The CONS_HISTORY ioctl handler did not adequately validate the requested history size. A large value caused an integer overflow in the buffer size calculation, resulting in a heap allocation smaller than expected. Subsequent initialization of the buffer wrote beyond the end of the allocation. An unprivileged local user with access to a vt(4) device can trigger an out-of-bounds write in the kernel, potentially escalating privileges.

The ELF image activator cleared per-process ASLR preference flags for setuid binaries after the code that computes the PIE base address, rather than before. As a result, a user-requested ASLR disable was still in effect at the point where the base address was chosen. An unprivileged local user can disable ASLR for a setuid PIE binary by calling procctl(2) before execve(2). This makes exploitation of any separate memory corruption vulnerability in that binary significantly easier.

The Linuxulator determined whether a binary was set-user-ID or set-group-ID by checking the P_SUGID process flag. During execve(2), this flag is not yet set at the point where the auxiliary vector is constructed, so AT_SECURE was incorrectly set to zero for set-user-ID and set-group-ID executables. An unprivileged local user can inject a shared library via LD_PRELOAD into a set-user-ID or set-group-ID Linux binary, gaining the privileges of that binary.

The kernel handler for IPV6_MSFILTER dropped a serializing lock in order to copy the source-filter list from userspace, then reacquired the lock. During this window another thread could free the multicast filter structure, leaving the handler with a stale pointer to freed memory. An unprivileged local user can exploit this use-after-free to escalate privileges.

sigqueue(2) was marked as permitted in capability mode with the introduction of Capsicum in 2011, but the implementation of kern_sigqueue did not include a capability mode check restricting signal delivery to the calling process's own PID. A process in capability mode can use sigqueue(2) to send signals to any process it could signal following standard Unix permissions, bypassing the Capsicum sandbox restriction. A compromised sandboxed process could interfere with other processes, for example by sending SIGKILL or SIGSTOP. This could be any process running as the same user, or any process, for a superuser sandboxed process.

dsp_mmap_single() validated the requested mapping by checking the sum of the user-supplied offset and length against the buffer size. This addition could overflow, so that a large offset and length wrapped around and passed the check. The offset was then narrowed from 64 to 32 bits when converted to a buffer address, yielding a mapping that extended past the audio buffer into unrelated kernel memory. The /dev/dsp device nodes are world-accessible by default. On a system with an audio device, either issue allows an unprivileged local user to read and write kernel memory, which can be used to escalate privileges, potentially gaining full control of the affected system. At a minimum, an attacker can crash the kernel, resulting in a Denial of Service (DoS).

Second, the audio buffer backing a mapping could be freed when the device was closed even though the mapping remained valid. The freed memory could then be reused elsewhere while still accessible through the stale mapping. The /dev/dsp device nodes are world-accessible by default. On a system with an audio device, either issue allows an unprivileged local user to read and write kernel memory, which can be used to escalate privileges, potentially gaining full control of the affected system. At a minimum, an attacker can crash the kernel, resulting in a Denial of Service (DoS).

The KTLS receive path decrypted each record in place, assuming that the mbufs holding received data were anonymous and safe to modify. This assumption does not hold for data placed on a socket by sendfile(2), which can reference file-backed memory directly through non-anonymous M_EXTPG pages or EXT_SFBUF mbufs. When the sender transmits such data over a loopback connection without enabling KTLS on the transmit side, the file-backed mbufs reach the receiver's decryption path unchanged. Decrypting a record in place then overwrites the backing file's page cache instead of a private copy of the data. An unprivileged local user who can read a file can overwrite its contents with data of their choosing by sending the file over a loopback connection on which they have enabled KTLS receive. The write modifies the page cache directly, so it bypasses file flags such as schg and is written back to disk. By overwriting a setuid binary or other trusted file, a local user can escalate privileges, potentially gaining full control of the affected system.

When used to deliver a signal to a specific thread, thr_kill2(2) called p_cansignal() to determine whether the operation was permitted but did not check the result before delivering the signal. The signal was sent even when the permission check failed. The system call returned the resulting error to the caller, but by then the signal had already been delivered. The missing check allows an unprivileged local user who knows or can guess a target's process and thread IDs to send any signal to a process they would not normally be permitted to signal, including processes owned by other users or by root. The same check enforces jail boundaries, so a jailed process can signal processes on the host or in other jails. Thread IDs are allocated globally and sequentially, and so can be discovered by brute force with no visibility into the target. An attacker can stop or terminate arbitrary processes, including critical system daemons, resulting in a Denial of Service (DoS).

