cause the device to crash or allow the attacker to execute arbitrary code with root privileges on the underlying operating system.

A vulnerability was found in TOTOLINK EX1800T up to 9.1.0cu.2112_B20220316. It has been declared as critical. Affected by this vulnerability is the function setWiFiExtenderConfig of the file /cgi-bin/cstecgi.cgi. The manipulation of the argument apcliSsid leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

A vulnerability, which was classified as critical, was found in Tenda AC8 16.03.34.06. Affected is the function formGetRouterStatus of the file /goform/MtuSetMacWan. The manipulation of the argument shareSpeed leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability in the Import Cisco IMC configuration utility of Cisco Integrated Management Controller (IMC) could allow an authenticated, remote attacker to cause a denial of service (DoS) condition and implement arbitrary commands with root privileges on an affected device. The vulnerability is due to improper bounds checking by the import-config process. An attacker could exploit this vulnerability by sending malicious packets to an affected device. When the packets are processed, an exploitable buffer overflow condition may occur. A successful exploit could allow the attacker to implement arbitrary code on the affected device with elevated privileges.

Multiple vulnerabilities in the web-based management interface of Cisco RV110W, RV130, RV130W, and RV215W Series Routers could allow an authenticated, remote attacker with administrative privileges to execute arbitrary commands. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the web UI of the Cisco Firepower Management Center (FMC) could allow an authenticated, remote attacker to execute arbitrary commands on an affected device. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending crafted input to the web UI. A successful exploit could allow the attacker to execute arbitrary commands within the affected device.

Diagnostics functionality on D-Link DSL-3782 devices with firmware EU v. 1.01 has a buffer overflow, allowing authenticated remote attackers to execute arbitrary code via a long Addr value to the 'set Diagnostics_Entry' function in an HTTP request, related to /userfs/bin/tcapi.

A weakness has been identified in Tenda AC20 16.03.08.12. This affects the function httpd of the file /goform/openSchedWifi. Executing a manipulation of the argument schedStartTime/schedEndTime can lead to buffer overflow. The attack may be performed from remote. The exploit has been made available to the public and could be used for attacks.

A vulnerability was found in UTT 进取 512W up to 1.7.7-171114. This affects an unknown part of the file /goform/formWebAuthGlobalConfig. Performing manipulation of the argument hidcontact results in memory corruption. Remote exploitation of the attack is possible. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was identified in Linksys RE6500, RE6250, RE6300, RE6350, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. This affects the function AP_get_wired_clientlist_setClientsName of the file mod_form.so. The manipulation of the argument clientsname_0 leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.