In the case of the cap_net service, when a key present in the old limit was omitted from the new limit, the missing key was treated as "allow any" instead of being rejected. In certain scenarios, an application that had previously restricted a subset of network operations could ask for a new limit that extended the permissions of the process.

When bsdinstall or bsdconfig are prompted to scan for nearby Wi-Fi networks, they build up a list of network names and use bsddialog(1) to prompt the user to select a network. This is implemented using a shell script, and the code which handled network names was not careful to prevent expansion by the shell. As a result, a suitably crafted network name can be used to execute commands via a subshell. The problem can be exploited to execute code as root on the system running bsdinstall or bsdconfig. The attacker would need to create an access point with a specially crafted name and be within range of a Wi-Fi scan. Note that bsdinstall and bsdconfig are vulnerable as soon as the user prompts them to scan for nearby networks; they do not need to actually select the malicious network.

libcasper(3) communicates with helper processes via UNIX domain sockets, and uses the select(2) system call to wait for data to become available. However, it does not verify that its socket descriptor fits within select(2)'s descriptor set size limit of FD_SETSIZE (1024). An attacker able to cause an application using libcasper(3) to allocate large file descriptors, e.g., by opening many descriptors and executing a program which is not careful to close them upon startup, may trigger stack corruption. If the target application runs with setuid root privileges, this could be used to escalate local privileges.

ptrace(PT_SC_REMOTE) failed to properly validate parameters for the syscall(2) and __syscall(2) meta-system calls. As a result, a user with the ability to debug a process may trigger arbitrary code execution in the kernel, even if the target process has no special privileges. The missing validation allows an unprivileged local user to escalate privileges, potentially gaining full control of the affected system.

When a fusefs file system implements extended attributes, the kernel may send a FUSE_LISTXATTR message to the userspace daemon to retrieve the list of extended attributes for a given file. The FUSE protocol requires the daemon to return a packed list of NUL-terminated strings. The fusefs kernel module calls strlen() on this daemon-supplied buffer without first verifying that the entire list is NUL-terminated. If a malicious daemon sends a non-NUL-terminated list, the fusefs kernel module may read beyond the end of one heap-allocated buffer and potentially write beyond the end of a second buffer. A malicious daemon could disclose up to 253 bytes of kernel heap memory, or it could inject up to 250 attacker-controlled bytes into unallocated kernel heap space.

A file descriptor can be closed while a thread is blocked in a poll(2) or select(2) call waiting for that descriptor. Because the blocked thread does not hold a reference to the underlying object, this closure may result in the object being freed while the thread remains blocked. In this situation, the kernel must remove the blocked thread from the per-object wait queue prior to freeing the object. In the case of some file descriptor types, the kernel failed to unlink blocked threads from the object before freeing it. When the blocked thread is subsequently woken, it accesses memory that has already been freed resulting in a use-after-free vulnerability. The use-after-free vulnerability may be triggered by an unprivileged local user and can be exploited to obtain superuser privileges.

The setcred(2) system call is only available to privileged users. However, before the privilege level of the caller is checked, the user-supplied list of supplementary groups is copied into a fixed-size kernel stack buffer without first validating its length. If the supplied list exceeds the capacity of that buffer, a stack buffer overflow occurs. Because the bounds check on the supplementary groups list occurs after the kernel stack buffer has already been written, an unprivileged local user may trigger the overflow without holding any special privilege. Successful exploitation may allow an attacker to execute arbitrary code in the context of the kernel, allowing an unprivileged local user to gain elevated privileges on the affected system.

When processing the header of an incoming message, libnv failed to properly validate the message size. The lack of validation allows a malicious program to write outside the bounds of a heap allocation. This can trigger a crash or system panic, and it may be possible for an unprivileged user to exploit the bug to elevate their privileges.

When exchanging data over a socket, libnv uses select(2) to wait for data to arrive. However, it does not verify whether the provided socket descriptor fits in select(2)'s file descriptor set size limit of FD_SETSIZE (1024). An attacker who is able to force a libnv application to allocate large file descriptors, e.g., by opening many descriptors and executing a program which is not careful to close them upon startup, can trigger stack corruption. If the target application is setuid-root, then this could be used to elevate local privileges.

As dhclient is building an environment to pass to dhclient-script, it may need to resize the array of string pointers. The code which expands the array incorrectly calculates its new size when requesting memory, resulting in a heap buffer overrun. A specially crafted packet can cause dhclient to overrun its buffer of environment entries. This can result in a crash, but it may be possible to leverage this bug to achieve remote code execution.

Incorrect packet validation allowed unbounded recursion parsing SCTP chunk parameters. This can eventually result in a stack overflow and panic. Remote attackers can craft packets which cause affected systems to panic. This affects any system where pf is configured to process traffic, independent of the configured ruleset.

An operator precedence bug in the kernel results in a scenario where a buffer overflow causes attacker-controlled data to overwrite adjacent execve(2) argument buffers. The bug may be exploitable by an unprivileged user to obtain superuser privileges.

The BOOTP file field is written to the lease file without escaping embedded double-quotes, allowing injection of arbitrary dhclient.conf directives. When the lease file is subsequently re-parsed by dhclient, e.g., after a system restart, an attacker-controlled field from the lease is passed to dhclient-script(8), which evaluates it. A rogue DHCP server may be able to execute arbirary code as root on a system running dhclient.

In order to apply a particular protection key to an address range, the kernel must update the corresponding page table entries. The subroutine which handled this failed to take into account the presence of 1GB largepage mappings created using the shm_create_largepage(3) interface. In particular, it would always treat a page directory page entry as pointing to another page table page. The bug can be abused by an unprivileged user to cause pmap_pkru_update_range() to treat userspace memory as a page table page, and thus overwrite memory to which the application would otherwise not have access.

The implementation of TIOCNOTTY failed to clear a back-pointer from the structure representing the controlling terminal to the calling process' session. If the invoking process then exits, the terminal structure may end up containing a pointer to freed memory. A malicious process can abuse the dangling pointer to grant itself root privileges.

A regression in the way hashes were calculated caused rules containing the address range syntax (x.x.x.x - y.y.y.y) that only differ in the address range(s) involved to be silently dropped as duplicates. Only the first of such rules is actually loaded into pf. Ranges expressed using the address[/mask-bits] syntax were not affected. Some keywords representing actions taken on a packet-matching rule, such as 'log', 'return tll', or 'dnpipe', may suffer from the same issue. It is unlikely that users have such configurations, as these rules would always be redundant. Affected rules are silently ignored, which can lead to unexpected behaviour including over- and underblocking.

Each RPCSEC_GSS data packet is validated by a routine which checks a signature in the packet. This routine copies a portion of the packet into a stack buffer, but fails to ensure that the buffer is sufficiently large, and a malicious client can trigger a stack overflow. Notably, this does not require the client to authenticate itself first. As kgssapi.ko's RPCSEC_GSS implementation is vulnerable, remote code execution in the kernel is possible by an authenticated user that is able to send packets to the kernel's NFS server while kgssapi.ko is loaded into the kernel. In userspace, applications which have librpcgss_sec loaded and run an RPC server are vulnerable to remote code execution from any client able to send it packets. We are not aware of any such applications in the FreeBSD base system.

On a system exposing an NVMe/TCP target, a remote client can trigger a kernel panic by sending a CONNECT command for an I/O queue with a bogus or stale CNTLID. An attacker with network access to the NVMe/TCP target can trigger an unauthenticated Denial of Service condition on the affected machine.

When a challenge ACK is to be sent tcp_respond() constructs and sends the challenge ACK and consumes the mbuf that is passed in. When no challenge ACK should be sent the function returns and leaks the mbuf. If an attacker is either on path with an established TCP connection, or can themselves establish a TCP connection, to an affected FreeBSD machine, they can easily craft and send packets which meet the challenge ACK criteria and cause the FreeBSD host to leak an mbuf for each crafted packet in excess of the configured rate limit settings i.e. with default settings, crafted packets in excess of the first 5 sent within a 1s period will leak an mbuf. Technically, off-path attackers can also exploit this problem by guessing the IP addresses, TCP port numbers and in some cases the sequence numbers of established connections and spoofing packets towards a FreeBSD machine, but this is harder to do effectively.

The rtsock_msg_buffer() function serializes routing information into a buffer. As a part of this, it copies sockaddr structures into a sockaddr_storage structure on the stack. It assumes that the source sockaddr length field had already been validated, but this is not necessarily the case, and it's possible for a malicious userspace program to craft a request which triggers a 127-byte overflow. In practice, this overflow immediately overwrites the canary for the rtsock_msg_buffer() stack frame, resulting in a panic once the function returns. The bug allows an unprivileged user to crash the kernel by triggering a stack buffer overflow in rtsock_msg_buffer(). In particular, the overflow will corrupt a stack canary value that is verified when the function returns; this mitigates the impact of the stack overflow by triggering a kernel panic. Other kernel bugs may exist which allow userspace to find the canary value and thus defeat the mitigation, at which point local privilege escalation may be possible.

Due to a programming error, blocklistd leaks a socket descriptor for each adverse event report it receives. Once a certain number of leaked sockets is reached, blocklistd becomes unable to run the helper script: a child process is forked, but this child dereferences a null pointer and crashes before it is able to exec the helper. At this point, blocklistd still records adverse events but is unable to block new addresses or unblock addresses whose database entries have expired. Once a second, much higher number of leaked sockets is reached, blocklistd becomes unable to receive new adverse event reports. An attacker may take advantage of this by triggering a large number of adverse events from sacrificial IP addresses to effectively disable blocklistd before launching an attack. Even in the absence of attacks or probes by would-be attackers, adverse events will occur regularly in the course of normal operations, and blocklistd will gradually run out file descriptors and become ineffective. The accumulation of open sockets may have knock-on effects on other parts of the system, resulting in a general slowdown until blocklistd is restarted.

If two sibling jails are restricted to separate filesystem trees, which is to say that neither of the two jail root directories is an ancestor of the other, jailed processes may nonetheless be able to access a shared directory via a nullfs mount, if the administrator has configured one. In this case, cooperating processes in the two jails may establish a connection using a unix domain socket and exchange directory descriptors with each other. When performing a filesystem name lookup, at each step of the lookup, the kernel checks whether the lookup would descend below the jail root of the current process. If the jail root directory is not encountered, the lookup continues. In a configuration where processes in two different jails are able to exchange file descriptors using a unix domain socket, it is possible for a jailed process to receive a directory for a descriptor that is below that process' jail root. This enables full filesystem access for a jailed process, breaking the chroot. Note that the system administrator is still responsible for ensuring that an unprivileged user on the jail host is not able to pass directory descriptors to a jailed process, even in a patched kernel.

By default, jailed processes cannot mount filesystems, including nullfs(4). However, the allow.mount.nullfs option enables mounting nullfs filesystems, subject to privilege checks. If a privileged user within a jail is able to nullfs-mount directories, a limitation of the kernel's path lookup logic allows that user to escape the jail's chroot, yielding access to the full filesystem of the host or parent jail. In a jail configured to allow nullfs(4) mounts from within the jail, the jailed root user can escape the jail's filesystem root.

In some cases, the `tcp-setmss` handler may free the packet data and throw an error without halting the rule processing engine. A subsequent rule can then allow the traffic after the packet data is gone, resulting in a NULL pointer dereference. Maliciously crafted packets sent from a remote host may result in a Denial of Service (DoS) if the `tcp-setmss` directive is used and a subsequent rule would allow the traffic to pass.

The rtsol(8) and rtsold(8) programs do not validate the domain search list options provided in router advertisement messages; the option body is passed to resolvconf(8) unmodified. resolvconf(8) is a shell script which does not validate its input. A lack of quoting meant that shell commands pass as input to resolvconf(8) may be executed.

Software which sets SO_REUSEPORT_LB on a socket and then connects it to a host will not directly observe any problems. However, due to its membership in a load-balancing group, that socket will receive packets originating from any host. This breaks the contract of the connect(2) and implied connect via sendto(2), and may leave the application vulnerable to spoofing attacks. The kernel failed to check the connection state of sockets when adding them to load-balancing groups. Furthermore, when looking up the destination socket for an incoming packet, the kernel will match a socket belonging to a load-balancing group even if it is connected, in violation of the contract that connected sockets are only supposed to receive packets originating from the connected host.

In some cases, the ktrace facility will log the contents of kernel structures to userspace. In one such case, ktrace dumps a variable-sized sockaddr to userspace. There, the full sockaddr is copied, even when it is shorter than the full size. This can result in up to 14 uninitialized bytes of kernel memory being copied out to userspace. It is possible for an unprivileged userspace program to leak 14 bytes of a kernel heap allocation to userspace.

When etcupdate encounters conflicts while merging files, it saves a version containing conflict markers in /var/db/etcupdate/conflicts. This version does not preserve the mode of the input file, and is world-readable. This applies to files that would normally have restricted visibility, such as /etc/master.passwd. An unprivileged local user may be able to read encrypted root and user passwords from the temporary master.passwd file created in /var/db/etcupdate/conflicts. This is possible only when conflicts within the password file arise during an update, and the unprotected file is deleted when conflicts are resolved.

On 64-bit systems, the implementation of VOP_VPTOFH() in the cd9660, tarfs and ext2fs filesystems overflows the destination FID buffer by 4 bytes, a stack buffer overflow. A NFS server that exports a cd9660, tarfs, or ext2fs file system can be made to panic by mounting and accessing the export with an NFS client. Further exploitation (e.g., bypassing file permission checking or remote kernel code execution) is potentially possible, though this has not been demonstrated. In particular, release kernels are compiled with stack protection enabled, and some instances of the overflow are caught by this mechanism, causing a panic.

The fetch(3) library uses environment variables for passing certain information, including the revocation file pathname. The environment variable name used by fetch(1) to pass the filename to the library was incorrect, in effect ignoring the option. Fetch would still connect to a host presenting a certificate included in the revocation file passed to the --crl option.

The command ctl_persistent_reserve_out allows the caller to specify an arbitrary size which will be passed to the kernel's memory allocator.

The NVMe driver queue processing is vulernable to guest-induced infinite loops.

The hda driver is vulnerable to a buffer over-read from a guest-controlled value.

A guest can trigger an infinite loop in the hda audio driver.

The virtio_vq_recordon function is subject to a time-of-check to time-of-use (TOCTOU) race condition.

The NVMe driver function nvme_opc_get_log_page is vulnerable to a buffer over-read from a guest-controlled value.

An insufficient boundary validation in the USB code could lead to an out-of-bounds read on the heap, which could potentially lead to an arbitrary write and remote code execution.

Concurrent removals of certain anonymous shared memory mappings by using the UMTX_SHM_DESTROY sub-request of UMTX_OP_SHM can lead to decreasing the reference count of the object representing the mapping too many times, causing it to be freed too early. A malicious code exercizing the UMTX_SHM_DESTROY sub-request in parallel can panic the kernel or enable further Use-After-Free attacks, potentially including code execution or Capsicum sandbox escape.

An insufficient boundary validation in the USB code could lead to an out-of-bounds write on the heap, with data controlled by the caller. A malicious, privileged software running in a guest VM can exploit the vulnerability to achieve code execution on the host in the bhyve userspace process, which typically runs as root. Note that bhyve runs in a Capsicum sandbox, so malicious code is constrained by the capabilities available to the bhyve process.

The function ctl_write_buffer incorrectly set a flag which resulted in a kernel Use-After-Free when a command finished processing. Malicious software running in a guest VM that exposes virtio_scsi can exploit the vulnerabilities to achieve code execution on the host in the bhyve userspace process, which typically runs as root. Note that bhyve runs in a Capsicum sandbox, so malicious code is constrained by the capabilities available to the bhyve process. A malicious iSCSI initiator could achieve remote code execution on the iSCSI target host.

The ctl_request_sense function could expose up to three bytes of the kernel heap to userspace. Malicious software running in a guest VM that exposes virtio_scsi can exploit the vulnerabilities to achieve code execution on the host in the bhyve userspace process, which typically runs as root. Note that bhyve runs in a Capsicum sandbox, so malicious code is constrained by the capabilities available to the bhyve process. A malicious iSCSI initiator could achieve remote code execution on the iSCSI target host.